Cannot Open A Library File Using the 'Option' key When Launching iTunes

I found that when I tried to open a different iTunes library file then my default by using the 'option' key when lanching iTunes that the iTunes Library file was greyed out.
I looked in the previous Library Folder and noticed that the old file had the extension .itl.
My solution was to add the extension .itl to the end of the of the file name of my iTunes Library files and things then worked when launching with the 'option' key. As an example 'iTunes Terry Library' became 'iTunes Terry Library.itl'. I applied this to all my iTunes library filles and all is well. Of course make a duplicate of the file you are going to change so you have a backup file.
I am using iTunes 10.4 and Sno-Leopard 10.6.8.
MJ

No, choose library works in Windows. The thread you linked to suggested that, on OSX at least, iTunes now behaves like almost every other application in that you can open a data file associated with the application and it opens that data file rather than a different one it had opened in the past. I was hoping things might have actually changed.
In short, holding shift or option while launching the app is a very clunky way of opening an alternative library given the standard behaviour of the GUI where "opening" a data file normally opens the application that can work with it.
tt2

Similar Messages

My keyboard freezes after using the option key... what gives?

I have a 17" MacBookPro with OSX 10.6.8
The problem: My keyboard key freeze after using the " option key" in Photoshop or when downloading a file using the option key.
I can usually use it 2 or 3 times before it makes a chirping cricket like sound… then my keys freeze up.? The only way to correct it is to restart.
Anyone else have or had this issue? it's frustrating. What's the deal?

hausman wrote:
tianmiao0304 wrote:
Thanks for your explanation!
Can I just bring my laptop to the nearest service center and get this problem solved directly? You know, usually it will takes several days to receive the backup keyborad, I can't wait
You'll have to phone the service center and ask. (When I lived not far from Lenovo's Canadian service center and wanted to bring in a ThinkPad for warranty repair they said that would be OK with them but my unit would be put on a queue the same as if I'd shipped it in. They simply didn't offer walk-in, while you wait service.)
In the interim it may or may not be possible to reattach the key, even just temporarily, depending on whether it wasn't put on properly at the factory or if it's physically broken in some way. Or you could use an external keyboard until Lenovo sends you a replacement, etc.
I've just call the local service center, he told me that he can not repair individual key, they can just replace the whole keyboard..... How bad luck I am!!!

I downloaded 10.5.1 now I cannot open libraries from my external hardrive. They are not highlighted when I open using the Option key

I downloaded 10.5.1 now I cannot open libraries from my external hardrive. They are not highlighted when I open using the Option key

Hello, when you try Tylerdowner's reply make sure that you '''do not install Firefox using a limited Windows XP account''', you need sp2 and above in your xp.
thank you

IPhoto won't let me open it using the option key

When I try to open iphoto with the option key held down I get tne error message "the library is a Time Machine copy and cannot use". The only option I have is to Quit which gives me a viscous circle. How can I change to another library without opening using the option key.

Thanks for the reply.
I am not trying to use a library from a Time Machine backup. I have made a library from Time Machine by restoring it and that is the one I want to use.
It had worked just two weeks ago, but now I am getting the error message with only the "QUIT" option and the revolving circle indicating the program is trying but not suceeding.
I believe iPhoto is pointing to the pictures in my user's files - MacSSD/Users/JBL/pictures. I deleted a small iPhoto Library (7.4mb) that had been given a 3/14/14 designation and now there isn't an iphoto library in pictures. I'm not sure how that file got created, but iPhoto started last using the restored library that resides on an external hard drive.
How can I determine where iPhoto is pointing to find the library without opening iPhoto which I can't do because of the circular QUIT option?
Any further help will be most appreciated.

Fatal error C1083: Cannot open type library file: '..\..\bin\TsAdpApi.tlb': No such file or directory

Hi Folks:
I am doing one Dll file for TestStand , and got an error : d:\teststand3.5\teststand 3.5\examples\modaldialogs\mfc\tsapivc.h(18) : fatal error C1083: Cannot open type library file: '..\..\bin\TsAdpApi.tlb': No such file or directory
Could anyone help me out of that ??
Thanks in advance !

This type library for the adapter API is embedded in the teapi.dll. If you are using Visual Studio.NET, there is an attribute called tlbid that you can use with the #import directive in order to import that embedded library (see the MSDN documentation for more details). For example:
#import tlbid(2)
In VC++ 6.0, there is no way to import embedded type libraries. Therefore, you must use the attached type library file (.tlb) with the #import directive. For example:
#import "TsAdpApi.tlb"

I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5. I changed the name of the first library to iPhoto library 1 and now I all my photos are gone. My operating system is Mavericks.

I just created a new iPhoto library with holding the option key down and then opening iPhoto with version 7.1.5. I changed the name of the first library to iPhoto library 1 and now I all my photos are gone. My operating system is Mavericks.

launch iPhoto wile holding down the option key and select the original library - when you create a new library of course it is empty
And you seriously need to backup your iPhoto library and purchase and install iPhoto '11 version 9.5.x from the App store and download and run the iPhoto library upgraded \then run the new iPhoto - 7.1.5 is not fully compatible with Mavericks
LN
PS you also need to update your profile - it states that you have OS X 10.6.8

Firefox Sync: I cannot log into my account using the sync key that was given to me and nothing I do seems to fix it. Is there anyway I can "reset" my username? I'd like to reopen an account using my same username as opposed to starting from scratch.

I cannot log into my account using the sync key that was given to me and nothing I do seems to fix it. Is there anyway I can "reset" my username? I'd like to reopen an account using my same username as opposed to starting from scratch.

reading through that, it doesn't look like you were given up on Candice. you never replied to StarDeb's last set of questions in that thread. she was probably waiting to hear back from you.
why didn't you reply?

Boot camp and windows XP..can't use the "option" key to dual boot

Hi All
I'm a Mac newbie, but I know LOTS about windows XP. I set up windows XP to run on my brand new (5 days old) macbook. I can use bootcamp to boot from OS/X to windows XP, and everything works well o both systems (I also loaded fusion, didn't like it cause I had to keep activating Microsoft Office 2007 everytime I switched from the VM to the bootcamp method of accessing XP).
My question..when I hold down the option key when I turn on the computer, only the Mac hard drive appears, not the windows...so, I boot into OS/X and then switch to windows from there. Any ideas why the option key only gives me the Mac HD option?
Thanks

In terms of AV, I'm running Mcafee AV and firewall, if that's any help knowing..I don't know if the AV changes any boot record, etc. Also, interesting when I go to the boot camp control panel when I am in windows, both "hard drives, Mac and windows" show up as folders. When I go to the control panel in the Mac OS, the Mac HD shows up as a hard drive, and the windows shows up as a folder. So...who knows!
As for using Vista vs. windows, well, I haven't worked much with Vista, but, since many of us that need windows use programs that may not reliably work with Vista, I have stuck with XP.
As for the use of Fusion, my point was this. I put the trial copy on and then loaded office 2007...each time I started the windows boot camp partition, or the fusion VM, I had to reactive Office 2007...this is a known problem in fusion VMware per their discussion board on the site. If you load fusion AND the fusion tools before activating Windows XP, then you only have to activate windows twice, once in bootcamp and once in fusion, but you have to look for the fusion tools and load them, they don't load by default.
Thanks for the OS dual boot software suggestion, I'll check it out...this is not a huge problem, but, when the Apple engineers respond to my question as "hmmm...we don't know"...I'm a bit concerned. So, as an old time windows user who just switched to Mac, my initial take it...both systems have their problems, just a different set of problems...but, so far I love my Macbook.

HT1379 I am trying to reset NV/RAM PRAM and am instructed to use the option key. I cant find an option key on my keyboard. Does it have another name?

I am trying to reset NV/RAM PRAM on Apple website and I am instructed to use the options key. There is no options key on my 2008 keyboard. Does it now have another name?

Step by Step to fix your Mac

Holding down the option key when booting my iMac lo longer shows me my bootable external drives, the system just boots up to the main system. Also, holding down command, option,P,R no longer zaps the p-ram. the system just boots up.

Holding down the option key when booting my iMac lo longer shows me my bootable external drives, the system just boots up to the main system. Also, holding down command, option,P,R no longer zaps the p-ram. the system just boots up normally. Why do these key fonctions no longer work?

It could be your timing if on a bluetooth keyboard. I find it best to hit the keys as soon as i hear the chime, release and hit them again but this time holding them before the chime ends....like a fake pump in football.
But....you can always open up system preferences, startup disk, and select your bootable clone for booting. If it doesn't show up there, the Mac doesn't think it's bootable.

Why my Startup Manager does not appear when I hold the Option key when starting to boot.

I no longer have the Startup Manager appearing when I hold the Option key when starting to boot.
Instead, the system just boots into whichever OS was last selected in the Startup Disk Preference.
How to get back my Startup Manager so that I can boot up from my external hard disk.
Thank you.

Can you please run the following in terminal and post the output in your reply:
diskutil list; echo; nvram -p | grep boot-args; echo

I have a Seagate 2TB external hard drive partitioned with one partition of Snow Leopard (my computer is running Lion). Can't seem to reboot using the option key. Any ideas as to what's wrong?

I have a Seagate 2TB external hard drive with 3 partitions, one for Snow Leopard - my computer has Lion. I cannot seem to boot from this hard drive but I could yesterday. Any ideas?

Didnt help. The night I asked this question I was able to reboot from the external hard drive after running Disk repair (which said everything was fine). Tonight I have tried again and cannot boot from the external. So I tried the Safe Mode restart and then chose restart with the option key held down as well as shutting down and trying holding down the option key while turning on the power. I have never been able to reboot just choosing restart and holding down the option key. Whenever the reboot from the external has worked I've had to shut down and hold the option key while turning the power on. Now that is not working. My computer is brand new as is the hard drive. I don't know where to go from here.
I can access the drive just fine while I'm in Lion. I just can't boot up using it. Help!

Hi, my MacBook Pro cannot open Safari. nexpectedly while using the librooksbas.dylib plug-in" the report details the exception code as 'EXC_BAD_ACCESS (SIGSEGV)' and exception codes as: 'KERN_INVALID_ADDRESS at 0x0000000920

Hi, my MacBook Pro cannot open Safari. It crashes and gives the message, ' Safari quit unexpectedly while using the librooksbas.dylib plug-in" the report details the exception code as 'EXC_BAD_ACCESS (SIGSEGV)' and exception codes as: 'KERN_INVALID_ADDRESS at 0x0000000920

Remove "Rapport" by following the instructions on this page.
Back up all data before making any changes.

I can't view/open attachments unless I use the option "view in classic reader". This is very unhandy. Any ideas on how to fix? Version 31.3.0

I use Thunderbird (Ver 31.3.0) for several email accounts and on my main account only, it rarely shows the attachments in the email. There used to be a button to click on to either "preview", "open", or "save" ("preview" option is only for pdf attachments). That whole menu bar is gone. But only on my main account, the other accounts all work okay. The only way that I've found to be able to get to the attachment is to use the "view using the classic reader". Then I have to click on the attachment and it downloads it and opens it up. I'd like to get the options back without having to do all the extra clicking to get to the attachments.
Thanks!
~Konce

Yes, when I disable the conversations add-on, I can then get to the attachment...but I like the conversations add-on otherwise and it used to handle the attachments just fine.

Cannot open Photoshop CS4 files using Photoshop 7

Hi - I would be very grateful if anyone has solved this problem before and can help me.
I am trying to send a smallish (5 Mb) layered CMYK Photoshop file from my version (CS4) to someone who is still using Photoshop 7 but they are completely unable to open it. I have saved it using 'Maximize Compatibility' and there are just 3 layers, no fancy layer effects, no layer sets, and each layer has a transparent background. Every time the other person tries to open it (via File -> Open), their Photoshop hangs and they have to force quit. It will open in Graphic Converter but it is then saved as a flattened image which is no good. I'm at my wits' end what to do to get this to open in PS7 - does anyone have any ideas?
I am using Photoshop CS4 on a Mac Pro, OS X 10.6.3; they are using Photoshop 7 on a G4 867 DP, OS X 10.4.11.
Thanks very much -
Deb.

If anyone else should come across this sort of problem, here's the scoop:
It's a metadata parsing bug in Photoshop 7 and CS/8 (version 3-6 no problem, version 9-12 no problem). It is caused by the history metadata in the file, possibly because of the length of the history, possibly because of the InDesign history bits. I don't have a MacOS 10.1 system avaialble to debug Photoshop 7 any more, so I can't be positive about the exact cause. But we know that Photoshop CS2 and later work just fine.
If you wait 30 minutes, Photoshop 7 does eventually load the file. But that hurts productivity.
The history metadata can't easily be deleted in Photoshop (or ImageReady, Fireworks, etc.). But if you copy the layers to a new document, the history metadata won't be carried over. Save the copy, and that copy will work just fine in Photoshop 7 and CS/8.

Cannot Open A Library File Using the 'Option' key When Launching iTunes

Similar Messages

Maybe you are looking for