Cannot log into T61 from remote computer with wired network and Windows Explorer.

Hi,
I am using a T61 7662-cto with Windows 7 Professional
When the T61 is connected on the home network with the wired network, I am not able to log into it remotely from another computer. On my second computer, I see the T61 with Windows Explorer but instead of getting the login window, it appears a Network Error with the message:
“Check the spelling of the name. Otherwise, there might be a problem with your network.” With a error code 0x80070035, “The network path was not found.” I tried the “Diagnose” button but it doesn’t give solution.
When the T61 is wireless connected, there is no problem. I can access it from my second computer.
I never have problem to connect to the second computer from the T61 with any connection type . I just updated the Intel Wireless LAN (bg, abg, abgn) for Windows 7 – ThinkPad, with the drivers required but it changes nothing.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73611
Do you have a hint for this issue why the wired network gives problem?
Thanks

Open this post, go to the flagged message. On its right is a button
to turn off the flag.
I went to the site. The only problem I had was one has to sign in
to see anything. Even the main page had a very large ''Please
Sign In'' covering the window.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Similar Messages

  • Cannot log into WGM from remote machine

    I have tired on two separate machines to get into WGM to my OS X Server 10.4.10. It is an OD Master. When I enter is the valid diradmin and password I get the following error message:
    "The server failed to accept the login information you provided. Check the Name and Password and try to log in again or contact your network administrator."
    I can log on to the server directly and it all works. I am rather miffed.
    No solutions when googling.
    Any ideas?

    Ended up calling Apple and the brilliant David solved it. He had me go in as root using WGM from my client machine, which worked! It seems that both the diradmin and administrator accounts had the "administer the server" boxes unchecked.
    I promise I didn't uncheck them. He did tell me that this sometimes happens, so root is the backup.

  • When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history pa

    When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history page etc. Happens on all options that should open new page. I am so frustrated, this has been happening since Firefox updated itself 2 days ago to Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 ( .NET CLR 3.5.30729; .NET4.0C) was fine before that. using windows vista. Can you please advise what I should do? Also can you go back to previous version? Error console eg
    Warning: Error in parsing value for 'cursor'. Declaration dropped.
    Source File: https://ib.nab.com.au/nabib/styles/menu_nab.css?id=009
    Line: 116
    ib.nab.com.au : server does not support RFC 5746, see CVE-2009-3555 and Warning: Selector expected. Ruleset ignored due to bad selector.
    Source File: https://ib.nab.com.au/nabib/styles/nabstyle.css?id=014
    Line: 837
    == This happened ==
    Every time Firefox opened
    == 2 days ago after update.

    Do you have that problem when running in the Firefox SafeMode?
    [http://support.mozilla.com/en-US/kb/Safe+Mode]
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this:
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • Cannot log into Pinterest from Firefox

    For the past few weeks, I've been unable to log into my Pinterest account. I use Firefox as my primary browser. I've gone back and forth with Pinterest tech support, to no avail, and they sent me here. <eye roll> I've tried all the easy things...deleting cache and cookies, trying in safe mode, trying with another browser, making sure the browser is up to date, etc. Pinterest won't let me log in on IE or Chrome either, on this computer; yet on my Windows Surface tablet, I can log in with no trouble.
    Here's the error message I get: The connection was reset
    The connection to the server was reset while the page was loading.
    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
    I didn't add any software right before this happened. I have always been able to get into Pinterest with no trouble, up till now. Does anyone have any suggestions?
    Thanks,
    Elizabeth

    Open this post, go to the flagged message. On its right is a button
    to turn off the flag.
    I went to the site. The only problem I had was one has to sign in
    to see anything. Even the main page had a very large ''Please
    Sign In'' covering the window.
    Many site issues can be caused by corrupt cookies or cache.
    * Clear the Cache and
    * Remove Cookies<br> '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
    Type '''about:preferences'''<Enter> in the address bar.
    * '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
    * '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
    If there is still a problem,
    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Type '''about:preferences#advanced'''<Enter> in the address bar.
    Under '''Advanced,''' Select '''General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites. Are there any problems?
    Then restart.

  • HT2623 I forgot the password for my .mac account and cannot log into it from Apple Mail.  I have an iCloud mail account but did not convert my .mac account to iCloud.  How can I log into my .mac or .me email?

    I set up .mac, including email, around 2006.  I believe my .mac account became a .me account, but I continued to receive email sent to .mac until about March 2013. 
    I accessed my .mac account using Apple Mail on an iMac running OS X 4.11.  I'm still using that machine.
    In July 2013, I upgraded my MacBook Pro to OS X 8.5, bought an iPod Touch and set up an iCloud account.
    I forgot my .mac password and I want to open an email message sent to my .mac email account. 
    When I attempt to log into my .mac account using Apple Mail, my password attempts are rejected by a .me mail server.
    Is there any way I can restore my access to my .mac or .me email?
    Thanks,
    William Postman

    Welcome to the Apple Community.
    Try...
    iForgot.com

  • Logging into a previously working website with same username and password

    I am now unable to log into a previously used website for work after I cleared safari's history and website data. I am using the same username and password as previously performed before it was cleared. I am able to log in on my desktop at work using the same username and password. How do I fix?

    Although LiveCycle will allow you to create two users with the same user ID (each in different domains) it is not recommended for the reson you are experiencing.  The domain is not used in the authentication, LiveCycle attempts to authenticate with the first user id it locates that matches the supplied user id.
    In your example, The first instance of "user1" that LiveCycle is finding happens to be part of "Domain1", this is why SecuredDoc1.pdf can be opened and SecuredDoc2.pdf can't be opened (the user1 that is a member of the policy applied to the second document is not the user that has been authenticated).
    You need to keep all user ids unique.
    Regards
    Steve

  • Connection to Oracle from remote computer in local network

    I have local network with two computers: WinXP with Oracle 10g and Vista with Oracle Client tools. I need to connect to the Oracle 10g from the client PC with sqlplus and with Enterprise Manager Console. Sqlplus returns ORA-12154 error, EM console returns ORA-12541 error.
    Is the problem in configuration of listener.ora, tnsnames.ora and sqlnet.ora on the server side and on the client side? They look like this:
    Server side:
    # tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    ORCL =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.9)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = orcl)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.9)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = orcl)
    # sqlnet.ora
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    # listener.ora Network Configuration File:
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.9)(PORT = 1521))
    Client side:
    # tnsnames.ora Network Configuration File:
    ORCL =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.0.0.9)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = orcl)
    # sqlnet.ora Network Configuration File: C:\oracle\product\10.2.0
    SQLNET.AUTHENTICATION_SERVICES= (NTS, EZCONNECT)
    NAMES.DIRECTORY_PATH= (TNSNAMES)
    Are these files configured fine? Or do I have to configure also something else? When I do tnsping 10.0.0.9 from the client, the result is OK. So what is wrong? Thanks a lot for help, Petr.

    Sqlplus returns ORA-12154 error, EM console returns ORA-12541 error- Make sure that "TNSNAMES" is listed as one of the values of the NAMES.DIRECTORY_PATH parameter in the Oracle Net profile (SQLNET.ORA)
    - Verify that a TNSNAMES.ORA file exists and is in the proper directory and is accessible.
    - Check that the net service name used as the connect identifier exists in the TNSNAMES.ORA file.
    - Make sure there are no syntax errors anywhere in the TNSNAMES.ORA file. Look for unmatched parentheses or stray characters. Errors in a TNSNAMES.ORA file may make it unusable.
    HTH

  • My computer crashed and I cannot get to my itunes.  Anyway I can log into it from another computer? I have an iphone now and want my music on it.

    Help!  I lost my itunes music. My computer crashed.  I want to move to another computer to get to my iphone. I just bought one. Love it.

    It has always been very basic to always maintain a backup copy of your computer for just such an occasion.  Use your backup copy to put everything back.

  • Cannot connect to DB from remote computer (ORA-12545)

    Hello all,
    Please help, I am stumped.  I am trying to connect to a database located at my work from at home.
    I am running into the following issue (see command and error below):
    ansichart@ansivm:~/src/perl$ sqlplus aspxdba/********@aspxp2
    SQL*Plus: Release 11.2.0.3.0 Production on Thu Jul 18 21:15:09 2013
    Copyright (c) 1982, 2011, Oracle.  All rights reserved.
    ERROR:
    ORA-12545: Connect failed because target host or object does not exist
    Here is my tnsnames.ora file (I have the service_name censored out for privacy reasons):
    ansichart@ansivm:~/src/perl$ cat $ORACLE_HOME/network/admin/tnsnames.ora
    aspxp2 =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = orarac9-scan)(PORT = 1521))
        (CONNECT_DATA =
          (SERVICE_NAME = *****************)(UR=A)
    I have verified that I can establish a TCP connection to this DB server on the port specified, using the same info from the TNSnames.ora file (see below):
    ansichart@ansivm:~/src/perl$ nmap -sT -p 1521 orarac9-scan
    Starting Nmap 5.21 ( http://nmap.org ) at 2013-07-18 20:53 CDT
    Nmap scan report for orarac9-scan (10.1.13.115)
    Host is up (0.0088s latency).
    PORT     STATE SERVICE
    1521/tcp open  oracle
    Nmap done: 1 IP address (1 host up) scanned in 0.09 seconds
    ansichart@ansivm:~/src/perl$
    I have another terminal opened up to a server at work and I can connect to the DB with sqlplus just fine.  I verified that the record for this database on the tnsnames.ora file is the same as it is at work.
    In conclusion, I can connect to the Database at work, but I cannot at home, even though I am using the same connection information and verified that port 1521 is accessible on this Database server from at home.  So why can't I establish a DB connection?
    Any ideas?
    Thanks,
    Ben

    676d3153-d812-4300-9e6a-b1dc87a2ebfe wrote:
    ERROR:
    ORA-12545: Connect failed because target host or object does not exist
    This simply means "hostname unknown". In other words, the hostname used for the connection could not be resolved to an IP address.
    I have verified that I can establish a TCP connection to this DB server on the port specified, using the same info from the TNSnames.ora file (see below):
    You are verifying hostname orarac9-scan only. You are not verifying that the hostname supplied by the Oracle SCAN Listener can be resolved by your platform.
    As you are connecting to a SCAN listener, it will do its magic (load balancing/round robin/whatever) and return a redirect to your client driver - telling it where to find the service name the client requested.
    So your client driver gets a hostname and port in return. It then attempts to connect to that to establish your Oracle client-server session. If the RAC has been setup with the typical RAC hostnames, your client will get hostnames like orarac9-vip1 and orarac9-vip2 returned. Likely as FQDN too.
    This means your platform needs to be able to resolve these hostnames. It does not. Thus the error.
    In your platform's /etc/hosts file, define the complete list of RAC hostnames (SCAN, Public and VIP hostnames).

  • I cannot log into iTunes on my computer or AppleTV

    I keep getting an error message saying there was an error in the iTunes Store, try again later, any thoughts?

    I am getting timed out as well.
    I log out of the itunes store.  Within itunes, go to apps, then check for updates, it prompts for my uid and pw.  At the top of the screen I have "Accessing itunes store..."
    Finally I get the error:
    We could not complete your itunes store request.  The network connection was reset.  Make sure your network connection is active and try again.
    If I purposely put in a wrong password, I get the same error.  It would SEEM that it's not even getting to the step in authentication where it's seeing if the password is right or wrong.
    Per another thread, I tried runnning as administrator: 
    netsh winsock reset
    but that didn't fix anything.
    It's timing out on both my Win7 64bit itunes and on my iphone (both connecting with and without my WIFI, so it's not a network issue on my end since they're two different providers).
    Within itunes, at the top menu, Help, then Run Diagnostics, found no errors.  The network connectivity part of the log had this:
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-04-16 17:51:30.
    So, there are no errors.  It thinks it can get to the store and has been able to during the period that I'm coming up with this timeout. 
    Apple, look into this, please?

  • Cannot get into itunes from my computer

    Itunes previously worked for me and now im getting the error message, Itunes has encountered a problem and needs to close we are sorry for the inconvenience. Then it asks if I want to send an error report or not. When I do it takes me to a troubleshooting page, the problem with that is, nothign on that page works for me. I cannot delete quicktime either. Any step-by-step suggestions? I want to get my new music on my ipod. HELP!!

    top fixes for a new iTunes install/upgrade are
    - turning off security software such as Norton before the install as Apple suggests
    - installing QuickTime standalone, not regular
    http://www.apple.com/quicktime/download/standalone.html
    - setting up Norton to allow iTunes
    - scanning for malware with ewido (Free at www.ewido.net/en/)
    - last but not least, using MSCONFIG to find Windows conflicts
    http://docs.info.apple.com/article.html?artnum=302538
    Post back with any questions or your solution.

  • When I recieve emails on my mac they disappear from my hotmail account when I log into it from another computer.

    Is there a way to keep them on my hotmail account??

    Hi Allan ,
    Thank you for the reply,
    I have just checked that my PC at home is a Pop3 account , and I used the same setting on my ipad and iphone.
    Sorry , not being that enlightened on computers , what do I have to do ?
    I'm not understanding
    Thank you

  • TS3899 Why is the number of e-mails higher on my iPhone than in my e-mail when I log into it on my computer?  The difference between the 2 keeps climbing.

    Why is the number of e-mails higher on my iPhone than in my e-mail when I log into it from my computer?  And how do I fix it?  The number keeps climbing on my phone, making the difference between the two greater.

    You're welcome.
    In order to have the account's Sent mailbox synchronized with the server with the Mail.app on your Mac and with the iPhone's Mail application, you must store the account's Sent mailbox on the server with each. The same applies to the account's Drafts and Trash mailboxes.
    With store sent messages on the server deselected for the account preferences with the Mail.app on your Mac, create an "On My Mac" location mailbox. At the Mail.app menu bar go to Mailbox and select New Mailbox. Choose On My Mac for the mailbox location - which will be stored locally on your computer's hard drive and enter a name for the mailbox. You can name this mailbox MobileMe Sent. Select OK to create the mailbox, which will be available under "On My Mac" in the Mail.app mailboxes drawer.
    Select your MobileMe Sent mailbox. Select a sent message in the mailbox and at the menu bar go to Edit and choose Select All. Follow this - at the Mail.app menu bar go to Message and select Move To and then select the new On My Mac location mailbox in the window provided. This will move all messages from the account's locally stored sent mailbox to the newly created On My Mac location mailbox. When this transfer has been completed, re-select store sent messages on the server for the account preferences.
    Now do the same with the newly created On My Mac location mailbox where all sent messages were transferred to. Select a message in the mailbox and at the menu bar go to Edit > Select All. At the menu bar go to Message > Move To and select your MobileMe account's server stored Sent mailbox under Sent in the window provided. This will transfer all messages stored locally on your computer's hard drive from the newly created "On My Mac" location mailbox to the account's server stored Sent mailbox. These messages will no be available when accessing the account with the iPhone's Mail application.

  • Participant cannot log into workspace In BPM 10.3.1.0

    Hi, I create a project and want to test it on the workspace. I try to click on button START -> Launch workspace. The IE bring me to the page which require me to key in the username. I keyed in the username and click on button Log in. I cannot log into the worspace. The screen will refresh and require me to key in the username again. I try the same project in my collegue laptop, when she key in, she can see the other screen. It that possible of my IE setting? Thank

    is it possible that you're colleague is running studio, and you're trying to log in to enterprise?

  • Cannot log into YouTube

    Suddenly cannot log into YouTube. Using the latest sign in and double checked in on three different Macs but cannot log in using Apple TV, it just says username and password combo is incorrect.
    Anyone else found this ?

    Perhaps something in this older discussion can help you:
    https://discussions.apple.com/thread/2712659?start=0&tstart=0

Maybe you are looking for