Cannot move Title Page using Noia 3.0.9 theme with OS X Lion; default theme is fine with FF 35

I have disabled all extensions and plugins and tested both themes and only the default theme works, with or without extensions and plugins. Short of refreshing Firefox, any other ideas out there?

I have refreshed Firefox and no change in behavior. I will pursue with Noia developer.

Similar Messages

  • Cannot move the pages from one document to another

    Hi,
    I cannot move the pages from one document to another, abobe gets crashed. I am not sure but I think this was happening when I try to copy or move the threaded content. How to resolve this, this is happening in both CS4 and CS5. Can anyone help me?

    Thanks for ur reply.
    1. Open two documents, for ex doc1 and doc2, doc1 contais 4 pages, doc2 contains 2 pages
    2. Using Move Pages from the Pages panel menu in doc1, moving 1st two pages to doc2
    Move Pages  : 1-2
    Destination   : After page 1
    Move to        : doc2
    Actually I was not able to copy the textframe which is linked with another, immediately it crashes.

  • After last Moutain Lion update, suddenly and sporadically I cannot move my files using my mouse.  I only get a "ghost" image.  Moving items to the trash is, of course no problem.  Does anyone have a solution?  I've updated my permissions...no go!

    Cannot move icon files using my mouse or cursor after installing Mountion Lion's last update.  After rebooting several times, this sometimes fixes the problem.  I've tried checking and updating my permissions, but this hasn't worked.  What's happening?  I haven't backed up so I can't go back to Lion.  Has this happened to anyone else?  What can I try?  Thanks!

    Try this:
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Now download and install OS X Mountain Lion Update v10.8.3 (Combo).

  • No longer asks if I want to delete photos on camera. I cannot move photos to trash. how do I delete them?

    no longer asks if I want to delete photos on camera. I cannot move photos to trash. how do I delete them?

    it is rrecommended that you never have iPhoto delete your photos - import them and be sure they are safely in iPhoto and then after one (or more) backup cycles use the camera's format command to reformat the memorycard and delete the photos
    As to the lack of being ask
    A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
    This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
    LN 

  • Firefox geeft de volgende melding: This page uses an unsupported technology that is no longer available by default in Firefox. Terwijl ik deze webmailsite in firefox versie 3 gewoon kon gebruiken.

    ''locking as a duplicate - https://support.mozilla.com/en-US/questions/823560''
    Firefox geeft de volgende melding: This page uses an unsupported technology that is no longer available by default in Firefox. Terwijl ik deze webmailsite in firefox versie 3 gewoon kon gebruiken. Wat kan Firefox doen om dit op te lossen, want mijn zakelijke mail loopt over die site en daar wil ik wel graag zsm weer bij kunnen.

    https://developer.mozilla.org/en/using_remote_xul <br />
    ''' "Support for remote XUL has long been a potential security concern; support for it was disabled in Gecko 2.0. " '''
    Very doubtful that the developers are going to ever reverse that decision, especially since they posted a workaround in that article and made it so that using a whitelist was possible via that extension.
    Firefox 3.6.x is available here: <br />
    http://www.mozilla.com/en-US/firefox/all-older.html

  • What does this mean? This page uses an unsupported technology that is no longer available by default in Firefox. And why cant i access my email?

    This page uses an unsupported technology that is no longer available by default in Firefox.

    I have received the same message and have been trying for 6 hours to sort it out with no success - the support system is rubbish.
    I have been unable to access my work emails since I downloaded the new version of firefox
    I can't even find out how to go back to the previous version instead of this one as I had no problems getting into my email account then

  • This is what I get when I try to log in to Advanced Interface in Knology WebMail: Remote XUL This page uses an unsupported technology that is no longer available by default in Firefox. Please contact the website owners to inform them of this problem.

    When trying to log in to Knology WebMail, I get the response "Remote XUL This page uses an unsupported technology that is no longer available by default in Firefox. Please contact the website owners to inform them of this problem." However, this is NOT a problem with Knology, but apparently, with Firefox.

    https://addons.mozilla.org/en-US/firefox/addon/remote-xul-manager/

  • User control ActiveX cannot move between objects using TAB

    I created a simple ActiveX control with 3 text boxes.
    I added it as an ActiveX object to a SAP form.
    It apears good on the screen but it seems like SAP is "stealing" the TAB keypress and therefore I cannot move between the ActiveX controls accrdinf to their Tabindex property
    It happed both in VB6 and VB.NET user control
    How it can be solved ?
    Tx Yaron

    I'm assuming you're not using a BusinessObjects reporting solution, which would mean you're posting to the wrong forum.
    Sincerely,
    Ted Ueda

  • Movie TITLE is in GRAY and will NOT SYNC with iPod

    Hi Folks,
    Just imported a short home movie into my Movie Folder in iTunes for Windows. It shows-up in iTunes just fine, and it PLAYS - in iTunes - just fine.
    Trouble is...when I sync my U2 Video iPod, the *Title for that home movie is in gray* - not black like the others. I check the box so this movie will sync, I hit sync...and it does NOT transfer to the U2 iPod.
    All other movies (titles in BLACK) transfer/sync just fine. The one in GRAY does not.
    I did try the "Make an Apple Ipod Version" i.e. Convert...and the file it creates exhibits the same behavior: it shows up in my Movie folder, I can play it WITHIN iTunes for Windows, but the Title of said movie is in GRAY when I attempt to sync and it will NOT transfer. Please help! Anyone? Thanks!

    Hi - The first one is .mp4 and then when that didn't "sync" (but DID play in itunes) I used the itunes menu choice to "convert" to ipod use...that one came out with an .mv4 extension (both files same size and both say H.264 codec in 'info').
    So,to sum-up, neither the mp4 nor the mv4 would sync to my iPod...yet both would appear - and play just fine - within itunes. Upon syncing, the title of both goes gray.
    Any ideas? Thanks!

  • Hi guys, I've been given some .mov files to use. When I play them I can hear the audio but the pictures are green. The client says they play for him. I am on mac 10.5.8 and FCP 6.0.6. Any clues as to why this is happening?

    Hi guys,
    I've been given some .mov files to use on FCP.
    When I play them I can hear the audio but the pictures are green. The client says they play for him.
    I am on mac 10.5.8 and FCP 6.0.6.
    The files details are the same as a file that will play.
    Apple Mpeg IMX 625/50
    (50 Mbs)
    720 x 576 millions
    16-bit Integer (Little Edition)
    I've been told this happened to somebody else last week, but didn't get a resaon why.
    Any clues as to why this is happening? I suspect it's a codec issue of some sort
    Cheers,
    G

    FC 6 supports 29.97 & 25 IMX frame rates but a third party plug-in is required:
    http://manuals.info.apple.com/en_US/FCP6_HD_and_Broadcast_Formats.pdf
    This plug-in costs $100
    http://www.nanocosmos.de/v4/en/products/quicktimeIMX.html
    This software is cheaper at $30 and will let you test drive it for free
    http://www.pavtube.com/guide/working-with-xdcam-imx-media-in-fcp-avid-imovie-ppr o.html
    There may be a free option available but I'm not aware of it. 

  • I cannot load certain pages using FireFox i could days ago. Pages load fine IE.

    I use google doc to link me to pages/spreadsheets for work, and i was accessing everything fine till 5 days ago. Now i am being redirected. I get a glimpse of the page/spreadsheet then it begins to redirect me with a blank screen. Disabled Java Add ons that were updated but this did not fix the issue. Attempted to view the pages in Internet Explorer and they loaded just fine. Co Workers are not having the same issue.

    Already tried that before. I don't even have any software firewall currently active, and the hardware firewall in my router does not block individual applications. It blocks ports instead, by IP address. My Avast AV software does not have anything that blocks applications either, since there is no firewall aspect to it, just the anti-virus software. Likewise, my Spybot S&D has no blocking capability either.
    I followed all the steps in the article titled "Firefox can't load websites but other browsers can" when I tried installing v24 and v25 last night, which included the steps from the article you posted above with regards to firewalls, as well as changing proxy settings, disabling IPv6 and DNS Prefetching, and resetting Firefox defaults from the troubleshooting page, which blew out all my settings, and still nothing.
    I had tried all the steps I could find on these pages, which is why I thought I would post my issue, since I had run out of ideas. I even took a look at the info about the issue some people are getting where it works for them only if they are moving their mouse, but even moving my mouse didn't get any results for me.

  • Cannot move single pages

    hi everybody,
    i am turning crazy by this. I have a finished 7 page document in front of me. now i'd like to move the 6th page in the 2nd spot - however pages won't let me do that.
    when trying to select the miniatures it shows me a yellow rectangual border and around them and i can either edit/duplicate/etc. all 7 pages but no single ones.
    what's the deal?
    thanks
    lukas

    lukas,
    You figured out my instructions even though I must have been half asleep and even on the second try gave you some misinformation. Where I said Page Breaks, I meant Section Breaks of course. So the lesson is to not try to give directions when I'm rushed, tired or trying to do more than one thing at a time.
    The bottom line for you is to use Section Breaks to isolate content so that it can be manipulated in the Thumbnails pane. Since content won't flow past a Section Break, further editing can result in pages that end well above the bottom margin. The solution is to remove the Section Breaks that you no longer need if you have that problem.
    Regards,
    Jerry

  • Cannot download master page using managed client object model SharePoint 2010

    string siteUrl = "http://server:port/sites/demo";
    string fileServerRelativeUrl = @"/sites/demo/_catalogs/masterpage/v4.master";
    using (ClientContext context = new ClientContext(siteUrl)){ FileInformation fileInfo = Microsoft.SharePoint.Client.File.OpenBinaryDirect(context, fileServerRelativeUrl);}
    File.OpenBinaryDirect() throws "The remote server returned an error: (404) Not Found" error. while Microsoft.SharePoint.Client.File f1 = web.GetFileByServerRelativeUrl(fileUrl);
                    context.Load(f1);
                    context.ExecuteQuery();this gives the file object.File.OpenBinaryDirect() works if I pass "/sites/demo/_catalogs/masterpage/TabViewPageLayout.aspx" as fileServerRelativeUrl.Both the files are present in Master Page Gallery.File.OpenBinaryDirect() doesn't work if I pass any of ".master" file in the master page galleryPlease let me know whether downloading the master pages is supported using managed Client object model. 

    Hi,
    If don't change the default config, We are unble to download master page.
    It's better to create your own (perhaps based on the default.master) and use that master page.
    also,make sure there's no a permission issue on the website.
    Thanks
    Guangchao chen
    TechNet Community Support

  • Cannot move an image using mouse (was: Hi;)

    I m trying to move a image via mouse.
    But i cant move that image.
    I wrote this;
    this.onMove(e.pageX, e.pageY);
    and took mouse position but i cant find how can i move image with X and Y coordinats.
    Can you help me pls

    Hi im using this code
    >>MySymbol.click<<
    sym.$('MySymbol').offset({
        left: 50,
        top: 20
    but it doesnt change anything. Can you help me plss

  • "This connection is untrusted" shows up CONSTNATLY!!! and I cannot move the page down to get to the bottem of I understand the risks to override it. How do I do that or how do I TURN IT OFF!!!

    Even sending this message gets the" This connection is untrusted"!!!!!How is that for stupid!!! How do I turn it off or do I have to use some other site and wipe firefox off my computer.

    Just got this warning for facebook, Amazon, and Google, I have just told my clients to stop using firefox until the problem is fixed, it is a support nightmare because you have inexperienced users calling in convinced that they have a virus on their computer, and that they need to unplug the internet to prevent anything bad from happening.
    I had one customer call in and say, "it says get me out of here, Oh my God what have I done I should never have gone online"
    You know what can we have a better more accurate statement, on that warning, like Hi, thanks for stopping by this website may be sharing a security certificate with a parent organization, it may not really be a bad thing we just wanted you to know about it before you go on your merry way. Oh and by the way were going to make you jump through hoops and clicks check boxes and do this and do that before we let you go on your merry way, wait, " Are you really sure that you want to be doing this?" Do you know what your doing, perhaps you should call your ISP for advice, and get support from someone who has nothing to do with this issue.
    Thanks Guys, appreciate all the calls, perhaps I should give them your email address. $%^$%#$

Maybe you are looking for