"Cannot login. Make sure the name and password are correct."
I've just created a new iAS6 SP4 instance on a new machine (new local LDAP, SPARC Solaris8). But when I startup a ksvradmin tool I get the msg: "Cannot login. Make sure the name and password are correct."... and I cannot access to admin my new instance :-(. I don't understand about what user and what pw it tell me. I did this instalaltion on other machine by the same way but without any problem. On my other machine I don't have to identificate me when I use the ksvradmin tool.
Sorry I wasn't being very clear either. I was assuming that you were trying to follow option 2 from Joe D's post on 3-24-2004. Once you know what environment variables have changed you can go the control panel to set them. Some of them will may be new variables that you will need to define. Others may already exists in which case you want to append to them.
The other option is as Joe D said, which is to run VCVARS32.bat before you start Xmath. You could even make a batch file such that instead of starting xmath.bat directly you call your own batch file (.bat). This batch file would have two lines. One to run VCVARS32.bat and the second to run XMATH.bat. If you are not familiar with batch files there are a lot of resources on the web about them. In this case all you would need is:
<path to vcvars32.bat>\vcvars32.bat
"C:\Program Files\National Instruments\MATRIXx\bin\xmath.bat" -v 71.6
The -v 71.6 is optional. it specifies to specifically open version 7.1.6. If you leave it off the newest version will be opened.
Carl L
National Instruments
Similar Messages
-
I have just installed v6.3 for Windows and am trying to run a hyperbuild simulation of a legacy (v6.2 UNIX) model. I suspect that I don't have everything configured right (path to C compiler???) I get the error message "can't find 'nmake'" during simulation.
Help!Sorry I wasn't being very clear either. I was assuming that you were trying to follow option 2 from Joe D's post on 3-24-2004. Once you know what environment variables have changed you can go the control panel to set them. Some of them will may be new variables that you will need to define. Others may already exists in which case you want to append to them.
The other option is as Joe D said, which is to run VCVARS32.bat before you start Xmath. You could even make a batch file such that instead of starting xmath.bat directly you call your own batch file (.bat). This batch file would have two lines. One to run VCVARS32.bat and the second to run XMATH.bat. If you are not familiar with batch files there are a lot of resources on the web about them. In this case all you would need is:
<path to vcvars32.bat>\vcvars32.bat
"C:\Program Files\National Instruments\MATRIXx\bin\xmath.bat" -v 71.6
The -v 71.6 is optional. it specifies to specifically open version 7.1.6. If you leave it off the newest version will be opened.
Carl L
National Instruments -
Initially, the Demon support desk asked me to reset all my browsing history which did nothing.
I tried Internet Explorer (7.0.5730.11) and this too failed initially but after several tries, I managed to log in and collect my mails.
I then logged out and tried Firefox, which failed (Incorrect log in name or password).
I immediately tried IE again and got in first time.
In Firefox (TOOLS, OPTIONS, SECURITY, EXCEPTIONS), I set web.mail.demon.net to permit the site any access that might have been denied.
The user name and password ARE correct (that would be too easy) but Firefox seems not to send one of these correctly ??? or is not sending something I.E. does.
aarghhhFrom the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support. -
I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvoHi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu -
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
Could not open gmail on the mail application of the mac book pro.
Gmail has two account types, SMTP and Google IMAP.
In both cases failure in trying to log on to SMTP and Google IMAP because I have to verify that the username and password are correct.
How do I verify that? Please help. Thanks.Routing gmail through Mail.app:
imap-http://mail.google.com/support/bin/answer.py?answer=81379&topic=12814
pop-http://mail.google.com/support/bin/answer.py?answer=13275&topic=12810
More up-to-date advice here:
http://www.macworld.com/article/2033842/make-mail-and-gmail-play-nice.html#tk.nl _mwhelp
Note that you lose privacy when using Gmail (and Yahoo):
Gmail and Yahoo both scan users' emails. They do algorithmic analysis of your email messages, targeting ads that relate to the content of your messages. -
Can't get face time to work. Know the username and password are right. Asks me to sign in...verifying... And then goes back to sign in...
One thing that worked for me:
launched Message app which uses the same backend as Facetime. If it launches, click on the video. May display a Error Dialog. Call AppleCare and give them the number displayed. This will give them the needed info to check your AppleID account for the messaging servers
For some reason FaceTime did not display this error, yet once I gave the Support person the number it was fixed in just a minute.
YMMV -
Having trouble adding a gmail account on my iPad. This would be a second email account. Keep receiving message that says username or password are incorrect but I know the are accurate. Any suggestions?
You might be better off deleting the account and starting all over again with the account. Here is a gmail help site that will take you through all of the set up steps.
http://support.google.com/mail/bin/answer.py?hl=en&answer=77702 -
C#: 'Not a Valid File Name' error when I know the name and link are correct.
I'm receiving "Not a valid file name" when I know I have used this link before and the filename is spelled correctly. I'm not sure if I should be looking at something else. This is my connection code. It fails on "conn.Open()".
For security reasons, I edited the link... it is not a working link for this question.
private void InitializeDBConnection()
strConn = @"Provider=Microsoft.ACE.OLEDB.12.0;Data Source=http://database.storage.net/App_Data/Tracking.mdb";
MessageBox.Show(strConn);
MyConn = new OleDbConnection(strConn);
MyConn.Open();
SVA database must be locally available via the filesystem, e.g. an UNC path would do it also.
-
Help!
Hello Mikeytsmith
Check out the article below for troubleshooting the issue of activating FaceTime for Mac.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Any help please why nothing happens when I tried to open the icloud control panel for the 1st time.
User name and password are correct.Any help please why nothing happens when I tried to open the icloud control panel for the 1st time.
User name and password are correct. -
Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?
Try this:
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute). -
"You may need to enter the name and password for an administrator"
I am suddenly getting this message when I try to copy a file from my new Macbookpro to my Powerbook running 10.4.9.
"You may need to enter the name and password for an administrator on this computer to change the item named "file i am trying to transfer". stop continue
I hit continue and get the error message: "The item "that I am transferring" contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?
I say continue and get the error: "The operation cannot be completed because you do not have sufficient priveleges for some of the items."
My network was working fine until today. I can copy fine to all other computers on my network. But not this one.
If I initiate a transfer from the Powerbook, everything works fine.
Ideas?I experience the exact issue between a macbook pro and an iMac.
I can access the files locally on my macbook, copy them on usb-stick, etc.
but ... when I try to copy the files to my iMac ... it fails with the sequence of questions you mentioned.
However!
I can copy whatever I like from my macbook if I use my wifes account.
So...
Imho there is a problem when the SAME account is used on both systems.
In my case, I copied my account from the macbook to the (new) iMac.
Mac OS X seems to be confused when the same accounts are used.
Does this makes sense?
All help welcome.
Luc -
Question
when i go into history to delete everything but when i go to type site it comes up and name and password are saved i want to delete all this but cannot editQuote from the article.
Time Machine in OS X Lion includes a new feature called "local snapshots" that keeps copies of files you create, modify or delete on your internal disk. Local snapshots compliment regular Time Machine backups (that are stored on your external disk or Time Capsule) giving you a "safety net" for times when you might be away from your external backup disk or Time Capsule and accidentally delete a file.
So what makes a notebook any different then a desktop, other then with a desktop you might have your tm backup drive connected all the time.
The object here is to not indiscriminately delete files you need or want to keep. I personally have never deleted a file I wanted to keep.
In essence a backup is for catastrophic failure of your system. So it can be restored once that failure has been fixed. Not because you go in willy nilly and start deleting files. -
LAN Networking / UUID error - "You may need to enter the name and password"
I'm having an issue with networking via ethernet cable. I'm connecting to Windows Vista via ethernet from my macbook pro.
Everything was going hunky dory until today when I connected and tried to copy a folder over from my desktop to a folder on my vista machine.
The error is a three tier one, as follows:
1. +"You may need to enter the name and password for an administrator on the computer to change the item name "..." - stop or continue"+
2. +"The item "..." contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?" - stop or continue+
3. +"The operation cannot be completed because you do not have sufficient privileges for some of the items."+
This happens with all files and folders that I try to transfer over. I have full permissions on both ends to do this and the folders have full permissions.
I've done a bit of trawling and have found out that if you goto: system prefs - accounts (click unlock) - right click on the user in question - advanced options, you can click on the "create new" button under UUID and create a new UUID digit, then restart. This works!!!!... But...
...it only works for a little while. After transferring a few folders or files accross, it comes up with the three tiered warning: "you may need to enter the name and... etc etc."
This is really annoying.
I've found my initial answers on this thread: http://discussions.apple.com/thread.jspa?threadID=1823835&tstart=45, but this issue seems to go one step further by constantly not allowing me access
Has anyone got any thoughts about what I can do? I've also tried running applejack on startup, but this doens't work either...Actually I get some other errors as well:
"You may need to enter the name and password..."
Then I click continue...
"The item "filename" contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?"
I click continue...
"The operation cannot be completed because you do not have sufficient privileges for some of the items."
I am copying a text file made from textedit. I have logged into the shared drive on my iMac. I get the same errors coying to my own user folder. Same account on both machines.
But it does copy a blank version of the file to the drive and adds the .txt extension to it. Then I can delete it from the share.
Maybe you are looking for
-
I need to back up my iphone 5s on my old PC running Windows Vista SP2. After installing the proper iTunes that would run on Vista, I get an error as follows; "Apple Application Support was not found. Apple Application Support is required to run iTune
-
Hello Everyone, I have a question, we developed a Basic Cube by building dimensions & Fact from the Source table(Everything in DSV, no Physical DIM and Fact Tables). Now everything goes well. The Source table will only have CUrrent day data. My Ques
-
Regarding nor of line items selected in per select query..
hi, i want to display nor of line items selected in per select query for two individual queries which are linkesd by for all entries.. regards.. chetan
-
SAP import the part of system copy.
Dear Experts, I am doing SAP import the part of system copy. Every phase is complete successfully but in u201C Create Database Schema u201C status bar i got information u201C remove schema user SAPSR3u201D. This step is running since 10 hours. Is t
-
Default unit of work for vehicles on PM work orders
Hi SAP experts, I would like to find out if it is possible to default the unit of work for vehicles on a PM order? We currently have two types of work centers, people (H) and vehicles (KM). The problem is that we can only default one unit (H) for the