Cannot name a reference cell in Spreadsheet
Hi,
Does anyone have any suggestions. I am trying to name a reference cell (a single cell) which will contain a value referenced in the formulae in many other cells. This is a change to an otherwise fully functioning and useful spreadsheet. When I select the cell and access the name drop down menu the "Define" button is greyed out and remains that way whatever I try to name the cell. Is this an unfixable bug or am I just stupid! I am running Snow Leopard and Appleworks 6.2.9. I have had no other problems at all. So this is strange and makes me suspect that I am doing something wrong. The cell has not been used before so there should be no clash with any formulae. I have also checked and it is unlocked. I don't get any warning messages, the "Define" button is simply permanently greyed.
Thanks for any suggestions
I don't know what has happened here but I have just had another go and naming a reference cell and this time it worked. So it seems that there was some clash going on in my computer that prevented the function from working. Weird but solved now.
Thanks
David
Similar Messages
-
Creating formulas in Numbers - quick key to reference cells
Former Excel person, moving over to Numbers -- very simple question on how I can use keystrokes to reference cells when creating a formula, rather than typing in the cell or using the mouse. In Excel would just type "=", then could use the arrows keys to move around and go into the first cell for the formula, type "+", then arrow around to the second cell and hit Enter.
As Yvan has pointed out, Numbers offers an alternative to large spreadsheets, that being multiple tables & sheets. As you point out, moving around a large spreadsheet is not fast, even when using cursor keys (which I am assuming are the same thing as arrow keys, there being just the one set on my keyboard).
Assuming you can break your large spreadsheets down into smaller ones, you may find that navigation is remarkably quick because you can click on any table in any sheet to immediately jump to another one (even when creating cell or range references) rather than having to transverse large areas of a single spreadsheet one cell at a time.
If you are interested in exploring this approach, you may find my comments in the thread Generating values for grades useful as a description of how this can be applied when creating cell references in Numbers.
It may not be the right approach for your needs, but unless you know about it, you can't compare it to other approaches, right? -
hi
I need table name for vendor payment against the reference. For example at the time of invoice i will give reference as inv no:1 and at the time of payment i will make payment against that reference number. Now i required that in voucher printing. So please help me in which table i can get those details.
thanksHai Aarigala,
Try BKPF & BSIK Tables in XBLNR field name of Reference Number
Regards
Madhu I -
Displaying the File Name in a Cell
In version 2 of Numbers you used to be able to display the file name in a cell. If you copied a worksheet and gave it a new file name, that new name would automatically appear in the cell, so at a glance you could see which version of the worksheet you were looking at. As far as I can see that facility has gone in Version 3. Unless I have missed something?
Hi Xabianblanca,
Not *quite* as convenient but of course there is an easy partial workaround for this.
Step 1. Click the triangle next to the document title:
Step 2. Command-c. (the document name has already been selected for you).
Step 3. Select the cell where you want to insert the document name and command-v.
As for the Insert Date and Time menu pick there is a workaround that is just as easy to use as the original menu pick, after a quick one-time setup.
See the other workarounds in that thread for some of the other features that weren't included in Numbers 3.0.
SG -
How can I get current Number file name in a cell ?
I want to write current Number (3.5) file name in a cell.
It was working in previous version of Number but not with latest one. Thanks.Yes, you can click the title bar of any document (the down arrow) to access the current file name:
-
Cannot create weak reference to 'classobj' object
I am trying to run the python Script in a C# program using Iron Python I am getting this type of Error
cannot create weak reference to 'classobj' object
I am using this code for running the python code
var ironPythonRuntime = Python.CreateRuntime();
try
dynamic loadPython = ironPythonRuntime.UseFile("Program.py");
catch (Exception ex)
Console.WriteLine(ex.Message);Hi Mahesh,
About IronPython issue, It's third-party product. Please redirect to IronPython forum. The link as below.
https://ironpython.codeplex.com/workitem/list/basic
After search this error,
this thread tells me.
Try to use virtualenv. It is used to separate many instances of python and it's libraries - you can have as many virtual environments as possible: python 2.5 , 2.6 , 2.7, whatever - with any combinations of libraries - so you can have for example five
python 2.6 instances with different sets of libraries configured.
By the way, here is also a blog talking about
Running IronPython Scripts from a C# 4.0 Program
Now I will move your thread to "off-topic" forum. Thanks for your understanding.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Does anyone know how to merge cells in an AppleWorks spreadsheet?
The manual says go to the table menu and select 'merge cells.' But I can't find the table menu.
I normally use Excel for spreadsheet work so I keep looking for something like the box with an "a" in the middle.
Thanks,AppleWorks does not merge cells in spreadsheets. You can, though, get the same effect in a couple of ways.
1. Text in a cell will overflow into empty cells the right if left aligned, to the left if right aligned & to both sides if center aligned.
2. Create a floating text box to hold the text. -
I am trying to use below API:
PMString tableName = "myTable";
ErrorCode error = Utils<Facade::IPageItemNameFacade>()->SetUserAssignedPageItemName(tableUIDRef, tableName);
But this is not setting up the table name, also I am getting error = 1.
Also, I am not getting the API to get the name of table cell(which is the read only property)Hello kapoor_aman27,
a table is not a page item. The page item name is stored in the interface IPageItemName of the kDrawablePageItemBoss. So you must get the page item of your table and set the name of the page item.
Markus -
Adding lines in single cell on spreadsheet
How to add lines in single cell on spreadsheet?
i think holding (CTRL or ALT) + Enter should work? Did you try those?
-
Increase nunber of cells in spreadsheet
How do I Increase nunber of cells in spreadsheet? I open an excell spreadsheet in Apple Works and only goes up to cell number 16384. Thanks, Rob
You can increase the number of rows & columns in Format > Document… to the limits listed in the AppleWorks Technical Specifications.
-
I want to lock some cells in spreadsheet programatically.
The document is stored in Sharepoint library.
Is there any way to lock the cells?Hi,
I want to lock the cells programatically.
I have designed a web part.
I mean, end user enter the cells which needs to be locked in a textbox, and clicks a button.
On button click event, i need to lock the entered cells in a document which is in a library. -
Reference cells in other documents
I found no default way to reference cells in other documents for calculation in the present document.
Is there a way to reference cells in other documents?Hi Naikosen,
None that I know of. You can only reference cells in the document you are in.
quinn -
AdvancedDataGrid: I cannot relate the selected cells to the dataprovider
If you look at this
http://livedocs.adobe.com/flex/3/langref/mx/controls/AdvancedDataGrid.html#selectedCells
The selectedCells work fine if you have ungrouped data but when items are grouped the row index does not realte to the flat dataprovider but the grouped rows in the ADG display. This is annoying as I cannot relate the selected cells to the dataprovider.
Any ideas how to get around this?Ok so if i write some text and all the words are of different sizes and i have to resize it using the transform tool, i cannot resize it unto the size i want. e.g.. i wrote this text "The Big Bold Sale" all the words are of different sizes and are grouped together, so when i resize it using transform tool all these words are resized differently "The big" becomes big, "bold" becomes little smaller and "sale" is not resized.. the image is attached.
-
InDesign CS3: "Expected entity name for reference"
I am importing and XML file from a database off a client's Web site. When I import it into InDesign I get the following error message:
Expected entity name for reference
Line: 40, Column: 45
Nothing gets imported. What is this and is there a way to trouble shoot/fix it?
Thanks.Hi
I am getting this error in writeback while submitting
An error occurred while writing to the server. Please check to make sure you have entered appropriate values. If the problem persists, contact your system administrator.
Sax parser returned an exception. Message: Unterminated entity reference, 'M', Entity publicId: , Entity systemId: , Line number: 1, Column number: 85
Error Details
Error Codes: UH6MBRBC:E6MUPJPH
Xml parsed: <writeBack template="CPE_writeback"><record action="update"><value columnID="c0">H&M SWEDEN</value><value columnID="c1">7/5/2010</value><value columnID="c2">8/26/2010</value><value columnID="c11">Administrator</value><value columnID="c7">BOOKED</value><value columnID="c10"> y</value><value columnID="c9">H&M SWEDEN ;7/5/2010 ;8/26/2010 ;BOOKED</value></record></writeBack>
I think the problem is with '&' or might be with something else, if i choose other options form dropdowns its does not give me any error. only fot this customer "H&M SWEDEN"
can any one please tell me what workaround i can do.. the obi version is 10.1.3.2 -
I cant get my new iMac to talk to my Cannon mf4350d. Some chat sites say they never will. My latest error message is: "No destinations have been added to the [Destinations List]" I cannot find this reference in Help...
I cant get my new iMac to talk to my Cannon mf4350d. Some chat sites say they never will. My latest error message is: "No destinations have been added to the [Destinations List]" I cannot find this reference in Help...
Maybe you are looking for
-
These songs were fine when I originally bought them, they play on my computer, and even played on my old Iphone. I have deauthorized and authorised my computer serval times, but nothing seems to fix it. What do I do?
-
How to make Currency Field of IT 0009 as Uneditable in the Portal
Hi Experts, I have a requirement to make the Currency Field in IT 0009 as uneditable in the Portal. We are using transactional iView and standard Function Module to maintain IT 0009 in the portal. My query is, do I need to make changes in the FM to m
-
Long Text printing in SAP SCRIPT
Hi Experts, I have a requirement of printing long text in sapscript. There are 15 condition types for each item in sales order and one long text for each condition record. Each long text has multiple lines i.e. for one long text it may have 2 lines a
-
Limited File size uploaded to Content Area
Is it possible to limit the file uploaded as an item in the content area/folder ?
-
A while back I had two disk images on my desktop which I used for secure storage of confidential documents. When I no longer needed them I deleted both. Yesterday, while using spotlight, I discovered that both were still in existence but the path had