Cannot mount cdrom

Hi,
I can't mount a CDROM. DVDs are working fine. Here is the output of dmesg:
sr 6:0:0:0: [sr0] ASC=0x64 ASCQ=0x0
sr 6:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 da 00 00 00 02 00
end_request: I/O error, dev sr0, sector 223232
Buffer I/O error on device sr0, logical block 27904
sr 6:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 6:0:0:0: [sr0] Sense Key : 0x5 [current]
Info fld=0xda00, ILI
sr 6:0:0:0: [sr0] ASC=0x64 ASCQ=0x0
sr 6:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 da 00 00 00 02 00
end_request: I/O error, dev sr0, sector 223232
Buffer I/O error on device sr0, logical block 27904
sr 6:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 6:0:0:0: [sr0] Sense Key : 0x5 [current]
Info fld=0xda00, ILI
sr 6:0:0:0: [sr0] ASC=0x64 ASCQ=0x0
sr 6:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 da 00 00 00 02 00
end_request: I/O error, dev sr0, sector 223232
Buffer I/O error on device sr0, logical block 27904
sr 6:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 6:0:0:0: [sr0] Sense Key : 0x5 [current]
Info fld=0xda00, ILI
sr 6:0:0:0: [sr0] ASC=0x64 ASCQ=0x0
sr 6:0:0:0: [sr0] CDB: cdb[0]=0x28: 28 00 00 00 da 00 00 00 02 00
end_request: I/O error, dev sr0, sector 223232
Buffer I/O error on device sr0, logical block 27904
sr 6:0:0:0: [sr0] Result: hostbyte=0x00 driverbyte=0x08
sr 6:0:0:0: [sr0] Sense Key : 0x5 [current]
Info fld=0xda00, ILI
I'm on amd64. Any help would be nice.

I have the same problem, the dmesg output eventually ends with a segfault:
Buffer I/O error on device sr1, logical block 11617
sr 1:0:1:0: [sr1] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:1:0: [sr1] Sense Key : 0x5 [current]
sr 1:0:1:0: [sr1] ASC=0x64 ASCQ=0x0
sr 1:0:1:0: [sr1] CDB: cdb[0]=0x28: 28 00 00 00 2d 62 00 00 01 00
end_request: I/O error, dev sr1, sector 46472
Buffer I/O error on device sr1, logical block 11618
sr 1:0:1:0: [sr1] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:1:0: [sr1] Sense Key : 0x5 [current]
sr 1:0:1:0: [sr1] ASC=0x64 ASCQ=0x0
sr 1:0:1:0: [sr1] CDB: cdb[0]=0x28: 28 00 00 00 2d 62 00 00 01 00
end_request: I/O error, dev sr1, sector 46472
Buffer I/O error on device sr1, logical block 11618
sr 1:0:1:0: [sr1] Result: hostbyte=0x00 driverbyte=0x08
sr 1:0:1:0: [sr1] Sense Key : 0x5 [current]
sr 1:0:1:0: [sr1] ASC=0x64 ASCQ=0x0
sr 1:0:1:0: [sr1] CDB: cdb[0]=0x28: 28 00 00 00 2d 60 00 00 02 00
end_request: I/O error, dev sr1, sector 46464
Buffer I/O error on device sr1, logical block 11616
Buffer I/O error on device sr1, logical block 11617
blkid[11889]: segfault at 3c ip 00007fa4d7017eb1 sp 00007fff73c876d0 error 4 in libblkid.so.1.1.0[7fa4d7006000+1b000]

Similar Messages

Mounting Cdrom Drive In Guest Domain running 1.0.3

Folks,
I have followed the Admin guide on how to export Cdrom/Dvd drive from Service Domain to Guest Domain, however once allocated to the guest domain we are unable to mount the device. Any help is appreciated.
Here are my bindings
ldm list-bindings primary
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv SP 4 2G 0.8% ; 7d 18h 56m
MAC
00:14:4f:02:ca:6a
VCPU
VID PID UTIL STRAND
0 0 1.0% ; 100%
1 1 0.5% ; 100%
2 2 0.7% ; 100%
3 3 0.8% ; 100%
MAU
CPUSET
(0, 1, 2, 3)
MEMORY
RA PA SIZE
0x8000000 0x8000000 2G
VARIABLES
boot-device=/pci@780/pci@0/pci@9/scsi@0/disk@1,0:a /pci@780/pci@0/pci@9/scsi@0/disk@0,0:a
IO
DEVICE PSEUDONYM OPTIONS
pci@780 bus_a
pci@7c0 bus_b
VCC
NAME PORT-RANGE
primary-vcc0 5000-5031
CLIENT PORT
ldom3@ldom3 5002
VDS
NAME VOLUME OPTIONS DEVICE
primary-vds0 cdrom /dev/dsk/c1t0d0s2
vol1 /ldom1/bootfile1
vol11 /dev/rdsk/c6t60060480000287750594534653353445d0s2
vol2 /ldom2/bootfile2
vol3 /bootpool/bootfile3
CLIENT VOLUME
vdisk0@ldom3 vol3
vdisk11@ldom3 vol11
cdrom@ldom3 cdrom
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:4f:fa:c6:14 e1000g0 switch@0 prog,promisc
PEER MAC
vnet1@ldom3 00:14:4f:f9:c8:15
VCONS
NAME SERVICE PORT
SP
ldm list-bindings ldom3
root@host# ldm list-bindings ldom3
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
ldom3 active -n--- 5002 4 1900M 0.1% ; 15m
MAC
00:14:4f:f8:6c:1d
VCPU
VID PID UTIL STRAND
0 4 0.3% ; 100%
1 5 0.0% ; 100%
2 6 0.0% ; 100%
3 7 0.0% ; 100%
MEMORY
RA PA SIZE
0x8000000 0x88000000 1900M
VARIABLES
keyboard-layout=UK-English
NETWORK
NAME SERVICE DEVICE MAC
vnet1 primary-vsw0@primary network@0 00:14:4f:f9:c8:15
PEER MAC
primary-vsw0@primary 00:14:4f:fa:c6:14
DISK
NAME VOLUME TOUT DEVICE SERVER
vdisk0 vol3@primary-vds0 disk@0 primary
vdisk11 vol11@primary-vds0 disk@1 primary
cdrom cdrom@primary-vds0 disk@2 primary
VCONS
NAME SERVICE PORT
ldom3 primary-vcc0@primary 5002
We can see the exported cdrom volume in /dev/dsk as a new device and also at the ok prompt after running devalias.
However, we need to mount this device so that we can install software in our domain. All our attempts at mounting just hang and I end up having to stop/start the whole domain. ?
Is there an easy way to mount cdroms/dvd drives in a guest domain ?
TIA

There is an recently filed bug where DVDs (and ISO images) which do not have a VTOC in their disk label
fail to be mountable in the guest domain (e.g. application software DVDs as opposed to OS installation images).
6708257 DVD-ROM (not OS installation disk) can not mount from guest domain of LDOM 1.0.2
# mount -F hsfs /dev/dsk/c0d1s0 /mnt
mount: I/O error
mount: cannot mount /dev/dsk/c0d1s0
It's strange that you are getting a hang though (the reported error is an I/O error).
Are there any messages in /var/adm/message of the control domain?
What OS/patches are running on the guest and control domains (i.e is 127127-11 installed on both) ?
I've just had a thought though, exporting the DVD device as a slice instead may work
(it works for me on an ISO image but my machine is 1000s of miles away so I can't stick DVD in it
to try out)
e.g. ldm add-vdsdev options=slice /dev/dsk/c1t0d0s2 cdrom@primary-vds0

Cannot mount root during Solaris install on SPARCengine ULTRA axi

I use boot cdrom which sucessfully formats swp partition and copies files to hd. But then when I reboot I get the following:
SPARCengine(tm)Ultra(tm) AXi (UltraSPARC-IIi 440MHz), PS/2 Keyboard
OpenBoot 3.10.10 ME, 512 MB memory installed, Serial #10660686.
Ethernet address 8:0:20:a2:ab:4e, Host ID: 80a2ab4e.
ok boot disk4
Boot device: /pci@1f,0/pci@1/scsi@1/disk@4,0 File and args:
SunOS Release 5.8 Version Generic_108528-11 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
Cannot mount root on /pci@1f,0/pci@1/scsi@1/disk@4,0:a fstype ufs
panic[cpu0]/thread=10408000: vfs_mountroot: cannot mount root
0000000010407970 genunix:vfs_mountroot+70 (10435c00, 0, 0, 10410920, 10, 14)
%l0-3: 0000000010435c00 00000000104391c8 000000002f000000 0000000010435dc0
%l4-7: 0000000000000000 00000000104136b8 00000000000b7bf6 0000000000001bf6
0000000010407a20 genunix:main+94 (10410168, 2000, 10407ec0, 10408030, fff2, 1004
ef88)
%l0-3: 0000000000000001 0000000000000001 0000000000000015 0000000000000ea5
%l4-7: 0000000010428c28 0000000010462320 00000000000cd920 0000000000000540
skipping system dump - no dump device configured
rebooting...
Resetting ...
PS: I have recently reset the NVRAM on this machine not sure if there are any env settings I should have setup in OBP (I reset HOST ID and MAC-ADDRESS).

disk@0,0:a is slice/partition 0
disk@0,0:b is slice/partition 1
I'm not sure where you told it your swap slice was going to be. Looks like slice 1. Mini-root gets installed in slice 1 and then the install begins from there.
In the future, if you just "boot cdrom" from disk 1 of 2 you won't run into these issues.

Mounting cdrom drives in VM Guests

I've installed the latest version of OVM (whistler) and have installed a guest OEL5.3 environment (Vail). I can mount /mnt/cdrom on Whistler but it is never recognized in Vail. I have a /dev/sdc showing on Vail but get this when I mount it:
mount /mnt/cdrom
mount: No Medium Found.
My fstab on Vail has this:
/dev/hdc /mnt/cdrom iso9660 ro,user,noauto 0 0
Here's my vm.cfg file for Vail:
acpi = 1
apic = 1
builder = 'hvm'
device_model = '/usr/lib/xen/bin/qemu-dm'
disk = ['file:/OVS/running_pool/42_vail/System.img,hda,w',
'file:/OVS/running_pool/42_vail/user.img,hdb,w',
',cdrom,r',,
disk_other_config = []
kernel = '/usr/lib/xen/boot/hvmloader'
keymap = 'en-us'
memory = '1024'
name = '42_vail'
on_crash = 'restart'
on_reboot = 'restart'
pae = 1
serial = 'pty'
timer_mode = '2'
uuid = '04463b43-3fb2-444a-231b-90c3b39dc3da'
vcpus = 1
vif = ['bridge=xenbr0,mac=00:16:3E:49:3C:A0,type=netfront']
vif_other_config = []
vnc = 1
Any ideas?
Thanks!

There is an recently filed bug where DVDs (and ISO images) which do not have a VTOC in their disk label
fail to be mountable in the guest domain (e.g. application software DVDs as opposed to OS installation images).
6708257 DVD-ROM (not OS installation disk) can not mount from guest domain of LDOM 1.0.2
# mount -F hsfs /dev/dsk/c0d1s0 /mnt
mount: I/O error
mount: cannot mount /dev/dsk/c0d1s0
It's strange that you are getting a hang though (the reported error is an I/O error).
Are there any messages in /var/adm/message of the control domain?
What OS/patches are running on the guest and control domains (i.e is 127127-11 installed on both) ?
I've just had a thought though, exporting the DVD device as a slice instead may work
(it works for me on an ISO image but my machine is 1000s of miles away so I can't stick DVD in it
to try out)
e.g. ldm add-vdsdev options=slice /dev/dsk/c1t0d0s2 cdrom@primary-vds0

[SOLVED] Cannot "mount swap"

Hi
I cannot mount my swap partition! It stopped working some time ago (I don't know when exactly, I just saw this now).
When I try to mount it manually, I receive this error message: "Unknown filesystem type 'swap'".
Here is my fstab (I'm synchronized with the stable repo):
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /media/cdrom auto ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
UUID=1137358e-63f7-4d63-a98a-34d03ac5be0b /boot ext2 defaults,noatime 0 1
UUID=1ce2a0be-3cb7-45f1-aef9-83214ceb3d6a swap swap defaults
UUID=8e33d82d-b7bb-4ea4-aa58-99806a705328 /home reiserfs defaults,noatime 0 1
UUID=954fcd95-c5cc-452d-bd1c-efb8b76aeb22 / reiserfs defaults,noatime 0 1
Thanks in advance.
Last edited by Kknd (2008-08-04 15:19:00)

Wow even I accidentally disabled swap somehow and I tried everything, but it would not work ( http://bbs.archlinux.org/viewtopic.php?id=52252 ) . But, changing the line in fstab worked like a charm. Thanks!
(Maybe this is some sort of a bug? )

SunBlade 100 - cannot mount/boot from CD-Rom

Dear Forum,
Please excuse what are very basic questions - I'm very new to Sun and Unix and still feeling my way around :o) I would be very grateful if someone has the time to help me with this.
I installed Solaris 10 on my inherited Blade 100 and all works fine except for I cannot mount the cdrom (I get the message Mount point cannot be determined) Under advisement from a distant friend of a friend, I tried stopping vold and then mounting the drive but it still doesn't work. Another friend suggested I replace Solaris 10 with Debian Linux... but the poor ole blade couldn't find the CDROOM from the OK prompt either.
At a guess - I'm thinking that the drive has actually just died. The machine was sat around for 3 years doing nothing. But its equally likely that I screwed up the OS from being a complete airhead, so any tips on how to trouble shoot this would be most welcome.
If I need to replace the drive, I have a couple of old Ultras that I can cannibalize for a replacement drive - plus a few pcs. I would be grateful for any tips on doing this too.
many thanks in advance,
Kate

A couple or 'corrections' if I may.
There is no such command as probe-ide-all.
IDE devices can only be internal ones and the -all syntax is an OBP syntax to look at external devices.
It shouldn't work. It should not provide usable information.
If you need to review how to work within the OpenBoot environment,
then here is the OBP 4.x Command Reference Manual from Docs.Sun.Com
http://docs.sun.com/app/docs?q=816-1177
Next, your report that "boot cdrom" was returned when you probed the IDE bus ...
... just doesn't make sense.
A command does not produce another command as its output report.
The result of an OBP probe of whatever bus you're examining (not IDE, not SCSI)
should not return another command as its result.
Replace the optical drive in that SunBlade 100.
They were prone to spontaneous failure.
Just replace the drive.

Cannot mount certain partitions: /dev/ entries do not exist

Hello all. Strange problem here. First I will describe my disk layout. I triple boot Gentoo, Arch, and FreeBSD. My partitions look like this:
/dev/hda = MAXTOR 6L040J2, ATA DISK drive 40GB
hda1 = shared '/boot' partition
hda2 = gentoo '/' partition
hda3 = gentoo '/usr/' partition
hda4 = gentoo '/home' partition
/dev/hdb = SAMSUNG SP0802N, ATA DISK drive 80GB
hdb1 = shared music partition mounted as /home/music on both Gentoo and Arch
hdb2 = shared swap partition
hdb3 = FreeBSD partition
hdb4 = logical Partition
hdb5 = archlinux '/' partition
hdb6 = shared video partition mounted as /home/music/video on both Gentoo and Arch
Now both gentoo and arch use devfs. From gentoo I can see all partitions in the /dev directory and mount accordingly, however, from Arch I cannot mount my gentoo partitions on /dev/hda, and in fact they do not even exist in the /dev directory. Only /dev/hda1 is visible (the shared boot partition which holds all my kernels regardless of distro).
Running fdisk -l /dev/hda from arch gives me this puzzling output:
Disk /dev/hda: 40.0 GB, 40027029504 bytes
255 heads, 63 sectors/track, 4866 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 4111 33021576 55 EZ-Drive
So it would seem that fdisk thinks that /dev/hda1 takes up the entire drive, and is labeled as 'EZ-Drive'?!?!?!?!?!? I can assure you that running the same command from gentoo gives me the correct partitions and disklabels ie: id 83 Linux
Does anyone have a clue as to what is going on here? This isn't really a big deal at this point, just an interesting annoyance that I would like to discover the cause of.
TIA

I don't know how it could be that the kernels interpret the partition table differently, and I'm certainly not sure that this is what's going on. That's why I suggested loading Arch with the Gentoo kernel. I wouldn't expect the system to be its true self, but merely satesfy the curiosity by checking whether it would see the right partitions (a.k.a. trouble-shooting).
It shouldn't be a problem to test this, unless your Arch root uses a file system that is not built into your Gentoo kernel. If for instance hdb5 is reiserfs and your 2.4 kernel has that as a module, you're probably out of luck regarding my suggestion. If this is the case, you could also try the Arch 2.4 kernel. It can coexist with your current kernel because the kernel packages for the two trees have different names.
pacman -S kernel
Hope this helps,
-bogo

[SOLVED]mounting cdrom and usb devices doesn't work

Hello,
i have trouble mounting my usb devices. automount doesn't work and i can't mount them manually even as a superuser. here's the output of mount command:
mount: wrong fs type, bad option, bad superblock on /dev/sdc,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
i can mount cdrom manually but i can't do the same for my usb stick and external hard drives. it always complains about the above regardless of the filesystem. my devices are working under windows and other linuxes so i know hardware is not the problem.
i'm using lxde with pcmanfm.
if you need any other files just ask.
thanks
Last edited by the gray (2009-03-16 20:15:18)

above was the error when i tried to mount any usb device with "mount -t <type> /dev/sdc /media/mountpoint". and i couldn't mount any usb device as root from console. when i tried to mount devices using pcmanfm it just popped some empty dialogs and i couldn't find any mention of "IsCallerPriviliged failed" error so i (wrongly) presumed it wasn't that. i did try some of the other fixes mentioned in the forum with no success. but adding exec ck-launch-session startkde to my .xinitrc fixed the issue
thanks again
Last edited by the gray (2009-03-16 20:17:53)

Cannot mount any firewire/USB external drive after software update 10.5.4

After the last software update on 10.5.4 it did not complete the installation, and get stuck at the last step of running installation script for hours. So I have to restart the computer, and it restarted fine. Then I use Disk Utility to check my hard disk, and discovered some file system inconsistency error, so I repaired it (in target disk mode by another Mac). After it is repaired, the file system passed with no error.
But ever since then, I cannot mount any external firewire drive or USB drive. I cannot use Time Machine to backup my disk. I think my firewire and USB ports are fine because I can restart my iMac in target mode and connect to my MacBook via firewire, so the hardwire ports are functional, except that it seems 10.5.4 cannot detect or mount any external drive after the failed software update.
Does anyone encounter similar problem? How can I fix it? I have my disk backed up by TimeMachine but I cannot restore it if it won't let me mount my TimeMachine disk. Is there any other way other than completely reinstall 10.5 from scratch?

first, you should try reinstalling 10.5.4. download the [combo update|http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1054com boupdate.html] and run it. If that doesn't fix the issue, you can use full system restore from TM to go back to a time before the troubles started. to do that boot from the leopard install dvd, once past the language screen go to the Utilities menu at the top and choose "restore from backup".

Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command S, I get a looping "cannot mount errno = 19" message.

Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command + S, I get a looping "cannot mount errno = 19" message.
Problem started when I used Tech Tool Pro 6 to "de-fragment volume". Had to cancel that process before it finished because I ran out of time. Thereafter, when I startup my machine normally, I get the gray Apple logo at first, but it changes to a prohibited symbol (circle with a slash thru it) and hangs.
When I startup holding the Option key, I can see my internal drive, but I get the same results as above.
When I startup using the MacBook OSX Install DVD, it does not find my internal drive as possible destination.
When I startup using the MacBook OSX Install DVD and then run Disk Utility, it finds my drive, allows me to "repair" and says everything is fine.
When I startup with Command + S, I get a looping error message "errno = 19" and cannot stop it to do anything else.
When I startup from Disk Warrior v4.4, it does not find my internal drive to do any repairs.
When I startup from Tech Tool Pro 6 and run the "computer check" diagnostics, everything passes but the Volume Structure, which fails at "Volume Extents (B-tree)." When I use TTP's "Tools" option to run "volume repair" it will show my internal drive and allow me to click the GO button, but nothing happens and nothing changes.
I have a Time Machine backup on an external USB drive, but for as long as the internal drive doesn't mount, I can't use the backup to restore.

It's a false report and should be ignored.
I would not rely on TT as I've already said earlier even before Grant posted similar advice.
I really think the Rigid Disk Block may be corrupted. This holds the partition map and could prevent a volume from being unmounted. Unfortunately, there is no way to fix that without repartitioning the drive which will remove everything. So, before going down this road I hope you have backups or can make a backup.
Drive Partition and Format
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Proceed with reinstalling OS X.
5. Download and install Mac OS X 10.6.8 Update Combo v1.1.

Cannot Mount Any ISO in Windows 8.1 Pro

I cannot mount any ISO images on my Windows 8.1 Pro machine. I have tried the "Mount" under right-click as well as Powershell with the same results. From the UI, I get a simple message "Sorry there was a problem mounting the file."
while from Powershell I get an HResult that from searching seems to be rather generic.
I have followed the idea about upper filter and lower filter. I have made sure that the ISO is not "sparse". I made sure that ISO's are associated with Windows Explorer. I have tried a number of ISO's all from either TechNet or MSDN
with the same results. ProcMon doesn't really offer anything useful as the number of entries is overwhelming to try to limit to just mounting an image.
I read several posts where drive letters were an issue, but no guidance was given regarding what drive letter the virtual drive preferred.
I can mount the same ISO files on another Windows 8.1 Pro machine, so it isn't the ISO itself.
Any ideas? I have spent the entire day working on this problem and I really need some help.
Thanks,
Glen

I was struggling with this too. I found that the problem is a 'sparse' attribute that gets added by the Akamai downloader (known bug). To fix just copy the ISO (and the VHD) files to another folder this removes the (P). I found the answer at:
http://serverfault.com/questions/424794/fail-to-mount-image-files-in-windows-server-2012
Rusty
Rusty Brown
I have used mounting ISO images, sparce files and so on. No issues.
this suggests its time for a fresh install of windows, backup twice in case of the unthinkable
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

Mounting ZFS filesystems: (1/10)cannot mount directory is not empt(10/10

Hi
in zone:
bash-3.00# reboot
[NOTICE: Zone rebooting]
SunOS Release 5.10 Version Generic_144488-17 64-bit
Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.
Hostname: dbspfox1
Reading ZFS config: done.
Mounting ZFS filesystems: (1/10)cannot mount '/zonedev/dbspfox1/biblio/P622/dev': directory is not empt(10/10 )
svc:/system/filesystem/local:default: WARNING: /usr/sbin/zfs mount -a failed: exit status 1
Nov 4 10:07:33 svc.startd[12427]: svc:/system/filesystem/local:default: Method "/lib/svc/method/fs-local" fa iled with exit status 95.
Nov 4 10:07:33 svc.startd[12427]: system/filesystem/local:default failed fatally: transitioned to maintenanc e (see 'svcs -xv' for details)
For sure the directory in not empty, but the others too are not empty.
bash-3.00# zfs list
NAME USED AVAIL REFER MOUNTPOINT
zonedev 236G 57.6G 23K /zonedev
zonedev/dbspfox1 236G 57.6G 1.06G /zonedev/dbspfox1
zonedev/dbspfox1/biblio 235G 57.6G 23K /zonedev/dbspfox1/biblio
zonedev/dbspfox1/biblio/P622 235G 57.6G 10.4G /zonedev/dbspfox1/biblio/P622
zonedev/dbspfox1/biblio/P622/31mars 81.3G 57.6G 47.3G /zonedev/dbspfox1/biblio/P622/31mars
zonedev/dbspfox1/biblio/P622/31mars/data 34.0G 57.6G 34.0G /zonedev/dbspfox1/biblio/P622/31mars/data
zonedev/dbspfox1/biblio/P622/dev 89.7G 57.6G 50.1G /zonedev/dbspfox1/biblio/P622/dev
zonedev/dbspfox1/biblio/P622/dev/data 39.6G 57.6G 39.6G /zonedev/dbspfox1/biblio/P622/dev/data
zonedev/dbspfox1/biblio/P622/preprod 53.3G 57.6G 12.9G /zonedev/dbspfox1/biblio/P622/preprod
zonedev/dbspfox1/biblio/P622/preprod/data 40.4G 57.6G 40.4G /zonedev/dbspfox1/biblio/P622/preprod/data
bash-3.00# svcs -xv
svc:/system/filesystem/local:default (local file system mounts)
State: maintenance since Fri Nov 04 10:07:33 2011
Reason: Start method exited with $SMF_EXIT_ERR_FATAL.
See: http://sun.com/msg/SMF-8000-KS
See: /var/svc/log/system-filesystem-local:default.log
Impact: 33 dependent services are not running:
svc:/system/webconsole:console
svc:/system/filesystem/autofs:default
svc:/system/system-log:default
svc:/milestone/multi-user:default
svc:/milestone/multi-user-server:default
svc:/application/autoreg:default
svc:/application/stosreg:default
svc:/application/graphical-login/cde-login:default
svc:/application/cde-printinfo:default
svc:/network/smtp:sendmail
svc:/application/management/seaport:default
svc:/application/management/snmpdx:default
svc:/application/management/dmi:default
svc:/application/management/sma:default
svc:/network/sendmail-client:default
svc:/network/ssh:default
svc:/system/sysidtool:net
svc:/network/rpc/bind:default
svc:/network/nfs/nlockmgr:default
svc:/network/nfs/client:default
svc:/network/nfs/status:default
svc:/network/nfs/cbd:default
svc:/network/nfs/mapid:default
svc:/network/inetd:default
svc:/system/sysidtool:system
svc:/system/postrun:default
svc:/system/filesystem/volfs:default
svc:/system/cron:default
svc:/application/font/fc-cache:default
svc:/system/boot-archive-update:default
svc:/network/shares/group:default
svc:/network/shares/group:zfs
svc:/system/sac:default
svc:/network/rpc/gss:default (Generic Security Service)
State: uninitialized since Fri Nov 04 10:07:31 2011
Reason: Restarter svc:/network/inetd:default is not running.
See: http://sun.com/msg/SMF-8000-5H
See: man -M /usr/share/man -s 1M gssd
Impact: 17 dependent services are not running:
svc:/network/nfs/client:default
svc:/system/filesystem/autofs:default
svc:/system/webconsole:console
svc:/system/system-log:default
svc:/milestone/multi-user:default
svc:/milestone/multi-user-server:default
svc:/application/autoreg:default
svc:/application/stosreg:default
svc:/application/graphical-login/cde-login:default
svc:/application/cde-printinfo:default
svc:/network/smtp:sendmail
svc:/application/management/seaport:default
svc:/application/management/snmpdx:default
svc:/application/management/dmi:default
svc:/application/management/sma:default
svc:/network/sendmail-client:default
svc:/network/ssh:default
svc:/application/print/server:default (LP print server)
State: disabled since Fri Nov 04 10:07:31 2011
Reason: Disabled by an administrator.
See: http://sun.com/msg/SMF-8000-05
See: man -M /usr/share/man -s 1M lpsched
Impact: 1 dependent service is not running:
svc:/application/print/ipp-listener:default
svc:/network/rpc/smserver:default (removable media management)
State: uninitialized since Fri Nov 04 10:07:32 2011
Reason: Restarter svc:/network/inetd:default is not running.
See: http://sun.com/msg/SMF-8000-5H
See: man -M /usr/share/man -s 1M rpc.smserverd
Impact: 1 dependent service is not running:
svc:/system/filesystem/volfs:default
svc:/network/rpc/rstat:default (kernel statistics server)
State: uninitialized since Fri Nov 04 10:07:31 2011
Reason: Restarter svc:/network/inetd:default is not running.
See: http://sun.com/msg/SMF-8000-5H
See: man -M /usr/share/man -s 1M rpc.rstatd
See: man -M /usr/share/man -s 1M rstatd
Impact: 1 dependent service is not running:
svc:/application/management/sma:default
bash-3.00# df -h
Filesystem size used avail capacity Mounted on
/ 59G 1.1G 58G 2% /
/dev 59G 1.1G 58G 2% /dev
/lib 261G 7.5G 253G 3% /lib
/platform 261G 7.5G 253G 3% /platform
/sbin 261G 7.5G 253G 3% /sbin
/usr 261G 7.5G 253G 3% /usr
proc 0K 0K 0K 0% /proc
ctfs 0K 0K 0K 0% /system/contract
mnttab 0K 0K 0K 0% /etc/mnttab
objfs 0K 0K 0K 0% /system/object
swap 2.1G 248K 2.1G 1% /etc/svc/volatile
fd 0K 0K 0K 0% /dev/fd
swap 2.1G 0K 2.1G 0% /tmp
swap 2.1G 16K 2.1G 1% /var/run
zonedev/dbspfox1/biblio
293G 23K 58G 1% /zonedev/dbspfox1/biblio
zonedev/dbspfox1/biblio/P622
293G 10G 58G 16% /zonedev/dbspfox1/biblio/P622
zonedev/dbspfox1/biblio/P622/31mars
293G 47G 58G 46% /zonedev/dbspfox1/biblio/P622/31mars
zonedev/dbspfox1/biblio/P622/31mars/data
293G 34G 58G 38% /zonedev/dbspfox1/biblio/P622/31mars/data
zonedev/dbspfox1/biblio/P622/dev/data
293G 40G 58G 41% /zonedev/dbspfox1/biblio/P622/dev/data
zonedev/dbspfox1/biblio/P622/preprod
293G 13G 58G 19% /zonedev/dbspfox1/biblio/P622/preprod
zonedev/dbspfox1/biblio/P622/preprod/data
293G 40G 58G 42% /zonedev/dbspfox1/biblio/P622/preprod/data
What i missed? what happen with zfs dev directory?
thank you
Walter

Hi
I finally found the problem.
ZFS naming restrictions:
names must begin with a letter
Walter

Cannot mount USB disk in SIngle-user mode (solaris 10)

Hi all ,
I need some help please :
I can read/write to my USB disks when i'm in muti-user mode but when to I swith to single-user mode ( init S ), I cannot mount it.
in Single-user mode , i started volume management daemon :
#/etc/init.d/volgmt start
#volcheck
but i'm still not able to mount it.
I tried to mount manually:
#mount /dev/dsk/c2t0d0p0 /testpoint , i have this error: < mount : not a UFS magic number ( 0x0) , dev/dsk/c2t0d0p0 is not of this fstype.
My system recognizes the USB device though in single-user mode:
This is an output of #iostat -En
c2t0d0 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
Vendor: BUFFALO Product: ClipDrive Revision: 2.00 Serial No:
Size:0.07GB <65339392 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 1 Predictive Failure Analysis: 0

Hi ,
thanks for your advice. My problem is resolved.
The USB drive was actually a FAT filesystem.
so I did # mount -F pcfs /dev/dsk/c2t0d0p0:c /testpoint and everything went fine
I can read/write to my USB disks when i'm in
muti-user mode but when to I swith to single-user
mode ( init S ), I cannot mount it.
in Single-user mode , i started volume management
daemon :
/etc/init.d/volgmt start
#volcheck
but i'm still not able to mount it.It probably requires other items to be started
first.
I tried to mount manually:
#mount /dev/dsk/c2t0d0p0 /testpoint , i have
this
error: < mount : not a UFS magic number ( 0x0) ,
dev/dsk/c2t0d0p0 is not of this fstype.
Looks like it's assuming UFS. If this is a pcfs
filesystem, give it the type on the mount line.
# mount -F pcfs /dev/dsk/c2t0d0p0 /testpointYeah, this was the right command, I had to specify option < -F pcfs >.
but I read somethere on this forum i had to specify :c as the drive for FAT at the end of c2t0d0p0 , so the full command was:
# mount -F pcfs /dev/dsk/c2t0d0p0:c /testpoint
>
DarrenThanks,
Sakolan.

Error message in Command line (cannot mount database in EXCLUSIVE mode)

Hello Experts
I'm new in Oracle and trying to connect to my database though SQL command line. After I login as SYS I user I get the message that 'connected to idle instance'. Then I use “STARTUP” to connect to database. Now from my understanding it should mount the database and open it as well. But it does'nt happens.Instead I get the message 'cannot mount database in EXCLUSIVE mode' . I'm not sure why it can't mound the database and what should I do to make it working. Please can somebody show me how to make it working again. Here are the details about my problem
Enter user-name: SYS as SYSDBA
Enter password:
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 595591168 bytes
Fixed Size 1220748 bytes
Variable Size 301993844 bytes
Database Buffers 285212672 bytes
Redo Buffers 7163904 bytes
ORA-01102: cannot mount database in EXCLUSIVE mode
Thanks a lot in advance.

Thank you so much for both of you. I've checked everything. All looks fine to me and then i tried to connect though SQL and it worked. Now what I've notice that this time I didn't start Enterprise Manager only I started the listner and then start sql it worked. Does this means that I can't use both SQL and EM at a time together?

Portal on Unix cannot mount Windows File server

Hi Experts,
We had installed a NW 7.0 portal onto HP-UNIX server and integrated it with MS AD server. Now, we are facing an issue that we cannot mount windows files server when we tried to configured it with TREX. Had anyone tried this function or it is the limitation? Is the following statement still correct or do we have workaround solutions?
"If you are using the Microsoft Active Directory Service, you can only integrate documents into a Windows portal. The combination of Microsoft Active Directory Service and a UNIX portal is not supported."
Best Regards

Hi Tom,
have a look at this link:
[http://help.sap.com/saphelp_nw04s/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm]
Your issue should work, but the prerequisite is for using the windows permissions:
"If you are using Microsoft Active Directory Service, you have to operate the Windows domain in mixed mode". If it is running in Native mode you cannot use the windows permissions. Nevertheless integrating documents into KM should work. The KM uses its own permissions instead.
Best regards,
Denis

Cannot mount cdrom

Similar Messages

Maybe you are looking for