Cannot move files without authenticating

Why can't I move files without getting the message that it needs to authenticate? Just upgraded to new iMac with Lion 10.7.4.
Thank you!

Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
Back up all data now. Before proceeding, you must be sure you can restore your system to its present state
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
chmod -R -N ~
The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
sudo !!
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
Next, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the Recovery screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Similar Messages

Cannot move files into folders on desktop

Hi, I cannot move files into folders on desktop. They won't go in when I grab them and drag them to a folder.

Take these steps if the cursor changes from an arrow to a white "prohibited" symbol when you try to move an icon on the Desktop.
Sometimes the problem may be solved just by logging out or restarting the computer. Try that first, if you haven't already done it. Otherwise, continue.
Select the icon of your home folder (a house) in the sidebar of a Finder window and open it. The Desktop folder is one of the subfolders. Select it and open the Info window. In the General section of the window, the Kind will be either Folder or something else, such as Anything.
If the Kind is Folder, uncheck the box marked Locked. Close the Info window and test.
If the Kind is not Folder, make sure the Locked box is not checked and that you have Read & Write privileges in the Sharing & Permissions section. Then close the Info window and do as follows.
Back up all data before continuing.
Triple-click anywhere in the line below on this page to select it:
xattr -d com.apple.FinderInfo Desktop
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You should get a new line ending in a dollar sign ($). Quit Terminal.
Relaunch the Finder.
If the problem is now resolved, and if you use iPhoto, continue.
Quit iPhoto if it's running. Launch it while holding down the option key. It will prompt you to select a library. Choose the one you want to use (not the Desktop folder.)

Cannot move files or folders on desktop OSX 10.7.5 MacBook Air

Cannot move files or folders on the desktop. This occurred suddenly - don't know what happened or how to undo this. Nothing on the desktop is moveable.
MacBook Air OSX 10.7.5

Take these steps if the cursor changes from an arrow to a white "prohibited" symbol when you try to move an icon on the Desktop.
Sometimes the problem may be solved just by logging out or restarting the computer. Try that first, if you haven't already done it. Otherwise, continue.
Select the icon of your home folder (a house) in the sidebar of a Finder window and open it. The Desktop folder is one of the subfolders. Select it and open the Info window. In the General section of the window, the Kind will be either Folder or something else, such as Anything.
If the Kind is Folder, uncheck the box marked Locked. Close the Info window and test.
If the Kind is not Folder, make sure the Locked box is not checked and that you have Read & Write privileges in the Sharing & Permissions section. Then close the Info window and do as follows.
Back up all data before continuing.
Triple-click anywhere in the line below on this page to select it:
xattr -d com.apple.FinderInfo Desktop
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You should get a new line ending in a dollar sign ($). Quit Terminal.
Relaunch the Finder.
If the problem is now resolved, and if you use iPhoto, continue.
Quit iPhoto if it's running. Launch it while holding down the option key. It will prompt you to select a library. Choose the one you want to use (not the Desktop folder.)

Locked Windows/Folder, Cannot Move Files On External Hard Drive

I'm running Tiger 10.4.11 on an iMac and am the only user, and therefore, administrator. I'm encountering a weird, albeit small, problem on one of my external hard drives (Seagate 320 gigs): I have boatloads of video files stored on the drive, but suddenly cannot move files into folders within the drive (I see a white "do not enter" kind of a sign over whatever icon I try to move). I can't move these files off the drive and onto my iMac's internal hard drive, either. I can only delete them. I can add new files to the drive, but then cannot move those either (can only delete them).
The folders and drive are not locked, I have read & write access, etc., so there doesn't seem to be any reason for me to be barred from moving items. Any clues? Many thanks.

Thank you for your reply and kind welcome.
That's a great tip, but that box was already checked, so I'm afraid that wasn't a solution. The problem ended up "solving itself" after I left my machine off for the day while I went to work. I may never know why that error occurred, but I certainly don't care, as long as it doesn't happen again. Take care.

Admin suddenly cannot delete files without entering password?

Admin (and sole user) suddenly cannot delete files without entering password?

Admin (and sole user) suddenly cannot delete files without entering password?

[SOLVED] Cannot move file to trash

Hi
When i try to delete files they are deleted but they do not appear in trash bin. So when i click on "Move to trash" the pop up window appear and say:
Cannot move file to trash, do you want to delete immediately?
What am i doing wrong?
Last edited by Shark (2011-03-09 08:23:27)

@stlarxh
I have already got installed gvfs. Interesting thing is that the Trash folder under ~/.local/share/Trash
have the following permission:
drwx------ 4 root root 4096 Feb 27 21:57 Trash
On Ubuntu it has this permissions:
drwx------ 5 saso 1000 4096 Sep 20 10:19 Trash
If i change permission from root to my username i can't delete files at all. Has this got something with group 1000? How can i add group 1000?
@emk
my fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
/dev/sda3 / ext4 defaults 0 1
/dev/sda1 /media/Razno ext4 users,auto,errors=remount-ro 0 1
/dev/sda5 swap swap defaults 0 0
/dev/sda3 is ArchLinux, /dev/sda1 is a custom partition.

Move files without locking down edits

In LightRoom 5 when I try to move image files (or sub-folders) to another folder I get a message that, if I continue, I will not be able to undo any changes made prior to the move. I take this to mean that moving the file will lock down any edits so that I cannot revert back to my unedited RAW file if I wish. Is this correct? If so, is there a way to move the files without locking down current edits?

I think that message is a bit ambiguous and refers to file locations, not edits. In fact if you copy folders first using your computer OS, you can safely update the folder location, without seeing the message and before deleting to tidy up the OS. It’s generally felt to be a safer method – see fig 8 on the attached link. Why not give it a try.
http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

Cannot Move Files/Folders on Desktop

One of the Mac Pros in my computer lab suddenly developed a strange behavior: I can't move any of the file or folder icons on the desktop, nor can I drag files/folders between windows or columns. They don't snap back to their original position; they won't move at all.
I can select the icons on the desktop and in windows, but cannot move them. This behavior is the same in my Admin account and a restricted student account.
I've repaired permissions with Disk Utility, and run Onyx (Optimize The System; Execute Maintenance Scripts; Clear: Application, Internet, Font and System Cache; Clean Recent and Temporary Items). I've relaunched the Finder several times, and zapped the PRAM. Restarting doesn't help.
Anyone seen this before?
Thanks,
Robert

Robert B wrote:
I'm unable to start from the Install disk; I get the "Black Veil of Death" every time (You Need To Restart Your Machine...).
Oh, well this is very much more serious than a permissions problem. I would tell you to Repair your disk, but
I can Safe Boot and choose either account. Except for the non-moving icons, the machine seems to run fine.
A Safe Boot automatically runs Repair Disk as many times as needed to fix things. Trying to start from the Install disc gives you a kernel panic, and yet you are able to Safe Boot? I don't know what could cause this.
After a Safe Boot, and in my Admin account, can I affect the changes you suggest when starting from the Install disk?
Well, not by the method I initially suggested, but you can using Terminal. But I see no point in doing that—you really need to fix the kernel panics.
However, as a temporary thing, try this.
Open the Terminal (from /Applications/Utilities) and copy and paste the following into the Terminal window, one line at a time, with a return after each line:
chmod -R -N .
chmod +a "everyone deny delete" . Desktop Documents Downloads Library Movies Music Pictures Public Sites
chmod +a "`id -un` allow list,addfile,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directoryinherit" Public/Drop Box
That will fix things for the account you have logged in with. If you need to fix the other one, you must repeat while logged in to that account

SharePoint online - "open in Explorer" - cannot move file to subfolder - access denied.

Windows 8.1, office 365 64bit.
It is suggested that webdav is not compatible with 64 Bit office.
see "Although I haven’t tested, my understanding is WebDEV doesn’t work for 64-bit Office 2013 edition." (social.technet.microsoft.com/Forums/office/en-US/newthread?category=sharepoint&forum=sharepointgeneral&prof=required)
Can someone confirm this or provide a definitive fix to the problem below?
Problem:
Using SharePoint online I browse to a Library then click "Open library in Windows Exporer."
Using internet explorer I can create a file but cannot move that file to a subfolder -> "Error 0x800700E0 - Access Denied".
The screen grab below shows error returned when attempting to move test9.txt to the CHANGE REQUEST folder.
(On my Windows 7, Office 2010 laptop I can move the file - no error).
I have googled this and completed many suggested fixes (check stay logged-in, add to trusted sites, ensure weblcient service is running, edited registry etc.

Hi,
I tested the same scenario per your post, and my environment is windows 8.1 with 64-bit Office 2013 installed.
When I accessed the SharePoint Online site library with Open with Explorer for the first time, the same error occurred when moving documents to a subfolder.
Then when I add the site to the trusted site in Internet Explorer(IE), then re-open the site in IE. And then open the library with Open with Explorer, the issue did not occur when moving documents to a subfolder.
Please make sure that the sites are added to the trusted sites in IE.
And please also check if the account has permission to move the files to subfolder in SharePoint library.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Help...Move files without changing "date modified"?

I need to move files over from my old dead g4's hard drive to my intel mac book pro - but without altering the "date modified" in my documents and folders. I've pulled them over once, but all the files get tagged with the modification date I pull them onto the new hard drive.
Are there any utilities or software or tricks to do this?
Any help or direction will be appreciated.

Robert Stover wrote:
When you say <source> is that just the name of the hardrive I'm pulling from "New 250" or is the down to the file level... <New 250>users>documents>tcpa-report.doc>
Terminal requires complete file paths in the UNIX style, using slashes between parts of the path. The root of all paths for files on mounted volumes is "Volumes" but if that is omitted the path defaults to the startup volume. Spaces separate command parts, so you must also "escape" spaces that appear in path names or they will be interpreted as command part separators. To escape a character, either precede it with a backslash ("") or enclose the entire part of the path in quotes.
So, assuming "New 250" is not the startup (boot) volume, the UNIX style path to "tcpa-report" would be:
/Volumes/New 250/Users/Documents/tcpa-report.doc
If "New 250" is the boot drive, you could also use:
/Users/Documents/tcpa-report.doc
Fortunately, you don't have to remember any of this if you use the drag & drop capabilities of Terminal. Type the command up to the place where you need to enter a path (including typing the space just before it). Then drag the item whose path you need from the Finder into the Terminal window & drop it there. The path will automatically be formatted, including any escaping needed.
If you need to follow one path with another, just type the single space that must separate them & drag the other file path into the window. Obviously, if the second path doesn't exist yet, you can't do this but you can drag the enclosing item into the window & type the final part of the path yourself. You can also use copy & paste within Terminal: copy by dragging across text with the pointer to highlight it, copy, then paste at the cursor.

Mpg to Mov Files without sound

I REALLY need to convert mpg files to mov files cause I need to use then with iMovie and FCP. But when I convert mpg to mov, the files are without sound. I'm using Quick Time 7. Are there anyone to indicate a solution or another converter app? I need mov files WITH sound.

I REALLY need to convert mpg files to mov files cause I need to use then with iMovie and FCP.
MOV is a file container. It can contain an valid combination of audio, video, text, 'Tween, Chapter, etc. data. What compression format do you want to edit in natively with iMovie or FCP?
But when I convert mpg to mov, the files are without sound.
The MPG file container normally contains audio and video data multiplexed as interspersed blocks of data in a single stream to provide spatial synchronization of audio and video. QT is based on parallel tracks of audio and video synchronized temporally. Since QT can only demultiplex and convert one track of data, it is programed to convert the video and leaves the audio out of the new file. As was previously indicated, if you wish to retain audio, you will have to use an MPEG based application. MPEG Streamclip is free and considered by most QT users to be both reliable and a standard by which other such apps are judged.
When I use that I got a file just with sound and no image. What I supposed to do?
Once again we return to the primary question of what compression format you want to edit in natively in iMovie or FCP. Most people choose DV/DV or AIC/Uncompressed but other options include Photo JPEG, Motion JPEG, MPEG-4, or H.264 with any edit compatible audio compression format. As an FCP, pro codecs are also available depending on your specific needs or wants. The compression codecs you wish to use will, in the end, determine which MPEG Streamclip conversion option you select and what settings are available.

Cannot move file to trash

Running 10.7.3 on a Macbook Air
Running Firefox browser
I have two files associated with a partial download. I cannot move to trash, and cannot rename.
Any suggestions?

First thing I would try is simply relaunch your Finder.
>Force Quite>Finder>Relaunch

How to get self-contained .mov files without FCE opening up?

Hi all experts,
I have fully rendered my first file, which is a simple text animation.
I did Export > QuickTime Movie. I am sure I tick the MAKE MOVIE SELF CONTAINED box.
When I quit FCE, I went to search for that .mov file. When I click at the file, FCE project file open up as well !!
If I copy this file for my friends, when they click at it, will they be able to see it if they do not have FCE ?
Thanks

David Harbsmeier wrote:
Sometimes it helps to change the 'opens with' info. Right-click on the file and choose 'Get Info.' In the "Opens With" box, change from FCE to QuikcTime Player.
-DH
Thanks David.
I really didn't know that there is such a thing. But hey, thanks for teaching me !!
Problem Solved.
Thanks again
Cheers

Move files without pressing down the trackpad in Lion

I just got my new 13" Macbook Air but can't move files (or windows) by "double clicking and holding" the way I could on my old Macbook Pro. In order to move something I need to press down the trackpad, or use three fingers on it. Did Apple remove this option with Lion or how do I make it work?

BEAUTIFUL!!!! HERE IS A MORE SIMPLER APPROACH
If you want to reactivate the classic double-tap-and-drag gesture, it's possible, but the option is well-hidden. Instead of being in System Preferences under Trackpad, it's actually under System Preferences > Universal Access > Mouse and Trackpad > Trackpad Options. Click the check box that says "Dragging" and you should be all set.

Cannot move file with Content & Structure feature

Hello everyone,
I have a question regarding the Content & Structure feature of SharePoint 2013.
I have people with "Design" permission level and I realized they don't have access to the action "Move" in the content
manager.
How come the button "Move" is disabled? What permissions are required to use this action?
Thanks in advance for your help

Hi,
Please understand it is by design that the issue occurs when using the site content and structure to move items within the sites or to new location. You should have higher level permission.
This is because the site content and structure uses the Content Migration (known as PRIME) export/import methods to move content. The PRIME API requires site collection admin privileges to be utilized which is why even site owner cannot move content.
I found some related articles for your reference:
http://blogs.technet.com/b/stefan_gossner/archive/2007/08/30/deep-dive-into-the-sharepoint-content-deployment-and-migration-api-part-1.aspx
http://msdn.microsoft.com/en-us/library/office/bb249989(v=office.14).aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Cannot move files without authenticating

Similar Messages

Maybe you are looking for