Cannot navigate ipod through alpine iDA-X001 head unit

For some reason my ipod when connected to my head unit( alpine iDA-X001) only plays a shuffle. you should be able to search for artist and songs but when your trying to access it it wont let you. maybe alpine or apple hasnt updated firmware but i dont know why its not working.

I got same trouble when connected iPhone 4 32Gb to Alpine CDE-9871 via 422i cable. But my friends iPhone 4S 16Gb work fine with this cable and head. Maybe this is 32Gb version not supported or somthing else?

Similar Messages

Alpine IDA-X001 Head Unit

I'm having the Alpine IDA-X001 fitted tomorrow afternoon and was wondering if anybody was able to tell me if my iPod Photo worked well with this head unit?

According to this thread, it works
http://forums.ilounge.com/showthread.php?t=204971
Let us know how it works for you. I'd like the 160GB so I can use my lossless collection as well.

Using the new 160gb Ipod Classic with my Alpine ida-x001

just wondering if anyone knows if the new Classic will work with my Alpine iDA-X001 head unit in USB mode? Did apple change anything in the disk mode that would make it not work? I could really use the extra room over my 80gb 5.5g, apple lossless takes a lot of room

According to this thread, it works
http://forums.ilounge.com/showthread.php?t=204971
Let us know how it works for you. I'd like the 160GB so I can use my lossless collection as well.

Alpine CDE-103Bt Head Unit and Problem with 160 Gig Ipod Classic

Hi,
2 weeks agao I brought a new Alpine CDE-103BT Head unit for my car. I have owned one of the old 160 gig classics for the last year and a half and at the time I brough the unit I was told this should all work sweet. Indeed all of the documentation from Alpine, and the Sales person, said this would not be a problem.
Unfortunately from Day one, most times after I received a phone call, while playing my ipod, the Head Unit would givesme an "Error-03" message and stop playing my music. I would then have to unplug my ipod, reset it, and plug it back in. Extremely frustrating.
The people I brought the Head Unit from are trying to say its an Ipod problem, yet I never had any problems with it and after I contacted the Australian Ipod help line they said it all appears to be working correctly. The firmware version I was on when I first tried the ipod on the head unit was 1.1.2. The Alpine manual said it should be 1.1.1 (then again you would expect them to be able to cope with updates) so as a last ditch attempt I downgraded the firmware on my ipod to 1.1.1, but it did not make a difference.
The only other thing I have noticed is that I switch the repeat and shuffle settings off when I plug in the unit, but after I unplug it after an Error-03 the Repaet function has been swtiched to all - I am not sure if this is what is causing the problem.
I am getting pretty frustrated with everything and I was wondering if anyone else has come accross this issue and even me helpful had they found a way to fix it.
If not has anyone had any postive expereinces with Alpine head units?
Thanks

Hi,
2 weeks agao I brought a new Alpine CDE-103BT Head unit for my car. I have owned one of the old 160 gig classics for the last year and a half and at the time I brough the unit I was told this should all work sweet. Indeed all of the documentation from Alpine, and the Sales person, said this would not be a problem.
Unfortunately from Day one, most times after I received a phone call, while playing my ipod, the Head Unit would givesme an "Error-03" message and stop playing my music. I would then have to unplug my ipod, reset it, and plug it back in. Extremely frustrating.
The people I brought the Head Unit from are trying to say its an Ipod problem, yet I never had any problems with it and after I contacted the Australian Ipod help line they said it all appears to be working correctly. The firmware version I was on when I first tried the ipod on the head unit was 1.1.2. The Alpine manual said it should be 1.1.1 (then again you would expect them to be able to cope with updates) so as a last ditch attempt I downgraded the firmware on my ipod to 1.1.1, but it did not make a difference.
The only other thing I have noticed is that I switch the repeat and shuffle settings off when I plug in the unit, but after I unplug it after an Error-03 the Repaet function has been swtiched to all - I am not sure if this is what is causing the problem.
I am getting pretty frustrated with everything and I was wondering if anyone else has come accross this issue and even me helpful had they found a way to fix it.
If not has anyone had any postive expereinces with Alpine head units?
Thanks

I'm trying to connect my iphone 4S to Alpine CDE-125BT head unit.

I'm trying to connect my iphone 4S to Alpine CDE-125BT head unit. I have the latest iphone IOS update (v5.1). When I connect the phone, the head unit gives me "Unit Error" which means that the iphone is not recognized. How do you fix this problem?

KitledTim, thanks for your responses. I appreciate your help.
I have more information that prove useful to others who view this post. The user manual for the CDE-125BT states that a user MUST have the ALPINE FULL SPEED Connection cable (PN KCE-433iV) to connect to the ipod/iphone (this cable is only supplied with the CDE-126BT) connected to the back of the head unit. What is more confusing is that what is supplied with the -125BT is a standard USB to iphone cable giving you the impression that it will work on the front USB port. The installers at Best Buy have seen that the front port has worked in the past but has had problems lately after the 5.1 IOS push. I went and purchased the FULL SPEED Connection cable and now audio streaming does work. The only thing that doesn't work is the ability to charge the phone when plugged into the radio.
How do you drop a line to Apple to ask about accessories (or problems with accessories)? I'm trying to provide as much info to Alpine to see if they have a solution.

IPhone 4 iOS 4.2 doesn't work with Alpine iDA-X001

I just get an error message on the head unit saying 'ipod not supported' and the iphone comes up saying 'device not made to work with iPhone' it's a different message to the one that always says' not optimized for iphone, may cause interference'
It worked fine on iOS 4.1 and below, never had a problem but started doing this weird dropping out and crackling thing when i upgraded to 4.1.2.
I hope apple can fix this cos I can't listen to music anymore in the car

There are a bunch of us that can't use our car audio headunits via usb. And a large subset with the iDA-X001 - I'm in your boat as well: crackling distortion on the last update, and now nothing, just an ipod error message.
I tried switching the cable, tried all the suggestions for resetting the phone and headunit, and plugging the cable in at different times. Even tried restoring the phone. I still get nothing but "ipod error" on my iDA-X001. I am back to using my Nano until they get this sorted. I can only hope that whatever they broke with the last update will be fixed in iOS4.3, which is rumored to be out in December.

TS1382 does the latest ipod classic play audio with video on an alpine ive-w530abti head unit

does the latest ipod classic play audio with video on an alpine IVE-W530ABTi head unit

According to the compatibility chart on this page, yes it does.
http://www.crutchfield.com/S-OhTD03kplzN/p_500IVEW530/Alpine-IVE-W530.html#detai ls-tab
B-rock

Using the Ipod with a car stereo head unit interface

I have a Kenwood stereo head unit with a kca-ip500 interface for the ipod in my car so I can control the ipod through the head unit.
I was using my mothers old Ipod Nano with it and it was great because when you turn the car off, the song would pause and then when you start your car again, the song would continue on.
Now that I have my own Ipod, the 6th generation Nano, the ipod does not automatically turn on when i start the car unless it was on not long ago. Meaning the ipod turns itself off eventually and the next day when i drive my car I have to pull the ipod out of the glove box and turn it back on. I did not have to touch my mothers ipod, it just automatically turned on for me.
Any way around this so the ipod automatically turns on when it is fed power???

http://support.apple.com/kb/HT1353
You did not answer my question, was it a firmware update for you iPod or you radio.
Firmware updates for iPods are done through iTunes, did they send instructions on how you were supposed to load it?
What was the filename?

Cannot navigate ipod

My son mistakenly changed his ipod settings to where he needs to tap three times to choose anything. Once to "highlight" the item, then doubletap to choose it. Also, we cannot scroll, or swipe!!! Help! Because of this, I am unable to "scroll" down to browse through the Settings Menu to find an appropriate fix! Ugh!

You have the accessibility like VoiceOver feature turned on.
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver andany others off off. You may have to use three fingers to scroll the screen to get there. If problems see:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)

Cannot Register Ipod through itunes

My monitor doesn't go higher then 600x800 resolution
using itunes 7.5.0.20
When I go into my itunes and click on the ipod under devices I get a screen "welcome to your new ipod" telling me to 1. register your ipod and it shows a button at the botoom to register later. I am assuming the regiser now button is off to the right where I cannot see it and I cannot get my screen to move over because there is no scroll bar at the bottom of the screen.

I had the same problem. I wasn't able to get in through these methods. Using tab only got me past the first screen to the contract page, then it just highlighted the small print. Pressing enter just saved it multiple times to my hard drive. I went into my control panel and increased my screen resolution. Then I was able to see the whole page. I know that this wont help the first person, but maybe it'll help someone else. This is so annoying. Why don't they have a scrollbar here like every other page!

Lumia 820 + Alpine CDE-183BT Head unit strange blu...

Hello al,
I had a Sony Xplod with bluetooth and everything was working fine streaming audio / phone and even the txtings where over the speakers and the Here Drive+ instructions.
Now i bought a "better" heeadunit and the most is working.
i have:
bluetooth for phone including sync for phonebook
streaming for audio
i DONT have:
Voice for naviation ??
txt messages spoken over headunit ??
I tried to reconnect / restart phone / reinstall Drive+ incl voice and maps still nothing.
HELP i need the navigation voice
I tried also both settings for the bluetooth like the advanced switch.
Nokia Lumia 820 - WP8.1 Developer Edition
Alpine CDE-183BT

Hi, Tankyspanky and Hopseflops.
Welcome to the Nokia Support Discussions!
Have you downloaded a voice for the said app? Note that you will also need to install a voice in your Windows Phone settings. Check this: http://www.nokia.com/ph-en/support/product/here-drive-plus/faq/?action=singleTopic&topic=FA141002&ca....
(Note: The above link is intended for customer's in the Philippines. For your region, go here: http://www.nokia.com/global/support/locations/.)
By the way, Tankyspanky, you can also check for the same issue in the Microsoft Developer Network forum since your phone has the Windows Phone 8.1 Preview for Developers SW: http://social.msdn.microsoft.com/Forums/en-US/home?category=wpprevdev.
If you have other questions, just let us know. Have a good one!

IPod Touch no longer working with car Head Unit since update

Hi there, I have a problem with using my iPod Touch with my car's head unit.
I've been using my iPod Touch with the Alpine IDA X001 Head unit fitted in my car for the last 3 months without any problems, however I installed the latest software update for the Touch (v4.0) and now the head unit connects and then says no USB device. At first I thought it was the cable as the cable supplied with the head unit is pretty fragile, so I've replaced it with a new one but it still doesn't work.
I've tested with my iPod Nano and it works perfectly so its not a problem with the head unit or lead (I plugged the Touch in and it didn't work, plugged the Nano in and worked perfectly and then plugged the Touch in and didn't work).
Can anyone help or is it gonna be a case of Restoring the iPod Touch back to factory settings ????

I was also having this problem with my Kenwood car stereo. I went into the store and they did a complete restore. I didn't think it worked but the next time I plugged it into my usb to connect with my car stereo it worked. So you might try doing a restore.

Alpine IDa-X100 + 2.2 Firmware = Constant frustration

I have to reset my iPod Touch just about every time I start my car as the audio signal does not pass into the Alpine iDA-x100 head unit. This happened the day I upgraded to 2.2. Now going back to 2.1 is as easy as getting the 2.1 software. Oh wait... that's right, not easy... as Apple deletes your older software when you update. Updates are suppose to be about fixing problems, if they create more, there should be an easy way of getting back. Am I way off base here?

I have the iPhone 3G, not the touch, but they're pretty similar in user experience with this head unit so I'll share what I know.
It doesn't seem to do sound check... as it's running through the dock connector but not via the iPod app on the touch/iPhone (which is disabled when connected), I assume it's pretty much reading the files directly or something to that effect, and as I recall sound checking is external to the MP3/AAC file formats.
I've noticed as well a little bit of adjustment is required! Frankly I'm just glad my iPhone works at all... had to use the cable out of the box because for some reason the white USB cable causes a "USB DEVICE ERROR" and the KCE-422i full speed cable won't charge and displays no album art AND you have to unlock the phone (don't know if the Touch has the code-lock feature?) before it would play. If anyone is using that cable and it won't play at all, try unlocking it first and firing up the iPod app prior to connection.
So using the USB cable, I've also experienced the silent-playback issue when the head unit is turned off and on again with the phone plugged in. Chances are you've turned your car off the night before with the touch/whatever still plugged in and playing, THAT is where it seems to go wrong in my experience, rather than in the morning! You do usually need to power-cycle the phone when it happens, so it figures the problem would be there in the morning. Solution is to just either rip out the iphone/touch first, or change the source on the head unit before turning the car/head unit off. Both seem to stop that happening.
Sometimes just changing the source made it work again for me, as well, but once I did have to power the iphone off/on again.

Cannot navigate through eBay listing

The problem developed 11/26. When I navigate thru ebay to list and item for sale I am taken to a page to choose the category. I select the category and click continue. This brings me back to the previous page and in red tells me to select a category. I select the category and click continue ad it brings back to the previous page and is highlighted in red to choose a category. I cannot navigate past this page.
It is only on my computer. My son does not have the issue on his computer, but if he signs onto ebay on y computer he has the same issue.
Using Safari as a browser there is NO problem and I am abe to navigate and list as I have previously done through Fire Fox before the problem began today

I've been having the same exact problem and apparently so have a lot of other people. I emailed PayPal customer service but I'm still awaiting their response...hopefully they can hurry up and do something about it because I have orders to place. This is getting ridiculous.

There are no more arrows on the tab bar so if you have many tabs open you cannot navigate through them anymore what happened to that?

I always have 30+ tabs open. Used to be there were arrows on either side of the tab bar and you could navigate to the start or the end of your tabs. Now those arrows are missing and if you have a lot of tabs open you cannot navigate, you must close a tab in order to see other ones. Or click that group tab button thing to see which tabs you have open which is stupid. Is just mine faulty? or did this function just go away. Makes no sense to not be able to scroll through and see all the opened tabs.

hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Cannot navigate ipod through alpine iDA-X001 head unit

Similar Messages

Maybe you are looking for