Cannot login to the Mosrosoft Outlook profile Outl...

When I tried to syncronise to my Outlook calendar, I got an error: "Cannot login to the Mosrosoft Outlook profile Outlook. Then sync again"
Outlook 2007
Nokia Ovisuite 2.2.1.23
Windows 7 32bit
I ran the Office Diagnostics tool in Outlook (Help> Office Diagnostics) and it solved my problem
If you have the same problem you can try it
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Wanted to add a Brief Update to my situation. I am able to access the OWA from another computer in the test environment. However, I cannot get outlook 2010 to connect to the server. I can Do the OWA but all messages sent are immediately placed in the drafts
folder and stay there.
Alof to learn from someone who knows 2003 and hasnt learned anything new. :-)

Similar Messages

NWDS Webdynpro deploy: Cannot login to the SAP J2EE Engine using ......

Friends,
I am getting the following error while deploying a web dynpro application through NWDS.
Aborted: development component 'WebDynpro_ErrorBehavior'/'local'/'LOKAL'/'0.2007.05.29.17.02.04'/'1':Cannot login to the SAP J2EE Engine using user and password as provided in the Filesystem Secure Store. Enter valid login information in the Filesystem Secure Store using the SAP J2EE Engine Config Tool. For more information, see SAP note 701654.com.sap.sdm.serverext.servertype.inqmy.extern.DeployManagerAuthExceptionWrapper: Wrong security credentials detected while trying to obtain connection to the J2EE Engine. (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMAUTHEXC)
I get this error after I supply the SDM password which NWDS asks before deploying.
Can someone guide?
[email protected]
Thanks

In the additonal error log it says-
Unable to compare host[px1db] and host[x900704] Throwable: java.net.UnknownHostException Throwable message: x900704: x900704
where px1db is my portal server and x900704 is my localmachine name.
I dont know why it says so ...In NWDS i have configured only px1db.
any thoughts.
Vinay

GETTING ERROR MESSAGE"You cannot login because the phone is JAL-enabled' while logging into CAD

Hello All,
One of my customer is facing problem while loging into CAD. They were getting an error message"
You cannot login because the phone is JAL-enabled.
JAL-enabled phones are not compatible with CAD".
I gone through some cisco document saying that Join across line/Direct transfer across policy option status should be set to OFF. But i dont find option in 9971 series phone.
Any Reply for this query. Highly Appreciated.

That's because the JAL function is inherent to the 8961/9951/9971 phone and cannot be disabled. You'll need to upgrade to a release that supports this phone model or use a different phone.
Please remember to rate helpful responses and identify helpful or correct answers.

I have updated to Fire Fox 4. My windstream provider has recently updated to a new view, which I prefer. I cannot login to the new view since the update. I get a message that says the browser I am using is only supported by the classic view.

Thank you

Thank you for you input so far.....
I think we are getting nearer to the solution sort of!
Let me get this straight...... I have paid for content on itunes, bought the apple devicds in order to play said content, now I have to subscribe $25 for the privilage of playing MY library content on MY other devices. Which wasn't such an issue to do before the new and improved itunes version!!
Have I got that correct. I think I cannot associate my other iOS devices with my library because I am unwilling to pay further through the nose!!!??? or am I missing something?
Thanks
Frustrated even more now!!

My 5-minute-old AppleId account was disabled immediately for security reasons. I have followed instructions carefully and although I seem to be able to change my password, I cannot login using the new password bcs account disabled for security reasons!

It is probably something to do with the fact that I am in the Philippines, but what am I supposed to do? According to the support options I have to pay to open a support ticket. My account was not verified when it was disabled and I think I might be in some sort of deadlock in which the password reset won't work because I'm not verified, and the verification won't work because I can't log in.
I've never bought a single Apple product before and this has got to be the worst intro I could have imagined!

Solved.
After about an hour on the phone with US support (who were very helpful I must say) it turns out that if you do not have an iTunes account with credit card information and a billing address, you are very much more likely to get your AppleId account disabled "for security reasons". This begs the question of course as to whose security we are talking about here! But there you go. If you are an Apple first-timer, get an iTunes account, fill in all your details, and you should be alright.
Thanks for everyone's suggestions.

2 iPhone Household w/ Outlook Profile Sync Issues with iTunes beyond 7.3.1

I’m huge Apple supporter and have to say this is the most frustrating computer issue I have ever come across. My wife and I both have iPhones and we sync them to the same pc except different Outlook profiles. iTunes 7.3.1 works fine when we sync our iPhones on each of out Outlook profiles, anything beyond 7.3.1 will automatically sync my contacts and calendar directly to her phone. It’s as if iTunes cannot distinguish between the two outlook profiles on the newer iTunes versions. I have tried both Outlook 2003 and 2007 with newer iTunes, and it's still not able to distinguish the two profiles.
Any would be greatly appreciated.

i have a similar problem, having one good and one bad outlook profile. Used to sync just fine against the good one (which is called 'new profile). new version is defaulting against the bad one, which has none of my contacts...
where does one setup which named profile is to be used?
thank you! any help appreciated!

Cannot create new folders in Outlook

I just bought a new PC computer. I installed MSFT Office Professional Plus 2010. I opened Outlook and added in (i) the pst folder I had set up from my previous Vista
computer (also with Outlook 2010), (ii) my hotmail account, (iii) my at&t/yahoo account and (iv) my gmail account. I cannot create new folders in any of them.
When I right click anywhere in the navigation pane and select "New Folder..." I get the following error message:
"Outlook cannot read the registry information.
-Close and restart Outlook.
-Reinstall Outlook
-Reinstall Microsoft Exchange or other e-mail system."
I tried all three, including removing and reinstalling Office and removing all of the email accounts/pst files and re-adding and still have the problem.
If I try to right-click properties on any of the accounts, I get the same error message, with the following additional language first:
"Cannot display 'General' page. This page will remain visible, but is not available."
Not sure what is left to try.
Appreciate any ideas.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, If the PC from clean install, you can follow these steps to test this issue.
1.
Start the Outlook in safe mode,
Press and hold the CTRL key,
and then click Outlook.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Office program, we can try to disable them.
2.
Create a New profile & PST file to test this issue
If this problem does not occur in the new Outlook profile & PST, the old Outlook profile is corrupted. We can delete that and use a new Outlook profile.
3.
Make sure the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
key permissions to allow full permissions to all users
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might
occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how
to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756  How
to back up and restore the registry in Windows
a)
Exit Outlook if it is running.
b)
Click
Start, and then click Run. Copy and paste (or type) the following command in the
Open box, and then press ENTER: regedit
c)
Locate and select the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office
d)
On the
Edit menu, click Permissions.
e)
Click the registry key for the user who is currently logged on, and ensure that
Read and Full Control permissions are both set to
Allow.
f)
Click the Advanced button, ensure that the user who is currently logged on is selected, that
Full Control is listed in the Permissions
column, and that This Key and Subkeys is listed in the
Apply to column.
g)
Click to select the Replace permission entries on all child objects with entries shown here that apply to child objects check box, and clear
the check box
Windows 7: Include inheritable permissions from this
object’s parent
Windows XP: Inherit from parent the permission entries that apply to child objects. Include these with entries explicitly defined here.
h)
When you are prompted to continue, click Remove.
i)
Click Apply, and then click Yes when you are prompted to continue.
j)
Click OK, and then click OK again.
k)
On the Registry menu, click Exit.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

Cannot login to network account (leopard client and server)

Up until now, I have used local accounts on my leopard server. I want to start experimenting with OD prior to implementing. I created a new user account in the /LDAPv3/127.0.0.1 domain, and have bound my leopard client to the server using directory utility. On the login screen, "Network Accounts Available" has a green button to the left of it. When I try and login to the server account, the login window just shakes. At first, I could enter the password and then it would prompt me for a new password. Trying to enter a new password would not allow me to login. I went back to server admin and disabled the "require new password" setting, (as well as the other good security policies)...
I have also reset the password in WGM, and made sure to disable all the security stuff there too...
Lastly, I have deleted the server in directory utility, rebooted, then added it back in, and rebooted again...
I still cannot login to the server account, the login screen just shakes
Does anyone have an idea of what settings and or logs I can check to try and narrow down what is going on?
Thanks in advance....

to close out the thread, I have working dns on my network, but I did not have dns enabled on my server. I enabled the dns service and entered just the info for my server, then assigned my server and client to use the server's ip addy as the primary dns server. Next, I created the home directory.
Once both steps were done, I was able to log in from my client to my server based account...
FYI-I found a document on afp548.com called "leopard server: advanced setup, rsync backup and automated reporting" that walks you right thru the process...Here is the link, it's a very useful doc....
http://www.afp548.com/filemgmt_data/files/Leopard%20Server%20Quickstart%20Guide. pdf
thanks again boomboom_uk and woVi, your suggestions were spot on....

Cannot login via ssh/sftp from certain clients

Hi Guys,
Strange issue here. I have a machine running 10.7.4 that I want to be able to access via sftp/ssh.
I can login into the machine in terminal using either ssh or sftp.
I cannot however login to the machine from finder via sftp. I am just told the username/password is wrong.
Equally I cannot login to the machine from certain clients on my android phone (the main reason I need sftp)
I can however login from cyberduck on the other machines I have, and from some clients on my android phone.
When a mac is denied access it gives authentication failed as the reason, when a android client is denied access it gives network communtaction issues as its reason for failing, not authentication.
From memory these issues started when smb broke for me in 10.7.3.
Can any one shed any light on this?
Cheers

bump

How can I login to the Mac App Store?

My wife cannot login to the Mac App Store on her MacBook Pro. This first happened under Snow Leopard and is now happening under Lion. I have googled extensively for a solution, but not yet found one that lasts long term. We have binned a Networkinterfaces.plist a few times and this has given us temporary access to the App Store, but now it's lost it again and we can't even find the plist to bin it!
The error message we get when trying to login to the Mac App Store is, "your device or computer could not be verified".
Any help will be much appreciated.

Thanks for that suggestion. I'll remember it for next time. We seem to have got temporary reprieve, which we think might be due to resolving a conflict between iCal and MobileMe.

Password Manager & Outlook Profiles

I have two seperate Outlook profiles with different names in two seperate PST files with different passwords
I want to use the ThinkVantage Password Manager to provide the correct password for each of the two Outlook profiles
At the moment, I can only save one password in TPM for Outlook
Let's say I store the password for profile 1 in TPM. If I want to use profile 1, then everything works well
If I want to use profile 2, after selecting profile 2 in Outlook then TPM will only fill in the saved password for profile 1 which is the wrong password for profile 2
I do not have this problem with web sites such as HotMail etc.
TPM gives me a list of e-mail accounts to choose, I pick the one I want and it always has the correct password
This happens with a variety of systems
Outlook 2003 or 2007
Xp or Vista
TPM current and previous releases
How have you managed to resolve this?
Any suggestions gratefully received :-) thank you
Nigel

Does anyone have any ideas, suggestions, rumours or experience for this please?
Best wishes
Nigel

Hardware Failure - Cannot login to Folio Builder

I was having problems with DPS App Builder - that problem was mysteriously solved.
Yesterday I had a catastrophic hardware failure when my MacBook Pro's screen died. I had to move my harddrive to a new MacBook Pro.
After moving my harddrive, I could no longer login to the Folio Builder Panel in Indesign CS6 (CC subscription). I decided to
deactivate, uninstall InDesign and reinstall, removing preferences, and ensuring that all updates had been applied. I have
done that I am still getting the message:
Sign In has failed. Network failure. Then after I hit OK, I get: Sign Out has failed. Network failure.
I can login to the Digital Publishing Suite Dashboard and the Digital Publishing Folio Producer, but I cannot
login to the Folio Buidler Panel. DPS App Builder continues to work without a problem.
It seems as if these tools are TOO TOUCHY which leads to a lot of wasted time.
What's going on?

Try This:
Quit InDesign and any other CS apps.
Use the Activity Monitor to quit the CS5ServiceManager or CS5.5Service Manager.
Next delete this file based on version: (Back up the file just in case.)
Note:
For example:
/Users/"your user name"/Library/Application Support/Adobe/CS5ServiceManager/preference/csxs2.pref
/Users/"your user name"/Library/Application Support/Adobe/CS5.5ServiceManager/preference/csxs2.pref
Then remove this item from the Keychain Access based on version: Adobe CS5 renga or Adobe CS5.5 renga.
To remove from the keychain, navigate to: /Applications/Utilities and launch the Keychain Access.app
If the lock icon in the upper left appears locked, click it and enter your password to unlock it.
Select the “login” item in the Keychains list in the upper left.
Select “Passwords” from the category list.
Type “renga” in the search field in the upper right.
Lastly, select any matches and press the Delete key.

Folio Builder - cannot login after changing password

Hi all,
I changed my password at acrobat.com, now I cannot login with the new password from the Folio Builder panel in InDesign CS5.5. I'm on Mac OSX 10.6.8. Basically, the panel shows "Signing in..." and the endlessly spinning wheel, which means it's hanging and doesn't let me re-enter my login credentials.
I have tried uninstalling and reinstalling the Folio Builder and Overlay Creator tools, and am running the latest versions of each.I've also tried trashing the INDD preferences. No luck. I'd like to avoid uninstalling/reinstalling InDesign CS5.5, but if that's the only solution, I'll do it.
I did create a new user on my machine and that worked — I was able to login successfully with my new login credentials. But moving my production files and recreating all my settings from my account to this new one would take a while, so I wanted to see if there was another solution.
Thanks in advance for any help!
Jason

Hi John,
Yes, I can login successfully there. The problem also appears to be with the CS Review and Access CS Live panels in InDesign.
When I initially open the Folio Builder, I get the error dialog "Sign In had failed. [svr.InvalidLogin]". The CS Review and Access CS Live panels also report an internal error.
This happens in both InDesign CS5 and CS5.5 (both installed on the same computer). Could the CS5.5 and CS5 panels be sharing that info? I haven't uninstalled/reinstalled the panels from CS5, just from CS5.5, which might explain the error, if I need to also uninstall the CS5 panels/extensions.
Thanks,
Jason

I have a BRAND NEW I Mac and cannot login

I have a BRAND NEW I Mac and cannot login as the user....

Sounds like you forgot your username/password of somebody changed it.
You can follow the steps in http://support.apple.com/kb/HT1274 to fix it.

My sql+ windows shuts down autmatically and cannot login why?

Hi there,
the SQL+ window automatically closes. After reopening it, i cannot login, gives the follwoing error:
ORA-12541: TNS:NO LISTENER
why this happense? How i fix this?

here what says on the command window:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC0)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 8.1.7.0.0 - Production
Start Date 21-MAY-2008 03:55:34
Uptime 0 days 2 hr. 14 min. 1 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File E:\oracle\ora81\network\admin\listener.ora
Listener Log File E:\oracle\ora81\network\log\listener.log
Services Summary...
Ora8i has 1 service handler(s)
PLSExtProc has 1 service handler(s)
The command completed successfully
i also ran the start command. But still gives the same problem!.
I cannot remember what i did to close the SQL window but i'm sure it happened
when i used ALT+TAB to switch between windows.
Anyway i can login if i reboot my PC. But i can't reboot every time this happense.
SO please help me to solve the problem?
Thanks!

Cannot login to the Mosrosoft Outlook profile Outl...

Similar Messages

Maybe you are looking for