Cannot login oim after restore db from other server using dataguard

Hi all,
i find a problem,
I installed OIM 11g R1 application and database both DC and DRC server, and all application and database is already running normally. i used dataguard for set up both database.so, i restore database DRC to DC, and database DC already restored and weblogic,oim server,soa already up. but when i try to login into oim application i cannot login because wrong password, and i go to forgot password i get the popup error "cant find resource for bundle java.util.PropertyResourceBundle". i think this problem about keystore, but when i copy keystore in server DRC to DR, this problem can't be solve.
any idea to solve this problem? or i set up dataguard using different way with oracle best practice?
env :
OIM 11.1.1.5 patch 7
wl 10.3.5
db 11.2.0

Hi San Xu,
Thanks for the reply.
I cannot remove add-on with this database, when I click button update there is same message "Continue working without this Add-on"
I already try to remove the add-on in Test Server with another database in same server (I can remove the add-on used another database) and then I try to clear up entries in registration file and then try to run SAP B1 as administrator to register and install again with the database which infected, with result cannot install with same message "Continue working without this Add-on", but I can install again the add-on with another database with no problem and the add-on run well in another database.
I'm very confused, why any add-on cannot installed in this database only and also cannot remove use this database but run well (can installed, can remove and also can used) in another database in same server.
I also already try such your suggestions to create a new test company in Test Server and try remove and installing the add-on with the new database, there is no problem with this new database (the add-on can remove, installed and then can run well in the new database). But still the add-on cannot run in the database which I backup from Production Server.
Best Regards,
Silvy

Similar Messages

How to download a file from other server using servlet

Hi All....
Good Morning....
right now,i am facing a problem..i am trying to download a file which is in other server..i tried somany ways and i couldnt succeed in this...
will u pls give me solution for this..
because it is very urgent for me...
i am very much thankful if u provide me the code samples also....
i am seeking ur help...
Regards,
sathya

right now,i am facing a problem..i am trying to download a file which is in other server..i tried somany ways and i couldnt succeed in this...If you can tell some of our approaches and the failures you faced, someone might be able to help you.
I dont think anyone will just give the code samples.

Issue in rebuilding index after restoring database from sql server 2005 to 2012

Hi All,
We have recently restored a database named DBA_admin from our sql server 2005 instance to sql server 2012 and we have added the database to out weekly maintenance plan. After adding the database to maintenance plan the job is failing every weekend due to
below error message.
Error message from maintenance plan history:
Executing the query "ALTER INDEX [PK_lsttype] ON [dbo].[lstAssign..." failed with the following error: "Invalid object name 'admin.dbo.databaselog'.
ALTER_INDEX - dbo.PK_lsttype". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Below is the code within the maintenance plan which the rebuild index task is using for database dba_admin:
USE [dba_admin]
GO
ALTER INDEX [PK_lstType] ON [dbo].[lstType] REBUILD PARTITION = ALL WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 98, DATA_COMPRESSION = PAGE)
Please let me know if any one knows how to fix this issue.
Thanks in Advance.

Sorry for the confusion.
Here is what is happening.
The query is failing while trying to rebuild index [Pk_lsttype] on table [lstAssign], both these objects belong to database
admin.
I have verified the old instance there is table databaselog within the database
dba_admin, but in new SQL instance within the database dba_admin the table is not present.
Even I'm not sure of what this table databaselog has to do with rebuilding indexes on table
lstAssign within the admin database.
I have manually tried to execute the alter index command within the database
admin and it is failing with the below error.
ALTER_TABLE - dbo.Query_pnb_sms
Msg 208, Level 16, State 1, Procedure ddlDatabaseTriggerLog, Line 39
Invalid object name 'dba_admin.dbo.databaselog'.

Error 150:30 after restoring CS4 from Time Machine backup

I just got myself a new Imac with OS X Maverick and set it up using a time-machine-backup. My Adobe CS4 now has a Problem with the license and shows me error: 150:30?
Do I need to uninstall CS4 and reinstall? Is there any easier solution to this problem?
Thank you anyone for some help.
chris

Thanks a lot for your help......everything back to normal after reeinstallation.
chris
Am 29.09.2014 um 23:28 schrieb John Waller <[email protected]>:
Error 150:30 after restoring CS4 from Time Machine backup
created by John Waller in Adobe Creative Cloud - View the full discussion
Do I need to uninstall CS4 and reinstall?
Unfortunately yes.
Also run the Cleaner Tool prior to reinstalling
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Restoring from Time Machine backups invariably breaks the activation mechanism (Error 150:30) and there's no easy way to fix a 150:30 error other than via re-installing.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6775090#6775090
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

After restore backup from time machine, all thumbnails in photos are blank. How to fix ?

After restore backup from time machine, all thumbnails in photos are blank. How to fix ?
I'm using Yosemite 10.10.3 and Photos. i have tried repair database, but no success .

Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT

Can't send and receive SMS/MMS/iMessages after restoring iPhone from a backup

I can't receive and send any type of messages with my iPhone 3GS (iOS 6.1.6) after restoring it from my old backup (also 6.1.6).
Messages that I'm sending are disappearing immediately after the moment they are sent and they are never delivered. The first time I restored my iPhone I could send and receive messages for 1 day, and I couldn't do it on the next day. This time I was able to send and receive messages for 10 minutes.
I have used the methods Apple recommends for problems like this, but it doesn't help.

Hello StepanyanMuradyan,
Thanks for using Apple Support Communities.
To troubleshoot issues with not being able to send or receive messages on your iPhone, I'd like you to please follow the troubleshooting outlined below.
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
iOS: Troubleshooting Messages - Apple Support
Take care,
Alex H.

Exchange 2010 - Clustering & DAG problems after restoring CLUSTER from domain

Hi there!
SITE 1
Primary EXCHANGE server (2010SP3 with latest CU) with all the roles installed
SITE 2
Secondary Exchange server (2010SP3 with latest CU) with only mailbox role for DAG purpouse.
SITE 1 and SITE 2 are connected with site-to-site-vpn.
Both servers are on 2008 r2 ENT.
About 3-4 months ago we have accidentely delete DAG node from domain. We have managed to restore it from domain with using AD RESTORE and checking that DAG is member of all the required Exchange groups in the domain.
Now we are having some big problems if site-to-site-vpn dropps, our primary Exchange server in SITE1 is not working.
If VPN dropps between the sites, OWA gets unavailable as it Exchange servers would think that Exchange in SITE2 is primary server.
Please advice us how to track and repair the root of the problem.
With best regards,
bostjanc

Running command:
Get-MailboxDatabaseCopyStatus –Server "exchangesrvname" | FL MailboxServer,*database*,Status,ContentIndexState
Gives as an output that all the databases are healthy:
Example of 1 database report:
MailboxServer      : ExchangeSRVname
DatabaseName       : DatabaseName1
ActiveDatabaseCopy : exchange2010
Status             : Mounted
ContentIndexState : Healthy
Running command:
Test-ReplicationHealth –Server "exchange2010.halcom.local" | FL
Also gives output that everything is fine.
We still need to solve this issue so we will be unmarking the thread being ansered.
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : ClusterService
CheckDescription : Checks if the cluster service is healthy.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : ReplayService
CheckDescription : Checks if the Microsoft Exchange Replication service is running.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : ActiveManager
CheckDescription : Checks that Active Manager is running and has a valid role.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : TasksRpcListener
CheckDescription : Checks that the Tasks RPC Listener is running and is responding to remote requests.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : TcpListener
CheckDescription : Checks that the TCP Listener is running and is responding to requests.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : ServerLocatorService
CheckDescription : Checks that the Server Locator Service is running and is responding to requests.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : DagMembersUp
CheckDescription : Verifies that the members of a database availability group are up and running.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : ClusterNetwork
CheckDescription : Checks that the networks are healthy.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : QuorumGroup
CheckDescription : Checks that the quorum and witness for the database availability group is healthy.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
RunspaceId       : c8c20c41-7b3e-463c-9c98-56785d62c74b
Server           : ExchangeSRVname
Check            : FileShareQuorum
CheckDescription : Verifies that the path used for the file share witness can be reached.
Result           : Passed
Error            :
Identity         :
IsValid          : True
ObjectState      : New
bostjanc

I cannot send or receive text messages from other iPhone users. I don't get an error I just don't receive any messages and the other users do not receive mine.

I cannot send or receive text messages from other iPhone users. I don't get an error I just don't receive any messages and the other users do not receive mine.

Reset the devices: Hold down the home button along with the sleep/wake button until you see the apple, then let go.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

Install. of obi11g on one server using weblogic from other server

Hi All,
I have installed Web logic on one server and i have to install OBIEE11g on other server using the same weblogic server.
Is it feasible and if yes please let me know how?
I have to install OBIEE11g on Linux 64 bit.
Web logic is installed on windows machine
Thanks a lot in advance...

Hi,
This should be possible. You must do software only install to avoid weblogic being installed again on your linux machine. After doing the installation you should point obiee to use the weblogic installed on your windows server.
Thanks,
-Amith.

All the SSIS Packages are not editable to the all users after deploying to the other server

Hi All,
I am using sqlserver2012.
How to make all the SSIS Packages are not editable to all users after deploying to the other server. is there any way to achieve this,
if yes, could share the information how to do....
Thanks in advance....
RamarajuC

Typically, you change the protection level as listed in the following steps:
During development, leave the protection level of packages set to the default value,
EncryptSensitiveWithUserKey. This setting helps ensure that only the developer sees sensitive values in the package. Or, you can consider using
EncryptAllWithUserKey, or DontSaveSensitive.
When it is time to deploy the packages, you have to change the protection level to one that does not depend on the developer's user key. Therefore you typically have to select
EncryptSensitiveWithPassword, or EncryptAllWithPassword. Encrypt the packages by assigning a temporary strong password that is also known to the operations team in the production environment.
After the packages have been deployed to the production environment, the operations team can re-encrypt the deployed packages by assigning a strong password that is known only to them. Or, they can encrypt the deployed packages by selecting
EncryptSensitiveWithUserKey or EncryptAllWithUserKey, and using the local credentials of the account that will run the packages.
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

Get the connected users count from sql server using powershell

Hi,
I am working on SharePoint 2013,I am having SQL server 2012.
I want to get the Connected Users count from sql server using power shell.
Can any one please let me know how to implement.
Thanks in advance.
Regards,
Phani Kumar R

Sorry Tom, I dont like to hear "There is no way" :-(
There is always a way in computer to get what you need (at least it is good as Rule of thumb). I am not sure we will find it here (in a voluntary supporting forum).
Now we (or better the architect of their system) should think of the way :-)
Of course doing so in the forum, while we do know the system and only got a glimpse on what is needed, is not the best idea. I will point some issues which can be related to a solution. Those are not a solotions as it is but something we can use for a solution
once something look in the right way.
* A web connects counter is one of the easier thing to do. The basic idea is just to use the connect event and the disconnect event an adding 1 or removing 1 from the counter. This is best to do in the application using static variable as any way the second
the application is down the counter can be go to hell as we know there is no one connect (there for a counter do not use database usually). Using a web dot-net (or asp 3) application this is done most of the time using the global.asa/global.asax file, which
include the application and session events. for example using the method Session_Start
protected void Session_Start(object sender, EventArgs e) {
// Code that runs when a new session is started
* IIS have a build-in loging system where we can log each and every request/response or only logins users. There is lot we can do with this log files including data mining. Using small bulk insert script we can use the SQL agent to insert those logs to the
database and get the information we need.
* any web developer i want to believe know about the Fiddler application which we use to monitor traffic. A proxy is not the only way to to monitor traffic (it is not good for our case as this is in the client side), there are several option in the server
side.
* SQL trigger on logon can be use to get information on who is loging on and can be logging only specific source (like our sharepoint IP or any sharepoint application). This information (what is the application which connect to the server can be retrive
in several solution without using a trigger as well)
*** (I'll be brief ... I'm getting bored... probably the reader feel the same)
* using extended events and/or profiler we can monitor any connection and save the data or just remember it in shared (static) variable (this
blog show how to do it by the way). Again we can monitor specific application or use any filter in order to get only the sharepoint users
.... and i can continue for several days more :-) ...
"If there is a willing, then there's a way"
"If you can't do it, Then someone else probably can"
"Never say never"
I hope this help somehow :-)
[Personal Site] [Blog] [Facebook]

Is it possible to lock the keyboard of a client from a server using java

please explain wheterit is possible to lock the keyboard of a client from a server using java

You want to process code on one machine, and thereby lock the keyboard on another machine? No, that's not possible. It is extremely far from possible.
Of course, if the client is running software with security holes in it you might hack into it and crash the thing. This will lock up the keyboard pretty good. I hope that's not what you want ...
Or are you talking about a setup where you already have code running on the client, and some sort of communication between client and server? In that case what you need to know is whether it is possible to lock the keyboard at all. Once you have figured that out, it is trivial to add the communication code to have the server software tell the client software to lock the keyboard.
So what do you mean with "lock the keyboard"? It's pretty easy to remove/disable all keyboard related listeners in your own application. It's a lot harder (and AFAIK impossible with pure java) to disable alt-tabbing out of the application. And impossible, except from exploiting security holes, to lock the ctrl-alt-delete-combination on windows machine.

Access, execute mof from pull server using release management

I have created a DSC pull server and deployed a mof to this server.
I could access the mof from pull server using below script and it executed successfully from powershell ISE.
    1.
Configuration
C_Pull_Webserver
    2.
    3.
LocalConfigurationManager
    4.
    5.
AllowModuleOverwrite=$true;
    6.
ConfigurationID
= "db00cf80-cb0e-4537-8344-90e3906e0b34";
    7.
RefreshMode
= "Pull";
    8.
DownloadManagerName
= "WebDownloadManager";
    9.
RefreshFrequencyMins
= 15;
    10.
ConfigurationModeFrequencyMins
= 30;
    11.
ConfigurationMode
= "ApplyAndAutoCorrect";
    12.
DownloadManagerCustomData
= @{
    13.
ServerUrl
= "http://myserver:8080/PSDSCPullServer/PSDSCPullServer.svc";
    14.
AllowUnsecureConnection
= "TRUE" }
    15.
    16.
    17.
#Create MOF to push
    18.
C_Pull_Webserver
    19.
#push the MOF: this will engage pull mode
    20.
$FilePath
= (Get-Location
-PSProvider FileSystem).Path
+ "\C_Pull_Webserver"
    21.
Set-DscLocalConfigurationManager
-ComputerName "CHN-AERO-VM13"
-Path $FilePath
-Verbose
I removed the below lines from the above script
19.
#push the MOF: this will engage pull mode
20.
$FilePath
= (Get-Location
-PSProvider FileSystem).Path
+ "\C_Pull_Webserver"
21.
Set-DscLocalConfigurationManager
-ComputerName "CHN-AERO-VM13"
-Path $FilePath
-Verbose
andand tried to access it from release management and i get the below error
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.AggregateException: One or more errors occurred. ---> Microsoft.TeamFoundation.Release.Common.Helpers.OperationFailedException:
Perform operation 'Invoke CimMethod' with following parameters, ''methodName' = SendConfigurationApply,'className' = MSFT_DSCLocalConfigurationManager,'namespaceName' = root/Microsoft/Windows/DesiredStateConfiguration'.
Failed to apply configuration in the DSC script to the computer. Consult the Logs below for details of the error.
System.Management.Automation.RemoteException: Unable to find the mof file. Make sure you are generating the MOF in the DSC script in the current directory.
   at System.Management.Automation.PowerShell.CoreInvokeRemoteHelper[TInput,TOutput](PSDataCollection`1 input, PSDataCollection`1 output, PSInvocationSettings settings)
   at System.Management.Automation.PowerShell.CoreInvoke[TInput,TOutput](PSDataCollection`1 input, PSDataCollection`1 output, PSInvocationSettings settings)

Don't know. How did you generate the MOF?
When I run this it works just fine:
Configuration C_Pull_Webserver{
LocalConfigurationManager{
AllowModuleOverwrite=$true;
ConfigurationID = "db00cf80-cb0e-4537-8344-90e3906e0b34";
RefreshMode = "Pull";
DownloadManagerName = "WebDownloadManager";
RefreshFrequencyMins = 15;
ConfigurationModeFrequencyMins = 30;
ConfigurationMode = "ApplyAndAutoCorrect";
DownloadManagerCustomData = @{
ServerUrl = "http://myserver:8080/PSDSCPullServer/PSDSCPullServer.svc";
AllowUnsecureConnection = "TRUE"
C_Pull_Webserver
¯\_(ツ)_/¯

Cannot find wifi after restoring

After restoring my ipad, it cannot scan for wireless networks. What should I try?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Cannot login oim after restore db from other server using dataguard

Similar Messages

Maybe you are looking for