Cannot MESH Multiple MAPs to Single RAP

Hello,
Our environment consisits of ~200 1552E APs. Up until recently we have used either Cat6 or fiber to connect them to our network. Recently we have begun meshing APs instead of running the Cat6 or fiber. The meshed APs have been single MAPs connected to single RAPs.
This week I have started testing multiple MAPs. Painfully, I have not been successful with meshing more than one MAP to a RAP. For instance, I have set up a RAP with a BGN of "MESH_TEST" and two MAPs with the same BGN. If I power the RAP with MAP #1, the meshed link works like a charm. If i power on MAP #2 and power down MAP #1, the mesh between MAP2 and RAP works great. If I attempt to power both MAPs, only one of the MAPs will establish a connection to the RAP while the other cycles through it's discovery for meshed neighbours and WLC.
Have I overlooked anything?
On the contrlloer I have executed the following command - debug capwap events enable
What I see in the log is the following line that continues to occur for the MAC address of the unconnected MAP.
*RRM-DCLNT-2_4: May 15 14:05:20.520: d4:d7:48:6d:6c:60 Unable to find data structure for AP D4:D7:48:6D:6C:60
I have searched the forums and documentation for this error/message and cannot locate any reference to it.
Thanks for any assistance.
Cheers,
André

This should work and in my view you have not left anything here.

Similar Messages

In XI Mapping multiple fields mapping to single target field.

Hi Friends,
In XI Mapping multiple fields mapping to single target field.
For example my requirement is :
Source Fields:(This RFC BAPI Structure)
Empno                0-1
EmpName           0-1
Address             0-1
Taget Field is:
Details               0-1
The above three fields passed to the Details Field. Here i am using Concat function
But i have one query on that on,Every field having "line Break" required.
Can you please help me out above this requirement.
Thanks in Advance,
Sateesh N.

If you want a line break between the three fields, then try
passing a,b,c to the udf and in the udf you would have
return a+"\n"+b+"\n"+c;

Cannot group multiple limit items in single local PO (ECS)

We are on SRM 5.0 (SRM SERVER 5.5 SP 9) and are using SRM in the
extended classic scenario.
We use limit carts and want to be able to create a single PO with
multiple limit items. However, it seems that the implementation of note
1020305 as of SP 9 prevents the possibility to group limit items together in a
single PO completely. I tried implementing the BADI 'BBP_GROUP_LOC_PO' but it had no affect.
Can someone please provide some advice on how to group multiple limit items into a single PO?
Thanks,
Nick

Hi Atul,
Thanks for the note - it was useful, although I don't think I can get my issue resolved as it implies we cannot group multiple limits into one PO.
Can you please explain what the sentence "Multiple packages are possible starting from SRM 5.0 with hierarchies."?
What are hierarchies and how do they work? Will they allow us to have multiple limit items on one PO?
Thanks again,
Nick

I've noticed that in the new version of Firefox that you cannot save multiple tabs at one time like the previous Firefox 3.6.or so and I wanted to know if I can find that feature again?

I've noticed that in the new version of Firefox that you cannot save multiple tabs at one time like the previous Firefox 3.6.or so and I wanted to know if I can find that feature again?
In the previous versions of Firefox when you went to you Bookmarks menu it gave you the options to either Bookmark This Page 'command' + 'D', Subscribe to this Page, Bookmark All Tabs 'up-arrow-key' + 'command' + 'D', and Organize Bookmarks 'up-arrow-key' + 'command' + 'B' however in the newest version of Firefox there is no Bookmark All Tabs so you can bookmark all the tabs that you have up in one window at a time. So I need to know if it is possible that the feature is now in a different place, is gone altogether, or if you can get that feature another way?
For me personally and my work I go through hundreds of web pages a day and save around half of those so it is imperative that I be able to bookmark more then one tab at a time because I can't be bothered to bookmark every single page separately and then go through hundreds of tabs in my Unsorted bookmarks in order to sort those bookmarks. It is simple inconvenient to sort every bookmark individually that is why the previous version of Firefox with the Bookmark All Tabs button was superior in its convenience.

Right click any tab and choose "Bookmark All Tabs".

Cannot add multiple members of a failover cluster to a DFSR replication group

Server 2012 RTM. I have two physical servers, in two separate data centers 35 miles apart, with a GbE link over metro fibre between them. Both have a large (10TB+) local RAID storage arrays, but given the physical separation there is no physical shared storage.
The hosts need to be in a Windows failover cluster (WSFC), so that I can run high-availability VMs and SQL Availability Groups across these two hosts for HA and DR. VM and SQL app data storage is using a SOFS (scale out file server) network share on separate
servers.
I need to be able to use DFSR to replicate multi-TB user data file folders between the two local storage arrays on these two hosts for HA and DR. But when I try to add the second server to a DFSR replication group, I get the error:
The specified member is part of a failover cluster that is already a member of the replication group. You cannot add multiple members for the same cluster to a replication group.
I'm not clear why this has to be a restriction. I need to be able to replicate files somehow for HA & DR of the 10TB+ of file storage. I can't use a clustered file server for file storage, as I don't have any shared storage on these two servers. Likewise
I can't run a HA single DFSR target for the same reason (no shared storage) - and in any case, this doesn't solve the problem of replicating files between the two hosts for HA & DR. DFSR is the solution for replicating files storage across servers with
non-shared storage.
Why would there be a restriction against using DFSR between multiple hosts in a cluster, so long as you are not trying to replicate folders in a shared storage target accessible to both hosts (which would obviously be a problem)? So long as you are not replicating
folders in c:\ClusterStorage, there should be no conflict.
Is there a workaround or alternative solution?

Yes, I read that series. But it doesn't address the issue. The article is about making a DFSR target highly available. That won't help me here.
I need to be able to use DFSR to replicate files between two different servers, with those servers being in a WSFC for the purpose of providing other clustered services (Hyper-V, SQL availability groups, etc.). DFSR should not interfere with this, but it
is being blocked between nodes in the same WSFC for a reason that is not clear to me.
This is a valid use case and I can't see an alternative solution in the case where you only have two physical servers. Windows needs to be able to provide HA, DR, and replication of everything - VMs, SQL, and file folders. But it seems that this artificial
barrier is causing us to need to choose either clustered services or DFSR between nodes. But I can't see any rationale to block DFSR between cluster nodes - especially those without shared storage.
Perhaps this blanket block should be changed to a more selective block at the DFSR folder level, not the node level.

How to print multiple pages in single spool in smartforms

Hi all,
I have a issue on to print multiple pages in single spool,i can able to print multiple pages in multiple spool .I am doing Check Print smartforms in that i need to print Multiple pages in single spool.Currently i am using the below code please help to solve this issue.
IF gv_tabix = 1.
lwa_outp_option-tdnewid = 'X'.
ELSE.
lwa_outp_option-tdnewid = ' '.
ENDIF.
Thanks,
Deesanth

Hi
TABLES: spfli.
DATA:
t_spfli type STANDARD TABLE OF spfli.
DATA:
fs_spfli TYPE spfli.
DATA:
w_form TYPE tdsfname,
w_flag TYPE i,
f_nam TYPE rs38l_fnam,
w_input TYPE ssfcompin,
w_control TYPE ssfctrlop.
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
SELECT-OPTIONS s_carrid FOR spfli-carrid.
SELECTION-SCREEN END OF BLOCK blk .
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME.
PARAMETERS:
p_single RADIOBUTTON GROUP rad1,
p_ind RADIOBUTTON GROUP rad1.
SELECTION-SCREEN END OF BLOCK block1.
START-OF-SELECTION.
PERFORM display_data.
PERFORM ssf_function_module_name.
PERFORM spool_request.
*& Form display_data
* text
* --> p1 text
* <-- p2 text
FORM display_data .
SELECT * FROM spfli INTO TABLE t_spfli WHERE carrid IN s_carrid.
ENDFORM. " display_data
*& Form ssf_function_module_name
* text
* --> p1 text
* <-- p2 text
FORM ssf_function_module_name .
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING formname = ' '
IMPORTING fm_name = f_nam
EXCEPTIONS no_form = 1
no_function_module = 2.
* IF sy-subrc NE 0.
* MESSAGE 'Form cannot be displayed' TYPE 'E' .
* ENDIF. " IF sy-subrc eq 0
ENDFORM. " ssf_function_module_name
*& Form spool_request
* text
* --> p1 text
* <-- p2 text
FORM spool_request .
w_input-dialog = 'X'.
CALL FUNCTION 'SSFCOMP_OPEN'
EXPORTING input = w_input
EXCEPTIONS error = 1.
*" LOOP AT t_spfli .....................................................
LOOP AT t_spfli INTO fs_spfli.
w_control-no_open = ' '.
w_control-no_close = ' '.
*"Single spool request..................................................
IF p_single EQ 'X'.
w_control-no_open = 'X'.
w_control-no_close = 'X'.
ELSE.
*"Individual spool request.............................................
IF w_flag NE '1'.
w_control-no_open = 'X'.
w_control-no_close = ' '.
w_flag = 1.
CALL FUNCTION ' '
EXPORTING control_parameters = w_control
fs_spfli = fs_spfli
EXCEPTIONS formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4.
endif. " IF w_flag ne '1'
ENDIF. " IF p_single eq 'X'.
CALL FUNCTION ' '
EXPORTING
control_parameters = w_control
fs_spfli = fs_spfli
EXCEPTIONS formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4.
ENDLOOP. " LOOP at t_spfli into ...
*&This function module close the spool request *
CALL FUNCTION 'SSFCOMP_CLOSE'
EXCEPTIONS error = 1.
ENDFORM. " spool_request
Regards,
Sravanthi

SQL Developer cannot execute multiple queries in one connection

Hi,
Using : SQL Developer 1.2.29.98, Oracle Database 9i on Windows XP.
Currently I have TOAD and PL/SQL Developer to handle things related to Oracle Database.
I found this SQL Developer tools as an interesting tool which might replace PL/SQL Developer (I assume).
I opened two SQL Worksheets and tried to execute 2 queries (time consuming one) simultanously, suddenly it freezes (the window become grayed). Just like TOAD, we cannot smoothly execute multiple queries on single connection on SQL Developer
I can monitor the query process using TOAD (Session Browser) and found both queries are running while SQL Developer window become grayed and seems not functioning. After the queries have been finished, I mean both of them, the SQL Developer window become normal and "alive" again showing the expected results.
Well, however PL/SQL Developer could handle this. Executing multiple queries in single application is just its unbeatable features.
We can view the query result once its finished instead of until the others being processed, by just only switch the SQL Windows.
Is it true that SQL Developer doesn't support executing multiple queries?
Or is it a feature which we should request?
Or we have to activate this feature by doing some changes on configuration / preferences?
(Do we need to open two SQL Developer instances? what a memory consuming solution).
Regards,
Buntoro

SQLDeveloper connections are single threaded and also rather single minded (in that you can't do much else while a long query is running.)
There is an existing feature request http://apex.oracle.com/pls/otn/f?p=42626:39:3685254426061901::NO::P39_ID:4202 for which you can vote.
The workaround is to have multiple connections. Not brilliant but it works.

Sending EDI To Multiple Partners Using Single Send Port in Orchestration

Hi Guys,
I am having a scenario where i am receiving a Xml(which can be in between 11-15). I am having 150 Trading Partners with whom these datsets have to be shared. Now every Trading partner is having there own character Sets and unique numbers so i have created 150
party agreements for all the Trading partners. I am interested to use a single port. I have created an orchestration to achieve this. Below are the steps i used to create orchestration :-
1) Receiving 11 XML from receive shape.
2) Extracting the value of Node TSP(this value is used to know the trading partners unique number on which i am deciding to which party agreement this Xml needs to go) using xpath.
3) I am constructing the message in construct.
3.1) Mapping from XML To EDI.
3.2) As all 11 datasets are having different version. So i am overidding the value ISA and GS in Message Assignment(SourceName).
4) Decide shape to decide on the value of TSP to which port it has to be send.
But according to me this is not an optimized solution. Below are reasons:-
1) I have to create 150 branch into decide shape. As i am receiving 11 different Xml messages i need to create decide shape for all the different Xml messages.
2) I have to create 150 different ports which are having 15 operation(depanding upon Xml we received).
Note:- I have to create 150 different Send Ports only because of Party Agreement. So is there any solution? i only want Single Send port and i can select the party Agreement in the orchestrations.

Duplicate thread. See:
http://social.msdn.microsoft.com/Forums/en-US/c12a377e-ccf6-4fbe-9986-14da63d72282/sending-edi-to-multiple-partners-using-single-send-port-in-orchestration?forum=biztalkgeneral

Cannot synch multiple contact or calendar folders; no way to recognize folders with names other than contact or calendar

cannot synch multiple contact or calendar folders from computer using outlook. iPhone seems to recognize only single title of contacts or calendar

iPhone PC Suite may be helpful. It allows you to import contacts from vCard files, Outlook Express, Windows Address Book, Windows Live Mail and Outlook 2003/2007/2010/2013 to iPhone directly.

Multiple qualifications for single personal number

Hi
I have data source i am getting Pernr is character and qualification is attribute ( as text) . now i want to see multi ple qualification for single pernr.
so i can open Pernr and open attribute qualification and giving compounding as pernr?
will be the solution

Hi Suneel,
Definitely u cannot maintain multiple attributes for different qualifications.Question for you does any employee have multiple qualifications at same time- Say Employee 1000 can do BSc and BE at the same time?.If this is the case, then you need to do compounding .If not, Make qualification as time dependent and system will not treat multiple qualifications of an employee as duplicate records.
Eg: Employee Qualification StartDate EndDate
1000 BE 01.01.2004 31.12.2008
1000 MBA 05.01.2009 31.12.2009
System will accept multiple qualifications while loading even without compounding and the same can be displayed in report.Hoep this helps!
Regards
Chandu

Multiple deliveries into single invoice

Gurus,
My business requirement is like this,
Order is created and delivery process is done with PGI,but the material moves with manual invoice/DC,but the end of the week,all deliveries are compiled into a single invoice for particular customer.Wheares the header condition,business item remains same.When i tried to put all deliveries for the customer X in vf01 and execute,the individual deliveries cannot be convereted into into single invoice.When split analysis is done it says header is different,but to my knowledge all header ,business items are unique.Kindly help me at this ase

- Try using Tcode VF04. Opt for delivery related billing active.
- Select the desired delivery in Billing due list. (Press Ctrl Key from keyboard to select multiple lines).
- Then you have 2 option
1. To click on Collective Billing button to do a collective invoice for the selected delv doc.
2. To analysis whether you will be able to a collective billing or not. To analysis that
- click on simulation button.
- Billing Doc Simulate: Billing Doc Overview Screen
- Select all lines.
- There first go for Logs, by pressing Log button.
- Then click on Split Analysis button to get split analysis.
- If you find any split reason and modify/adjust your copying control accordingly to do combine billing
- Finally, click on Collective Billing button to do a collective invoice for the selected delv doc.
Regards
JP

Scanning multiple pages into single document

Is there a way to scan multiple pages into single document? I am using the following: HP pavilion laptop with windows 8, HP photosmart C6380 all in one printer scanner copier.

Hi,
Please try
Double click printer icon on desktop,
Select Scan a Document or Photo,
Put the first page on the glass (face down),
Check options (size, dpi ...), and select Scan document to file,
Click Scan - machine will scan the first page
Remove the first page on the glass, put the second page,
Click + (plus sign) It sits on the left hand side of a red x
Machine will scan the second page, put 3rd page on the glass and click + again ..... to the end then click Save
Click Done after Save
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problem in Loading Multiple image in Single Sprite/MovieClip

Hi All,
I am having a killing problem in loading multiple images in single movie clip/sprite using a separate class.
Here is the ImageLoader.as class
package com.project.utils{
    import com.project.*;
    import com.project.utils.*;
    import flash.events.EventDispatcher;
    import flash.display.MovieClip;
    import flash.events.Event;
    import flash.events.ProgressEvent;
    import flash.display.Loader;
    import flash.events.IOErrorEvent;
    import flash.net.URLLoader;
    import flash.events.MouseEvent;
    import flash.net.URLRequest;
    import flash.display.Bitmap;
    public class ImageLoader extends EventDispatcher {
        public var imgloader:Loader;
        public var imgMc:MovieClip;
        public var imgObject:Object;
        public var loaded:Number;
        public function ImageLoader():void {
            imgMc = new MovieClip();
            imgObject = new Object();
            imgloader = new Loader();
        public function loadImage(imgHolder:MovieClip, imgObj:Object):void {
            imgMc = new MovieClip();
            imgObject = new Object();
            imgloader = new Loader();
            imgMc = imgHolder;
            imgObject = imgObj;
            imgloader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoad);
            imgloader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onImgLoadProgress);
            imgloader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR,onImageLoadFailed);
            imgloader.load(new URLRequest(imgObj.FilePath));
        private function onImgLoad(Evt:Event):void {
            var image:Bitmap = Bitmap(Evt.target.content);
            try {
                imgMc.removeChildAt(0);
            } catch (error:Error) {
            imgMc.addChild(image);
            try {
                if (imgObject.URL != undefined) {
                    imgMc.buttonMode = true;
                    imgMc.removeEventListener(MouseEvent.CLICK, onImageClicked);
                    imgMc.addEventListener(MouseEvent.CLICK, onImageClicked);
            } catch (err:Error) {
            dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD"));
        private function onImageClicked(evt:MouseEvent):void {
            trace("Image Attrs:"+imgObject.URL +" Target "+imgObject.Target);
        private function onImgLoadProgress(Evt:ProgressEvent):void {
            if (Evt.bytesLoaded>0) {
                loaded = Math.floor((Evt.bytesLoaded*100)/Evt.bytesTotal);
                dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_PROC",loaded));
        private function onImageLoadFailed(Evt:IOErrorEvent):void {
            trace("Image Loading Failed");
            dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_FAIL"));
Here I am loading some images using the above class in a for loop, like
            for (var i=0; i < 3; i++) {
                //imgLoader=new ImageLoader;
                imgLoader.addEventListener("CustomEvent.ON_IMGE_LOAD",onImageLoad);
                var target:MovieClip=videolist_mc["list" + mcCount + "_mc"];
                target.list_mc.visible=false;
                var imgObj:Object=new Object;
                imgObj.FilePath=list[i].Thumbnail;
                imgObj.Url=list[i].Url;
                imgObj.Target=list[i].Target;
                target.list_mc.urlObj=new Object ;
                target.list_mc.urlObj=imgObj;
                imgLoader.loadImage(target.list_mc.imgholder_mc,imgObj);
                target.list_mc.lable_txt.htmlText="<b>" + list[i].Label + "</b>";
                target.list_mc.imgholder_mc.buttonMode=true;
                target.list_mc.imgholder_mc.addEventListener(MouseEvent.CLICK,onItemPressed);
                mcCount++;
In this case, the ImageLoader.as works only on the last movie clip from the for loop. For example, if i am trying to load three image in three movie clips namely img_mc1,img_mc2 and img_mc3 using the for loop and ImageLoader.as, I am getting the image loaded in the third movie clip only img_mc.
See at the same time, If i uncomment onething in the for loop that is
//imgLoader=new ImageLoader;
its working like a charm. But I know creating class objects in a for loop is not a good idea and also its causes some other problems in my application.
So, help to get rid out of this problem.
Thanks
-Varun

package com.project.utils{
    import com.project.*;
    import com.project.utils.*;
    import flash.events.EventDispatcher;
    import flash.display.MovieClip;
    import flash.events.Event;
    import flash.events.ProgressEvent;
    import flash.display.Loader;
    import flash.events.IOErrorEvent;
    import flash.net.URLLoader;
    import flash.events.MouseEvent;
    import flash.net.URLRequest;
    import flash.display.Bitmap;
    public class ImageLoader extends EventDispatcher {
        public var imgloader:Loader;
        public var imgMc:MovieClip;
        public var imgObject:Object;
        public var loaded:Number;
        public function ImageLoader():void {
// better add you movieclip to the stage if you want to view anything added to it.
            imgMc = new MovieClip();
            imgObject = new Object();
            imgloader = new Loader();
        public function loadImage(filepath:String):void {
            imgloader.contentLoaderInfo.addEventListener(Event.COMPLETE,onImgLoad);
            imgloader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,onImgLoadPr ogress);
            imgloader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR,onImageLoadF ailed);
            imgloader.load(new URLRequest(filepath));
        private function onImgLoad(Evt:Event):void {
            var image:Bitmap = Bitmap(Evt.target.content);
            try {
                imgMc.removeChildAt(0);
            } catch (error:Error) {
            imgMc.addChild(image);
            try {
                if (imgObject.URL != undefined) {
                    imgMc.buttonMode = true;
                    imgMc.removeEventListener(MouseEvent.CLICK, onImageClicked);
                    imgMc.addEventListener(MouseEvent.CLICK, onImageClicked);
            } catch (err:Error) {
            dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD"));
        private function onImageClicked(evt:MouseEvent):void {
            trace("Image Attrs:"+imgObject.URL +" Target "+imgObject.Target);
        private function onImgLoadProgress(Evt:ProgressEvent):void {
            if (Evt.bytesLoaded>0) {
                loaded = Math.floor((Evt.bytesLoaded*100)/Evt.bytesTotal);
                dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_PROC",loaded));
        private function onImageLoadFailed(Evt:IOErrorEvent):void {
            trace("Image Loading Failed");
            dispatchEvent(new CustomEvent("CustomEvent.ON_IMGE_LOAD_FAIL"));
Here I am loading some images using the above class in a for loop, like
            for (var i=0; i < 3; i++) {
                var imgLoader:ImageLoader=new ImageLoader();
                imgLoader.addEventListener("CustomEvent.ON_IMGE_LOAD",onImageLoad);
                var target:MovieClip=videolist_mc["list" + mcCount + "_mc"];
                target.list_mc.visible=false;
                var imgObj:Object=new Object;
                imgObj.FilePath=list[i].Thumbnail;
                imgObj.Url=list[i].Url;
                imgObj.Target=list[i].Target;
                target.list_mc.urlObj=new Object ;
                target.list_mc.urlObj=imgObj;
                imgLoader.loadImage(pass the image file's path/name);
                target.list_mc.lable_txt.htmlText="<b>" + list[i].Label + "</b>";
                target.list_mc.imgholder_mc.buttonMode=true;
                target.list_mc.imgholder_mc.addEventListener(MouseEvent.CLICK,onItemPressed);
                mcCount++;

WDS 2012 R2 - Cannot PXE multiple clients at the same time

Hello All,
This is my first post on here so I apologize if this is the wrong place. I work for a school district and we are implementing WDS 2012 R2. We've been extremely satisfied with the speeds and ease of use through unattend files. However, for
the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
So here's the problem:
I have a stand alone WDS server which is not a domain controller and is not our DHCP server. I have IP helpers and broadcast forwarders setup on the network. As well as option 66 and 67 in DHCP. So far so good right!
Well that's partially right. When we boot one client at a time to the WDS server. Everything works as intended. We can TFTP the necessary files from the WDS server. Everything boots up and we're off and running.
However, if we boot up two or more clients at the same time. The WDS server never responds to the traffic. The clients get their DHCP information. They start the referral and download from the WDS server, but get no response. I'm
really hoping that someone on here would have some insight of something I can try. I've about exhausted my list of peers and contacts. They're all stumped as well and were smart enough to stay with 2008 WDS.
I would prefer to stick with 2012 R2 since it's setup and working for the most part. With only this one hiccup.
Thanks in advance for any guidance!

Hello Daniel,
I appreciate the reply and apologize for taking so long to get back to this. Things have been a little hectic over here.
I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
Multicast is enabled on the server, and it works for the clients. However, as stated in the original post. I cannot boot multiple machines at the same time. I can start them from the image selection screen around the same time though. So,
that appears to be working fine.

Is there a way to create multiple map tile layers at once?

Hello experts,
I have a small problem. It's mainly a matter of saving some time. I need to create 51 map tile layers in mapviewer, and I would like to this this at one time. I can go to the admin console-->Management-->Manage Map Tile Layers-->Create, and then I can create one at a time. But it really would be nice to create them all at once!
I tried using the XML mode interface, and I can use the following code to create one map tile layer:
<?xml version="1.0" standalone="yes"?>
<map_tile_server_admin_request>
<create_map_tile_layer data_source="xxxx">
    <map_tile_layer
        name="FOUNDATION"
        http_header_expires="168"
        image_format="PNG">
      <internal_map_source base_map="FOUNDATION"/>
      <tile_storage root_path="/scratch/tilecache" />
      <coordinate_system
          srid="8265"
          minX="-180" maxX="180" minY="-90" maxY="90"/>
      <tile_image width="250" height="250" />
      <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
      </zoom_levels>
    </map_tile_layer>
</create_map_tile_layer>
</map_tile_server_admin_request> And it creates one layer. But when I try this:
<?xml version="1.0" standalone="yes"?>
<map_tile_server_admin_request>
<create_map_tile_layer data_source="xxxx">
    <map_tile_layer
        name="FOUNDATION"
        http_header_expires="168"
        image_format="PNG">
      <internal_map_source base_map="FOUNDATION"/>
      <tile_storage root_path="/scratch/tilecache" />
      <coordinate_system
          srid="8265"
          minX="-180" maxX="180" minY="-90" maxY="90"/>
      <tile_image width="250" height="250" />
      <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
      </zoom_levels>
    </map_tile_layer>
</create_map_tile_layer>
<create_map_tile_layer data_source="xxxx">
    <map_tile_layer
        name="FOUNDATION_WY"
        http_header_expires="168"
        image_format="PNG">
      <internal_map_source base_map="FOUNDATION_WY"/>
      <tile_storage root_path="/scratch/tilecache" />
      <coordinate_system
          srid="8265"
          minX="-180" maxX="180" minY="-90" maxY="90"/>
      <tile_image width="250" height="250" />
      <zoom_levels levels="10" min_scale="5000" max_scale="10000000">
      </zoom_levels>
    </map_tile_layer>
</create_map_tile_layer>
</map_tile_server_admin_request>...it creates only the first map tile layer in my xml request.
Is there any way to create multiple map tile layers at once?
Thank you!
John

Michael,
It looks like you are right! Thank you for your help.
I still have a small concern. I looked at the documentation and it reads,
"The configuration settings for a cache instance are stored in the USER_SDO_CACHED_MAPS metadata view. You should normally not manipulate this view directly, but should instead use the MapViewer administration tool, which uses this view to configure map cache instances."
But, I tried inserting records into USER_SDO_CACHED_MAPS and it works, and I can't really see any reason not to directly insert records into this table, so...
Perhaps that warning is there simply because potentially you could screw things up tinkering with the table directly.
Cheers!
John

Cannot MESH Multiple MAPs to Single RAP

Similar Messages

Maybe you are looking for