Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
Thanks, Rick

The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up?

Similar Messages

"the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

Hi all,
I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
"the finder cannot complete the operation because some data in [name of
iMovie file] could not be read or written (Error Code 26)" or the
message "A project file is missing. The file [name of the QuickTime
movie inside the project.dv] couldn't be opened and is being skipped."
This happened suddenly, I was able to save a backup version numerous
times while working on the project.
I followed some of Karl Petersen's advise on apple discussions. I opened
the package contents, and everything seems to be there. The source file
(original QuickTime movie) is there and can be opened and played. I
replaced the current project file with the backup in the package
contents, but that did not change anything. I was able to export the
movie timeline into a new project as a single clip, but would like to be
able to copy the current project.
Thanks for any ideas..

Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

The finder can't complete the operation because some data in "VIDEO_TS.BUP "can't be read or written (error code-36)

the finder can't complete the operation because some data in "VIDEO_TS.BUP "can't be read or written (error code-36)

I faced the same problem and i fixed it by going to applications - utility - disk utility and fixing the errors.

Trying to copy iPhoto Library to external hard drive for backup. Error message: The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

Trying to copy iPhoto Library to external hard drive for backup. Error message: The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

That code is
-36
ioErr
I/O error (bummers)
Make sure the EHD is formatted OS X Extended (journaled) and run Disk Utilty on the EHD and repair the disk. If that fails to help I'd try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the external HD as the location of the newly rebild library.
Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
OT

While trying to recover an aperture library I get the following error "The Finder can't complete the operation because some data in "DSC_0435.NEF" can't be read or written (Error code - 36)".

I've managed to look at the folders inside of the library and have pinpointed the image that has the error, but I can't delete it while on time machine. How can I get rid of this picture so I can bring back the aperture library back to my laptop?

The Time Machines Backup is formated as Mac OS Extended (Case Sensitive, Journaled), my mac is formated as Mac OS Extended (Journaled).
The names on the file are all Uppercase
When I try to copy the Aperture file, it copies about 70% of the file (it's about 33GB in size), and halfway through I get this error.
I'm able to copy 99.99% of all of the images if I open the Aperture Folder using the "show package contents" under the backups using finder (Time Machine Backups>Backups.backupdb>CQ Macbook Air>2012-04-30-070933>HD.....>Pictures>Aperture Library). The only file I can't copy is that picture, which I'm totally ok with deleting, but Finder won't delete it for me. If nothing else works, I could copy the individual masters and re-create the folders, however I'd hate to do this as I would have to go through 10,000+ pics

While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings: "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36)."

While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings: "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36).” NOt sure this is a G-Raid problem, can anyone help?

This is likely a problem with the drive itself. This error indicates unspecified I/O errors with the drive, which can be from a hardware fault, or a formatting issue. If the drive has valuable data on it, then try connecting it to another PC to get the data off, and then try fully partitioning and formatting the drive with Disk Utility. If this corrects the error then you should be able to use the drive again as it was likely a formatting issue, but if the problem continues then it is likely a hardware fault and the best solution is to be safe and replace the drive.

I have been exporting lightroom webgaleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - thoughts?

i have been exporting lightroom web galleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - and the move to the sites folder on my idisk fails..... thoughts?

Try this community: MobileMe on my Mac: MobileMe: Apple Support Communities.
And you can continue to use iWeb for some time to come. The following will explain:
It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD.

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used? So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
The value of Compressor is that it gives you control over the many parameters that affect size quality. and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
Good luck.
Russ

Tp ended with error code 0247 - addtobuffer has problems with data- and/or

Hello Experts,
If you give some idea, it will be greatly appreciated.
This transported issue started coming after power outage, sap system went hard shutdown.
Then we brought up the system. Before that , we do not have this transport issue.
our TMS landscape is
DEV QA-PRD
SED-SEQSEP
DEV is having the TMS domain controller.
FYI:
*At OS level, when we do scp command using root user, it is fine for any TR.
In STMS, while adding TR in SEQ(QA system), we are getting error like this.
Error:
Transport control program tp ended with error code 0247
     Message no. XT200
Diagnosis
     An error occurred when executing a tp command.
       Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
       Return code:    0247
       Error text:     addtobuffer has problems with data- and/or
       Request:        SEDK906339
System Response
     The function terminates.
Procedure
     Correct the error and execute the command again if necessary.
This is tp version 372.04.71 (release 700, unicode enabled)
Addtobuffer failed for SEDK906339.
Neither datafile nor cofile exist (cofile may also be corrupted).
standard output from tp and from tools called by tp:
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247

when we do scp using sm69,
SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
it throws the error like below,
Host key verification failed.
                                                                                External program terminated with exit code 1
Thanks
Praba

Data in File cannot be read or Written - Error code -36

Any clues?
Anyone?
Copying file, any file from any source, local, Drobo FW800 or USB to an external, USB HDD, Samsung 2TB Sata.
and I get the error message.
Copying the same file to any other drive works fine.
The 2TB drive cureently has 130GB and report 1.87TB free.
Have re-partitioned 'naughty drive'
Have run 'naughtry; drive through Verify and Repair - no problems
Have run 'naughtry; drive through DiskWarrior - no problems detected
Oh yes tried rebooting Mac as well.
Also, switched drive to separate bay in 4 bay DAS box.
Sounds like this drive is off for a trip to Samsung - still under warranty.
But before I do - suggestions?

Nah, no such luck.
Couple of things,
Just re-partitioned the 2TB drive into 150GB and 1.85TB
I have sucessfully transferred more than 130GB to the 1.85TB partition.
So it looks like a physical problem with the drive.
Also, my new 27inch iMac is going crazy, 15 minute boots, now only loads on drobo, Finder keeps locking up etc etc etc
Going down hard

Error Code -36 Some data could not be read or written.

When trying to copy some files from external firewire drives I am getting errors that say "The Finder cannot complete the operation because some data in "LatestCollection.mov" could not be read or written (Error code -36).
I have some Lacie 250G Extreme drives that are not having a problem, but I've now tried THREE different Lacie Pocket Drives and they all come up with this error when I've tried copying files that are of all different kinds, for Quicktime files to Quark files to a disk image.... I've tried hooking up to different firewire ports, I've tried three different firewire cords, same problem. BUT, I am able to copy some files without a problem... Just various random files won't copy because of this error. ALSO, I've used these drives on other computers and been able to copy the exact same files off without any problem.
Not knowing what to do, I repaired the disk permissions on my main drive. That did nothing.
I've combed the support discussions and come up with nothing that sounds exactly like this.
Anyone have ANY idea??

Well, Apple Care solved my issue. I'm posting for anyone else that may encounter this problem... perhaps this'll help you because I didn't find any answers in the Discussions...
They had me unplug everything from my computer. EVERYTHING, including power cord. They had me wait at least 2 minutes. We then zapped the PRAM by holding down the Opt + Cmd + P + R keys until after the third gong.
Then they told me to plug back in just the keyboard, mouse and monitor and start up. Once up they had me run Disk Utilities and repair the disk permissions for the hard drive.
All fixed.
I had repaired the disk permissions multiple times, but the key step apparently was the unplugging everything and waiting... apparently that resets some part of the computer when you do that.
Best of luck,
Rolyn

Finder cannot complete the operation because some data in.....

Hello everyone.
I burned about 10 TDK DVDr's about a month ago. I didn't get any errors while burning them and put them directly into cd cases to prevent them from getting scratches or marks. I just took them out to copy the files back to my Macbook. As soon as i start to drag and drop the files, the dvd player starts reading the files, copies some of them, and about 20 seconds in to the copy it powers down and displays the following message. This is true for all 10 of the dvds i burned. It copies to my hard drive for about half a minute...and then the drive powers down.
"Finder cannot complete the operation because some data in (NAME OF CD) could not be read or written (Error Code-36)."
Does anybody have any suggestions? I'd hate to think that all of the dvds are coasters now because i have data on them.

hi easeupjosh,
did you ever get help with your DVD-Rs?
I am having the same problem and was wondering if there's someway I can salvage the data on my DVDs?
thanks

I tried to backup computer contents, but could not because "finder can't complete the operations becaus some data in "....JPG" can't be red or written (error code-36)" What is this?

Question: I tried to backup my computer contents, cut coun't because "finder can't compelte the operation because some data in ........JPG (an iphoto image)
can't be read or written (error code -36) What is this error and how can I correct it?
Thanks,
betteyp

I am backing up on two different drives...one is on the time machine...the one I am having trouble with is a passport that I back up manually. I have not gotten a notice from the backup on the time machine that there is an error.
Before this error occured....the "event" that the photo was in emptied without me doing anything. This has happened before, when the total number of pictures that I have downloaded for the day, the events emptied overnight without me doing anything (????????)
Can you explain more what is happening.....
Thanks

Outlook 2013: Cannot insert any attachments into calendar events & tasks

Hi,
I encountered a seemingly ridiculous problem:
I cannot insert any attachments into calendar events & tasks in
Outlook 2013 on a Win 8.1 machine. Outlook simply ignores CTRL-V paste actions with files and also all drag&drop actions with files. Does anyone have a solution or similar problems?
Outlook 2013 runs using an exchange server account (Outlook.com / Office 365) on the machine.
Even if there is a logic behind this behavior, Outlook should at least inform the user why it rejects inserting the attachment.
Inserting attachments into e-mails works fine.
All 3rd party add-ins have been disabled, to avoid interference of an add-in.
Christian

Hi,
This is an known issue, you can refer to the article that our MVP Diane Poremsky wrote:
Attachments are hidden in Outlook.com tasks and appointments
http://slipstick.com/outlook/olc-hotmail/attachments-hidden-outlookcom-tasks-contacts-appointments/
My opinion is, since Outlook.com calendar doesn't support attachments, this may be expected when you are using an Outlook.com account.
Feel free to let me know if I misunderstood anything.
Regards,
Melon Chen
TechNet Community Support

Hi guys, an empty folder is stuck in my trash & I get this message: "The Finder can't complete the operation because some data in the folder can't be read or written. (Error code -36). It won't shift no matter how I try to Secure Empty trash. Any ideas?

Hi guys, an empty folder is stuck in my trash & I get this message: "The Finder can’t complete the operation because some data in the folder can’t be read or written. (Error code -36). It won't shift no matter how I try to Secure Empty trash. Any ideas?

The Time Machines Backup is formated as Mac OS Extended (Case Sensitive, Journaled), my mac is formated as Mac OS Extended (Journaled).
The names on the file are all Uppercase
When I try to copy the Aperture file, it copies about 70% of the file (it's about 33GB in size), and halfway through I get this error.
I'm able to copy 99.99% of all of the images if I open the Aperture Folder using the "show package contents" under the backups using finder (Time Machine Backups>Backups.backupdb>CQ Macbook Air>2012-04-30-070933>HD.....>Pictures>Aperture Library). The only file I can't copy is that picture, which I'm totally ok with deleting, but Finder won't delete it for me. If nothing else works, I could copy the individual masters and re-create the folders, however I'd hate to do this as I would have to go through 10,000+ pics

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

Similar Messages

Maybe you are looking for