Cannot Minimize Window LVPostMessage not found

I want to start a executable minimized. I have downloaded lvwutil32.zip, but when I try to use MinWin, I get the error Call Library Function Node 'LVPostMessage' : library not found or failed to load.
I am running LV 7.1
Any ideas?
Richard

R Hibbert wrote:
> Sorry. I get the error when I drop the icon on the diagram, not
> at run time. I cannot even get that far!
There must be a problem with the lvwutil32.dll file somehow. There are
several versions of this DLL floating around so maybe check that you
have a recent version.
> Although this article is entitled "How to Maximize", it also covers minimize.
> The only problem is that it executes the minimize by changing the window
> size which isn't quite correct, because restore won't work properly.
> I seem to remember that there is a "Run Minimized" setting under VI
> Properties... but I would rather have different properties in development
> and execution environments.
If you have LabVIEW 7.0 or better you can use the VI Property "Front
Panel->State" to change the current state of the VI anytime during your
program.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

Cannot Sync, Required file not found!

Plz help. I just updated itunes and now when i plug in my ipod, it wont sync,it says, "The ipod "name withheld's ipod" cannot sync. required file not found."

It's possible that the iPod Photo Cache folder on your computer, which is created from syncing photos to your iPod, is interfering with the syncing.
Try deleting the folder from your computer. See this for details:
Photo Sync creates iPod photo Cache
Then, try resyncing your iPod with your computer, and see if it is sucessful or not.
-Kylene

IPod Classic 120GB cannot sync, "Required disk not found"

Somebody, please help! iPod Classic 120GB charcoal, current OS as of about a week ago (won't stay synced long enough for me to see what it is), iMac 24" 10.6.4, iTunes 10.0.1. Let me know if you need any more info and I'll try to provide it.
Everything was absolutely fine until I updated to the newest version of iTunes. Now, when I plug in my iPod, it says it's connecting then jumps straight to the "Okay to disconnect" screen. It never shows up in iTunes at all. After doing this repeatedly, I unplugged it then immediately plugged it in again before it had finished the progress bar on the "Okay to disconnect" screen, and it finally showed up in iTunes, but it gave me an error of "iPod was not properly disconnected" then "cannot sync - required disk not found" and disconnected itself again.
I tried resetting it (menu+center buttons) while it was plugged in, and this did nothing. iTunes still didn't recognize it at all.
About a week ago, I followed some instructions somewhere and toggled the "enable disk use" option (I usually keep it unchecked) then was able to restore it. The songs were added back in a bizarre order (not alphabetical, not chronological, songs within an album added out of order, jumping from artist to artist, etc.) and I had to sync it again for three random albums that it missed the first time, but once everything was in again it was fine. I haven't added any new songs or playlists to my iTunes library since then (just changed a few ratings and I like to keep track of play counts), but when I tried to sync it again this morning, I got exactly the same errors.
The only difference this time is that it alerted me that one song in my library (a song I happen to like very much) could not be synced. The song still shows up on my iPod, but will not play. It still appears and plays in iTunes on the computer.
The iPod works perfectly in day-to-day use and is a little over a year old. I take very good care of it (my previous iPod is four or five years old and still works fine) and it has never had any problems before this. It has almost 100GB worth of music (no other media, just music), which makes it pretty annoying to have to restore it more than absolutely necessary. What is going on here and is there some way to fix it that will last longer than a week?

Hi, yeah I'm experiencing the same issue as everyone else with a 120gb iPod classic using iTunes 10.1.1 (4). Started about the time of OSX 10.6.5 update and hasn't been resolved with the OSX 10.6.6 update.
iPod attempts to Sync but now quits without even appearing on the computer let alone iTunes.
I have ESET security but quitting the app doesn't help.
I also have an iPhone 3Gs and that's still syncing fine (thank heavens), via a different library.
I've since managed to wipe the iPod clean (back to factory settings) as forced to do so by following the instructions in another post to remove the iPod Photo Cache. I then moved my iTunes folder to another directory for safe keeping.
I set up a clean iTunes database thinking my old one might have been corrupted. To do this you open iTunes from scratch while holding down the option key and select "Create Library". iTunes then remembers the last library created whenever you open the app.
When I am able to see the iPod summary screen (a rare occurrence now) I see that "enable disk use" is checked ok - this has been noted as a problem in previous forums. So that's not the issue.
Actually the iPod doesn't even stay connected to my 2010 unibody MacBook Pro when the iPod is switched over to disc mode. It immediately goes into "OK to Disconnect".
So I now have a clean iPod, and clean iTunes - all empty and essentially useless!
Anybody out there with any ideas? Plllleeeeeeeese?

My iPad2 cannot synchronize with iPhoto on my Mac, error message "...cannot synchronize. File not found"

Have upgraded my iPad to an iPad 2. When synchronizing with my iPhoto Library (8500 photos) on my MacBook I get an error message saying "...cannot synchronize. File not found" (transalted from swedish). It works well with my iPad. I restored the iPad2 tand began from scratch but the problem reocurred.

i have similar problem too. it seems the problem is from iphoto 08.
i have two ipad 2-
ipad A:
new ipad with new sync with 6 photo album with iphoto, error occurred.
restored iOS to 4.3.3, problem still exist.
ipad B:
synced 6 photo album with iphoto no problem for a long time.
tried to de-select album 1 and synced, no problem...
then re-select album 1 and synced, error message occurred.
my solution:
copy album 1's photo to desktop, then copy the desktop photo back to iphoto album folder...after that, i can sync back album 1 to my ipad.
i have no idea why iphoto has such problem on some of my photo albums =(
Do anyone have a more clever solution?

Cannot Play Disc Folder Not Found

I created a project in DVD Studio Pro 3 and it seems to play in all computers and players with the exception my trusty iMac G3 400 mhz special edition. Everytime I insert the disc I get a message that says "Cannot play disc. Folder not Found." Most commercial DVDs and one disc that I created is DVD Studio Pro 4 play fine. Anyone know why this happens?
imac G5 Mac OS X (10.3.9)
imac G5 Mac OS X (10.3.9)
imac G5 Mac OS X (10.3.9)

You'll find in the General in your Disc settings, in the Inspector Windows (if you click in any empty space of your Graphic View, you'll get you disc in the Inspector window).
In DVDSP Preferences, in Project settings, you can change the by default setting for new projects.
Alberto

Cannot synchronize as "medium not found"

I had a G2 (4GB) nano, worked well. Then we got a G3 nano (also 4 GB) and I connected it straight to my iTunes (didn't check before that it has to be under different user accounts Registered the new nano under another name, but somehow the whole process was unfinished and I couldn't get any songs on the iPod. And afterwards couldn't synchronize the old nano either! I have tried the following:
- pressing the "original status" button for my old iPod in order to delete all songs - now the iPod is without any songs!
- uninstalling and reinstalling the iTunes
- I have the latest iTunes and iPod versions already
When I connect any of the two iPods to the computer, it sometimes doesn't recognize at all that there is an iPod connected. When it does, it displays the name of the iPod and the number etc, but when I press "synchronize", it either synchronizes for hours (doing actually nothing and I have to end this task manually) or after a while displays a message "couldn't synchronize this and this iPod because the necessary medium was not found".
How to solve the problem??? I have an iTunes library full of songs and 2 nanos, but cannot use neither of them :((

it's done, thank you ..
i trashed the cache "iphoto ipod ...."
itunes latest, 10.7.3

Cannot delete itunes .msi not found and cannot install new one! please help

Please help me awhile ago i tried deleting then reinstalling th new version of itunes / quick time and after going through most of the installation process this comes up:
The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below.
Use source:
C:\Documents and Settings\Jordan\Local Settings\Application Data\Apple\Apple Software Update\
I made a picture of it here:http://i196.photobucket.com/albums/aa233/djjordie/cannotfindmsi.jpg
Then i tried uninstalling it (somehow it says its installed in add or remove programs) and the same message came up.
After ages of trying to figure it out and deleting heaps of things, when trying to install now it says:
1.run or cancel (thats not the problem) i click run picture here:http://i196.photobucket.com/albums/aa233/djjordie/cannotfindmsi.jpg
2.then it goes to this picture here:http://i196.photobucket.com/albums/aa233/djjordie/preparingtoinstall.jpg
3. then straight to this picture here:http://i196.photobucket.com/albums/aa233/djjordie/preparingtoinstall.jpg
without the the rest of the installation process...
SO i need to be able to delete it complety (the problem there is the .msi not being found).
Then install itunes / quick time without the .msi problem or the skipping of the installation process with it saying errors occurred ect...
Please help it would be much appreciated!
DJJORDIE

WHen you get trouble with msi files you usually need the Microsoft Installer cleanup utility.
Here is a method for removal of iTunes and related programs with clean up and reinstall.
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
http://support.microsoft.com/kb/290301/
(To run the program – All Programs>>Windows Install)
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.

Dfsrdiag StaticRPC Windows 2003 not found

Hi
I want to fix AD Replication port since in our organization we're going to activate Firewall between HeadQuarter and Remote Office
I followed this link http://social.technet.microsoft.com/wiki/contents/articles/584.active-directory-replication-over-firewalls.aspx?PageIndex=2
But for dfsrdiag StaticRPC /port:Branch01.sales.contoso.com
command on one of my DC, still in W2003R2Sp2 for now, i receive "command not recognized as internal or external..."
Thanks for your help

Hi
I'm on a DC that's why i want to fix port for replication
I'm on a production environnement and i don't have a test one, so i can't copy the DFSRIDAG from W2008 server to this DC and test if it works
So i want to know if DFSRDIAG is supported on W2003 and if it's right if i launch it from a W2008 throug the following command with the W2003 DC as /Member
dfsrdiag StaticRPC /port: <var
style="color:#2a2a2a;font-family:'Segoe UI', 'Lucida Grande', Verdana, Arial, Helvetica, sans-serif;line-height:16.954559326171875px;">nnnnn </var>/Member: <var
style="color:#2a2a2a;font-family:'Segoe UI', 'Lucida Grande', Verdana, Arial, Helvetica, sans-serif;line-height:16.954559326171875px;">Branch01.sales.contoso.com</var>

Ipod cannot sync file not found

Itunes will not sync ipod. it says "ipod mickey cannot sync, required file not found." but it is showing my ipod in itunes. can anyone help?

That can sometimes be caused by a damaged ipod photo cache.
If you remove the current ipod photo cache, does that get you past the error?
For instructions on where to find it, see the following document:
iTunes: Understanding the iPod Photo Cache folder

Files not found while installing Oracle 9iAS Rel 2 on Win2K

Hello,
When installing Oracle 9iAs Release 9.2.0.1.0 on Windows 2000, the installation pops up windows 'File not found' for a number of files like -
jarfiles.1.4.jar, jarfiles.1.2.jar.
I checked out and the files are not avialable in the installation. The setup disks are proper.
What could be the problem?
Regards,
Mandar

The release date has slipped. We've found some issues which must be fixed before we can release on Windows. Hopefully we will have it soon.
I understand that there is a high level of anticipation. I appreciate everyone's patience.
Thanks,
Ashesh Parekh
Oracle9iAS Product Management.

Cannot install ITunes--Mesage is "Apple Application Support was not found. Apple application Support is required to run ITunes Helper. Please uninstall ITunes, then install ITunes again. Error 2 (Windows Error 2)

Cannot install ITunes--Mesage is "Apple Application Support was not found. Apple application Support is required to run ITunes Helper. Please uninstall ITunes, then install ITunes again. Error 2 (Windows Error 2)

See Troubleshooting issues with iTunes for Windows updates.
tt2

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.

Cannot create Windows Media with PRE 8 - Writer not found

I have recently installed PRE 8 (paid single user) on my Windows 7 dual-core machine, and I have installed the 8.0.1 patch. I can import, edit and render video and audio just fine. I can save files as AVI and MPEG, but whenever I try to save a my movie as a Windows Media file, the rendering progress bar is displayed followed immediately by a pop-up entitled "Export error" with notification "Writer not found." I have reinstalled PRE8, turned of my antivirus, but nothing seems to resolve this problem. I cannot seem to find any remedy on the web. Anyone else experiencing this issue?

As I mentioned above I am running Windows 7 (omitted above: 64 Home Premium Edition). I have all updates installed, and I have verified I have latest device drivers. With regards to QuickTime, I am suffering from the accursed "Error 46: Could not load or fine Quicktime Active X control." So I am running withouy quicktime, but do I really need an Apple product to produce Windows Media?
I have tried to correct the Error 46 problem by using the "Subinacl/Reset" solution desribed in many places (e.g. http://research.gerger.com/?view=lab:en&aID=1006 under "Quicktime Annoyances"), but that solution isn't working for me. I can see that the issue is with registry priviledges -- no one can read the QT registry keys once QT is installed ("Insufficient Priviledge"). I suspect this solution isn't working, because I never installed an account named "administrator" on my machine, and it looks like the reset.cmd script assumes that you have.
I sure hope I don't need Quicktime to produce Windows Media, otherwise, I have spent a lot of money on a tool (PRE 8) that won't serve my needs.

HT201413 cannot reinstall itunes, i get this message MSVCR80.dll not found. Try to reinstall itunes and i get error 7 (Windows erro 126) help please

cannot reinstall itunes, i get this message MSVCR80.dll not found. Try to reinstall itunes and i get error 7 (Windows erro 126) help please

See Troubleshooting issues with iTunes for Windows updates.
tt2

FTP Error : Windows cannot acces folder ..... Details : Element not found

Hi All,
I'm just transferring to my new office that uses FTP as a means of storage for sensitive data. At first i can connect to ftp servers easily using windows explorer. But over time, when i'm about to connect to ftp server, the windows explorer replied
Windows cannot access this folder. Make sure you typed the file name correctly and that you have permission to access this folder. Details: Element not found
I can access the ftp server using IE or another web browser, even using WINSCP and other ftp file transfer software. I need to be able to connect to ftp server using windows explorer again. Can any of you help?
The ftp.exe is not blocked in firewall rules (i've checked).
Any comments/helps are appreciated.

Hi,
Firstly, make sure you have enable "Enable FTP folder view (outside of Internet Explorer)" setting:
Internet options -> Advanced -> Enable FTP folder view (outside of Internet Explorer)
And then try use mapping network drive:
1.Click on Computer.
2.Click on Map network drive from the menu.
3.Map Network Drive window will open. Now click on the link
Connect to a Web site that you can use to store your documents and pictures.
4.Now simply follow the step by step wizard to add a new network location. Select
Choose a custom network location when given the choice of where to create this network connection.
5.Type your ftp address. Specify a user name and password if required.
6.Give your newly created network location.
Alternative, use the registry method that was marked as answer in the following thread to fix it:
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/this-ftp-site-cannot-be-viewed-in-windows-explorer/e699d41e-98ae-48c1-9231-d570d46c0f38
Karen Hu
TechNet Community Support

Cannot Minimize Window LVPostMessage not found

Similar Messages

Maybe you are looking for