Cannot login to Windows 8 Domain PC with AD account

I have a Dell Inspiron 15Z which is joined to the domain. The laptop is running Windows 8. I am unable to login to the computer with any domain account (even accounts that have profiles saved on this device). I can ping the DC and I am able to login to the
DC with one of the accounts via RDP, so I know the account is not locked out. Just to be safe I reset the password for the account and still it gives me the "Incorrect password or username. Try again" error.
A little background:
I recently did a Windows Refresh on the computer due to some software issues. After Windows Refresh was completed I was able to login fine. But after a while it started throwing me the above error. I reset the password and was able to login under both accounts.
Now neither accounts work. My domain has two domain controllers, one is currently offline due to hardware issues.
I have used to lockoutstatus.exe tool to verify that the account is not locked out. I also verified that each unsuccessful attempt to login to the domain PC does not register on the Bad Pwd Count tab. I then entered in a bunch of garble for the domain account
and it did register bad login attempts so I know the domain is functioning correctly. I forced a gpupdate and I also forced a replication on the dc, still nothing.
Any help would be greatly appreciated. I am able to login to the computer using local accounts and Microsoft accounts, but no domain accounts.

Since you did a refresh, then run Windows Update and install all updates. Try disconnect from domain and rejoin and check if problem persist or not.

Similar Messages

  • Why my desktop adobe creative cloud cannot login but window adobe creative cloud can login :(

    why my desktop adobe creative cloud cannot login but window adobe creative cloud can login anyone can help me ?

    Please read, and reply back here with information https://forums.adobe.com/thread/1499014
    -and try some steps such as changing browsers and turning off your firewall for downloads
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Cannot login my Windows 8.1 Pro with my live ID, don't have the Microsoft Logon Option

    My laptop was installed with a Windows 8.1 Pro, and it worked very well before, i can login with my domain account and Windows Live ID, but today when i startup my laptop and i cannot find the option "Login with Microsoft/Live ID", i only can login
    with "Domain account/Local Account/SmartCard".
    Microsoft Account/Live ID is a local administrator but my domain account seems is not a local administrator.
    Now even i can login with my domain account, but i cannot change anything, because i'm not a administator, so how to make the "Microsoft Account" login available when i login the windows? (by the way, i cannot add a new login in the "Change
    PC Settings->Accounts", because my domain account is not a local administrator)
    thanks.
    William
    William

    Hi William,
    According to your description,I would like to know if you can see "Other User" option on the login screen.
    If you can see it,please click it and type your microsoft account.
    If you cannot see this option,please click Switch user to check the result.
    If the issue still persists, please upload the screenshot.
    Regards,
    Regards,
    Kelvin hsu
    TechNet Community Support

  • Login to WebApi (MVC + WebApi) with Microsoft Account from Windows Store App

    Hi
    How can I access a WebApi Controller (ASP.NET MVC+WebApi) that is secured with Microsoft Account from a Windows Store App?
    I have no idea how to login. I tried the LiveSDK but this gives me only access to OneDrive, Callender and so on.
    Could someone please point me in the right direction.
    Thanks
    Guenter

    Hi Guenter,
    To be clear, you are using Microsoft account as login and at same time you have your own REST service for other functionalities?
    Let's say if you login with LiveSDk, you should be able to get some access token, see this for more information:
    Signing users in, after that use the token to access your REST service, as I understand REST service is a kind of http request, we can use HTTPClient to request data from the address.
    I'm afraid there is no existing sample here but the only thing I found is HTTPClient sample:
    https://code.msdn.microsoft.com/windowsapps/HttpClient-sample-55700664, you can use POST to send your token information to the server.
    --James
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Cannot send emails to .gmail address with bluewin account

    My mum has an IMac (Snow Leopard) with a bluewin account and cannot send emails to a friend with a .gmail account. She gets an error message 17099, I think. Thanks for your help.

    The destination of a mail message has nothing to do with locally reported errors attempting to send.  If you could send, and the destination was wrong, generally all that would happen is you would get a "bounce" message that the receiver couldn't be found, and that wouldn't be instantaneous.
    Real errors like you describe that occur while sending means that either there's something wrong with your SMTP configuration (settings needed to send to the SMTP server) you set up in your mail client, or the SMTP server itself has a problem.
    Does this error occur with every mail you attempt to send to anyone or just that specific account?  Can you send a mail to yourself?   And also, which email client are you using?

  • Using different Office 365 Account on Windows 8.1 with Microsoft Account

    Onedrive does not have any connection to Office 365. They are completely independent of one another.
    Office 365 has no use of Microsoft Accounts (other than when sharing with people who are not in your tenant)

    I have a customer that has boughta new team member a laptop with Windows 8.1 on it.The customer uses a shared One Drive Account across all of the teams machines to share data between them.All the other machines are using windows 7 professional with the One Drive desktop app installed, allowing them to do that. On the windows 8.1 laptop though, they are forced to sign into the laptop with a the Microsoft account to access OneDrive on that machine, due to it being integrated with the OS. This however, has caused issues because the team member then has access to everything under that Microsoft account and not just access to the one drive which is all the other team members have access to. I haven't found a way around that but if you happen to know one, please let me know.Anyway, now the customer wants to add office 365 to the laptop using...
    This topic first appeared in the Spiceworks Community

  • Cannot login from Windows iCloud control panel, but that not all...

    I set up my Apple Id and downloaded the Windows iCloud control panel, but when I try to sign in from my PCI get this message: "You can't sign in because of a server error." But when I check the status of icloud everything is operational. But if I go to the icloud page directly, I can sign in normally. The reason this is an issue is that I cannot setup icloud on my computer properly and with all of the options I want without signing in from the icloud control panel. This really bites, and any help would be appreciated immensly.
    Thanks, Scott

    I am having the same problem. I really need a solution. My Admin is flying blind without being able to see my calendars.

  • Using Windows Domain credentials with Remote Panel

    I am looking for a way to deny remote panel access based on Domain login credentials. Is this possible natively to LabVIEW, or is it going to require calls to the Windows .NET libraries?  (which I dislike doing)

    Adding a solution in case anyone comes wandering by later looking.
    As far as I can tell it does require a call to the API, but a fairly simple call.

  • 802.1x and Windows Domain Controller with ACS

    Wow, I am having a tough time getting my ACS and the Domain controller to work with 802.1x PEAP. Can somebody explane to me how to set up the domain controller (Active directry) to get a PEAP cert? Some other questions. If I am using PEAP and 802.1x how does my computer get a cert. from the CA if the port is disabled by 802.1x? And How do I set up my domain controller to work with ACS to authenticate users. I have been beating my self to death to figure this out. Any help would be ausome. I am really stuck on trying to make this work.
    Thanks a ton in advance
    Justin

    I as a Cisco customer would like to see answers to our questions based on some real world experience or something you've noticed in a lab environment.
    By simply posting links is not very helpful. The reason most of us come to this site and post our questions, is because we already went to the Cisco website and found the explanation to be vague. In the future, please post answers to our question, intead of referring us to a link.
    Thank you,
    John...

  • WRT54GS cannot connect to windows media center with xbox360/can stream media from PC to x-box

    - running win XP MCE and set up xb 360 on  wireless router WRT54GS  updated from V1 to V 4.71.4 .  PC  wired to  router and  DSL signal  goes by wire from wall to modem, router, PC.  I can   stream media through xbox but not make the WMC connection.  I still get the"xbox360 not found on network".  I have gone through x-box set up page and installed the setup files.  I excluded  windows firewall as a problem.     I can connect to Xbox live and  xbox live/media tests on the xbox run w/o any failures.

    Thanks for your reply   Yes, I can connect to Xbox live from x box w/o diff.  It seems that the xbox can "see" the PC but the PC cannot "see" the xbox.  My PC is XP not Vista.

  • Unable to log onto domain controller with user account

    Hi,
    I am able to log onto my DC as domain admin. I cannot log on as myself. I do not see what I am missing in the GPO to make this happen? I am part of a server admin group and would like the server admin group to be able to log on to the domain controller to
    maintain the server. 
    Any suggestions?
    Wave~Chaser

    Log on to this DC and run rsop.msc and check the following policies:
    Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow log on locally
    Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Deny log on locally
    Add your self to Allow log on locally
    (in default domain controller policy - as I mentioned above) and make sure your user account not belong to any group that have Deny log on locally.
    Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

  • Cannot add friends in Game Center with child account

    I have two child accounts with their own iPads and unable to add friends in Game Center other than the family group owner.  All restrictions have been turned off in settings and Game Center profiles are setup as public and allow invites.  I would like to friend my two child accounts together so that they can play together.  Is there some restriction for child accounts in Game Center?

    Nevermind...after some more searching I found this, it worked!
    http://www.mac-forums.com/forums/os-x-operating-system/280166-mountain-lion-game -center-problem.html
    Scroll down until you see the instructions for the Terminal commands, and remember that you need to hit the control key to make the commands work, NOT the command key!

  • I have moved to Australia from the UK, but cannot buy from the Australian iTunes with my account. Please help.

    I have a PC (bought in the UK) and an iPad (bought in Australia), but only buy songs from my PC.
    It keeps directing me back to the UK store whenever I try to buy something - it is getting so frustrating! Any ideas or ways to fix this much appreciated.
    Surely I don't need to create a whole new account?
    Thanks. :-)

    Change your account and billing info to your new Australian info

  • Cannot Login with Guest Account

    I cannot login to OS X using the guest account I have enabled. When I try to login with the guest account, the window shakes no. How do I fix this?

    see this thread, will probably solve your issue
    http://discussions.info.apple.com/thread.jspa?threadID=1521487

  • Windows Domain Controller on Windows Server 2012 R2: Hyper-V roaming profiles not loading due to slow connection

    I have racked my brain and done everything that I know to do for about two weeks now.  I am setting up a new system at our fire department and I am having the worst luck with getting the workstations to login to the domain controller with roaming
    profiles.  It keeps telling me that the roaming profile could not be loaded because of a slow connection.  These are workstations that are connected directly to the switch that the DC is connected to.  I have tried multiple connections regarding
    the layout (DC into the router, router into the switch).  The router is a Cisco RV220W.  I have two VLANS, one for public and one for private domain.  The Private VLAN has DHCP turned off since I am providing it through the DC.  I currently
    have a connection from the Private VLAN going to the unmanaged switch that the workstations and server are plugged into.
    The server is a Dell PowerEdge R420 that has 6 NIC ports (1 dual port and 1 quad port).  I have a virtual switch setup on Hyper-V for an external port (let's say Card 2 Port 3) that is assigned to the WS 2012R2 Domain Controller.  The DC can see
    the internet fine and the workstations can connect to the shared folders on the server.  I can retrieve files by just using the computer name or FQDN.  The DC is also running DNS and DHCP.  The DNS has the _msdcs setup from when I installed
    the active directory role.  I have attempted to assign static IP addresses to the workstations:
    IP:                     10.0.0.80
    Subnet:             255.255.255.0
    IPV4 Gateway:  10.0.0.1
    IPV4 DNS:        10.0.0.12
    I've attempted "append the specific DNS suffix", I've "registered the connection in DNS", I've used "use this connections suffix in DNS registration".
    The server is assigned:
    IP:                     10.0.0.12
    Subnet:             255.255.255.0
    IPV4 Gateway:  10.0.0.1
    IPV4 DNS:         10.0.0.12
    The DNS entries have forwarders that forward to my ISP DNS servers for lookup
    I've enabled and disabled DHCP, I've installed a new VM just to create another DC to make sure that I didn't goof up when I created it.
    I've lost my patience with this project and am sinking fast.  Can someone please offer some advice as to what I've done wrong?  I've created this exact scenario at work many times but, I've never done it with Windows Server 2012.  Is this
    possibly something to do with the Dell PowerEdge server (Generation 12) with the SR-IOV?  I am going to attempt to work on it some more tomorrow when I get over there.  I think there may be an issue with the SR-IOV not being enabled on the machine
    through the Dell Bios.  Would the SR-IOV really cause the workstations to report a slow connection?  When I login at the domain controller the roaming profiles and folder redirection work fine so, I know the GPO settings are correct.  I don't
    have "ignore slow connections" or any of those GPO's set.  I need to get it working the correct way so, I didn't want to fool the server when there is another underlying problem.  Any help that someone can offer, I am more than willing
    to listen.  If you need more information, please ask.
    Thanks,
    Jay

    So, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
    post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
    virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
    Im disappointed in MS right now.

Maybe you are looking for

  • Camera raw won't update for Creative Suite CS5 for windows 7

    Hello, After a recent hardware meltdown I have recently reinstalled my CS5 Creative Suite onto a new machine (running windows 7). For some reason the Adobe Application manager won't update.  I keep getting the same error message and getting redirecte

  • ABAP Programm(RSIMPCURFILE) in Process Chain

    Hello, i have a problem with the Process Chain. I Would like to run an Process Chain with an ABAP Programm to load a Currency File automatic. The Program Name ist: RSIMPCURFILE. I have define an Programm variant with some Parameters  but i dosn't wor

  • How to get time stamp on Videos?

    Hi, When I tape only one video per day I also get the time stamp of that video. When I tape more than one, it does not show the time anymore. How do I get the time stamp then???

  • Source Structure determination Dynamically

    Hi , I got a requirement to develop a File to IDoc scenario. Below are requirement details. 1.  Source system application creates maximum 9 XML files of different strucure for each run. File name is generated dynamically by the source application. 2.

  • Windows 7 network file transfer absurdly slow

    I know there are plenty of other posts about slow network file transfer. Here, elsewhere, I can't say I read them all but most are referring to slow down to 1MB/s. I am getting <20KB/s. If I transfer a very small file (less than 100KB) it would start