Cannot Log-On even though the internet works fine?

Cannot Log-On even though the internet works fine? I have not made any changes to my system. Anyone else having the same problem. My handle is an AIM handle, if this helps. Is it because its the first of a new year?
Thanks in Advance!
Mark

I found out its my IM archiving company thats is down. Global Relay.
Thanks anyway!
Mark

Similar Messages

Firefox cannot display websites even though the laptop is connected

Firefox is my primary browser and it suddendly stopped working. My laptop is connected to the Internet wirelessly and I can use Skype and access my VPN but I cannot get on any website with Firefox nor with Internet Explorer. I don't know what to do.

Can people email me at [email protected]?

Why does the amber light stay on even though the WiFi works?

My WIFi just stopped yesterday.
Initially nothing worked. I then Restarted the router—then the Airport Extreme–NOTHING. I called Apple support. He had me push the re-start button and a few other things. I can now get on WIFi, but the amber light still stays on. Why? Although my Mac works great, my iPhone doesn't.
Any ideas?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref:Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

When I try to open Firefox, it says that "the proxy server is refusing connections." What settings do I need to change? Even though the internet signal is strong, I can't open any webpages.

It also says that Windows cannot connect to the Internet using HTTP, HTTPS or FTP. This is probably caused by Firewall settings on this computers. Check the firewall settings for HTTP port (80), HTPPS prot (443) & FTP port (21).
This all started when I tried to tried to delete the Verizon Broadband toolbar and home page that always opened when I opened Firefox.

In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".
See "Firefox connection settings" in [[Server not found]]
You can find the connection settings in "Tools > Options > Advanced : Network : Connection"<br />
If you do not need to use a proxy to connect to internet then select No Proxy

I am connected to a time capsule both wirelessly and through ethernet...and state of the time capsule is solid green...the internet however doesn't work...The internet works fine when directly connected to my macbook pro but it won't work through the tc

I have deleted time machine preferences...restarted the modem a bunch of times, restored time capsule to it's original settings...after I first set it up in Airport Ulitity its shows a page quickly that states there is a internet problem, but the page quickly goes away before I can read what it says exaclty and states the internet connection problem is resolved...
However it's not resolved, I'm also having trouble doing a back up to my time capsule...I recently purchased a new macbook and retrieved/restore what was on the time capsule to the new computer...that worked fine...wireless worked fine...however when I tried to back up the new macbook...it would faii stating that there isn't enough room on the TC to do a back up...
I didn't end up keeping the new macbook, I was just using it/trying it out while my current macbook pro was being repaired (logic board)
Ever since I got my current macbook back from repair...my backups have failed due to their not being enough space to perform the back up...in the past the back ups would happen and old back ups would be replaced...
I think this has to do with my current computer having a new name after the repair..."Adam's macbook pro 2" vs "Adam's macbook pro"
The internet was working fine wirelessly through the TC a day ago, but it wasn't allowing my other laptop that was connected via ethernet access to the internet...I had a self assigned IP address error then...I don't have that problem now, but it's not transmitting internet at all...even though it's in a solid green state.
I have no problem completely wiping out my TC including the previous back ups on it...just don't know how to go about it...I have restored it to factory settings a bunch of times and created the network from scratch...just hasn't fixed the issue
Is there more prefences files I should delete

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

My new ipad 2 freezes after using the internet for about 15 minutes. It is properly connected to the network and works fine after I re-start it but it is very annoying to have to re-start it every so often. All other laptops on the internet work fine.

My ipad 2 freezes when using the internet. Re-starting the ipad fixes the problem but it is very annoying to have to do this. I have tried all of the trouble shooting suggestions including re-joining the network. All other laptops work fine on my network. I think there is something wrong with my new ipad.

I recommend two things before taking your iPad back to the Apple Store.
1. Fully close safari, by going to your home screen, then double tapping your home button to bring up your most recently used Apps. Using your finger, hold it on any of the used Apps until they jiggle. At this point, you'll see a to the top left of each App. Touch the sign on Safari, which will fully close it.
Then.......
2. Reboot your iPad. Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (hold past the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart. You won't lose any settings or data.
If that does not help, then make an appointment at the Apple store to have your iPad checked.

I keep getting a message that pops up about every 15 minutes that says server connections interupted. the internet works fine and is fast. What does it mean?

I recently installed a 2TB time capsule and everything works fine but keep getting a server connections interrupted. What does that mean and how do I get rid of it.
thanks
john

It means Apple have done a lousy job with Lion or ML and TC networking.
Read this thread from the last post backwards.. there are a number of work arounds discussed.
https://discussions.apple.com/thread/3526741?tstart=30
not all work for all people everywhere.. some work sometimes for some people.

Firefox 4 won't let me save any image off the internet (works fine with IE)

Ok...Firefox 4 won't let me save any image off the internet. It will let me right click on the image, but I won't let me choose a file type..like jpeg.
I couldn't figure it out so i completely uninstalled firefox then reinstalled. I'm still having the same problems.
I can save images normally with IE.

Yahoo! mail? There are a variety of suggestions but not yet a confirmed solution in this thread: [https://support.mozilla.org/en-US/questions/971042 Firefox suddently stopped downloading email attachments.]

My iPad won't load web pages, even though it was working fine two days ago.

Up until 2 days ago I had no problems with my iPad 3.
However now it will not load any web pages at all (Using Safari). In order to get it to load web pages I either
have to reboot or turn it off and then on again. It then connects but only ever to one page at a time.
I don't understand what the issue is since it was fine before. It is not my Wifi network as it works fine on
other laptops.

Try this:
1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down until you see the Apple Logo.

ITunes cannot find files even though the path is correct in Preferences

Hello: I have a problem that is not addressed in any support article.
When I click to play a song in iTunes, I get the message that iTunes cannot find the original file.
When I check Preferences > Advanced > iTunes folder locations, I see all of my files there, but iTunes does not.
I have reset, consolodated the library, and performed all tasks noted in the support articles. Still no luck.
Can anyone help?
Thanks very much.
Tophersteele
PowerPC G5 iMac Mac OS X (10.4.8)

I had the same thing happen and have been pulling my hair out about this for a week now. Finally today I hit on a fix that worked for me and I hope it works for you.
For this to work, you need a backup of the last saved iTunes Library file.
First, follow directions about locating your iTunes music folder. In prefs>advanced choose your location and make sure that is right.
Locate your last saved iTunes Library file (the one that was working before things went haywire with the !'s everywhere). Also locate the iTunes prefs file in ~/library/prefs. For me, these were part of a Backup, so I selected "restore" ONLY THESE particular files from my last backup. When prompted to replace existing files, I said YES.
After backup ran, restoring the old Library and replacing the corrupted one, I relaunched iTunes and VOILA. All files were now correctly linked.
This left one last task, re-importing all songs I'd imported since that previous backup. To find these, I sorted my music folder by date modified and checked the most recent songs against the most recent in my Library. (sort your iTunes LIbrary by "Date Added", which you can add manually if it's not part of your categories bar.

[SOLVED] GCC returns error, even though the code works.

# Edit: 0740 // 7.1.14
# Thanks to Hurricane for his answer.
# If you came here with the same question, simply replace 'gcc' with 'g++'.
# Many thanks to all who answered.
I'm new to arch but have used GCC on windows before. I decided to try a simple hello world program (~/code/hello.cpp) but when I went to make an executable, I get the following error:
[simple@arch ~]$ gcc ~/code/hello.cpp -o ~/code/exe/hello
/tmp/ccUO8tkq.o: In function `main':
hello.cpp:(.text+0xa): undefined reference to `std::cout'
hello.cpp:(.text+0xf): undefined reference to `std::basic_ostream<char, std::char_traits<char> >& std::operator<< <std::char_traits<char> >(std::basic_ostream<char, std::char_traits<char> >&, char const*)'
hello.cpp:(.text+0x14): undefined reference to `std::basic_ostream<char, std::char_traits<char> >& std::endl<char, std::char_traits<char> >(std::basic_ostream<char, std::char_traits<char> >&)'
hello.cpp:(.text+0x1c): undefined reference to `std::ostream::operator<<(std::ostream& (*)(std::ostream&))'
/tmp/ccUO8tkq.o: In function `__static_initialization_and_destruction_0(int, int)':
hello.cpp:(.text+0x4a): undefined reference to `std::ios_base::Init::Init()'
hello.cpp:(.text+0x59): undefined reference to `std::ios_base::Init::~Init()'
collect2: error: ld returned 1 exit status
For reference, here is the code in hello.cpp
#include <iostream>
using namespace std;
int main()
cout << "Hello world!" << endl;
return 0;
I've tried to make sense of the error, but I don't understand it.
Any help is greatly appreciated. Thank you.
Last edited by simplesquare (2014-01-05 12:41:55)

g++ ~/code/hello.cpp -o ~/code/exe/hello
That should do the trick.
GCC is just a front-end that chooses the right compiler depending on the suffix of the file(s) being passed in.
The problem with using GCC to compile a C++ program is that it' won't link C++ by default. If you noticed,
what returned the error was ld, which is the GNU linker.

Has anyone ever had a problem with your iphone working outside your home but not inside. The internet works fine in and outside of the house

Has anyone had problems with your iphone working outside of the house, but not inside? Cannot make or receive calls, nor can I send or receive any text messages. This is something that just happened out of nowhere. Can I get some help please?

Did you used to have service and now suddenly you don't?
This happened to me a few years back, and several other iPhone users in my neighborhood, and after a while on the phone with AT&T they figured out that a technician had recently adjusted the receiver/sender on the tower and it was slightly off. They sent them back up and I actually had a better signal after than I did before it went out.
I would call AT&T and explain the issue you are having and see if they can fix it.
If you never had service there then like wjosten said it's probably just a bad zone.
Hope you get it sussed out.
-PM

Hi, I have a MacPro and can't get it to connect to my emails or Chrome / Safari to work. The Internet works fine on my iPads; I have used the network diagnosis tool to check that the Ethernet connection is fine, and it is. Help, please?

I don't have another computer that I can connect to the Ethernet; and its not really practical to move the Mac Pro nearer to the Airport Express to get wifi signal. I've tried turning everything completely off (including taking the plug out of the socket), but it still doesn't work. Any ideas, please?

Desperate times call for desperate measures:
System Preferences > Network > Ethernet > (Assist Me) > Assistant ...
... and set it up again, being sure to specify a new "Location". Do not keep the "Automatic" one, create a new one or accept the default (current date&time).
A "Location" is a basket of settings from all over the place that could influence how your network connection behaves. Thye were invented to collect together such stuff so that you could switch fro "Home" to "Work" to "StarBux" just by specifying the Location, and all the settings needed would be pulled together and applied at once.
Sometimes a stray setting gets included by accident, and a new setup eliminates that stray setting and it perks up and works afterward.

My email refuses to accept password and I can't receive emails even though webmail is working fine.

I've contacted BigPond and been told its because of keychain access, but have checked all keychain and deleted and redone keychains. Deleted email account and reinstalled. checked all my passwords and settings in prefs in Mail. Don't know if this is related to recent security prob I had with Apple ID that was being hacked as I kept getting messages to reset my id. Went to apple support and setup the 2 step security but was still getting emails about id reset, so don't know if this started the problem. Am ready to scream!

See if turning off SSL works. That is in Mail > Preferences > Accounts (your account) > Advanced button
and deselect Use SSL.
Mac OS 10.6.8
Mail 4.6

After using my macbook for 2 years with same printer,all of a sudden I can't print a page doc even though printer is working and I can print from I/Mail, etc.Anybody had this happen and have a possible answer?

After using my MacBook Pro and pages for 2 years with the same printer, all of a sudden I can't print a pages doc even though the printer works and I can print from I/Mail, etc. Anyone have a possible answer?

Often printing problems are a sign of corrupt preferences. Go to HD > Users > (your account) > Library > Preferences, delete the com.apple.iwork.pages.plist file & then restart Pages.

Cannot Log-On even though the internet works fine?

Similar Messages

Maybe you are looking for