CANNOT LOGON AS ADMINISTRATOR

Hi,
I upgraded my APPLICATION EXPRESS, which is within ORACLE DATABASE 10g EXPRESS, from version 2.1, to version 4.0.1 a few weeks ago. Everything went well till now that I need to logon as administrator. I simply cannot. I have done what the online help says I should do and what the upgrade document says I should do (both point to Oracle Application Express Administration Services - and their procedures differ), but whith no measure of success.
When, I try to logon as ADMIN, after both these procedure describe mention above, I get an "Invalid Login Credentials". And it is not that my password is wrong (I am certain about its correctness) or that that Listener is off (it is on).
Can someone help me.
Bennet
Edited by: Bennet on 2010/11/09 5:40 AM

Hi,
See this
http://www.oracle.com/technetwork/developer-tools/apex/upgrade-apex-for-xe-154969.html
Apex 3.x -> do not have database admin features.
You can login to Apex instance admin. For that is user ADMIN and instructions tell how set/reset that user password
Regards,
Jari

Similar Messages

  • When trying to install the latest version of iTunes, I keep receiving the error message "Cannot install due to insufficient privileges, logon as administrator". I am absolutelutely logged on as the administrator.  Help!!

    When trying to install the latest version of iTunes, I keep receiving the error message "Cannot install due to insufficient privileges, logon as administrator". I am absolutelutely logged on as the administrator.  Help!!

    Don't know if this will you but i fixed my issues with upgrading to 10.5.3.3 on Windows 7 you can access the steps i took here with an explanation of the problems i was having.  https://discussions.apple.com/message/17374864#17374864

  • Cannot logon to my console ?

    # ./imsimta version
    Sun Java(tm) System Messaging Server 6.1 HotFix 0.11 (built Jan 28 2005)
    libimta.so 6.1 HotFix 0.11 (built 16:16:35, Jan 28 2005)
    SunOS jt-mail2 5.9 Generic_112233-11 sun4u sparc SUNW,Sun-Fire-880
    When I logon to my SUN One Server Console,it said:CANNOT LOGON BEACASE OF AN INCORRECT uSER id,INCORRECT PASSWORD or Directory problem.
    but I have logon to it yesterday.
    How to do ?

    Hello,
    I have a similar problem except it was as a consequence of changing the hostname and ip address(could not be helped). I have changed practically all the configuration and xml files that are relavent to reflect the new hostname and ip address( local.conf, adm.conf, server.xml, ldap.conf, ds.conf and dbswitch.conf ...) and I'm still getting the error:
    "Cannot logon because of an incorrect User ID, incorrect password or Directory problem.
    HttpException:
    Response:HTTP/1.1 500 Server Error
    Status: 500
    URL: http://server:12166/admin-serv/authenticate"
    Question: in the file admin.conf, does anyone know if the entry that follows is tied to the server name or the application name? line 3: "cn=admin-serv-servername," I'm not sure if the portion where it has the server name should actually be the newserver name.
    SIE: cn=admin-serv-servername, cn=Administration Server, cn=Server Group, cn=servername.mydomain.com, ou=mydomain.com, o=NetscapeRoot
    Short of reinstalling, I'm hoping to get some feedback ..
    Thanks in advance

  • AIX install - cannot logon to J2EE

    I have just installed EP6 SR1 on AIX (well up to the WAS anyway)  and everything seemed to work except I cannot logon to the J2EE with the Administrator user id and password.
    I try http://myportserver.com:50000 and the J2EE start page appears but when I try the code examples I get a windows pop-up authentication and when I put in "Administrator" as my user id and my installation password I get no farther.....3 trys and an authentication error.
    Any idea......I think it may be a network issue as we only have one port open and numerous firewalls.
    Thanks
    Patrick

    Hi Patrick,
    I'm just installing EP 6.0 SR1 on Aix and Db2.  But we're having problems during WAS installation.          Did you have any problem with Secure Store installation?  I'm talking about JCE and Crypto Toolkit files.
    Error Message: Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
    I really appreciate your help !
    Thanks and regards from Mexico,
    Diego

  • License Error : 100000011 Cannot Logon;

    Some of the users get this error and unable to login,  "License Error : 100000011 Cannot Logon; the user is already connected to same Company".
    In this situation, the server has to be restarted. 
    Is there any other way to overcome this problem.  Restarting the server is incorrect option.
    Secondly, is there any utility to find out the logged on users to the server.
    Regards

    Hi
    This error occurs when
    -more than one user logged on with the same user name. Put in place better secuirity measures.
    -the SAP client closes immediatly and gives a windows error more than once. This you can resolve by restarting the service manager (license part) on the server.
    -inside sap you can see users logged on by going to the license administration window, but it shows the user names logged in. Not the pc's? The names are in a lighter grey.
    -From Microsft SQL you can see the pc's connected to a specific database.
    Hope this helps

  • VMware - I cannot logon to Windows 7 after upgrade to Yosemite

    After upgrading to Yosemite, I cannot logon to Windows under VMware Fusion 7.0.  It was working fine prior to the upgrade. The message I get when logging onto Window is,
    "The User Profile Service service failed the logon.
    The User profile cannot be loaded."
    I'm running on a Mac Pro Mid 2010 and Yosemite itself is otherwise working fine.  VMware was not running during the upgrade and re-start of the Mac.  I'm stuck and need to get this resolved any help is appreciated.

    I found the solution, I would have found it much earlier but just too tired and stressed from the week I guess
    Anyway it is NOT a Yosemite or even VMware issue, it figures it's just a good old Windows issue that dates back to at least 2010, why am I not surprised.   Probably as Windows was booting up and giving me the logon it was running anti-virus in the background and the user profile was corrupted, which means that Windows as usual was also not displaying a precise error message, just one that was close enough for Microsoft work. 
    The solution is easy especially if you can handle booting to Safe Mode and using Regedit, easier still if you have two user profiles in Windows even if one is just a duplicate of emergency uses, say like this.  The details can be found here, http://support.microsoft.com/kb/947215
    I was up and running within two minutes.  Whew.

  • Cannot logon user defined in header variable!

    Dear Guru's
    I'm seeing this this error when I type the URL. "Cannot logon user defined in header variable!"
    I have stopped and sterted the portal.
    I could not find the authschemes.xml (if this is related)
    Thanks,
    EP6 SP2
    Naren

    Hi ,
    Please explain what exactly you want to do ..If you want to use  Header Variables for User Authentication  go through this links
    http://help.sap.com/saphelp_nw2004s/helpdata/en/68/5ddc40132a8531e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/68/5ddc40132a8531e10000000a1550b0/frameset.htm
    Thanks n Regards
    Santosh
    Reward if helpful !!!

  • Outlook Cannot Logon Error - Exchange 2013

    Hi all,
    I simply cannot create an Outlook (2007 or 2010) account to connect to my new installation of Exchange 2013 in Windows Server Essentials environment:
    1) Using autodiscover:
    I get green ticks for "Establishing network connection and "Search for [email protected] server
    settings". At "Log on to Server" I get the error message "The action cannot be completed.  The connection to
    Microsoft Exchange
    is unavailable.  Outlook must be online or connected to complete this action"
    2) Using manual configuration:
    Outlook Anywhere (RPC over HTTP) Exchange Proxy settings configured using the internal FQDN for the Exchange
    server and negotiate for authentication.  Clicking "check name" button to resolve servername (internal FQDN) and
    username (user email address) gives error, "Outlook cannot logon.  Verify you are connected to the network and are
    using the proper server and mailbox name. The connection to Microsoft Exchange is unavailable.  Outlook must be
    online or available to complete this action.
    3) I can ping Exchange server using hostname and FQDN
    4) PC is member of the domain
    4) I have verified Exchange certiicate is installed on the client PC (although in the "Other People" certificates folder. Makes no difference when moved to the Trusted Root Certification Authority folder.
    5) I can successfully connect to the user mailboxes via OWA
    I've been working to resolve this issue for several days now and am at a complete loss as to what to do next to get this up and running.
    Any assistance will be greatly appreciated.
    RS
    RS

    Hi RS,
    Did you try to run Office Configuration Analyzer Tool (OffCAT) only for Outlook and check the results? If not, proceed and run the Tool and post the results.
    Additional info how to run the tool and check the results, you can find here: http://blogs.technet.com/b/catastrophic_failure_joannav/archive/2013/10/30/how-to-view-offcat-report-that-was-created-on-another-computer.aspx
    If no 
    Regards, Catastrophic Failure "JV"

  • Cannot logon to OWA and ECP

    Hi,
     I have a frustrating issue on EXCH 2013 SP1 CU7. Outlook clients work fine but logging onto OWA or ECP does not. When trying to logon to OWA we get infinite "still working on it" , ECP just blinks and we get logon screeen again. We cannot
    logon - independently on browser used. Problem is that there are NO errors in application nor in system log. We had also checked the IIS logs, and again, no errors(mostly OK 200 messages from clients connecting from outlook)
     Got this problem before CU7, hoping the update will resolve it but its the same. Tried to recreate OWA nad ECP virtual directories multiple times but no change. Everything is in default dirs.
    Exchange connectivity test, autodiscover is OK.
    Also have to point out that Frontend and Backend are using valid certificates(cert with public name for front end and selfsigned for backend)
    Auth for Backend (OWA and ECP) are anon and integrated(when i disable anaon, nothing changes), for Frontend - Basic for OWA and ECP is enabled - i.e. its in default state
    It worked till about 3 weeks ago...
     Can you help, please? Should I reinstall Exchange or its some bug? Thanks.
    sfs

    Hi fandango71,
    Thank you for your question.
    Did the issue occur all users?
    Did you use different browser to check if the issue persist?
    Is there former version Exchange server existed in organization?
    We could enable Windows Authentication on OWA and restart IIS to check if the issue persist.
    We suggest you post snapshot when you logon OWA for our troubleshooting.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • BEFW11S4 v4 cannot logon

    Have firmware 1.52.02 - have reset router 5 times, still cannot logon - user blank, password admin. Tried using both Easylink Advisor and Easylink Connector, but both abort telling me that I have an unsupported product. No longer have installation CD...
    Really urgent as I have 4 computers with port forwarding setup, but now that the factory settings (?) are set, nothing forwards... also the ssid has reverted back to linksys, so I know something has been reset. Can connect to internet and email via both wireless and cable, but simply cannot get in to change port forwarding, securing, admin via wireless and mac numbers.
    Have tried various permutations on admin as user and password, blank user with admin as password, my old user and password... blank user and blank password.. nothing works. One one occasion I used the back arrow on my browser and saw the setup page, but when I click on any other tab, another login screen pops up, then I get the 401 screen.
    Thanks for any help on this.

    Do you get a lan ip when connected directly to the modem? If your modem is giving your router a lan ip. they might be on the same range and conflicting with the router. Try disabling firewalls and antiviruses.

  • Changed FTP - "contribute cannot remove the administrative settings"

    We developed a major site at a temporary subdomain on our server. Then, we changed that subdomain (to replace an old version of the site with this new version).
    I created a new FTP account for this new location. (The files are at the same place on the server, but under a new http:// location) This FTP account works fine with other FTP client software.
    When I try to create a new Contribute connection (using CS4), it notices the site has moved and asks whether I want to remove the administrative settings. I say "yes." When I do, the error message I keep getting is "contribute cannot remove the administrative settings."
    I double checked file permissions for all the files within the /_mm subdirectory. They were set at 644 (for files), so I changed them to all to 664 to include access by the new username.
    Any ideas as to why Contribute can't "clear the slate?" And is there some way to force this, even erasing files manually?
    Best,
    Greg

    Hi,
         Can you change the ownership of the files and folders in the _MM folder and also that of _MM folder, to the new FTP user, and then try removing the administration settings?
         Also, I wanted to ask, does the new FTP user belongs to the same user group as that of the old user, if not, try adding the new FTP user to the same group and then try removing the administration.
         Hope this helps.

  • You cannot logon (CUA system assignment missing)

    I request the access to HU2,... systems, but when I tried to logon via GUI, got the error message - You Cannot logon (CUA system assignment missing).
    I tried Web GUI, it tells me that user name and password not valid,...
    Any clue?
    Thanks,
    Andrew

    Dear Andrew!
    Sorry for delay reply, I hope your problem has been solved till now. Anyhow my reply may help to other guys.
    Sometime this error will appear after System copy/migration or technical upgrade.
    Suppose that xyz user face an error "You cannot logon (CUA system assignment missing)" during login attempt after system copy/migration or system upgrade.
    Solution:
    Login as sap* user and reset xyz user password in su01. New password length of xyz should be at least 14 to 15 characters. If you are unable to login as sap* then reset sap* user with database utility in usr02 table and remove parameter u201Clogin/no_automatic_user_sapstaru201D from profile if active. Login as xyz user and insert new password with any length at new password windows.
    After successful login of xyz user, do the same practice for all users who are facing the same problem.
    Regards.
    Yasir.
    Edited by: Muhammad Yasir Shafiq on Mar 29, 2011 10:07 AM

  • Can't logon Visual Administrator due to a java exception

    Hello,
    since my last logon to VA, I cannot anymore logon to Visual Administrator with my admin user. Last time, I changed the Security Provider - authentication template for the SAP-J2EE-ENGINE component.
    Here is my trace:
    #1.5 #C000370C0292000000000001004600C000044FED4ED8C478#1213780555515#com.sap.engine.services.adminadapter.gui.tasks.LoginTask##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-2,5,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Java###Error while trying to login to aor3d2jas.aosrm.atosorigin.com: Authentication failed.
    [EXCEPTION]
    {0}#1#com.sap.engine.services.security.exceptions.BaseLoginException: Authentication failed.
         at com.sap.engine.services.security.login.ModulesProcessAction.run(ModulesProcessAction.java:168)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.services.security.login.FastLoginContext.login(FastLoginContext.java:181)
         at com.sap.engine.services.security.remoteimpl.login.RemoteLoginContextHelperImpl.login(RemoteLoginContextHelperImpl.java:72)
         at com.sap.engine.services.security.remoteimpl.login.RemoteLoginContextHelperImplp4_Skel.dispatch(RemoteLoginContextHelperImplp4_Skel.java:64)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.security.core.server.jaas.DetailedLoginException: javax.security.auth.callback.UnsupportedCallbackException: com.sap.engine.services.security.exceptions.BaseUnsupportedCallbackException: <Localization failed: ResourceBundle='com.sap.engine.services.security.exceptions.SecurityResourceBundle', ID='Handler com.sap.engine.services.adminadapter.gui.tasks.LoginTask@3727c5 does not support callback com.sap.engine.services.security.remote.login.SerializableGetterCallback@1140709', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key Handler com.sap.engine.services.adminadapter.gui.tasks.LoginTask@3727c5 does not support callback com.sap.engine.services.security.remote.login.SerializableGetterCallback@1140709
         at com.sap.engine.services.security.remoteimpl.login.RemoteCallbackHandlerImpl.handle(RemoteCallbackHandlerImpl.java:92)
         at com.sap.engine.services.security.remoteimpl.login.RemoteCallbackHandlerImpl_Skel.dispatch(RemoteCallbackHandlerImpl_Skel.java:63)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200)
         at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:716)
         at java.lang.Thread.run(Unknown Source)
    Do you have a idea what to change with the config Tool to set back SecurityResourceBundle?
    Thks a lot,
    Tanguy Mezzano

    Use the SAP Note 957355!

  • When i login with microsoft account cannot access with administrative share c$

    i have a problem when i login to windows with microsoft account cannot access any network computer with administrative sharing c$,d$ with windows 8.1 
    but when i login with local account can access
    and some people tell  me create key in regedit t fix it 
    after enter user name and password show this error 
    and i apply your instruction  and not fix until now
    note:
     my Machine windows 8.1 if another machine in network windows 7 can access a hidden share if machine in network windows 8.1 show this message in image 2 
    but if i login with local user can i access all machine hidden share network windows 7 and 8.1

    yes this computer i want to access  name poland2-work and have two users 
    first :administrator
    second : poland 2

  • Customer cannot logon

    Customer can logon but when he tries to register for an email invite the account would not work. He asked for a password reset and now he cannot get in at all and has not gotten the password in email.
    106177 account #
    [email protected]
    Customer needs phone contact please to correct:
    Logan Giesie
    361-972-7820

    Please read this FAQ:
    http://forums.oracle.com/forums/ann.jspa?annID=14
    Cheers, OTN

Maybe you are looking for