Cannot move the Project length marker! GB 10.0.2

Hi, I'm having problems moving the project length marker in my GarageBand 10.0.2 file.  I need to export 2 short tracks, and so I need to move the project length marker to the end of the short tracks before I export them.  But the project length marker stops at the end of the longest track even though the track is muted out...and this means I cannot move the project length marker to the proper position.  It worked fine and then it stopped working.  Please help! 

Then mark the section of the song that you want to export with the cycle region. The end-of-song marker does not matter, if the yellow cycle region is active.  Only the cycle region will be exported.

Similar Messages

  • In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries?  My Ap library is running super slow because it's overloaded l so I have created two new libraries, but can't seem to move the projects into them

    In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries?  My Ap library is running super slow because it's overloaded, so I have created two new libraries, but can't seem to move the projects into them?

    Hello Annabel,
    To move entire projects export them as Aperture Libraries, and then import those Libraries into the other Aperture Library:
    Select the Project in the Inspector, then
    File -> Export -> Project as Library
    In the other Library do:
    File -> Import  -> Library/ Project
    But I am not quite convinced, that the size of your current Aperture Library is responsible for the slowness of Aperture - Aperture is designed to cope with huge libraries.
    You may want to post your hardware setup and details of your library, and some of the hardware experts here may help you to find the reason for the slowness.
    A huge library should only be a problem, if the projects are too big, and if you have many, many smart albums at the root level of your library.
    So keep the projects small, and try to move some of your smart albums to lower levels in your folder structure (then Aperture does not need to scan all of your images to build the smart album).
    Other reasons for Aperture's slowness may be, e.g.
    An overfull system drive and/or external drive (keep at least 20% of your drives empty)
    lack of RAM
    a corrupted Aperture Library, that needs repairing
    Have you checked those options, before you split your library? It would be a pity to split it, for you would loose the ability to browse all parts at the same time, to use all your images in the Media Browser, etc.
    Regards
    Léonie

  • Cannot move the pages from one document to another

    Hi,
    I cannot move the pages from one document to another, abobe gets crashed. I am not sure but I think this was happening when I try to copy or move the threaded content. How to resolve this, this is happening in both CS4 and CS5. Can anyone help me?

    Thanks for ur reply.
    1. Open two documents, for ex doc1 and doc2, doc1 contais 4 pages, doc2 contains 2 pages
    2. Using Move Pages from the Pages panel menu in doc1, moving 1st two pages to doc2
    Move Pages  : 1-2
    Destination   : After page 1
    Move to        : doc2
    Actually I was not able to copy the textframe which is linked with another, immediately it crashes.

  • After creating a playlist, it becomes locked or frozen and I cannot move the songs around in different order.

    After creating a playlist, it becomes locked or frozeen and I cannot move the songs around in different order.

    Select the very first column header (above the numbers) and then try it.

  • My is MacBook pro is frozen and I cannot move the mouse and there is lots of batter still left.  Any suggestions?

    My MacBook Pro is frozen and I cannot move the mouse and I have plenty of batter left on computer.  Any idea on how to unfreeze mouse or computer.  Help?

    Press Command + Control + Power button and Force Restart your Macbook Pro if you do not have any Important Work open as this will Turn OFF and Turn ON your Mac and any Unsaved Data will be lost.

  • I have Iphoto library in Aperture.  Can I move the projects from iPhoto to aperture project by dragging?

    I have Iphoto library in Apeture.  Can I move the projects from iPhoto to aperture project by dragging (within the apeture program)? Is this making a duplicate of all the photos? It seems to work??  It then leaves my Iphoto library in apeture empty.  I would like to do this just to reorganize the photos between the two.  I feel that I may have doubles and would like all pictures of one year in same project in Aperture instead of going between both.

    Tell us more, please. I am not quite sure, what you want to do and how you are using Aperture and iPhoto?
    Which versions of Aperture and iPhoto are you using?
    Do you have separate photo libraries for Aperture and iPhoto, or are you opening your iPhoto libraries in Aperture?
    I have Iphoto library in Apeture.
    Did you import an iPhoto library into Aperture?  And now you are seeing a section "iPhoto Library"  in the Aperture projects list in the Inspector?
    Events and albums you imported from iPhoto (Import > Library > Some iPhoto Library) will be imported as Aperture projects and albums, and they will behave exactly as other Aperture projects and albums.
    Can I move the projects from iPhoto to aperture project by dragging (within the aperture program)? Is this making a duplicate of all the photos? It seems to work??  It then leaves my Iphoto library in apeture empty.
    You can drag images from any project in Aperture to other projects and that will move (not duplicate) the images and all its versions to that project. And when you drag all images from the project to another project, the remaining project will be empty and can be deleted.  (Caution: Photos that you have hidden in iPhoto will not be visible in Aperture. If you are not sure, if you have hidden photos, open the library again in iPhoto and unhide all photos).
      I feel that I may have doubles and would like all pictures of one year in same project in Aperture instead of going between both.
    There should be no problem with moving all photos from the same years to the same projects. You can also drag projects in "Projects" view on top of each other. That will merge them.
    You could also define smart albums in Aperture to search for images taken at a specific period of time:
    File > New > Smart album:
    Then, in the Smart Settings HUD, click "Add Rule" and add a Date or Calendar rule.
    For example, to find all images taken in 2010, use a rule "Date > Capture Year is > 2010"
    To search for Photos taken at a specific date or at several dates, use a "calendar" rule. This way, you do nat have to type the date, but can pick it from a mini calendar.

  • My iPod Nano FM is locked in one place and I cannot move the dial to the right past 90.0

    How can I unlock the FM radio on my iPod Namo dial which is locked in place at 90.0 and I cannot move the dial to the right?

    Sorry typo it had a 30 pin place to plug in the iPod Nano

  • When I try to move an email to trash,  I get a pop up window saying it cannot move the email to trash,  however; it does delete the email.  How can I stop the message pop-up?

    When I try to move an email to trash on my new Iphone 5,  a get a pop up window saying it cannot move the mail to trash.  Any ideas how to get rid of the pop up window??

    I usually get that message when I have low/weak cellular/wifi signal.

  • I can't not set Poject Start Point, as described on p 151 of manual. "You can move the project start point to an earlier position" . Can anyone do this?

    I'm unable to change the Project Start Point.   ( I can change the end point easily)
    On page 151 of the manual it states:
    "You can move the project start point to an earlier position..."
    I can't find a way to do it.   Are other able to change it. If so, please explain the procedure.

    Mmmmm,…..I just noticed this as well…….
    Anyway, try this:
    For the sake of this demonstration start a new project.
    Click the mouse pointer on the playhead in the ruler,
    now the project start indicator should appear, hover the mouse pointer above it until this indicator appears,
    when you see it left click, hold and scroll to the left.
    Good luck!

  • Cannot move the items. You don't have appropriate permission to perform this operation.

    Recently, I upgraded outlook from 2007 to 2010, but I got a problem that I cannot move any mails to personal folder and the error msg is "Cannot move the items. You don't have appropriate permission to perform this operation.".Even I create a new personal
    folder in 2010 and try to move mails to it, I still get that error message. 
    Can anyone help me out please?
    Thanks so much in advance.

    I've experienced the same thing and was unable to find this key that Tony mentioned.  After searching numerous sites, i found this instruction set below and tried it and it worked.  Per my case, the key PstDisableGrow was set to 1 under ...\Software\Polices\...
    instead.  I disabled it and bam, it worked.  Give this a try...
    Your System Administrator has either enforced a group policy to prevent pst files growing in size or a registry key is present preventing the growth of pst files. One of the following
    registry keys will be present based on your version of office (11.0 for Office 2003, 12.0 for Office 2007 and 14.0 for Office 2010). The example below is for Office 2010 (14.0):
    HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\PST  - DWord Value: 'PstDisableGrow', Value: 1
    HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\PST  - DWord Value: 'PstDisableGrow', Value: 1
    Best of luck!

  • I opened a high density .tiff file in photoshop but I cannot move the object

    I opened a high density .tiff file in photoshop but I cannot move the object

    Odds are the image is the same size as the document. You can either add canvas Image>Canvas Size... , use the crop tool and drag outwards to create more space, or reduce the size of the image ctrl-t or command-t then scale the image inward.

  • ITunes 8 - Cannot MOVE the window now!

    Since installing iTunes 8 I cannot move the window now - I can resize it no problem but it's stuck at the top of the screen just below the Finder title bar.
    Has anyone else had this and fixed it?!

    OK it's good the the cause has been identified, but I happen to love AccuBeatMix. It took me forever to find a plug-in that allows smooth fading any time I switch tracks or skip to a different position within a playing song. Hopefully there will be a fix soon. Otherwise I'd rather have a fixed window position iTunes than lose AccuBeatMix.

  • Project manager cannot see the PROJECTS even it is a part of Project Team

    Dear All.
    Describing our official scenario regarding Project Server permission mode.
    As in our project server we have business analyst person who initiate a project and he is also the project owner of that project. My query that how he can give this project in the project center of PROJECT MANAGER?
    Though i have one category in which i have mark this check "The user is on the Project's Project Team" and i have also build team in the project and assigned project manager in that team. But my project manager unable to see that project. 
    The only way is that to assign task to project manager then he is able to see the project but this one is not recommend way in our organizaiton.
    Please suggest how we can better manage the category and security permissions.
    Moreover we cannot use the status manager because status manager is team lead in our organization.
    Thanks
    REGARDS DANISH DANIE

    Hi Danish Danie,
    As Dale said, you should definitively switch to Project Server permissions mode. This will give you the flexibility you need and much more ease to maintain and administrate.
    Here is an interesting technet article to read: http://technet.microsoft.com/en-us/library/fp161361.aspx
    Hope this helps.
    Guillaume Rouyre - MBA, MCP, MCTS

  • I cannot move the sreen since some update as of 9/22/2014

    This just began and I have never had this problem before. I do not have this problem with anything else on my computer - safari, mail, iphoto etc.

    After following all the instructions given, I poked around safe websites as suggested. I am not sure why this step was needed, as websites functioned rather normally before I came here but I did it anyways and found that the websites still work the same as they did. I can still do everything I used to be able to do. I see no change in the function of the websites.
    However, I still cannot resize, close, or move the browser window. I don't know if Netflix is a safe site or not (too many conflicting opinions on that one from the masses) so I don't know if the issue with the vanishing buttons is still there, but all the issues I had with the browser window itself is still there.
    Even in safe mode the browsers three window control buttons on the top right refuse to let me use them and the window itself will refuse to be moved around.

  • Cannot Move the Slider in Videos/Podcasts

    I cannot seem to drag and move the slider while watching a music video or podcast. The pause/play and the forward buttons work, but I cannot move freely to any part of the podcast/video or adjust the volume with the slider, almost as if there was some sort of blockade. Any ideas how to resolve this? I really appreciate any tips.

    There's a weird bug in the latest version of iTunes regarding this issue. If you maximize iTunes and run it full screen, I believe you'll find that all of the video controls, including the volume slider, now work. However, if the program is minimized even slightly, the controls no longer work. I've tried this on two different Windows machine with the exact same results.

Maybe you are looking for

  • Problem using Binary wrappers in a Replicated cache

    I'd like to store my keys and values as Binary objects in a replicated cache so I can monitor their size using a BINARY unit-calculator. However, when I attempt to put a key and value as com.tangosol.util.Binary, I get the enclosed IOException. I hav

  • About cameras not mounting on the desktop in Tiger (10.4.3)

    Information for those here who have problems with their cameras or chip readers no longer mounting on the desktop. This has happened here too, with a Nikon D50 connected to an iMac G5 iSight 20". At first, I thought it was a lock file problem, caused

  • Hooking up at a hotel wireless that requires you to sign in?

    does anyone know how to hook up a wireless or ethernet apple tv (latest gen).. the wireless requires you to log in with room number before it will activate. apple tv says it wont go any further then trying to set network time.. please help...

  • Change material Type - 'MMA'

    I am trying to Change Material Type using T-code - 'MMAM'.But Message is coming PO already exist. Problem is tat we have already created GIN for the PO & Reversed the GIN also,but still PO is not getting release to Change any data.It is giving error,

  • Multilevel Service Management in SRM..

    Hi All, We have an issue with management of services in SRM. 1) Is there a possibility to manage services structured with 3 or more levels as we can do in R/3. 2) Also allow to add activities in services in SRM associated to a position (node) as it i