Cannot migrate VM in VMM but can in Failover Cluster Manager network adapters network optimization warning

I have a 4 node Server 2012 R2 Hyper-V Cluster and manage it with VMM 2012 R2. I just upgraded the cluster from 2012 RTM to 2012 R2 last week which meant pulling 2 nodes out of the existing cluster, creating the new R2 cluster, running the copy
cluster roles wizard since the VHDs are stored on CSVs, and then added the other 2 nodes after installing R2 on them, back into the cluster. After upgrading the cluster I am unable to migrate some VMs from one node to another. When trying to do
a live migration, I get the following notifications under the Rating Explanation tab:
Warning: There currently are not network adapters with network optimization available on host Node7.
Error: Configuration issues related to the virtual machine VM1 prevent deployment and must be resolved before deployment can continue.
I get this error for 3 out of the 4 nodes in the cluster. I do not get this error for Node10 and I can live migrate to that node in VMM. It has a green check for Network optimization. The others do not. These errors only affect
VMM. In the Failover Cluster Manager, I can live migrate any VM to any node in the cluster without any issues. In the old 2012 RTM cluster I used to get the warning but I could still migrate the VMs anywhere I wanted to. I've checked the network
adapter settings in VMM on VM1 and they are the same as VM2 which can migrate to any host in VMM. I then checked the network adapter settings of the VMs from the Failover Cluster Manager and VM1 under Hardware Acceleration has "Enable virtual machine
queue" and Enable IPsec task offloading" checked. I unchecked those 2 boxes refreshed the VMs, refreshed the cluster, rebooted the VM and refreshed again but I still could not live migrate VM1. Why is this an issue now but it wasn't before
running on the new cluster? How do I resolve the issue? VMM is useless if I can't migrate all my VMs with it.

I checked the settings on the physical nics on each node and here is what I found:
Node7: Virtual machine queue is not listed (Cannot live migrate problem VM's to this node in VMM)
Node8: Virtual machine queue is not listed (Cannot live migrate problem VM's to this node in VMM)
Node9: Virtual machine queue is listed and enabled (Cannot live migrate problem VM's to this node in VMM)Node10: Virtual machine queue is listed and enabled (Live Migration works on all VMs in VMM)
From Hyper-V or the Failover Cluster manager I can see in the network adapter settings of the VMs under Hardware Acceleration that these two settings are checked "Enable virtual machine queue" and Enable IPsec task offloading". I unchecked those
2 boxes, refreshed the VMs, refreshed the cluster, rebooted the VM and refreshed again but I still cannot live migrate the problem VMs.
It seems to me that if I could adjust those VM settings from VMM that it might fix the problem. Why isn't that an option to do so in VMM?
Do I have to rebuild the VMM server with a new DB and then before adding the Hyper-V cluster uncheck those two settings on the VM's from Hyper-V manager? That would be a lot of unnecessary work but I don't know what else to do at this point.

Similar Messages

I cannot log in my account but can as a guest even after removing the password

i cannot log in my account but can as a guest even after removing the password

Hi Kabiru,
Thanks for visiting Apple Support Communities.
You may want to use the steps in this article to reset your user account password:
OS X: Changing or resetting an account password
http://support.apple.com/kb/HT1274
Best,
Jeremy

TS3899 recently changed ISP, now cannot send emails on iPad but can receive them, help

recently changed ISP, now cannot send emails on iPad but can receive them

Make sure that your username and password are set in the outgoing mail servers setting.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

Can't add VM to Failover Cluster Manager

I have two VMs: a virtual DC and a virtual SCVMM. I opened up a Failover Cluster Manager and tried to add both machines. The DC added successfully but I can't get the SCVMM to add.
The error is:
"There was a failure configuring the virtual machine role for '<my_machine_name>'
The RASD '\\<cluster>\\root\virtualization\V2:Msvm_ResourceAllocationSettingData.InstanceID="Microsoft:BBA1664E-07AB-41FA-B3B4-DBA795117449\\663F3FFA-8784-4E92-9A9B-99FC3D705BAC\\0\\0\\D" is not a valid disk type."
I have no idea what this error is trying to tell me...any help would be greatly appreciated!

Thank you for your response.
I double-checked and the VM is located on the shared cluster container. I went into Hyper-V Manager and looked at the paths and both the virtual machine and virtual hard disks are in the cluster container.
I have two VM XML files in the cluster container which I've noted with their GUIDs. For a sanity check, I also went into the specific host and navigated to C:\ProgramData\Microsoft\Windows\Hyper-V\Virtual Machines and found that the same XML files
there too. Should those be there? They are both there so I don't see why I could add the virtual DC but not my virtual SCVMM.

I can't find failover cluster management after creating hyper-v cluster on SCVMM 2012 R2

I've created a hyper-v cluster on scvmm 2012 r2 but I can't find the failover cluster manager to move storage resources. all hosts are showing to have hyperv role and failover clustering feature installed. disk Witness in Quorum is good, same as for the
other CSV lun. Please help me Microsoft. Thank you.

The management consoles are not getting installed while building the cluster through SCVMM. However, its not mandatory to have the management tools on the server. You can have it on a different machine with this management tools installed and connect to
this cluster remotely.
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.com

Cannot send mails via IMAP but can receive mails

HI All
Having Exchange 2010 SP2 on standalone box on W2K8R2-std sp1
We enabled IMAP and POP3 for our user base who do not have Outlook or are facing issues with active sync.
mailbox gets configured however none of mails are sent via IMAP they remain stuck in user outbox only.
They can receive mails but can't send. we tried configuring same users on Outlook and activesync and it worked.
We were surprised with some mis-configuration at IMAP end but could't get to root of it. Any idea what could be an issue????
for imap testing we tried Zimbra 7.2.3 on windows 7 pro, Windows Mail app in windows 8.1. IMAP in windows phone 8
Have enabled IMAP and pop3 logging but couldn't interpret it.
Cheers VP

Hi vp89,
Based on my knowledge, POP3 and IMAP cannot be used to send messages.
E-mail applications that use POP3 and IMAP4 to send messages rely on the SMTP protocol to send messages.
The connector for receiving e-mail submissions from client applications that use POP3 or IMAP4 is created automatically on every Hub Transport server.
We need a Send Connector.
More details in the following articles:
Understanding POP3 and IMAP4
http://technet.microsoft.com/en-us/library/bb124107(v=exchg.141).aspx
Create an SMTP Send Connector
http://technet.microsoft.com/en-us/library/aa997285(v=exchg.141).aspx
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Networked Computer Cannot Write to Remote Device, but Can Read and Delete

I am troubleshooting a Mac on OS X 10.4.11 that is having troubling file sharing with a file server also running OS X 10.4.11. The computer cannot write to the file server, but can read files, create blank files, and even delete files.
I have a small network that typically includes 5-7 Macs running various versions of OS X and several Windows PCs of various types. All computers on the network have access to a pair of external drives by way of a networked iMac running OS X 10.4.11 with File Sharing and Windows File Sharing enabled.
One of the Macs on the network (also running 10.4.11) is experiencing assorted permissions issues with one user. When attempting to save files to the external drives or file server desktop via AFP, this user account will receive an error to the effect that they do not have sufficient privileges to do so. However, a stub file will be created on the remote machine (an 8K file of the same name and type, but having no content). The user can read files but not save changes. However, they can delete files. Further, this user receives notices that they do not permission to add files to user drop boxes hosted on the same machine.
Interestingly, when connected via AFP to a machine running 10.5.8, this user can read and write files normally.
A new user account was ceated on the affected machine. This accounts functions normally.
Windows File Sharing is enabled on the affected machine, however disabling seems to have no effect.
Permisisons have been repaired via Disk Utility.
Permissions for all files on external drives have been set to 777.
No other devices or users on network are known to have experienced any problems.

Very strange, long shut, but In Finder, select Go menu>Go to Folder, and go to "/volumes".
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.

I don't see my question posted. Email issues. Cannot receive emails on Mac, but can on Iphone

Please help me with email: Not receiving, but can send. Urgent! Or who do I call?

Open Mail
On the Menubar click Window and then from the dropdown menu
click Connection Doctor. Check wheather all the dots are green.
If any one of them is not green, either contact ISP or mail service provider.

I am trying to restore a backed up profile after re-installing my op sys (windows 8.1) but can't access profile manager i am using tbird 17.0.8 can anyone help

because of corrupted files I had to re-install windows 8.1. before reinstalling I backed up my thunderbird profile, I now want to restore that profile but can't find how to access the profile manager, Can anyone help please? I have downloaded Thunderbird 17.0.8

Press the Windows key and R, then type thunderbird.exe -p
http://kb.mozillazine.org/Moving_your_profile_folder_-_Thunderbird

Lost all my network adapters - network icon is X'ed out but still online

Win7 x64 - little backstory to explain how i got here...
This was a vista machine that i upgraded to win7. Everything worked after the upgrade except for hamachi (version 1). I did a reinstall of that and it fixed it, except i had 2 hamachi network interfaces listed in device manager, one of which was showing up as broken (yellow exclamation mark). Since everything was working i left it alone.
Fast forward to today - i tried to upgrade hamachi to hamachi 2. Seemed to work ok but i couldn't connect to any peers. Looking into it it said the hamachi adapter was faulty and looking at my network connections there was no hamachi adapter listed.
I opened device manager and there was just one hamachi nic listed and it was the broken one. I selected uninstall - checked the box to remove the driver and it uninstalled.
I then manually installed another instance of the hamachi network adapter. Hamachi still cant connect to peers - same error msg about the network adapter.
Only now, ALL of my network adapters are missing in the network connections folder. And the network status icon in the status tray is showing a red X as though it's not connected, even though this PC is online (i'm connecting to it through RDP).
I've already tried rebooting - no effect. So any ideas where all my network connections/adapters went and how to get this all sorted?
One more piece of info - if i right click on the network icon in the status tray and select troubleshoot, having another problem, specific adapter - on that screen it then lists 3 network adapters. Tried letting it diagnose all of them but no effect.
And if i open the network connections folder and go to help, advanced options, i get an 'unexpected error'

Hi,
This issue can occur by incompatible NIC driver or corrupted files. I suggest you try the following steps.
1. Uninstall the NIC driver and reinstall the driver for Windows Vista or Windows 7 in Compatibility Mode.
2. Restart the computer in Safe Mode with Networking and check the result.
If there is any error message, please capture and upload it for research.
Thanks,
Novak

Can't get any Local Storage to add in Failover Cluster Manager

I don't believe that HyperV allows straight local disks to be added to a failover cluster. How are you sharing the disks between the nodes? Have you used Storage Spaces Direct or Starwind or HP VSA? You need to add the drives at those levels, you can't do it at the raw local level.

Hey All! Been stuck on this awhlie so I was going to see if the community could help.I have a Lab at the house that has 4 Servers running Server 2012r2 out of these I have 2 "High Power" Servers and 2 "Low Power" Servers. What I'm trying to do is cluster them together so that I can have Hyper V VMs fail-over (Best case being they keep failing over to the next available server. Minimum being the High servers fail into each other and the low fail into each other) but I can't get and disks to add! Every time I add them they're either Offline or Failed as a Status with the Failed one having it's local host being the Owner node and the Offline one having a non local host as it's owner node.If I try to bring the disks online I get:Failed disk: Incorrect Function, 0x80070001Offline Disk: Clustered storage is not connected to the node,...
This topic first appeared in the Spiceworks Community

Exch2k10 - after migration from Exch2k7 - only one mailbox cannot receive (ext/int) emails but can send

Hi,
after migration (coexistence) from Exch2k7, we have only one user (among 160) who cannot receive emails, doesn´t matter if it´s comming from internal user or external and also doesn´t matter if we are checking that mailbox using MS Outlook or OWA interface;
right now I performed a test to redirect (message mailflow) its mailbox to another and it works; I tried to redirect and also save a copy to himself but no success. After disable that redirection, the issue remains the same.
If we use another mailbox with Ms Outlook to send new mail and set the notification for delivery/read; we receive an alert regarding the 'delivery' only.
Using MessageTracking CMDLET to .CSV file, shows the following - when send externally to this user/mailbox:
SMTP ; RECEIVE
STOREDRIVER ; DELIVER
If we use the CMDLET 'Get-Mailbox -Identity "Exchange2010User" | FL' for this user and to another working fine, there is no differences.
That mailbox resides on a database with more 15 others users and using the CMDLET 'get-queue |where-object {$_.NextHopDomain -like "mbx2"}' show no messages waint for delivery.
>>> Can someone help us to troubleshoot this case? Any help is appreciated.

did you check if you have anything like a retention policy or managed folder mailbox policy set for the problem mailbox ?
Journal Rules ?
Outlook Client/Server Side rules ?
did you check if you are able to locate emails in Recover Deleted Items after you logon to user mailbox ?
Please check above and revert back with a reply!
Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
question. ~~ This Information is provided is "AS IS" and confers NO Rights!!

User cannot access redirected Documents folder, but can connect to share in Windows Explorer and access folder on server

I am in the final stages of a cross-forest migration. Users have Windows 7 workstations with redirected folders on a Windows Server 2012 box running in the old forest. User accounts were not migrated. The accounts in use have always
been in the "new" forest. One of our challenges was the large volume of data in redirected folders. I made sure users in the target forest had continued to have access to their redirected folders in the old forest and robocopied
the entire users share, copying the permissions with the files. By doing incremental robocopies, we can get a final copy done now in about six hours. The plan was simple: copy the files, do an incremental copy every night, on the night of the cutover
change the folder redirection policy Documents path from
\\oldserver\users\%USERNAME% to
\\newserver\users\%USERNAME%. The policy is configured to NOT copy user files from the existing folder to the new redirected folder. Everything was going well until I tested the policy change. After the folder redirection policy is updated
and applied, the user cannot access the private Documents folder. For example, user Chester Tester logs on as ctester. I open Windows Explorer and click the Documents shortcut. I see one subfolder, which is subfolder of Public Documents.
So I can look at Public Documents but when I click on the Documents folder (Under the Documents library link) I get an access denied error. Now for the kicker, if I open another Windows Explorer window and edit the address bar to
\\newserver\users\ctester, I can navigate the Documents folder tree and see my thousands of documents. What the ....?
I'm hoping this is something really simple to fix!
TIA

HI Vivian,
Thank you for your reply. Yes, the path in Group Policy Folder Redirection Root Path was updated to
\\NEWSERVER\users. I had planned to point this to the distributed file system, so the first used was actually
\\domain\dfs\users. To simplify things I have backed off to copying to just a normal share
\\newserver\users.
We are using BASIC folder redirection and we create a folder for each user under the root path.
We did not want the policy to move content, as we were seeing users requiring 15-20 minute logon times (or higher) after the policy is changed.
Grant the User exclusive right to Documents - Disabled
Move the contents of Documents to the new location - Disabled
Related folder settings
Video - Follow Documents
Music - Follow Documents
Pictures - Follow Documents
Now when I change the folder redirection from old server to new server I now have TWO My Documents folders in the user's redirection folder on the server. The redirected Documents points to an empty folder set. The copied folders with all user
data are there, but folder redirection refuses to recognize the original folder.
I am looking at the full view of the folder, nothing hidden, so I'm wondering how a folder can have two subfolders with the exact same name. For now, I just want the redirection to move from the old server to the new server properly. I deleted
the new My Documents folder, rebooted the user's workstation and tried again. The behavior repeats itself, i.e., a new My Documents folder is always created when the redirection policy is changed from the old server to the new server. The environment
has about 1500 users with approximately 1.3TB of data in the redirected Documents folders. OUCH!

Messaging Server cannot send email to gmail but can send email to yahoo

I'm using Messaging server 7.0. My company's domain is {color:#ff0000}*sun-vietnam.com*{color} and the email server name is {color:#ff0000}*mail.sun-vietnam.com*{color}, this name is {color:#ff0000}*registered and resolved*{color} correctly in the DNS server of the ISP.
When using an email account form this domain, I can send email to an email address from {color:#ff0000}*yahoo.com*{color} such as {color:#ff0000}****@yahoo.com*{color} and the {color:#ff0000}****@yahoo.com*{color} account can receives this email immediately.
But when I try to send an email address to an email address from {color:#ff0000}*gmail.com*{color} such as {color:#ff0000}****@gmail.com*{color}, the email succesfully sent without no error notified, however the {color:#ff0000}****@gmail.com*{color} account cannot receives this email although I waited for serveral days.
If anyone know the solution to fix this problem, please help me, thanks all of you very much.
Edited by: chuotbeo on Feb 15, 2009 7:26 PM

Hi Shane.
I'm so sorry, the administrator in my company didn't provide enough information for me.
Actually, when I sent email to ***@gmail.com, there was a notification sent to me by the system. The error notification is :
"*{color:#ff0000}Subject: Delivery Notification: Delivery has been delayed Return-path: <[email protected]> {color}*
Received: from tcp-daemon.mail.sun-vietnam.com by mail.sun-vietnam.com
(Sun Java(tm) System Messaging Server 7.0-0.04 64bit (built Jun 20 2008))
id <[email protected]>;
Sat, 14 Feb 2009 00:30:02 +0700 (ICT)
Received: from Mali ([118.71.41.126]) by mail.sun-vietnam.com
(Sun Java(tm) System Messaging Server 7.0-0.04 64bit (built Jun 20 2008)) with ESMTPA
id <[email protected]> for [email protected]; Wed, 11 Feb 2009 14:21:39 +0700 (ICT) "
Have you ever seen this error notification, please help me. Thank you anyway :)
Best regards,

TS3297 I cannot d/l Daily Show but can d/l podcasts. I paid for Daily Show. Showing 'cannot connect' - well the radio works and the podcasts work, y not downloading paid shows?

Why can I not get downloads of paid Daily Show? Am getting 'cannot connect to internet', but I am getting my podcasts downloaded and the radio works! Everything else on my computer is conected. Appple is making me blow smoke out my ears. It's bad enough that they are so slow now they take my money!

Why can I not get downloads of paid Daily Show? Am getting 'cannot connect to internet', but I am getting my podcasts downloaded and the radio works! Everything else on my computer is conected. Appple is making me blow smoke out my ears. It's bad enough that they are so slow now they take my money!

Cannot migrate VM in VMM but can in Failover Cluster Manager network adapters network optimization warning

Similar Messages

Maybe you are looking for