Cannot log on to exchange server

I have Torch 9800 and had no problem with synchronizing it with my calendar, address book and notes. Then I updated the Desktop Manager to the newest one and after that I´m getting this message:
"Cannot log on to Exchange Server. Please check server access or provide a valid password"
I´m not using an Exchange Server and as I said before it only occurred after upgrading the Desktop Manager.
I would appreciate if someone could help me and provide me with a step by step instruction as I´m not the best one in computers :-)
The Enterprise Account Settings are set to NONE.
Thanks,
A Jonsson
Solved!
Go to Solution.

I found this on another website and it did the magic :-)
SOLUTION: Assuming you have the latest Desktop Manager installed from BB, with both BB & OL 2010 closed
1.Open Control Panel and click Mail
2.When the window pops up, click on Show Profiles
3.Select your profile and click the Copy button. Name the copy whatever you want - we won't be keeping it around long.
4.Start Desktop Manager and connect your BB.
5.Start configuring your Organizer, but choose the copy profile for any item. Click OK when DS asks about remapping folders.
6.After configuring any Outlook component, click OK until you get back to your main DS window. At this point, you should not get the previous error message.
7.Go back into DS and configure all your Outlook components with your original profile. You will get the folder remapping message again - just click OK.
8.When you're done, click OK until you're back at the main DS window. You shouldn't get any error messages at this point.
9.From Control Panel, go back in to Mail and delete the duplicate profile you previously created.

Similar Messages

Cannot Connect to Mail Exchange Server Today

I updated to 10.6.4 last night. This morning I cannot access my email from my Mac from my company Exchange Server. I can do so from my iPhone. I assume something went wrong with the update--don't know. I have had the IT guy here at my computer this morning and he cannot figure out what is wrong. He tried to set up an Exchange email account for his own account from my computer but that failed also. Any ideas?

The problem has been corrected when our IT guy reset the IIS Admin Service on the Exchange Server.

Cannot connected with google exchange server after iphone replacement

Today I replaced my iPhone 5 because of some issues, but after I restored my iPhone I found that the iPhone could not connect to the google exchange server. The alert "Cannot get mail - the connection to the server failed" will be shown.
I am 100% sure the setting is correct & work. It is because I have been used this setting many many years and this is 100% work fine on my iPad 2, 6.1.2 (same version). I have tried to delete my account re-add the account many many times reboot and reboot airmode etc, I could use the simple Gmail one but I really need Exchange service.
Please help, it really make me crazy

My understanding is that as of Jan 30th Google no longer supports Exchange for free Gmail accounts (see http://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/).

Cannot open EMC on exchange server

I am having a strange problem. I have an exchange 2010 server on windows 2008 r2 that has been working perfectly for more than a year. Now suddenly I can't open the EMC or even the EMS.
I get this error,
"The attempt to connect to the server using kerberos failed..............connection to the specified remote host was refused. Verify that the WS-Management service is running on the remote host and configured to listen for requests on the correct
port and HTTP URL"
I have tried everything I can think of, winrm quickconfig and
WinRM enumerate winrm/config/listener both seem to be normal.
in IIS, the "MsexchangePowershellAppPool" application pool is running and under powershell Virtual directory both
kerbauth and WS-Man are native and local.
I don't know what else to do and how to get this EMC (and EMS) to work again.....

Try following
Method 1:
Close all MMC/EMC instances before proceeding.
Open Registry Editor (regedit) as the user you run the EMC under.
Go to
HKEY_CURRENT_USER\SOFTWARE\Microsoft\ExchangeServer\v14\AdminTools
Look for value NodeStructureSetting.
If it is there, back it up and then remove it.
Method 2:
Close all MMC/EMC Instances before proceeding.
Open Powershell or Powershell IDE as the user you run the EMC under and execute the following command:.
Remove-ItemProperty -Path HKCU:\Software\Microsoft\ExchangeServer\v14\AdminTools\ -Name NodeStructureSettings
Close Powershell
After performing either of the methods above to remove the registry entry you should be able to open the Exchange Management Console and it will discover another Exchange server and connect.
Lrok

Cannot Send Pictures with Exchange Server

Hi All,
Need some suggestions. We are having trouble with some of the iphones not being able to send pictures through the exchange server with OTA Activesync. We are running 3.1.2 on the phones and we have tried with and without setting up a virtual directory. We have also tried hard resetting the phones with the issue but still having trouble. All updates have been completed on the exchange server.
Thanks!
Peter Braunston

Couple of common soloutions:
Delete your Mail account from iPhoto -> Preferences -> Accounts and re-enter them
Use the Stationery Templates in Mail instead - there are more and a greater variety
Regards
TD

Cannot log in to OSX Server using ARD

I am struggling with a problem that I cannot figure out. I posted this on the ARD discussion group and did not get a reply.
I use ARD, latest version, all updates, to remotely control about 9 machines across two locations that are linked by a pair of NetGear FVS124G routers connected by fulltime VPN. All of the Macs are running 10.5.4, all have the latest updates across the board, as do the single OSX servers in each location both of which are running OSX 10.5.4 server with current updates.
I can access all of the workstations using ARD without difficulty, both locally and across the VPN.
The servers will not authenticate, returning the message, "Authentication failed to ....... Server"
The message seems straightforward enough, its cause more obscure, and I get the same message on each of the two servers.
The login I am attempting to use in ARD is an administrator account, sharing on the servers is set to allow full access in the sharing setting in System Preferences in both servers, and I have no trouble using either the server preferences or server admin tools to control the two servers.
It is just that ARD won't allow the login that works with either local login or the server tools. I am able to login to each server with SSH without difficulty.
In checking the two servers, I am surprised to see them both listed in ARD info page as OSX 10.4.11 clients (which they clearly are not), whereas they are both listed (accurately) as running the current ARD client.
I suspect something fairly simple in my configuration of the two servers that I am overlooking since I can log into all the OSX workstations at either location from ARD at either location.
Any help will be greatly appreciated.

Thank you for your response. As I think I understand what you are saying, you do not use the "all users" setting for remote access in the server settings, and then allow ARD to provide remote control.
I have used the all users setting for ARD, and will try changing this on the servers. The other settings are already as you suggest.
Thanks and will see if this works....

I have just restored my pavilion DV6 back to factory and cannot log onto my email server?

DV6 Product XE062EA#ABU
Just tried reinstalling back to factory for my wife and all went well except no email client will work, tried , live mail, outlook 2007, trial outlook 2010 and thunderbird with no success, tried imap and pop again with no success. tried logging onto my known good email account.
Tried removing the pre installed norton av again no luck, things were getting a bit flakey after all of the install/uninstalls so restored it one more time but this time only installed windows live mail and the pre installed office starter edition and still cant log on to an email server
Unable to send or receive messages for the Kilmartin (sophie) account. The connection to the server has failed.
Server: 'mail.kilmartin.it'
Windows Live Mail Error ID: 0x800CCC0E
Protocol: POP3
Port: 110
Secure(SSL): No
Socket Error: 10061
Can anybody shed any light? its as if the restore image isnt working correctly as it used to work great on the original build?
Cheers
Rich
(MCSE NT4/W2K/2003/Vista)

Just have to give it some time. The activation and verification servers are all slammed right now 'cause of all the people trying to update at the same time. Give it a couple hours (or overnight if you can wait) and it should sort itself out.
= L.I.

How to Properly Protect a Virtualized Exchange Server - Log File Discontinuity When Performing Child Partition Snapshot

I'm having problems backing up a Hyper-V virtualized Exchange 2007 server with DPM 2012. The guest has one VHD for the OS, and two pass-through volumes, one for logs and one for the databases. I have three protection groups:
System State - protects only the system state of the mail server, runs at 4AM every morning
Exchange Databases - protects the Exchange stores, 15 minute syncs with an express full at 6:30PM every day
VM - Protecting the server hosting the Exchange VM. Does an child partition snapshot backup of the Exchange server guest with an express full at 9:30PM every day
The problem I'm experiencing is that every time the VM express full completes I start receiving errors on the Exchange Database synchronizations stating that a log file discontinuity was detected. I did some poking around in the logs on the Exchange server
and sure enough, it looks like the child partition snapshot backup is causing Exchange to truncate the log files even though the logs and databases are on pass-through disks and aren't covered by the child partition snapshot.
What is the correct way to back up an entire virtualized Exchange server, system state, databases, OS drive and all?

I just created a new protection group. I added "Backup Using Child Partition Snapshot\MailServer", short-term protection using disk, and automatically create the replica over the network immediately. This new protection group contains only the child partition
snapshot backup. No Exchange backups of any kind.
The replica creation begins. Soon after, the following events show up in the Application log:
=================================
Log Name:      Application
Source:        MSExchangeIS
Date:          10/23/2012 10:41:53 AM
Event ID:      9818
Task Category: Exchange VSS Writer
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      PLYMAIL.mcquay.com
Description:
Exchange VSS Writer (instance 7d26282d-5dec-4a73-bf1c-f55d5c1d1ac7) has been called for "CVssIExchWriter::OnPrepareSnapshot".
=================================
Log Name:      Application
Source:        ESE
Date:          10/23/2012 10:41:53 AM
Event ID:      2005
Task Category: ShadowCopy
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      PLYMAIL.mcquay.com
Description:
Information Store (3572) Shadow copy instance 2051 starting. This will be a Full shadow copy.
=================================
The events continue on, basically snapshotting all of Exchange. From the DPM side, the total amount of data transferred tells me that even though Exhange is trunctating its logs, nothing is actually being sent to the DPM server. So this snapshot operation
seems to be superfluous. ~30 minutes later, when my regularly scheduled Exchange job runs, it fails because of a log file discontinuity.
So, in this case at least, a Hyper-V snapshot backup is definitely causing Exchange to truncate the log files. What can I look at to figure out why this is happening?

All sub-folders in Mac Mail cannot synchronize with Exchange Server 2010

Hi all,
All sub-folders under Inbox in Mac Mail cannot be synchronized with Exchange Server 2010. There are 2GB messages size in Inbox folder and 500MB messages size under Inbox's sub-folders. All messages can be sent out and received and it can work in Outlook 2007 and Outlook 2010 normally. However, all messages in sub-folders cannot be synchronized (empty sub-folders).
Does this problem relate to message synchronization order of Mac Mail with Exchange Server? Do all sub-folders messages be synchronized after synchronization complete of Inbox? The synchronization of sub-folders will not happen if the synchronization of Inbox does not complete, doesn't it?
All messages synchronization is over internet. Can anybody help?
Thanks a lot
DT1640759

Hi,
1.please check the mailbox send and receive quota for exchange 2013 migrated mailbox.
2.Please check the email attributes of the exchange 2013 migrated mailbox because it seems to be a problem with that particular mailbox.
3.Then do the message tracking and that would be the only way to find the where the send messages has gone.
4.Please check and confirm you have an enough space on the disk where exchange queue database is residing.
I think I need to create a receive connector in the 2013 to receive from 2010 ?
No need ,by design exchange 2013 cas server default frontend receive connector will be having an
entire ipv4 and ipv6 segment and anonymous connection is checked by default.
I think I also need to create a send and receive connector for 2013 users to each other?
No need , an intra organisation send connector and the default receive connectors in exchange will be used
for internal mail flow between the exchange 2013 users.
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Messaging tracking logs filename format changed in Exchange Server 2013 sp1

Hi,
I have noticed that the file name format is changed for exchange server 2013 sp1.
Now it will have hh attached to it like
MSGTRKMSyyyymmddhh-n.log;
MSGTRKMDyyyymmddhh-n.log:
MSGTRKyyyymmddhh-n.log.
So the "hh" will goes from 00 to 23 for single day.
So Lets say at 24 april 2014 first fill is created @7.30 AM, so the first file name will be
MSGTRK2014042400-1.log. Now exchange server will create new file every hour by incrementing hh part of file name. Now the last file i.e
MSGTRK2014042423-1.log will be created on 25 April 2014 at 6.30 AM.
I am not able to understand why exchange server is creating the file with old date on next day ( with 24 April on file name time stamp on 25 April).
And also how it will be decided to create the first file @ 7.30 AM.
Can anyone explain to me about this ? Why it is happening like this?
Thanks
Sandeep Gupta

Hi Sandeep,
This could related to the time difference. What’s the time zone of your server? In my lab, many files in the last day were created in the next day. For example, files in 20140410
were created on 20140411.
Also, as you mentioned, the file name format is as:
MSGTRKMSyyyymmddhh-n.log;
MSGTRKMDyyyymmddhh-n.log:
MSGTRKyyyymmddhh-n.log.
However as I know, the format is like
MSGTRKyyyymmdd-m.log, it will not have “hh”(you mean hours) in the behind and the file is not created every hour but create a new file when the old is full. So please capture some screenshots of the message tracking files
and the date/time information of the file to verify.
Title: Message Tracking
Link:
http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx
Regards, Eric Zou

Network users cannot log in to server

I have set up a new server from scratch on a new Macmini. In the main, it works absolutely fine. Users can log into the sever from client device as registered user and can share the screen with no problem.
The users are set up as local network users and are in a local group and a network group. I set them up using Workgroup manager after setting up Open directory. All users cn be seen from OD and WM. However, they cannot log in to the server directly - only the server adminstrator can do that. Home drives etc are all set up fine.
Any help will be greatly appreciated.
F

Administrators always have access, you may have blocked Network Users from having access using Workgroup Manager 10.8.
Open Workgroup Manager 10.8
Authenticate to the local directory as an administrator.
Go to the machines section and select the server where users cannot log in.
Click the preferences icon to see the preferences for that computer set through WM 10.8
From the overview choose Login.
Choose the Access tab and set Manage: to Never.
Message was edited by: Mark23

Calendar cannot connect to exchange server

(MacBook Pro 2014)
I have Exchange Mail - which works perfectly (and G-mail), but my calendar cannot connect to the Exchange Server. I use the correct password but nothing is working! I have uninstalled the account and re-installed but this does not help.
Has anyone experienced this issue - and if so do they have a fix?
Colm.

Can't add an exchange account to Mac Mail
Mavericks iCal won't talk to Exchange Calendar

Mail Receive from outside in Exchange server 2010 (Accepted Domain)

Hello All
Two Exchange 2010 server running existing environment. in front of two exchange server have McAfee firewall. This McAfee Firewall receive the mail from outside and send it to Exchange 2010 server.
for example abc.com is working well to send and receive mail using exchange server. recently i have add
Accepted Domain which is bcd.com. But this Accepted Domain can not receive mail from outside. I have configure MX record, Accepted Domain and also mail point. but the problem is that mail cannot receive from outside
domain. i have also several time modify the receive connector but abc.com work but bcd.com not work
Please suggest.
Error:
firewall.abc.com rejected your message to the following email addresses:
[email protected] ([email protected])
firewall.abc.com gave this error:
<[email protected]>... Relaying denied
Your message wasn't delivered due to a permission or security issue. The address may only accept email from certain senders or another restriction may be preventing delivery. For more tips to resolve this issue see
DSN code 5.7.1 in Exchange Online. If the problem continues contact your help desk.

Have you checked the SMTP protocol log on the Exchange server? Do you see the 5xx status code in the log when a message is sent to the @bcd.com domain?
If you see the 5xx status code for that domain, check the "Accepted domains" and verify that you didn't make any typos in the domain name. If it looks okay then stop and start the transport service on the Exchange servers and retest.
If you don't see the 5xx status message for that domain you should check the machine firewall.bcd.com and verify that it's configured to accept e-mail for the @bcd.com domain. I'm guessing that the firewall.bcd.com machine is acting as a SMTP proxy and not
as a SMTP relay. However, if there are SMTP log files on that machine you should check them and see which IP address is returning the 5xx status message.
--- Rich Matheisen MCSE&I, Exchange MVP

E50 Mail for Exchange - "Exchange Server Error" co...

Mail for Exchange cannot synchronize with the Exchange Server. The most usefull information can be found in the IIS log for the ActiveSync Server. (Se below)
Does any one know what the error code 1236 refers to?
2007-02-23 14:39:36 158.39.96.10 OPTIONS /Microsoft-Server-ActiveSync User=akvaplan%5Cjos&DeviceId=IMEI251892015795724&DeviceType=IMEI351892015799724&Log=VNATNASNC:0A0C0D0FS:0A0C0D0SP:0C0I0S0R0S0L0H 80 - 212.17.141.53 NokiaE50/1.0 200 0 0
2007-02-23 14:39:50 158.39.96.10 POST /Microsoft-Server-ActiveSync User=akvaplan%5Cjos&DeviceId=IMEI251892015795724&DeviceType=IMEI351892015799724&Cmd=FolderSync&Log=VNATNASNC:0A0C0D0FS:0A0C0D0SP:0C0I0S0R0S0L0H 80 - 212.17.141.53 NokiaE50/1.0 500 0 1236

Finally found the solution, and thought to post it in case someone else has the same problem.
First make sure ActiveSync at the Exchange server is set up correctlt. Follew the instructions at http://support.microsoft.com/?kbid=817379 , method 2
BUT the article is wrong at points 13 and 14:
13. Under IP address and domain name restrictions, click Edit.
14. Click Denied access, click Add, click Single computer, type the IP address of the server that you are configuring, and then click OK.
If you skip these points (do not deny access to all), it works!

Exchange Server 2003 Disaster Recovery

Hi!
My exchange server 2003 reside on the same server where my DC was installed. Later on, my AD database had been corrupted and no system state backups. The problem is i cannot log on the said server in normal mode but I can log on to it in DSRM mode. Is it
possible to remove/uninstalled the exchange under DSRM mode?
Please help.
Thanks
Greenlock

Exchange EDB Recovery is powerful tool to repair and restore inaccessible mailboxes of Exchange Server and repairs the database files of Exchange Server. It recovers EDB server mailboxes and imports them directly to Outlook and these files are used as PST
files.
Download:- http://www.pcrecoveryutility.com/exchange-server-recovery.html

Cannot log on to exchange server

Similar Messages

Maybe you are looking for