Cannot mount my 250GB internal NTFS drive.

I used to get the following error when I would attempt to mount it via the gnome panel:
"Cannot get volume.fstype.alternative"
It's the drive that I have Windows XP on, I'm dual booting. Anywho, something changed (I might've updated my system) and now it does nothing when I attempt to mount it, no error whatsoever.
Any ideas?

https://bugs.launchpad.net/ubuntu/+sour … bug/300443
http://forum.eeebuntu.org/viewtopic.php?f=45&t=3252
http://bbs.archlinux.org/viewtopic.php?pid=535088
Can these help?

Similar Messages

Thunar dont show (and dont mount) removable devices and ntfs drives

hi.this my first topic
im using arch+openbox+thunar
and thunar dont show (and dont mount) removable devices and ntfs drives
more info:
i'v installed :
gvfs , gvfs-smb , gvfs-afp , thunar-volman , polkit , gnome-polkit , ntfs-3g
thunar-volman output for CD/DVD:
thunar-volman: Could not detect the volume corresponding to the device.
thunar-volman output for USB:
thunar-volman: Unsupported USB device type.
thunar-volman: Unsupported USB device type.
thunar-volman: Unknown block device type.
thunar-volman: Could not detect the volume corresponding to the device
~/.xinitrc:
openbox-session
~/.config/openbox/autostart:
thunar --daemon &
sleep 1 && /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1 &
tint2 &
sh ~/.fehbg &
conky &
pstree output:
[hamon@dhcppc0 ~]$ pstree
systemd─┬─agetty
├─at-spi-bus-laun─┬─dbus-daemon
│ └─3*[{at-spi-bus-laun}]
├─at-spi2-registr───{at-spi2-registr}
├─conky───3*[{conky}]
├─2*[dbus-daemon]
├─dbus-launch
├─dhcpcd
├─polkitd───5*[{polkitd}]
├─sh───polkit-gnome-au───{polkit-gnome-au}
├─slim─┬─X
│ └─bash───openbox───opera───3*[{opera}]
├─systemd───(sd-pam)
├─systemd-journal
├─systemd-logind
├─systemd-udevd
├─terminator─┬─bash───pstree
│ ├─gnome-pty-helpe
│ └─{terminator}
├─tint2
└─xfconfd
please help me
Last edited by hamon (2013-11-05 09:17:21)

Please use code tags. If you don't know how to do this, click the 'BBCode' link on the bottom of the page for instructions (there are all kinds of neat formatting tricks included as well).

Cannot mount any firewire/USB external drive after software update 10.5.4

After the last software update on 10.5.4 it did not complete the installation, and get stuck at the last step of running installation script for hours. So I have to restart the computer, and it restarted fine. Then I use Disk Utility to check my hard disk, and discovered some file system inconsistency error, so I repaired it (in target disk mode by another Mac). After it is repaired, the file system passed with no error.
But ever since then, I cannot mount any external firewire drive or USB drive. I cannot use Time Machine to backup my disk. I think my firewire and USB ports are fine because I can restart my iMac in target mode and connect to my MacBook via firewire, so the hardwire ports are functional, except that it seems 10.5.4 cannot detect or mount any external drive after the failed software update.
Does anyone encounter similar problem? How can I fix it? I have my disk backed up by TimeMachine but I cannot restore it if it won't let me mount my TimeMachine disk. Is there any other way other than completely reinstall 10.5 from scratch?

first, you should try reinstalling 10.5.4. download the [combo update|http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1054com boupdate.html] and run it. If that doesn't fix the issue, you can use full system restore from TM to go back to a time before the troubles started. to do that boot from the leopard install dvd, once past the language screen go to the Utilities menu at the top and choose "restore from backup".

Cannot access my second internal hard drive after changing permissions

Changed the permissions by mistake on the second internal hard drive and now windows 7 cannot see it. Going to My Computer Icon, ?>>> Manage >> Disk Management and Try to initialize it but i get the incorrect function error.
How can i get back access to my hard drive.?

Hi Alex,
What is your current situation?
You may check if you could manage the disk through diskpart:
A Description of the Diskpart Command-Line Utility
Under diskpart, enter the following line:
List disk
As Frederik suggested, please check the disk health first.
Best regards
Michael Shao
TechNet Community Support

Cannot mount dvd or usb flash drive in kde 4.6 ?

Hi,
I am unable to mount a dvd in kde 4.6 I keep getting the following error:
udisk error permission denied: not authorised
I have added myself to storage, disk and all the normal groups. I had the same problem with a flash drive but after adding the following as 11-media-by-label-auto-mount.rules in /etc/udev/rules.d the flash drive now mounts but will not safely unmount. I have set removable media to automount in system settings.
Any ideas what the problem is with udisks/udev in kde 4.6?
KERNEL!="sd[a-z][0-9]", GOTO="media_by_label_auto_mount_end"
# Import FS infos
IMPORT{program}="/sbin/blkid -o udev -p %N"
# Get a label if present, otherwise specify one
ENV{ID_FS_LABEL}!="", ENV{dir_name}="%E{ID_FS_LABEL}"
ENV{ID_FS_LABEL}=="", ENV{dir_name}="usbhd-%k"
# Global mount options
ACTION=="add", ENV{mount_options}="relatime"
# Filesystem-specific mount options
ACTION=="add", ENV{ID_FS_TYPE}=="vfat|ntfs", ENV{mount_options}="$env{mount_options},utf8,gid=100,umask=002"
# Mount the device
ACTION=="add", RUN+="/bin/mkdir -p /media/%E{dir_name}", RUN+="/bin/mount -o $env{mount_options} /dev/%k /media/%E{dir_name}"
# Clean up after removal
ACTION=="remove", ENV{dir_name}!="", RUN+="/bin/umount -l /media/%E{dir_name}", RUN+="/bin/rmdir /media/%E{dir_name}"
# Exit
LABEL="media_by_label_auto_mount_end"

Thanks adee. I deleted the udev rule as it didn't work any way.
I gradually homed in on policykit: I was testing out xrdp for remote session and now I can see the logic of not letting a remote user access removable media etc. It was one of the reasons for the policykit idea in the first place, to limit access for remote sessions-it sure works.
I changed one of the policykit rules to (inactive=no to yes) to see if that would work but still no go which is a bit strange.

Internal NTFS drive/Finder issue

I have a drive from my PC that recently died that I installed into my G4. It appears on the desktop, but when I select it in the finder, I get the colored wheel forever. Read-only is fine as I need to xfer a lot of files to another drive in the G4, but I'd like to avoid using the command line shell. Any ideas why the finder will not let me see the dirs and files?

I looked up "ntfs" in Apple's knowledge base. Found this article
http://docs.info.apple.com/article.html?artnum=75320
Toward the bottom, it says, "Do not use NTFS formatted drives in a Macintosh computer."

I cannot mount a external DVD usb drive

Hello,
I am trying to install a extenal DVD usb in a sparc enterprise t5220 with Solaris 10. After connecting the device i got this message:
WARNING: Device /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/hub@4/cdrom@2/disk@0,0 failed to power up.
WARNING: /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/hub@4/cdrom@2/disk@0,0 (sd3):
Command failed to complete...Device is gone
I rebooted the server and used different ports but i still got the same message several times.
Is there some one that can tell me if this is a hardware problem or is there any procedure to install and/or mount this external device?
Thanks

USB drives can not be used to boot a PowerPC Mac so you will not be able to install new OS X; recover in the event of a major problem or repair the hard disk if it become corrupt to name a few examples if you purchase a USB drive.
Firewire performance on the Mac is also far superior to USB2.0 performance.
mrtotes

Cannot mount external USB drive

During a recent update I remember pacman asking about replacing some package with another package to handle disk mounting. I think the added package was "gnome-volume-manager" or "gnome-disk-utility" (or both). I didn't see any postings describing problems with doing this, so went ahead and allowed the change. Now it's a few days later and I find I cannot mount an external USB hard drive anymore. It has an entry in fstab, and although I have tried mutiple edits of the device to associate the drive with, nothing works.
The disk used to associate with /dev/sdb1. Now this device no longer exists. Here is what has happened to my /dev/sd* entries:
brw-rw---- 1 root disk 8, 0 2009-10-27 11:08 /dev/sda
brw-rw---- 1 root disk 8, 3 2009-10-27 11:08 /dev/sda3
brw-rw---- 1 root disk 8, 1 2009-10-27 11:08 /dev/sda1
brw-rw---- 1 root disk 8, 2 2009-10-27 11:08 /dev/sda2
brw-rw---- 1 root disk 8, 4 2009-10-27 11:08 /dev/sda4
brw-rw---- 1 root storage 8, 16 2009-11-04 13:00 /dev/sdb
Trying to force association with "/dev/sdb" "/dev/sda5" (or some other number not in use) or "sdb1" (or 2,3,4, whatever) just yields "special device ... does not exist".
Does anybody know how to deal with this?
Does anybody know what package(s) I replaced when the update in question took place? I think I'd like to reverse whatever happened.
And on another note, I think another gnome-based package also recently replaced a package relating to printing. Yesterday I discovered I have printing problems too:
At first there were no printers found. Although cups is supposed to start according to rc.conf, cupsd was not running. I started it manually and then all the printers showed up again, though I cannot print duplex (again, worked fine before). What is going on with these gnome packages?!? Anyone know which package(s) I need to remove (and then what to put back) to make printing work like it used to also?
thanks much.

oddly, fdisk -l shows nothing, even for disks which are mounted (eg. /dev/sda4). when I insert a standard USB thumb drive, the following show up properly:
brw-rw---- 1 root storage 8, 32 2009-11-05 10:50 /dev/sdc
brw-rw---- 1 root storage 8, 33 2009-11-05 10:50 /dev/sdc1
and I am able to mount and use the drive as usual.
The external drive I've been struggling with has xfs for filesystem type. After using the thumb drive, /dev/sdb showed up spontaneously, but no /dev/sdb1. attempting to mount gives:
mount: /dev/sdb is not a valid block device
or
mount: special device /dev/sdb1 does not exist
depending on which device is specified in fstab.
I am thinking that either a) my ability to mount xfs filesystems has somehow been hosed, or b) there is something wrong with drive, which must have spontaneously failed very recently (it is less than 1 yr old, but this happens from time to time).
If the drive is okay, any ideas about how mounting xfs filesystems could have been broken by recent upgrades?
btw, the fstab entry (which worked fine until a couple days ago) is: /dev/sdb1 /mnt/external_1 xfs rw,noauto,user,exec 0 0

Some NTFS drives will not mount - PLEASE HELP

For years I have heard "Apple fan-boys" preaching about how MAC is much better than PC. I am one of the idiots that bought into the hype, and I am regretting it tremendously. I spent over $4000 this month converting my family's computers from PC to Mac, and I am finding it to be one of the biggest mistakes of my life. I have had nothing but problems.
My latest and greatest problem is getting my Mac(s) to mount and read some NTFS drives. I know NTFS does write on MAC without external software, but I am not trying to write NTFS with my Macs. I bought a Glyph 8TB external hard drive that is formatted for Mac. I am simply trying to take five different NTFS external hard drives, and drag their data onto my new 8TB Glyph drive that is formatted to Mac. Here is where it gets weird. I have 2 Samsung 500GB drives (NTFS) that mounted automatically, read and data transferred to my new Mac formatted drive (HTP+) without any problems. But I have 2 Glyph 6TB (NTFS) drives, and a Toshiba 2TB (NTFS) drive - none of which will mount. They didn't mount automatically, like the Samsung drives. They do all show up in disk utility, but when you click "mount" is gives you the "mount failed" error (with the "repair" option grayed out, and unavailable). When plugged back into a PC, all three of the drives function perfectly - so clearly the drives are fine. I would greatly appreciate it if anyone can help. I have spent an entire day of my life searching forums for resolutions on this one simple issue. I see a ton of people are having similar issues. Unlike PC forums that have always been easily able to resolve my major issues with a quick search, it seems that these NTFS mounting issues have Apple, and the entire Apple community, stumped.
To anyone considering the Mac vs. PC conversion, think long and hard before you convert to Mac. The Macs are more fun for video, music and photo editing. But for every other practical application I find that PC was much better. I am regretting giving Apple over $4000 of business. I wish that I could return all 4 Macs that I purchased.
My relevant system info:
Macbook Pro 13"
Intel i7, 8GB memory, 750GB HD
OS X 10.9.4

I can't seem to find a way to edit my initial post (stupidly, it only shows the edit tab on replies). I just want to correct the 6th sentence of my original post. It was meant to read:
"I know NTFS does NOT write on MAC without external software, but I am not trying to write NTFS with my Macs."

Why does dying internal hard drive stop you booting from external hd

Why do I need an internal hard drive if I am booting from an external drive? Doesnt make sense,
Disk Utility warned me that the internal hard drive is failing. I have managed to change start up disks. I have an external bootable drive and even have an empty partition on it, "just in case" I need to install a brand new OS, but here I am waiting for local disks, and I cant access my back-up OS.
Why doesnt OSX just move past the dying faulty hard drive and get to work on the bootable disk? Basically here I am supposedly doing all the right things to cover for an emergency - I may as well have no backup strategy.
Am I missing a step, or is this how OSX works. Perhaps if you read the steps and outcomes below, you can see if there is more I need to do?
If I press "option" at start up, it only shows the internal drive, not recognising the external bootable drive.
fsck -f produced a looping "missing thread" message that went on for an hour or more so I stopped that.
I tried the dvd and command-c at start up, got through to the installer window and when I selected disk utility it hung, but no spinning ball, just nothing was happening.
The next attempt with th DVD i changed start up disk, this time it saw the external bootable drive and I thought I was in business again.
And here I am full circle, waiting for local disks.
Any thoughts most welcome.
btw, does the SMART issue a warning of a failing drive because a drive is definitely unsalvagable due to a mechanical fault? or is there a chance my drive is physiclly healthy but shows as Failing because it has unbelievable directory issues that Apple tools cannot solve - but DW could?
PB Ti 867MHz 768MB RAM Mac OS X (10.3.9)
PB Ti 867MHz 768MB RAM Mac OS X (10.3.9)

The Bombich forums have helped me troubleshoot the integrity of the bootable volumes on my external hard drive which I made using Carbon Copy Cloner. The clones are fine ie after I reset nvram after booting up via command-alt-o-f, the clones are now recognised when I boot up-alt. So it seems that there was nothing wrong with the bootable volumes on the external drive per se.
However, the Powerbook will still not boot up past "Waiting for local disks".
As it stands now, nobody seems to be able to give a reason why I cannot bypass the failed internal hard drive. I found a Knowledge base article from Apple saying Cmd-Alt-shift-delete at start-up should skip you to the next working volume hitched up to your computer, but that didn't work either.
I have a new internal HDD coming, so prior to installing it, the final part of the troubleshoot will be to reboot the PB without an internal HDD. I will see what happens and see what conclusions can be drawn from that. Unless anyone has a clue now from what I have posted?
PB Ti 867MHz 768MB RAM Mac OS X (10.3.9)

How to upgrade internal hard drive

Hi. I have a MBP that came with a 250GB internal hard drive. The hard drive model name is "FUJITSU MJA2250BH FFS G1 Media". I would like to upgrade to a 500GB internal hard drive. How do I do this? Do I have to take the laptop back to an Apple store and have it done there?
Thank you

I just upgraded my MBP 15" internal drive. Bought a DIY kit from OWC, took less than 30 minutes, very easy. DIY kit includes the drive, tools needed plus an external enclosure from which you can clone your current drive to the new one prior to replacing. Instruction video on OWC web site walks you through the details in a very easy step by step process.
Matt

Questions about installing a large internal hard drive

Hello all,
I recently bought a Seagate 250GB internal hard drive for my Power Mac G4 (AGP graphics). I intend to install it alongside my old 20GB drive. I have a couple of questions about installing it:
• What kind of PCI card do I need in order to use the full capacity of the drive?
• I'm considering partitioning the drive and installing Debian Linux on one partition. Is it possible that Debian won't recognize the PCI card?
• Is it possible to connect (RAID?) the old and new drives together so that they appear as one big 270GB drive? Is this a good idea?
• What is the easiest way to copy the contents of my old drive onto the new one? I'd like an exact copy so that I don't have to reinstall the system and everything else; can Carbon Copy Cloner do that?
Thanks for any help and advice!
Power Mac G4 - AGP graphics Mac OS X (10.4.3) 768 MB RAM

• What kind of PCI card do I need in order to use the
full capacity of the drive?
If the drive is an SATA drive you need an SATA controller. If an IDE/ATA drive you need an IDE controller.
• I'm considering partitioning the drive and
installing Debian Linux on one partition. Is it
possible that Debian won't recognize the PCI card?
You should check the Hardware Compatibility List for Debian against your potential mac compatible purchases. You might also get some good information from Yellow Dog Linux compatibility lists.
• Is it possible to connect (RAID?) the old and new
drives together so that they appear as one big 270GB
drive? Is this a good idea?
If you want to stripe the 2 dives together your overall performance will be slowed down by the slower of the two drives. For example, If you have one 5400rpm drive and another 7200rpm drive, the RAID will be bogged down by the slower drive so you wont get the full benefit of the lower latencies of the 7200. You will still get some of the faster transfer times, just not the lower latencies.
Wether or not it's a good idea depends on your personal needs. Do you need a drive that can can move very large files to and from memory quickly (bandwidth) or a drive that can locate and serve up the files quickly (latency)?
• What is the easiest way to copy the contents of my
old drive onto the new one? I'd like an exact copy
so that I don't have to reinstall the system and
everything else; can Carbon Copy Cloner do that?
CCC should work fine for you. You could also use the command line asr utility.

Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command S, I get a looping "cannot mount errno = 19" message.

Disk Utility says everything's fine, but Install disk doesn't find my internal drive as a possible destination. When I startup with Command + S, I get a looping "cannot mount errno = 19" message.
Problem started when I used Tech Tool Pro 6 to "de-fragment volume". Had to cancel that process before it finished because I ran out of time. Thereafter, when I startup my machine normally, I get the gray Apple logo at first, but it changes to a prohibited symbol (circle with a slash thru it) and hangs.
When I startup holding the Option key, I can see my internal drive, but I get the same results as above.
When I startup using the MacBook OSX Install DVD, it does not find my internal drive as possible destination.
When I startup using the MacBook OSX Install DVD and then run Disk Utility, it finds my drive, allows me to "repair" and says everything is fine.
When I startup with Command + S, I get a looping error message "errno = 19" and cannot stop it to do anything else.
When I startup from Disk Warrior v4.4, it does not find my internal drive to do any repairs.
When I startup from Tech Tool Pro 6 and run the "computer check" diagnostics, everything passes but the Volume Structure, which fails at "Volume Extents (B-tree)." When I use TTP's "Tools" option to run "volume repair" it will show my internal drive and allow me to click the GO button, but nothing happens and nothing changes.
I have a Time Machine backup on an external USB drive, but for as long as the internal drive doesn't mount, I can't use the backup to restore.

It's a false report and should be ignored.
I would not rely on TT as I've already said earlier even before Grant posted similar advice.
I really think the Rigid Disk Block may be corrupted. This holds the partition map and could prevent a volume from being unmounted. Unfortunately, there is no way to fix that without repartitioning the drive which will remove everything. So, before going down this road I hope you have backups or can make a backup.
Drive Partition and Format
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Proceed with reinstalling OS X.
5. Download and install Mac OS X 10.6.8 Update Combo v1.1.

Cannot mount NTFS file system on USB drive

I plug in external disk via USB drive. I attempt to mount drive. I've downloaded several NTFS rpms.
I believe the issue is that I do not yet have the correct NTFS rpm. Any help?
[root@kclinux1 media]# mount -t ntfs /dev/sdc1 /media/usbdrive/
mount: unknown filesystem type 'ntfs'
[root@kclinux1 media]# cat /proc/filesystems |grep ntf
[root@kclinux1 media]# uname -a
Linux kclinux1 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:41:04 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
[root@kclinux1 media]# rpm -qa|grep ntfs
ntfsprogs-1.9.4-1.2.el4.rf
kernel-module-ntfs-2.6.18-128.1.1.el5xen-2.1.27-0.rr.10.11
kernel-module-ntfs-2.6.18-128.el5xen-2.1.27-0.rr.10.11
[root@kclinux1 media]#

try
step 1)
# Red Hat Enterprise Linux 5 / i386:
rpm -Uhv http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.3.6-1.el5.rf.i386.rpm
# Red Hat Enterprise Linux 5 / x86_64:
rpm -Uhv http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS//rpmforge-release-0.3.6-1.el5.rf.x86_64.rpm
# Red Hat Enterprise Linux 4 / i386:
rpm -Uhv http://apt.sw.be/redhat/el4/en/i386/rpmforge/RPMS/rpmforge-release-0.3.6-1.el4.rf.i386.rpm
# Red Hat Enterprise Linux 4 / x86_64:
rpm -Uhv http://apt.sw.be/redhat/el4/en/x86_64/rpmforge/RPMS/rpmforge-release-0.3.6-1.el4.rf.x86_64.rpmstep 2)
apt-get updatestep 3)
> yum install ntfs-3g
> ntfs-3g /dev/sdxy /<mount directory>
rgrds

[SOLVED] Cannot mount ntfs drive

Every time I try to mount my Windows 7 hdd, I receive an error:
fuse: mount failed: Device or resource busy
The commands I used to try to mount all resulted in the same error:
sudo mount /dev/sdb1 /mnt/ntfs
sudo mount -t ntfs-3g /dev/sdb1 /mnt/ntfs
sudo mount /dev/disk/by-uuid/C0940E83940E7BE2 /mnt/ntfs
Switching to root also did not remedy the error. Putting the entry in fstab does not mount it at boot, giving the same error.
fdisk -l reveals the following:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x79109c6b
Device Boot Start End Blocks Id System
/dev/sda1 * 63 97659134 48829536 83 Linux
/dev/sda2 97659135 107426654 4883760 82 Linux swap / Solaris
/dev/sda3 107426655 1953520064 923046705 83 Linux
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xed6ad455
Device Boot Start End Blocks Id System
/dev/sdb1 * 2048 976771071 488384512 7 HPFS/NTFS/exFAT
Any help would be appreciated. Thank you.
EDIT: Solution:
As it turns out, a couple years ago, I had a mirrored RAID. Even when got rid of the RAID, got a new drive, reformatted and installed Arch, my secondary, NTFS drive would not mount.
Here is exactly what fixed it:
Issuing the command `cat /proc/mdstat` shows all RAID arrays. Mine showed the following:
Personalities :
md127 : inactive sdb[1](S)
488386496 blocks
`sudo mdadm --stop /dev/md127` stopped the array.
`sudo mdadm --remove /dev/md127` removed the array.
new output of `cat /proc/mdstat`
Personalities :
unused devices: <none>
`sudo mount /dev/sdb1 /mnt/1` worked.
Last edited by AngryKoala (2011-06-11 23:30:31)

vadmium wrote:
You don’t happen to have something that sdb1 partition mounted or opened somewhere else? If I try to mount my NTFS partition while it’s already mounted it gives the same “Device or resource busy”.
What does the “mount” and “cat /proc/mounts” tell you?
Output of mount:
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
sys on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=10240k,nr_inodes=506959,mode=755)
run on /run type tmpfs (rw,nosuid,nodev,noexec,relatime,size=10240k,mode=755)
/dev/sda1 on / type ext4 (rw,noatime,commit=0)
devpts on /dev/pts type devpts (rw,relatime,mode=600,ptmxmode=000)
shm on /dev/shm type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,mode=1777)
tmpfs on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777,size=10m)
tmpfs on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755,size=10m)
/dev/sda3 on /home type ext4 (rw,noatime,commit=0)
Output of cat /proc/mounts:
rootfs / rootfs rw 0 0
proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0
sys /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0
udev /dev devtmpfs rw,nosuid,relatime,size=10240k,nr_inodes=506959,mode=755 0 0
run /run tmpfs rw,nosuid,nodev,noexec,relatime,size=10240k,mode=755 0 0
/dev/sda1 / ext4 rw,noatime,barrier=1,data=ordered 0 0
devpts /dev/pts devpts rw,relatime,mode=600,ptmxmode=000 0 0
shm /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0
tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0
tmpfs /var/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=10240k 0 0
tmpfs /var/run tmpfs rw,nosuid,nodev,noexec,relatime,size=10240k,mode=755 0 0
/dev/sda3 /home ext4 rw,noatime,barrier=1,data=ordered 0 0

Cannot mount my 250GB internal NTFS drive.

Similar Messages

Maybe you are looking for