Cannot open a report in CrystalReportsXIRelease2

Hi,
I am getting the following error message on opening a particular report in "Crystal Reports XI Release 2".. On selecting a report from the file browser I get the message
"The report could not be opened from Business Objects Enterprise. Possibly the report is on a different BusinessObjects Enterprise system than the one you are currently loggedo nto".(also I cannot see the report in the file repository pane but I can see it when I browse using File-> Open. I open it from the file browser).
Some reports are opening fine. I think this report used to open witjout any error in "Crystal Report XI" . But after I installed the release2 this issue has started. I donot have the installable for the older verison anymore.
Can someone please advise why is this issue occuring how to get this resolved?. greately appreciated.
Thanks,
Reeti

Hi Reeti
Please open those reports from Crystal Reports Designer and publish them (Save in the Enterprise) once again to XIR2.
Also check the differecne with the reports which are not throwing any errors.
Hope it helps!!!
Regards
Sourashree

Similar Messages

  • Cannot open a report I just saved via Save a Dynamic Template

    Hi All,
    I am on BPC 5.1 SP9, working in Office 2007.
    The problem is happen sporadically, where I save a report using Save a Dynamic Template.  Then try to open up the report I just saved, and the report does not open.  Sometimes if I resave the report via Save Dynamic Templates, I can reopen up the report.  If that does not work, I go back into Save Dynamic Template, and save it to a new name, and see if I can get the report to open.
    The strange thing is I can save the report to my desktop, then go into BPC.  Every time I open the report from my desktop it always runs.
    Not sure if anyone has seen this before?

    Does your template have an Excel 2007 4 digit extension? 
    There is a known issue with BPC 5.1 sp7 or higher service pack and Excel 2007 format extensions (SAP Note 1347243)
    Files with Excel 2007 Extension such as XLSX and XLTX, (saved and opened repeatedly via eTool -> Save / Open Dynamic Templates menu) may have issues where the template will not open.
    The problem does not exist with BPC 70M sp3 or higher. 
    The note also has a possible workaround; suggesting renaming the template on the File Share Server and then opening the re-named template via Open Dynamic Templates menu.
    Hope this helps.

  • Cannot Open Crystal Report

    Dear All,
    We set crystal report group and assign all crystal report for each group.  When they try to run the report, there's an error message: "you're not authorize to view or print this report".
    How do we solve this problem?
    Thanks and Regards,
    Lailus

    Dear Gordon,
    I've been through those process, create user group, assign users to the group and assign CR report to the group.
    Btw, user type is normal user not super user.
    Regards,
    Lailus

  • Firefox cannot open crash report is seen

    Crash ID: bp-4d42ff7c-7f81-43e8-b77d-684782130512

    hello sourajeet.sarkar2, please start firefox in safemode (by pressing the shift-key while it is launching) & go to ''firefox > options > advanced > general'' & disable hardware acceleration.
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • Unable To Open Financial Reporting Reports In PDF In EPM Workspace in 11.1.2.2

    Hi All,
                   We have FR 11.1.2.2 running on AIX and we recently apply a patch 11.1.2.2.303 to this FR 11.1.2.2. As a pre-req we have also apply the patches for HSS and workspace. Now after applying the patch we cannot open the reports in PDF mode in workspace however we can open the reports in HTML mode.
    Can anyone help on this!!!
    Thanks,

    Hi,
    Create a folder named Temp in the root of C: (to match the xdo.cfg file).
    - OR -
    Edit the path reference in the xdo.cfg file with a valid directory.
    - OR -
    Remove the applicable line entry from xdo.cfg file:
    1. Navigate to the applicable path (the default is Oracle\Middleware\EPMSystem11R1\products\financialreporting\lib\FOProcessor).
    2. Open the xdo.cfg file in a text editor.
    3. Remove the following line then save the file:
       <property name="system-temp-dir">c:\temp</property>
    4. Execute the FR reports in workspace with PDF preview to validate the results.
    Note: Save a backup copy of xdo.cfg before modifying it.
    regards,
    Harish

  • Error when open Oracle Report Builder 10g (Windows 7 Ultimate 32-bit)

    Hi all,
    I installed Oracle Developer 10g on windows 7 ultimate 32bit.
    Form builder running well, but the report got problem when i opened.
    This is the error message:
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: rwbuilder.exe
    Application Version: 10.1.2.0
    Application Timestamp: 42ea43b7
    Fault Module Name: ROS.dll
    Fault Module Version: 10.1.2.0
    Fault Module Timestamp: 42c3b2b7
    Exception Code: c0000005
    Exception Offset: 0000afaa
    OS Version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Can anyone help?
    Regards,
    eRie

    Hello,
    For installing Developer suite 10gR2 on windows 7 there are some special installation steps.
    Please make sure that i hava followed them as described in the metalink note:
    Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit) (Doc ID 1292919.1)
    Also be aware of the following issue:
    Cannot Open Forms/Reports Within Forms/Reports Builder 10gR2(10.1.2.3) on Windows 7 (Doc ID 1306651.1)
    Regards,
    Alex

  • Cannot open analyzer???

    Hi all,
    I use Windows XP profesional, and office 2002.
    I have installed business explorer, but I cannot open a report via Analyzer. I also tried enter the BI system, run transaction RRMX and when it open the XL (it is in Greek) the open folder button does not operate, does not open any folder to choose a report to open, and also it is displayed within Greek windows in German Language.
    Any clues???
    Thanks in advance

    Is your question regarding SAP Business One?  Please post it in the proper forum if it is not.
    Thanks
    Gordon

  • Any Mozilla product I install crashes at startup. The first window I see when I open a Mozilla product is the crash reporter. I have tried every possible solution but cannot open anything. It started with firefox. Can anyone please help?

    Hi there, as the question says, I cannot open any Mozilla product. I have tried to install firefox 3.6, older versions of Firefox, Firefox 4.0, Sea Monkey, Thunder Bird and Sun Bird. I have the same problem everytime. I open any of these programs and the first and the only window that appears is the crash reporter. I've tried opening it in Safe Mode and the same occurs. I have tried entirely uninstalling the products incuding the registry keys but no help. I shall post the detailed error reports, if they help solving this issue. Can you kindly look into this and find a solution as I use all of these Mozilla products and my life has been a hell since they've ben down.
    Seamonkey Error Report:
    Add-ons: [email protected]:2.0.4,{59c81df5-4b7a-477b-912d-4e0fdf64e5f2}:0.9.85,{f13b157f-b174-47e7-a34d-4815ddfdfeb8}:0.9.87.4,[email protected]:1.0,{972ce4c6-7e08-4474-a285-3208198ce6fd}:1.0
    BuildID: 20101123124820
    CrashTime: 1296412292
    InstallTime: 1296412283
    ProductName: SeaMonkey
    StartupTime: 1296412291
    Theme: classic/1.0
    Throttleable: 1
    URL:
    Vendor: Mozilla
    Version: 2.0.11
    This report also contains technical information about the state of the application when it crashed.
    Sunbird Error Report:
    Add-ons: [email protected]:1.2009p,{e2fda1a4-762b-4020-b5ad-a41df1933103}:1.0b1,{972ce4c6-7e08-4474-a285-3208198ce6fd}:2.0
    BuildID: 20091211101839
    CrashTime: 1296413028
    InstallTime: 1296411446
    ProductName: Sunbird
    SecondsSinceLastCrash: 1578
    StartupTime: 1296413025
    Theme: classic/1.0
    Throttleable: 1
    URL:
    Vendor: Mozilla
    Version: 1.0b1
    This report also contains technical information about the state of the application when it crashed.

    Did you find a solution?
    Same problem over here as well, FF 7 is ok but FF8 / FF9 and Thunderbird 8 / 9 crash on startup.
    They both work if I start them in safe mode with everything enabled.

  • The Microsoft Access database engine cannot open or write to the file in Report Builder 3.0

    I am trying to build a report in Report Builder 3.0.  I created the Data Source to point to my Excel file and the Data Set.  I drag a couple of fields on to the canvas and then choose Run.  I get the error:  "The Microsoft Access
    database engine cannot open or write to the file.  It is already opened exclusively by another user".  I am using the Excel driver.  Why am I getting this message?  How can I fix this?

    No, now I am getting the error message again.  It is quite long:
    ERROR [HY000] [Microsoft][ODBC Excel Driver] The Microsoft Access database engine cannot open or write to the file '(unknown)'. It is already opened exclusively by another user, or you need permission to view and write its data.
    ERROR [01S00] [Microsoft][ODBC Excel Driver]Invalid connection string attribute Trusted_Connection
    Please help

  • Hi, my MacBook Pro cannot open Safari. nexpectedly while using the librooksbas.dylib plug-in" the report details the exception code as 'EXC_BAD_ACCESS (SIGSEGV)' and exception codes as: 'KERN_INVALID_ADDRESS at 0x0000000920

    Hi, my MacBook Pro cannot open Safari. It crashes and gives the message, ' Safari quit unexpectedly while using the librooksbas.dylib plug-in" the report details the exception code as 'EXC_BAD_ACCESS (SIGSEGV)' and exception codes as: 'KERN_INVALID_ADDRESS at 0x0000000920

    Remove "Rapport" by following the instructions on this page.
    Back up all data before making any changes.

  • XML Report output giving error "word cannot open the file because....

    Hi All,
    Greetings!
    I have a standard report, 'Payables Posted Invoice Register".
    The report was going in to warning beacuse of some Invalid characters in the Data.
    I corrected the invalid characters and then ran the report ; it completed fine.
    But now when I try to open the report output, the output is not getting open but its allowing me to save the file.
    When I save it on my local machine and try to open it, I am getting an error as "word cannot open the file because it is larger than 512 megabytes".
    The document size showing is 664MB when I saved it on my machine. And the output type of the report is RTF and not PDF.
    Can anybody please help?
    Thanks,
    Sachin

    not sure, if the Microsoft word has limitation of file size.

  • RAS error - Cannot open report document. --- 0x80004005

    I am using RAS to open and examine a number of Crystal Reports and everything is working fine with the exception of 1 report.  I can publish this report to a different BOE system and examine it fine without error using the same code, so I am trying to understand why the process is failing.  The specific error thrown is:
    com.crystaldecisions.sdk.occa.managedreports.ras.internal.ManagedRASException: Cannot open report document. --- 0x80004005
    Unspecified error
    cause:com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: 0x80004005
    Unspecified error---- Error code:-2147467259 Error code name:failed
    detail: 0x80004005
    Unspecified error
         at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.openDocument(Unknown Source)
    Any insight as to why this error is thrown for this specific report?

    The message shows that this specific report cannot be accessed.
    Try to re-check the specific report both in the crystalreport designer and Infoview before using the code.
    Thanks

  • I cannot open firefox. I am told that it has crashed. I've sent reports but haven't heard back.

    I cannot open firefox in safe mode. I have to use internet explorer.

    Have you been using Windows System Restore ? that can cause Firefox problems and sometimes problems similar to yours. (Bug702045)
    I wonder if more than just the profile may be corrupted in such circumstances? <br> '''If '''the new profile does not work '''try a clean reinstall''' of Firefox 8
    * see http://kb.mozillazine.org/Standard_diagnostic_%28Firefox%29#Clean_reinstall <br/> including deletion of program files
    Your Crash details
    * Crash ID: [https://crash-stats.mozilla.com/report/index/04d97793-7360-440c-94b9-8d6ac2111116 4d97793-7360-440c-94b9-8d6ac2111116]
    ** js::Bindings::getLocalNameArray(JSContext*, js::Vector<JSAtom*, int, js::TempAllocPolicy>*)
    ** Related bugs include bug672262 bug691847#c67
    Also see [/forums/contributors/707773?page=2#post-43603]
    P.S.
    Alice/Cor-el <br>
    I am loosing track of this, are current problems after System Restore only corrupting omni.jar ?

  • I cannot open PDFs.  I kep getting an error report that it had trouble initializing.  I have reinsta

    I cannot open PDFs.  Error report that it has trouble initializing.  I have reinstalled the product several times.  I am using windows 7. 

    Reader version?  Local or online PDF files?  If online, in what browser?

  • Native User cannot open report

    Hello all
    I have this problem with this native directory user.
    This is my test user "TEST1"which is a native user.
    In the workspace, I can get into planning app using this user account.
    However, I cannot open reports or get into Excel add-in using this useraccount.
    It gives the error "native directory cannot be provisioned by Planning" kind of message.
    What could be the reason?
    Thanks

    Thanks John,
    The exact message is " @nativedirectory is not completely provisioned by planning".
    This is when I try to pull a report or when I try to log on to Excel add-in.
    I have looked at the the dimension level security, and this TEST user is assigned access. On the entity level, it is assigned "write-descendent inclusive" access on the top most level.
    Moreover, I can see it in the list of filters upon checking: - ADMINISTRATION-MANAGE-SECURITY FILTER..
    Could there be any other issue? Any suggestions?
    Thanks

Maybe you are looking for

  • How to calculate the overall outgoing call duration in a month?

    I have seen Call register & similar items in all the phones. But, in my iphone 4, there is NO OPTION for me to calculate my monthly outgoing minutes / seconds (mine is per second billing). Due to this, I exceeded my quota in my last month bill & I ha

  • Doubt in creating idocs

    Hi I had created IDOCS by following this procedure <b>Step 1 – Analyse Hierarchy Levels:</b> Analyse the data relationships being processed in the interface. Define the appropriate hierarchical Parent-to-Child relationships. Navigate to transaction c

  • Why Can't I Access My Leopard Shares from Vista

    I can access my Vista shares from Leopard via Go->Connect To Server (although they don't automatically just appear in Finder as they did in Tiger). In Vista, I can see my MBPro, but when I click on it there's a long wait followed by a Network Error,

  • Displaying a BufferedImage

    Hello, I'm building a program that needs to display a BufferedImage. I created a sub class of JPanel whom's only purpose is to display a BufferedImage, so instead of using drawImage, could I simply assign the Graphics2D object of my BufferedImage to

  • What Exactly is a Listener

    Im guessing that a listener is a invisible object in a frame? Is that correct. Im also guessing that in order to create a Function to be called You have to first create a listener like below listener = new Object(); Listener.KeyUp = Function() { Your