Cannot logon to iPhone4s in ios 6
I upgraded my iPhone 4S last night and it was working just fine up to now. I clicked to you Map with 3D and locating where I was. Suddenly, there was voice from iPhone, I believe it was Siri although I did not change my iPhone setting so far. The voice switch was actually turned off but voice still came and kept talking. I am currently in the middle meeting then I decided to reboot my iPhone. Once it was back on, Siri still kept asking me to key in my password and I did. What happened was that once I key in my password that was 4 numeric, the black round cicle did not show up while my iPhone was slow response. When my password filled, I saw a transparent box moving from digit to digit I keyed in. After 2-3 seconds, screen went black and turned off. I turned on again and did the same logon but it turned out the same. I also tried to slow the volume down while the voice switch was still off, the response was very slow.
I decided to do hard reset on my iPhone 4S and expected to clear up the memory. Once I turned it back on, it performed the same action after I rebooted. Now my iPhone 4S seems to be inaccessible and looks dead to me.
Could you help to bring back my iPhone.
Thanks.
CTH-1099
I have a similar problem. I upgraded to IOS 6.0 then during the first sync my 500+ .pdf files were deleted from my device and will not sync back.
Stangely, I tried syncing the pdf files to my iPhone 4S to see if this was an IOS 6 issue, but that works fine - although with my non-retina eyes I can't read them :-S.
I've tried restoring the iPad (twice), unselecting books for sync, then reselcting and resyncing but no joy.
I have sent a couple of pdfs to my Kindle account and that works okay, but I don't want to have to send 500 pdfs to Kindle!
Anyone else having the same issue?
Similar Messages
-
After I upgrade iphone4 to iOS 4.3.5 and turns out cannot sync anymore
After I upgrade iphone4 to iOS 4.3.5 and turns out cannot sync anymore
Please helpWell, I was able to get it to sync by opening iTunes first, and THEN connecting the iPhone. And it does sync but still will not sync with iPhoto. I also unchecked and rechecked the option to "Open iTunes automatically when this iPhone is connected" and now iTunes opens and syncs automatically. But tried the same thing with iPhoto to no avail.
Any ideas for iPhoto syncing?
Dukes, since you are running on Windows you might open a new discussion, or try this solution someone else posted that pertains to Windows: http://support.apple.com/kb/TS1538 -
Since I updated my iphone4 to iOS 6.0 I cannot log onto my home wifi
Since I updated my iphone4 to iOS 6.0 I cannot log onto my home wifi
Omg, it worked! Thank you so much --- it's been driving me nuts for weeks now! The sound can get really annoying, lol!
-
After updating my iPhone4 to iOS 6.0 I cannot text on Facebook in the portrait style anymore! Help!
ios 6.1.2 can not on a iphone 3g
-
I cannot find my iphone4s on itunes 11.1.1
I cannot find my iphone4s on itunes since itunes 11 version.
and then I update it to the latest 11.1.1. and hope that I can find it. But it is not.
I try to change my usb cable; doesn't work.
I try to plug in - plug out many times; doesn't work.
I try to restart the service in control panel.(Refer to Apple's instruction); doesn't work.
What should I do? Thank you in advance.
Remark: I haven't update my iphone to the ios7 yet. Because I saw that it doesn't work well on other device.Hello pitichai,
I would be concerned as well if my iPhone was not recognized by iTunes. Thank you for providing all the information with the steps you took in regards to this issue.
You have taken some really good steps already, but I found an article with a few more steps you can take (you can skip steps 1-4 because you have already tried those):
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I just update my ipad2 and iphone4 to ios6 but now
My two device bluetooth cannot connect with any other
Ios device.Are you running Leopard on your Mac, Laurie?
If so, try instead updating to iTunes 10.6.3.25. (That supports earlier models of iPhones running iOS 6, even though it can't run the new iPhone 5s.)
A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3 -
Updating iPhone4s to iOS 6.1.2
When I try to update my iPhone4s to iOS 6.1.2, I get a message:
"Unable to Verify Update
iOS 6.1.2 failed verification because you are no longer connected to the internet"
I am always connected to the internet wirelessly or via 3G but I am being told that I am not connected to the internet!
Please help.Try to update using iTunes on your computer and make sure that your security software settings are not blocking the needed contact to Apple during this process:
iTunes: Troubleshooting security software issues -
I have an iPad (original). I cannot complete the update to iOS 5. It gets to the "backup" stage and then finds an error (-402653081). It asks if I want to continue, with a warning that "continuing will result in the loss of all contents on this iPad." What can I do?
Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.
-
I cannot get my iPad air iOS 8.1.2 to talk to my epson wf 3640 which driver is 9.31. Both are on the same network so I am not sure why it is not working. Any help or suggestions would be greatly appreciated. Thanks
Hi otterSD,
When it comes to using AirPrint and it is not seeing your printer, the check the troubleshooting below to get it sorted out. You have already made sure it is on the same wireless network, so check to make sure that the printer does not need attention with any errors and check Epson’s website if there is any firmware updates for the printer.
About AirPrint
http://support.apple.com/en-us/HT201311
If you're unable to print
Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
Make sure your printer has paper, and enough ink or toner installed.
Make sure your printer is connected to the same Wi-Fi network as your iOS device.
Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
Take it easy,
-Norm G. -
VMware - I cannot logon to Windows 7 after upgrade to Yosemite
After upgrading to Yosemite, I cannot logon to Windows under VMware Fusion 7.0. It was working fine prior to the upgrade. The message I get when logging onto Window is,
"The User Profile Service service failed the logon.
The User profile cannot be loaded."
I'm running on a Mac Pro Mid 2010 and Yosemite itself is otherwise working fine. VMware was not running during the upgrade and re-start of the Mac. I'm stuck and need to get this resolved any help is appreciated.I found the solution, I would have found it much earlier but just too tired and stressed from the week I guess
Anyway it is NOT a Yosemite or even VMware issue, it figures it's just a good old Windows issue that dates back to at least 2010, why am I not surprised. Probably as Windows was booting up and giving me the logon it was running anti-virus in the background and the user profile was corrupted, which means that Windows as usual was also not displaying a precise error message, just one that was close enough for Microsoft work.
The solution is easy especially if you can handle booting to Safe Mode and using Regedit, easier still if you have two user profiles in Windows even if one is just a duplicate of emergency uses, say like this. The details can be found here, http://support.microsoft.com/kb/947215
I was up and running within two minutes. Whew. -
HT4623 Should I update my iphone4 to iOS 7?Are there any problems in this?
Should I update my iphone4 to iOS 7?Are there any problems in this.
I read the same thing about iOS 3, 4, 5, 6. You come to a forum that provides support, you are going to read problems. I did not have any, but I didn't come here to report that. Just like asking if everyone you see in an emergency room is sick.
-
Cannot logon user defined in header variable!
Dear Guru's
I'm seeing this this error when I type the URL. "Cannot logon user defined in header variable!"
I have stopped and sterted the portal.
I could not find the authschemes.xml (if this is related)
Thanks,
EP6 SP2
NarenHi ,
Please explain what exactly you want to do ..If you want to use Header Variables for User Authentication go through this links
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/5ddc40132a8531e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/5ddc40132a8531e10000000a1550b0/frameset.htm
Thanks n Regards
Santosh
Reward if helpful !!! -
Cannot logon to my console ?
# ./imsimta version
Sun Java(tm) System Messaging Server 6.1 HotFix 0.11 (built Jan 28 2005)
libimta.so 6.1 HotFix 0.11 (built 16:16:35, Jan 28 2005)
SunOS jt-mail2 5.9 Generic_112233-11 sun4u sparc SUNW,Sun-Fire-880
When I logon to my SUN One Server Console,it said:CANNOT LOGON BEACASE OF AN INCORRECT uSER id,INCORRECT PASSWORD or Directory problem.
but I have logon to it yesterday.
How to do ?Hello,
I have a similar problem except it was as a consequence of changing the hostname and ip address(could not be helped). I have changed practically all the configuration and xml files that are relavent to reflect the new hostname and ip address( local.conf, adm.conf, server.xml, ldap.conf, ds.conf and dbswitch.conf ...) and I'm still getting the error:
"Cannot logon because of an incorrect User ID, incorrect password or Directory problem.
HttpException:
Response:HTTP/1.1 500 Server Error
Status: 500
URL: http://server:12166/admin-serv/authenticate"
Question: in the file admin.conf, does anyone know if the entry that follows is tied to the server name or the application name? line 3: "cn=admin-serv-servername," I'm not sure if the portion where it has the server name should actually be the newserver name.
SIE: cn=admin-serv-servername, cn=Administration Server, cn=Server Group, cn=servername.mydomain.com, ou=mydomain.com, o=NetscapeRoot
Short of reinstalling, I'm hoping to get some feedback ..
Thanks in advance -
AIX install - cannot logon to J2EE
I have just installed EP6 SR1 on AIX (well up to the WAS anyway) and everything seemed to work except I cannot logon to the J2EE with the Administrator user id and password.
I try http://myportserver.com:50000 and the J2EE start page appears but when I try the code examples I get a windows pop-up authentication and when I put in "Administrator" as my user id and my installation password I get no farther.....3 trys and an authentication error.
Any idea......I think it may be a network issue as we only have one port open and numerous firewalls.
Thanks
PatrickHi Patrick,
I'm just installing EP 6.0 SR1 on Aix and Db2. But we're having problems during WAS installation. Did you have any problem with Secure Store installation? I'm talking about JCE and Crypto Toolkit files.
Error Message: Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
I really appreciate your help !
Thanks and regards from Mexico,
Diego -
i keep getting error 3194 when i try to upgrade my iphone4 on ios 5.1.1 to ios6.what should i do?
From the page which you posted your question:
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Maybe you are looking for
-
After upgrade to IOS 7.1.1 option in Calendar to invite others no longer there.
This is for a Microsoft Exchange email account. Is there a way to add this back? Checked settings and did not see an option.
-
How do I add a page in the book, programmatically.
I use Weblogic 10.2. We need to make when you press the button on the page, to add another page. How can I do? Help please. If possible, I would like to see an example of working code.
-
Regarding intrastat inclusion/ exclusion report
Hi, In the billing document header data under the for trade tab and in the declaration there is a field called inclusion/exclusion indicator.some one please explain how this field is given a value.urgent pls. Thanks In advance
-
Getting following exception on TCP ssl at server side
Hi, I am trying to setup an ssl client and ssl server. But on ssl client side, My need_wrap going into loop(Buffer overflow) On my server side, i am getting following error. Please help me...I am not getting much discussion/articles to solve this pro
-
Error 9672 when I try to print to Epson Stylus CX7400
Printer had been working fine for months, then suddenly get error 9672 message. What can I do?