Cannot make backups with timemachine, external harddisk and airport extreme

Hi to everyone,
yesterday i bought me a brandnew airport extreme station. i would like to use it for creating a wifi-network in my flat. besides i would like to connect my external 500GB lacie-harddisk with the airport extreme. in the past i this harddisk was connected with my imac over the usb-port. unfortunately timemachine does not recognize my harddisk. in the timemachine setups i can choose my harddisk but when the backup-process should start, timemachine stops immediately and tells me that the backup-volume wasn't found. whats wrong? does anybody know a solution?
Greets from Germany
Thomas

pantomas wrote:
why is my setup not supported? i read on this page
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html
in that very article, in the second sentence, it clearly says *Time Machine can’t back up to an external disk connected to an AirPort Extreme* ...
so whats my mistake?
a misunderstanding ? say you have 2 Macs on your network. one of them has an external hanging off it. the other Mac could back up to that drive via your network ...
some users, however, successfully back up via an extreme and some don't get it to work. you might be one of 'em.
JGG

Similar Messages

New help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd

new help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd would like 2 store my home videos and pictures on the time machine (ONLY) as the MAC AIR has storage space limited space please help. THANK YOU.

See the info here about sharing or using the TC for data.
Q3 http://pondini.org/TM/Time_Capsule.html
It is extremely important you realise.. the Time Capsule was never designed for this.
It is a backup target for Time Machine.. that is the software on the computer that does backups.. it has no direct connection to the Time Capsule.
It has no ability to back itself up.. unlike all other NAS in the market. It is therefore likely one day you will lose all your files unless you seriously work out how to backup.
The TC is slow to spin up the hard disk and fast to spin down. iTunes and iPhoto will continually lose connection to their respective libraries.
iPhoto in particular is easy to corrupt when you move photos over wireless into the library.. once corrupted all is corrupt. A single photo will ruin it all.. so backup is utterly essential.
Time Machine cannot do backups of network drives. ie the TC. You will need a different backup software like CCC. You will then need another target to backup to..

Is anyone using NETGEAR Push2TV with a MacBook Pro and AirPort Extreme and does it work well for you?

I am interested in buying a NETGEAR Push2TV display TV streamer to use with my MacBook Pro and AirPort Extreme.
I saw on the Netgear site that a Intel Wireless Display/WIFI driver software is required for PC's; do we have this software installed already on our MacBook Pro's? Is any one using this box and does it work well for you, any problems or setup issues?

trying to find out same thing , store said works with new intel processor, My mini dont finding.....

HT204057 new help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd

i just bought a new mac air and the new airport extreme time capsule im would like to know how to use the time capsule as storage for my pics and videos as the mac are has low storage space can any one walk me through this process?

See the info here about sharing or using the TC for data.
Q3 http://pondini.org/TM/Time_Capsule.html
It is extremely important you realise.. the Time Capsule was never designed for this.
It is a backup target for Time Machine.. that is the software on the computer that does backups.. it has no direct connection to the Time Capsule.
It has no ability to back itself up.. unlike all other NAS in the market. It is therefore likely one day you will lose all your files unless you seriously work out how to backup.
The TC is slow to spin up the hard disk and fast to spin down. iTunes and iPhoto will continually lose connection to their respective libraries.
iPhoto in particular is easy to corrupt when you move photos over wireless into the library.. once corrupted all is corrupt. A single photo will ruin it all.. so backup is utterly essential.
Time Machine cannot do backups of network drives. ie the TC. You will need a different backup software like CCC. You will then need another target to backup to..

External Drive and Airport Extreme ?'s

I am using my airport extreme as a bridge for wireless printing (I currently have the AT&T U-Verse Residential Gateway as my router) and trying to use an external drive for both my imac and macbook for backup. I know I have accessed it a few times this way but now I get a message that says "can't find original item" or something to that effect. When I open the airport utility, I can see it as a disk, when I open finder, I click on my airport under shared and select my external drive and connect as me with the password. It takes a while to come up with the message cannot find original item. I can hear the external drive power up when I connect. Is there something I'm missing? I can plug it into both the imac and macbook directly and it works fine. I do have file sharing turned on. All suggestions appreciated. Thanks!

I have a new question, and perhaps I am supposed to start a "new question":
Actually, yes, you should if you want it to get the attention it deserves to solicate assistance from other users.
I am setting up this shared hard drive and it has the option under airport utility to "share disks over the internet using Bonjour. I checked this box and it directed me to create a global hose name and password, which I did. So now that that is done, how do I actually access my "global hose" when connected over 3G or not at home? What do I type in safari to get to it?
Interestingly, this option never seemed to ever get fully implemented as it required a combination of services that no one seems to offer. This service uses wide-area Bonjour.
Also, if I want to access with a Windows computer, it asks for WINS Server info. No idea what to put in there.
This option is not required so you can safely ignore it.

Can I backup to an external drive on airport extreme

Have Airport extreme with a usb port free for use- can I hang an external drive on it and use time machine to backup my macbook. I am new to Apple from the pc world and lovin it

I just updated the firmware on my extreme and am using it with a USB disk for Time Machine right now, It seems to be working fine...a little slow but working.

Rec Specs for External HD and AirPort Extreme

I've been using my AirPort Extreme for a few months now and am very happy with the product. I've encounterd one problem, though. I have an external harddrive attached to the AirPort Extreme to wirelessly share my various media libraries (iTunes, iPhoto, etc.). The HD works fine usually when I'm using it to play music via iTunes on my MacBook or from my MacBook to my AppleTV via AirPlay. The HD will just stop working if I do anything more intensive than that, though, like burning CDs or downloading multiple podcasts at once. The HD is an older LaCie 250GB; I'd provide a product number, but it doesn't have one visible.
Is the issue I'm having resulting from the HD not being powerful enough to support the task of being shared wirelessly while performing more demanding tasks? If so, I assume I would need to purchase a newer drive. If so, can someone recommend specs to look for for a drive that will be able to be shared wirelessly using an AirPort so that I can both access my media libraries and write to them without the HD dropping out in the middle of the process?
Thank you.

I just found out something today which might help you Daniel, but that doesn't solve our problem in a "classic" way...
So I was very obsessed by the fact that Windows Vista could actually access the shared HD with Bonjour and with a lot of testing I found this : let's say my macbook pro was off, if I would access the HD with Vista and then open up the MacBook Pro, then there would be no problem.
Eventually I found out that the problem really came from the fact that my WD MyBook 1Tb external drive was putting itself on standby after a while (which is a good thing actualy). When I was trying to connect to the drive while it was on standby with Finder, it would try to connect forever... however, it would physically wake up the external drive (I could tell by the sound)... but too late for Finder, and no way to access it other than rebooting the Mac... OR crashing Finder (Apple Menu - Force to quit). Then the Finder restarts automatically and the drive works.
I really don't like this solution (having to crash finder) but it works.
PLEASE if someone has a better way, let me know !!!

Problems with Comcast (Motorola) modem and Airport Extreme

I have a very strange problem which I have been unable to solve, nor able to find a solution on Apple Support or anywhere else by Googling it.
I switched back to Comcast/Xfinity, hooked up the Motorola surfboard SB5120 modem:
My primary Macbook Pro connects to the Internet, but (and this is bizarre!) the AirPort Extreme is flashing yellow with the errors listed as a) no Internet conncetion, and b) no DNS server
All other Wi-Fi devices are *unable* to connect to the Internet; they are connecting to the home network, but nothing else.
I did a "hard" reset of the AE, and setup the home network from scratch, same problems: one Macbook connects, nothing else does.
I have power cycled everything multiple times (even unplugging EVERY cable for 30 minutes, then reconnecting), spent the better part of 6 hours trying tor resolve this.
Any other settings to change?
In AirPort Utility colors:
Green for Internet
Flashing Yellow for AirPort Extreme (errors: a) no Internet conncetion, and b) no DNS server)
Green for AirPort Express
sub-menus:
1) Internet, set to "DHCP", nothing listed for IP Address; the Subnet Mask and Router Address have assigned numberes; the last three windows are empty.
2) Wireless, set to "WPA2 Personal"
3) Network, set to "Off (Bridge Mode)
Any solutions would be most welcomed - the idiot at Comcast was insultingly unhelpful. He said that since I was able to successfully connect to the Internet, and that the modem was successfully pinging back to Comcast, that the problem was with the AirPort Extreme.

Many thanks for your reply. I think number 3) below gets to the crux:
1) The MBP is on my network, for sure, not a neighbor's. I'm doing all of this wirelessly, though tested the modem via Ethernet to make sure the modem was working.
2) I reverted to the Verizon DSL modem, it did a handshake with the AE, and all the computers were successfully connected in seconds.
3) Network set to "Off (Bridge Mode)" is how all the computers are successfully connecting via Verizon, so what am I doing wrong when using Comcast? If I set it to "DHCP and NAT" or "DHCP only" I would have to enter a range of DHCP addresses (Comcast's *might* be 192.168.100.1, but not entirely sure (any help on that - might solve the problem?)
Extreme/Express - that was a mistake. I'm solely using an Extreme for this setup, though I also have an Express, I've temporarily taken it out of the network to try to resolve the issues.
Thanks again!

Setup Guest Network with OS X Server and Airport Extreme - NEED HELP!

Hi All,
So I have a small business with a Mac Mini Server (10.6.5) and an Airport Extreme. The Airport is handling the routing and DHCP duties, while the Server is handling the DNS. The Airport is pointed to pull DNS from the Server. All internal systems work great accessing the internet and folders on the Server.
I need to setup a Guest network for internet access, so I turned this function on in the Airport Extreme. It sets up fine, but if you connect to that new Guest Network the system hangs trying to open a web page. My thinking is since the Server is the one handling the DNS it is not working for Guest computers since they are not part of our internal network. At least that is my theory, I could be wrong.
With this type of setup what do I need to modify to get this working? Anyone have any ideas?

After trying for days to figure this out I was finally able to get a working solution and I now have my APE providing a guest and main network while using my lion server as the Dsn server for the main network.
The setup is a bit of a hack and does require you to have at least two devices with staticly assigned ip information on the main network but it does allow you to serve dhcp for both networks from the server and make some services available to the guest network such as iTunes remote for parties.
1) delete your custom Dns entries from the Internet settings in the APE and set two dhcp reservations for .2 and .3 (in this case my Mac mini server and my airport express)
2) reduce the dhcp range to only have 2 available IPs (10.0.1.2-10.0.1.3) and save settings
3) on a computer connected to the main network install wireshark and begin sniffing for packets. Connect at least one device to your guest network and look for any packets that have an ip from your guest network (usually 172.16.42.x) once you capture one of these packets expand the vlan information. This should list a vlan ID ( in my case this was 1003. I would suspect this is universal but do not know)
4) on your server open network preferences, click the gear at the bottom and click "manage virtual interfaces", add a vlan that matches the vlan ID from above. Click ok and apply your settings. The vlan interface should get an ip in the guest network range from your APE.
* if you are running lion you will need to install server admin tools before proceeding*
5) open server admin and add the dhcp service. Create an entry for your primary network (ex: 10.0.1.x) make the dhcp range one higher than the settings in step 2 ( ie: 10.0.1.4 to 10.0.1.253) assign this to the physical interface. Make sure this entry has your internal DNA servers
6) add another entry for the guest networks ip range (ex: 172.16.42.x) again set it one ip higher than step 2 ( 172.16.42.4 to 172.16.42.253) save and activate both ranges. Assign this range to the vlan interface. Make sure this entry either contains your isps dns servers or another public dns server. Turn on dhcp.
Because you have now assigned the only two addresses in the APEs pool for your primary network to static entries there will not be any addresses to assign and the APE will not respond to requests. This will allow your server to pick up the work of assigning IPs. As for your guest network, the APE will assign IPs for two host and then stop. Your clients may either get an IP from the APE or the osx server so both should have the same info. Just make sure the two static clients on your main network have the local DNA servers entered manually.

Best connection with U-verse Gateway and AirPort Extreme

These past couple of weeks I've been having problems where my AirPort Extreme (connected to my U-verse Gateway) has been randomly rebooting. I had Apple exchange the entire unit along with power cables and AT&T has already switched out the Gateway and it was STILL rebooting. I finally reset both to factory settings and started fresh. I turned off the Wireless on the U-verse Gateway and the Extreme is in Bridge Mode. That is how its always been and luckily fixed the rebooting. I am now having issues with my devices losing connection. For example, on my iPad Air, it'll show it is connected to my Network, but going onto Safari and trying to load a page gives me the "Server Not Responding" error. Issues also happen on not only Apple devices, but on a Wii U where I get connection errors. I HAVE NOT had these problems on my iMac (which is wireless), just on these other devices. I have not messed around with DMZ Plus Mode or changed any settings on the Gateway other than turning off the Wireless. I think it might have something to do with IP Addresses or something, but I am really not sure. If you have this same set-up, are you having these issues or what settings do I need to change? Thank you!
U-verse Gateway Model: 3801 HGV
AirPort Extreme 5th Generation

Ok so I began by reseting both devices and that fixed the majority of the "Server Not Responding" errors. BUT now I'm getting the problem where the AirPort Extreme randomly reboots. Like all of a sudden, all my devices will be disconnected from WiFi. When I go to the router, the Amber light is blinking then goes back to green. This was the issue from the very beginning and it really is very annoying. Can anyone help? If not, I'll try to contact AppleCare and post their solution in case somebody else is having these issues.

Wireless connection to internet with mac pro tower and airport extreme base station?

Hi, I have an airport extreme base station and a mac pro tower without a airport card. My internet wireless router is a great distance from my computer so I can't connect the base station directly to the router. I've attached the airport extreme base station to the tower via an ethernet cable, the base station seems to be wirelessly connected to the home network but the browser is showing "not connected".
Please help.
Thanks

Shouldn't the Airport base station be able to connect to it wirelessly?
It might be possible, but the Ethernet ports on the AirPort Extreme would not be enabled, even if it did connect to the Thompson' WiFi signal.
As Tesserax notes, among the Apple routers, only the 802.11n versions of the AirPort Express have the capability to "join" a wireless network with the Ethernet port being enabled.

ITunes on an external HDD and Airport Extreme BS

Ok, sorry to be boring, but I can't get this to work as I think it should.
I want to have a central iTunes library based on the USB-connected 1TB HDD, so that I can train all my Macs to reach for the files from the same place. So that I can access the same tunes and movies from my "MBP", "Intelimac" and "Intelimac2". I have copied the iTunes library from Intelimac 2 over onto the HDD, and in iTunes preferences told it to look for the files on my Airport-connected HDD - and it does. Mostly. I have 600 movie files on that HDD, but when I start up iTunes on the Intelimac and the MBP, there are only the 56 or so original movie files showing up in the Movies list. When I click on a random movie in that list, and ctrl click it, then "Show In Finder", it does indeed point to the correct folder way over there on the External HDD. So why doesn't the list in iTunes show ALL 600 movies available in that same folder?
Similarly, there are discrepancies between what shows up in iTunes lists, and what it SHOULD be showing, baring in mind there are hundreds of other media files available to be displayed and therefore played. It's as though iTunes is ignoring many of the tracks/playlists/movies in the same folder that it is indeed recognising and offering up to play...
What am I doing wrong?
Cheers for any help.
Chris
Message was edited by: ChrisRR

Just had the same problem. I found the answer in other message threads. A solution would be to click on the option button immediately when you launch iTunes. A message box will pop up instructing you to select a library. This should allow you to choose the music library from the external drive. See the url below.
http://docs.info.apple.com/article.html?artnum=304447
It worked for me. Good luck!

Can Anyone help with printing with iphone to lexmark and airport extreme

I don't have a air print compatible printer, and none of the apps available in the appstore are able to print! They recognise the printer, which is an (all-in-one) but nothing prints on giving the print command.
Any thoughts?

did the google for you
http://support.apple.com/kb/HT5209
http://www.apple.com/airplay/
https://discussions.apple.com/thread/4228700?start=0&tstart=0
http://www.youtube.com/watch?v=YCnFfAr1HaM

Backup timecapsule itself with an external harddisk with usb

I want to make a backup of the timecapsule with an external harddisk with an usb

Make sure that the USB drive is formatted in Mac OS Extended (Journaled), then connect it to the USB port on the Time Capsule.
On your Mac, open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Disks icon
Click the Disks tab below the icon
Click Archive
Allow plenty of time for the backp to occur since all of your backup history will be archived. Normal Time Machine backups will not occur during the archive process.

Hello everyone! Can anyone make backup with NvBackup from his Tungsten E2 and send it to me, please? :3

Hello everyone! Can anyone make backup with NvBackup from his Tungsten E2 and send it to me, please? :3
I got corrupted bluetooth module on my ROM (hard reset does not help ).
Can anyone make backup *after[if you can]* hard reset and send it to me?
Please make link to rghost.ru or dropbox :3
Post relates to: Tungsten E2

Hello everyone! Can anyone make backup with NvBackup from his Tungsten E2 and send it to me, please? :3
I got corrupted bluetooth module on my ROM (hard reset does not help ).
Can anyone make backup *after[if you can]* hard reset and send it to me?
Please make link to rghost.ru or dropbox :3
Post relates to: Tungsten E2

Cannot make backups with timemachine, external harddisk and airport extreme

Similar Messages

Maybe you are looking for