Cannot navigate in 3G with my IPAD after upgrading to firmaware 4.3.5(8L1)

All,
I have an issue with my ipad after upgrading the firmware to V 4.3.5 (BL1) : I cannot navigate in 3G any more even if I get a good signal.
After a while I get the message (Impossible to connect to the server)
I am using a microsim provided by an italian operator called "Tre" (http://www.tre.it/promozioni/internet-mobile/ricaricabile-per-ipad?gclid=CNXtxeD z3asCFRpggwodqCNTRw )
Note: i had no problem before of the upgrade
Reading some italian forum I saw this is a software bug and it will be apple resposability to fixing it in pacth and the issue might occurs with other operator as well
Xref http://www.iphoneitalia.com/forum/generale-iphone-3gs/75009-problema-con-rete-tr e.html
Xref http://www.iphoneitalia.com/problemi-in-3g-con-vodafone-dopo-laggiornamento-a-io s-4-3-218559.html
Anybody know anytyhing about this?
thx
tony

iPadCKQ-
You may have purchased a used iPad that someone had returned.  Perhaps iOS 5 will allow you to operate it out-of-the-box, but in that past you had to activate it using iTunes on your computer.
Or maybe someone swapped iPads with you when you weren't looking??  Try running the Settings App.  Go to Settings-General-About.  Is the Name correct or someone elses?  What version is listed there?
Fred
Message was edited by: Fred*M.

Similar Messages

  • I cannot sync my laptop with the iPad after update.

    After updating my iPad I can no longer sync it with my computer. Before the update I could sync music pictures etc. my computer says the iPad has an invalid signature. Any suggestions on how I can fix this.

    I want to add that when I connect ipad with my laptop and launch iTunes my ipad doesn't appear in devices it's greyed out...again all this worked before update.

  • Cannot you dequeue message with out namespace after upgrade to 10.1.2.0.2

    Currently we are using bpel version 10.1.2.0.0 and trying to upgrade to 10.1.2.0.2
    we have added below two lines in schema to fix the namespace issue in 10.1.2.0.0
    xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
    nxsd:version="DTD"
    This is working great and we have been using it from past 2 years.
    But the same fix is not working in BPEL version 10.1.2.0.2.
    Can anybody please tell me how to fix this issue ?

    From what I know, nxsd is native xsd and its used in FileAdapter. The subject/post line uses the word dequeue which makes me think you are referring to AQAdapter. And I am not sure if the namespace with prefix nxsd matters in AQAdapter since if there is a format issue the message gets dequeued and is stored in rejectedMessages folder. Can you explain in detail what adapter are you dealing with and your process config.
    +Dipal                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • I cant find a solution with my ipad after upgrading to ios8

    hello everybody , i upgraded successfully to ios8 and it s great but recently i found a major problem
    when i use safari web browser and write any website it s openning then directing me to a website called goodwebads.com
    what i can do to stop that problem

    go into the settings, safari and clear your cache. then  reset your iPad. Hold down the sleep and home keys for about 20 seconds. when you see the silver apple, let go and let it reboot and try again.
    If that doesn't make it go away then go back into the settings, safari and clear your history.
    Basically there's a browser hijack ad on that page and you've got to clear away the cached information to get away from it, or, unfortunately, it'll just keep running.

  • How long does verifying iPad restore with Apple take after upgrading?

    How long does verifying iPad restore with Apple take after upgrading iTunes?  It's been hours & my pc won't let me close because of it.

    Should happen immediately...are your firewalls & anti-virus software turned off? If not, turn all of that stuff of & try again.

  • I cannot retrieve the password for the wifi connection on my imac and so cannot access the internet with my ipad at home.  I have a cable modem. Help please!

    I cannot retrieve the password for the wifi connection on my imac and so cannot access the internet with my ipad at home.  I have a cable modem. Help please!

    If you mean that you cannot remember the password for your WiFi network this will work for you - or it should work if you are the administrator on the Mac.
    You will need to be logged in as the administrator on your Mac and you must know the password - Open Keychain Access on your Mac in the utilities folder, click on Passwords. Find the Airport Network Password listed on the right. Double click on it. Click on show password in the the window that pops up. Enter your administrator password when prompted and click allow.
    If Keychain is locked - you must enter the administrator password there as well to unlock it and access the password.
    If you have set the Mac up for Internet Sharing for the iPad to share the Mac's connection, just create a new network On the Mac with Internet sharing and a new password.

  • HT5858 How come i can't take video any more with my Ipad after the last update

    Howcome I can't take video anymore with my Ipad, after the last update

    What happens when you try to take videos ? In the Camera app you should be able to slide the Video / Photo / Square options so that Video option lines up with the yellow dot to their left - does that not work ?

  • Cannot locate wireless Airport hubs in Airfoil after upgrading modem and router?

    Cannot locate wireless Airport hubs in Airfoil after upgrading modem and router?  Just replaced modem and router-Airport is working for internet connection, but I cannot locate the two additional sites in my home to feed music to.  Each is connected with a Apple wireless hub.  Thanks

    To work in this configuration, you just need to setup the AX as a bridge.
    To set up the AirPort Express Base Station (AX) as a bridge, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, make these settings:
    Network tab
    - Distribute IP addresses (unchecked)
    - Apply the new setting.

  • Cannot get incoming mail on my ipad since upgrading. Can anyone help?

    I cannot get incoming mail on my ipad since upgrading
    . Can anyone help?

    Thank you so much. This solved my problem in seconds after hours of trying other ways to get it Sorted. Many, many thanks.

  • Problem with Java Script after upgrade from BW 3.5 to BI7

    Dear Colleagues,
    We're facing the issue with Java Script after upgrade of BW 3.5 to BI7.
    Just after update we checked the basic functionality and it occured that some of web templates that use Java Script don't work. They generate seelction screen, but after selection the screen becomes blank without any error messages.
    We're currently stucked since web templates weren't converted to BI7 version so they should work exactly as before the upgrade.
    We compared the Java code with other environment that was not upgraded - it's perfectly the same.
    The only explanation that comes to my mind is that some Java Script settings on the server level were changed during the upgrade but I have no idea where I can check that.
    Thanks in advance for any suggestions,
    Andrzej Bobula

    Hi Deepu,
    Thanks, it was great to read your reply and then few minutes later talk to you live on SDN Day!
    Unfortunately, http cache clean-up did not help. But there is another funny thing I found - for exactly the same 3.5 webtemplate html code returned from WebAS 3.5 was different then from 7.0.
    Unfortunately, this editor does not allow to paste complete code, even in CODE brackets, but here are main differences:
    <b>3.5</b>
       if (navigator.appName == "Microsoft Internet Explorer")
    <frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=1&REQUEST_NO=1&CMD=GET_TEMPLATE"
    name="Content">
    and
    <b>7.0</b>
       if (navigator.appName.indexOf("Microsoft Internet Explorer")!=-1)
    <frame src="/sap/bw/BEx?SAP-LANGUAGE=E&PAGENO=8&REQUEST_NO=0&CMD=GET_TEMPLATE"
    name="Content" 0nLoad="javascript:loadTitle()">
    (I intentionaly put 0 i/o o in 0nLoad, otherwise Forum's editor does not accept the text.
    How about SAP's claim that technical upgrade from 3.x to 7.0 changes nothing?
    Regards,
    Vitaliy

  • Cannot find backslash (\) on German keyboard anymore after upgrading to OS 10.6 from OS 10.5

    Cannot find backslash (\) on German keyboard anymore after upgrading to OS 10.6 from OS 10.5. It used to be at Alt-ß. Anyone can help please ?

    Never mind. Found it in an old post. It is mapped at Shift-Alt-7, really weird.
    The post is at:
    http://www.innoq.com/blog/st/2003/12/backslash_on_mac_os_x.html

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Command, Control, and Option keys no longer works with Citrix Receiver after upgrading to OSX 10.9.5

    At first my keyboard did not work with Citrix Receiver after upgrading to OSX 10.9.5 and I found the workaround by using "cmd + tab," however, once my keyboard work within Citrix, the "command, control, and option" keys no longer work.  Does anyone have a remedy for this?

    Keyboard no longer works with Citrix Receiver after upgrading to OSX 10.9.5

  • Issue with VO extension after upgrading from 11i to R12

    Hi All,
    We are facing issue with VO extension after upgrading from 11i to R12(12.1.3).
    Most of the cases we are facing issue as given below,
    oracle.apps.fnd.framework.OAException: oracle.jbo.AttributeLoadException: JBO-27022: Failed to load value at index 21 with java object of type java.lang.Boolean due to java.sql.SQLException.
    Please help me out to resolve this issue.
    Any help/suggestion will highly appreciate.
    Thanks & Regards,
    Sunita

    Hi Gyan,
    Thanks for the response.
    There is one attribute has added in VO query.
    In VO.xml file ViewAttribute definition is as given below,
    <ViewAttribute
    Name="DisplayApproveButton"
    IsUpdateable="false"
    IsQueriable="true"
    IsPersistent="false"
    Type="java.lang.Boolean"
    ColumnType="NUMBER"
    AliasName="DisplayApproveButton"
    Expression="xxh_invoice_approval_pkg.check approval(invoice_id)"
    SQLType="BIT" >
    </ViewAttribute>
    Thanks & Regards,
    Sunita

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

Maybe you are looking for