Cannot open a raw file from my Nikon D800,,,i have downloaded every and i mean every version of raw

i am up to raw 8.3,,still getting an error message,,,frustrated,,,but still shooting in Tiff,,,would love to see a raw file open

Unreadable on my computer. I also use a D800, so I know my computer can read them.
Opening it up in a binary editor, I see the magic words "Nikon Transfer 1.1", which you've already been asked about twice.
You need to update this software, or use something else. Old versions of Nikon Transfer are known to corrupt recent Nikon cameras' files.
Read these:
https://nikoneurope-en.custhelp.com/app/answers/detail/a_id/53027
https://nikoneurope-en.custhelp.com/app/answers/detail/a_id/50878
for info on updating or disabling it.
You will need to download the raw files from the cards again, once you've fixed the problem.
Personally, I stick my cards in a card reader and use Adobe Photodownloader, which is part of Bridge (which comes with Photoshop).

Similar Messages

  • Firefox will not open Adobe PDF files on my mini Mac (I have reader x and the latest Quicktime versions)

    When I try to download a pdf file sometimes an error message appears and states can't down load file, Quicktime may need an extension. Other times the page just stays blank - nothing happens.
    This happens very frequently. I can open some pdf files in Firefox. The problem appears with downloading.
    I have the same software in Safari and Firefox and I do not have this problem with Safari - I can download PDFs in that browser

    What I did was to reinstall/upgrade Adobe Reader, then there is an new option showing up in Firefox > options > applications > Portable Document Format(PDF), which is "use adobe acrobat in Firefox". Choose this one, then I managed again to open PDF files with Adobe Reader internally in Firefox.

  • I just installed Camera Raw 8.7.1. It put the folders in a "Pug-Ins" folder under \Programs\Common Files. My Photoshop CC 2014 is in \Programs\Adobe\Adobe Photoshop CC2014. When I try to open a NEF file from my Nikon D750, CC 2014 says it cannot open it;

    I just installed Camera Raw 8.7.1. It put the folders in a "Pug-Ins" folder under \Programs\Common Files. My Photoshop CC 2014 is in \Programs\Adobe\Adobe Photoshop CC2014. When I try to open a NEF file from my Nikon D750, CC 2014 says it cannot open it; it is an unsupported file type. So what do I need to do? TIA, Rob

    *** Moved to Photoshop Discussion Thread ***

  • I am having trouble opening .nef raw files from a nikon d800 in elements 9.

    I am having trouble opening .nef raw files from a nikon d800 in elements 9.
    I have tried to update ACR to the latest version but can not tell if this has been successful
    I just get the message "wrong type of file"

    For the D800 you have two alternatives:
    (1) Upgrade to PSE 11. (2) Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
    Windows download click here DNG Converter 7.3
    Mac download click here DNG Converter 7.3
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Can't open NEF files from my Nikon D800

    I am running Mac OX 10.6.8, Photoshop 13.6.1 x64, Camera Raw 7.1.0354 and Lightroom 4.4.
    Now Camera Raw and Lightroom won’t open raw files from my Nikon D800. Why is this!??!?
    My iMac is model year 2006 and can't be upgraded to Mavericks (thank you Apple!)

    1.— First, be glad your machine can't run the extremely buggy Mavericks OS. 
    2.—Did you mean Photoshop 13.0.6 ?  There's no such thing as Photoshop 13.6.anything.
    3.— The current version of ACR is ACR 8.4.  You should ALWAYS update to the latest version.  Once a camera model is supported, it will be supported in all subsequent releases of ACR.
    Beside new camera support, each ACR update contains any number of unannounced, unheralded bug fixes, improvements and enhancements.

  • Unable to view SAP Help files --Cannot Open Frameset.htm Files from 'help.s

    Unable to view SAP Help files --Cannot Open Frameset.htm Files from 'help.sap.com'
    Open Internet Explorer
    Types in http://help.sap.com/
    Click on mySAP ERP
    Click on English
    The webpage goes to
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
    It shows the status done but what I see is just a blank page
    I tried going to different areas of SAP Help files but no success
    I cannot even open Help on Help http://help.sap.com/saphelp_erp2004/helpdata/en/3f/a42938955df162e10000009b38f842/frameset.htm
    None of the other users have this issue

    Hi
    I am able to open your links. I think there is some problem in your internet explorer. please check
    regards
    Srinivas

  • Will Photoshop Elements 11 and Lightroom 4 support conversation of RAW files from a Nikon D800?

    I'm currently using Photoshop Elements 9 and must convert RAW files from my Nikon D800 to .dng files before processing using a added converted.  I'm considering upgrading to either Elements 11 or Lightroom 4 but want to know if either of these programs will support the nikon D800 RAW files without having to go through this extra cumbersome step.   Additionally, if I do go with Lightroom 4, will the transition be easy or difficult and what problems might I encounter?

      Yes the D800 is fully supported in both applications.
    You would certainly benefit in processing your 36mp raw files using Lightroom if you have a 64bit PC or Mac with additional memory (RAM). The Lightroom develop module is where you do all the editing and you get the benefit of the full CS6 raw engine in an intuitive interface.
    If you regularly use the Elements Organizer you should understand Lightroom quite easily.
    Why not download the free trial of LR4 and test for 30 days.
    http://success.adobe.com/en/uk/sem/products/lightroom.html?kw=p&skwcid=TC|23077|lightroom| |S|b|21212135254
    P.S.
    There is a good video tutorial from Adobe’s Julieanne Kost - Create Stunning Images.
    http://tv.adobe.com/watch/getting-started-with-adobe-photoshop-lightroom-4/lightroom-4-cre ate-stunning-images/

  • I can't import the RAW files from my Nikon D800.

    I can't import the RAW files from my Nikon D800.

      Go to the editor on the menu click:
    Help >> Updates…
    Install Camera Raw 6.7 if you have PSE10.
     

  • I have LR2 but not able to access nef files from my Nikon D800

    Unable to access nef files from my Nikon D800.

    You need Lightroom 4.1 or later (the current version is 5.7.1 but will not run on Windows Vista or XP and certain Mac operating systems, if that's an issue)
    You could also download the FREE Adobe DNG Converter version 7.1 or later and convert your RAWs to DNG and import those into your Lightroom 2.

  • Greens from my Nikon D800 are way over saturated and too bluish  14 bit NEF

    Greens from my Nikon D800 are way over saturated and too bluish 14 bit NEF uncompressed files. I have no problem with raw files from other cameras is there a setting I am missing somewhere?

    Hi,
    I have been shooting my D800 for over a year now, and I have not observed what you are discussing, particularly in outdoor, natural light situations.
    I have downloaded your NEF, and imported it into Aperture (3.4.5).  I notice two things right away:  1) you are using Uncompressed NEF, 14 bit recording;  and 2) you seem to have a custom White Balance.  The former should be of no matter, but would be interested if you have been able to discern any advantage over Lossless Compression, 14 bit?
    However, the important concern is with the Custom White Balance impact on the rendering of NEFs in RAW in Aperture.  I am planning to do a study of this, and am wondering if you could test your resutls in similar shots with Auto White Balance rather than any preset (yours or the camera standard presets)?
    I by practice only shoot Auto White Balance (and RAW), but recently I have found benefit to using a preset WB when shooting video since that result will not be modifiable later on the computer.  After doing this, I have sometimes forgotten to reset the WB to Auto before again shooting stills in RAW, and the resulting difference vs once reset has been curious.
    While it is well known that Picture Controls when used and shooting RAW will likely result in wide differences between the Camera Preview and Aperture's first rendering, I am less certain what the dynamics of White Balance settings and first rendering in Aperture.
    Thanks for the test image and chance to discuss this.
    Ernie

  • DNG doesn't recognize raw files from my Nikon D800

    When I open DNG (v 7.1.0.354) and go to the folder my raw files are in the files are "grayed out." The files came from a Nikon D800. I want to use the files in Photoshop 5 (v 12.0 x64.) The camera raw plug-in currently inside Photoshop 5 is v 6.0.0.205.
    Advice ?

    Your camera is on the list of supported cameras for the latest DNG converter. It is also on the list of supported cameras for Camera Raw 6.7, which was the last update for Photoshop CS5. I cannot confirm that support because I don't have a D800. Is the DNG converter that you have the release candidate or the beta version that was out at one time? You might check for the latest updates and see if that makes a difference. I would also recommend that you update to Camera Raw 6.7.

  • I cannot open any pdf files from internet with this reader.

    I cannot open any pdf files with this reader, please advise.

    What is your operating system?  What is your browser?  What is your Reader version?  What exactly means "cannot"?

  • I have done the latest updates on my photoshop, it is version 14.2.1. What I try to open a file from my Nikon D800 camera NEF file, I get a message saying Photoshop cannot open this file.Can anyone help me with this?

    The message says Ïf you are attempting to open a RAW file, make sure you have the latest update installed. I have completed all the latest updates today but still get this message.

    Sorry to hear your Adobe experience has been less than stellar.  I'll try to help...
    1.  Photoshop 14.2.1 is now two releases out of date.  You might want to go to your Creative Cloud application and ask it to install Photoshop CC (2014).  Earlier this year Adobe released 2014.0 as a separate install that can live side by side with 14.2.1.  Then just a few days ago they released 2014.1 as an in-place upgrade to 2014.0.
    2.  You may be able to update Camera Raw directly to version 8.6 by a link from this page:
    Keeping Photoshop Up-To-Date
    Best of luck to you.  Please let us know here if these things help.
    -Noel

  • I have iphoto '08 version with an imac osx 10.5.8. It will not read my RAW files  from my Nikon D800 - a very new model.How can I get it to read my RAW files?

    my somewhat old imac osx 10.5.8 with iphoto '08 will not read my RAW files from my new Nikon D800 camera - a new model on the market( 5 months or so). How can I get iphoto to read my RAW  files?

    iPhoto 08 would not read RAW files from that new a camera. You need to upgrade so you can get more up-to-date version of OS X and iPhoto. Another possiblity is see if iPhoto 11 will run on 10.5.8, if so you should update. You can also attempt to run Software Update and see if it finds a newer release of iPhoto 08 that supports newer RAW formats.

  • Cannot Open .MOV Quicktime Files From Drive

    Greetings All!
    Can anyone tell me why I cannot open files from my secondary hard drive?
    I have two hard drives in my computer both are internal, one is 160Gb used for XP and other programs and the other is 250Gb used as a mass storage device for misic, pictures, video etc. However when I try to open any of the QT files that my digital camera creates I receive the following message:
    Couldn't open the file "138810" because an unknown error occurred. The
    number of the error is: -8971
    My operating system is Widows XP MCE
    Computer: Compaq Presario Desktop SR1950NX
    RAM Memory: `1Gb
    Hard Drive 1: 160Gb
    Hard Drive 2: 250Gb
    QT Version 6.5.2
    If you need any other information please dont hesitate to ask!
    Elaine Beauxrauxgard-Weiderhoff

    I've had a problem in the past with opening .mov files from a second hard drive which was caused by the drive being named in a way QT could not recognize it. The drive was named (F:\F:\) when changing the drive letter to a single(F:\). QT was then able to recognize and play. But that was generating a, error 43 file could not be found. So you might still want to check how the drives are named.
    I read that error 8971 can be a need to update QT,but don't know how accurate the info is. If you do update from QT6 to QT7 and are using QT Pro you'll have to purchase a new key

Maybe you are looking for

  • Having trouble putting songs/playlist on ipod

    Not sure what to do, trying to add songs and playlists to my ipod but its just not working. It keeps coming up 'songs on the ipod cannot be synced because all of the playlists selected for syncing no longer exists'. How can I get it to work? thanks a

  • Why can't I open my pdf document in Pages?

    I want to open a pdf document in Pages, but is will not let me select it. How do I do this?

  • Profit Center derivation in Sales Order

    Dear Gurus I have a requirement where profit center should be derived in sales order on the combination of customer country and plant. In standard SAP it can be defaulted at plant level from material master. How can this be defaulted on Customer coun

  • Use new hdd to increase space in specific folder?

    Hey guys, I just installed a new 2TB harddrive and I have an old 300GB drive where all my downloaded TV shows go. Now those 300GB are never enough and I want the folder where the 300GB drive is mounted in (~/down) to be bigger. Naturally, the simples

  • Dynamic editable functionality in Adobe form

    Hi All, I am Calling a Interactive Adobe form from webdynpro view. second applicant(SBPID)--Read only               second applicant name(SNAME)-Calculated read only I have created Action on second applicant ID (SBPID) ---If SBPID is not empty disabl