Cannot open a sequence: "Operation not allowed" error message

I had been editing a sequence in Final Cut Express HD (v.3.5.1) and then I went to "Render All" and it was most of the way through rendering when suddenly an error message popped up that said "Operation no allowed." I clicked "Okay" and then another error message came up that said "Error: Out of memory." Now I can't open the sequence, and I've lost a few hours of work. Every time I try to open the sequence, I get the same error messages.
Does anyone know why this happened and if I can recover it?
Using Final Cut Express HD 3.5.1.

Does anyone know why this happened and if I can recover it?
Sounds like you ran out of space on the hard drive fitting in the renders.
One or more render files may be corrupt as a result.
Try opening one of your Auto Save Vault files that pre-dates the upset.
Al

Similar Messages

  • Cannot open project. Just got an error message that says:  '  project contained a sequence that coul

    Cannot open project. Just got an error message that says:  '  project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated witht his sequence type. "  how do I navigate this and reopen my project. ( note: I recently transitioned from the 30 day free trial to 'buying in' to the license cloud application; if that has relevance....)

      FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

  • I cannot open elements 8 on new imac error message 150:30 appears.  any suggestions?

    I cannot open elements 8 on new imac error message 150:30 appears.  any suggestions?

    See if this helps:
    http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

  • I cannot open my i-Tunes folder and error message R6034 says I must re-install i-Tunes. If I do this will I lose all my music?

    I cannot open my i-Tunes folder and error message R6034 says I must re-install i-Tunes. If I do this will I lose all my music?

    See Troubleshooting issues with iTunes for Windows updates.
    Your library should be fine.
    You ought to back it up routinely anyway.
    tt2

  • Cannot open Sequence:  "Operation Not Allowed" then "Out of Memory"

    I quit FCS1 for about 5 hours and returned. When I opened the project I was working on I got these messages: "Operation Not Allowed" then "Out of Memory" when I attempt to open my master working sequence. Other sequences (small nests) do open within the project. The project opens, so the file is not corrupt. A back-up copy of the same project file on a separate physical disc generates the same results. I deleted the prefs and User Data folder, even ran FCP Rescue. Same results. Then I resorted to the Autosave Vault. The two most recent saves resulted in the same error messages. Fortunately the next did not. I lost a considerable amount of work. The system says my memory is OK (6GB). Any ideas? (An attempt to open on a FCS2 machine {8GB RAM} resulted in the same two error messages.)
    The project is fairly lengthy (90 mins) and does have numerous 1 and 2 frame audio edits. Nothing particularly unusual in the video tracks--although I am mixing DV and HDV. It doesn't seem to me these attributes would matter, just throwing them out there.

    ...removing and re-rendering is a great idea, if you've got the time.
    And if during render you get the same out of memory error, try rendering "in-to-out", rendering small chunks until you get to a chunk which brings up the error. Then, you've found an offending "corrupt" file.

  • Can't open sequence: " operation not allowed.  Out of memory"

    I have a project with several sequences. The master sequence started freezing on me. I restarted FCP and the computer, but now it won't let me open this sequence. It will let me open others in the project, but not this one. It's even smaller than others. I get the error message, "Operation not allowed. Out of memory." How do I fix this if I can't open it? I've cleaned out render files as well.
    Thanks for the help!

    The graphics/stills don't reside in your project or in a Sequence - those are just pointers to the original media. The images should be on a hard drive wherever you stored them.
    The problem could also be due to a corrupt render files. You could try trashing the render files for the project and see if it opens afterward.
    -DH

  • Cannot create application - 405 Method Not Allowed error

    Installed 11.1.2.1. Tried using EPMA to deploy app. Getting abort with the Method Not Allowed Error. Tried using Classic and getting the same error. Some of the details says "Server Error in Application "DEFAULT WEB SITE/HFM", "The page you are looking for cannot be displayed because an invalid method (HTTP verb) is being used." Any thoughts on possible causes?

    Hi Fsotto,
    The below document would resolve the issue.
    New Install on IIS 7, Cannot Access HFM from Workspace 404.3 Error in IIS Logs on HFM Web Server (Doc ID 1285684.1)
    Hope this helps,
    Please feel free to mark the answer as Helpful Answer/ Correct Answer should you find the relevant posting helpful so that it also helps us in keeping track of the answered queries.
    Thank you,
    Charles Babu J

  • I cannot open lightroom "lightroom has stopped working" error message

    I cannot open lightroom "lightroom has stopped working" error message

    I'm having what sounds to be the same issue. May I ask what version you were running? I'm using 4.1... And more importantly, have you figured out a solution?
    Any help would be greatly appreciated!
    Thanks!

  • I downloaded the latest version of itunes.  Now I cannot open iTunes.  I receive this error message: The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll.  Thoughts?

    I downloaded the latest version of iTunes on my PC.  Now I cannot open iTunes.  I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll"  After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 127)".  I've uninstalled iTunes and reinstalled to no avail.  I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck.  I also tried system restore and that did not fix the problem.  Any thougths on a repair?   

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more.  Itunes starts but before anything loads a

  • Cannot open jpg files in Preview? Error message "may be damaged or use a file format that preview does not recognize".

    For some reason I cannot open jpg files from a co-worker who previosuly sent files without any problems.  I just bought a MacBook Air with OS X Lion & Preview won't open the files.  She sent the same files to another co-worker who opened without any issues?  Help!  Anyone have any suggestions after having the same or similar problem?

    I don't have an answer as to why Preview doesn't want to cooperate, but if you only need to view the jpeg's and do nothing else to them, you can use two FREE applications that come already pre-installed on your Mac... Those are iPhoto and Safari. Just drag and drop over the application icon.
    You can also find several FREE photo viewers in the APP STORE.

  • I have purchased a new Mac power book 10.9.2.  I cannot open illustrator CS4 and get the error message 150:30.  Can you help?

    I have purchased a new Mac power book 10.9.2.  I cannot open adobe illustrator CS4 and get the error message 150:30.  Can you help?

    You are welcome, Sharon.
    You should be aware that the newest version, CC, is only available as a subscription.
    CS6 can be purchased at Adobe, or second hand, see below.
    Older versions such as CS5 can only be bought second hand, with a licence transfer through Adobe, requiring that the licence has not been used as a basis for an upgrade.

  • I suddenly cannot open edit in elements 9  get error message 150.30.  How do I fix.

    For some reason edit in elements 9 will not open.  I get error message 150.30.  Anny suggestions as to a solution?
    Catholic1943

    What to do about Error 150.30?

  • "Function module not allowed" error message

    Hi,
    We created a special FM to be processed when the INVOIC is in inbound processing. We link the FM to the process code and the process code to the partner functions. We get the error message; "Function module not allowed: & name of our FM". However, when we reprocess the idoc via WE19, it goes through.
    Did somebody ever face that situation?
    Thanks
    Martin

    Hi
    is it for MRM  .  If it is ,I faced the same Problem Martin .go to EDIFCT table give ur basic type and execute and check for entries .if there no issue other wise goto we57 and maintain the entry for basic type .

  • Why do I get an error msg that reads "operation not allowed" whenever I try to Remove Attributes from my timeline?

    On any given project, whenever I select everything in my timeline and try to remove all the attributes, I get an error message that reads "operation not allowed."
    If I select a smaller chuck of files on my timeline and hit remove attributes, it works, but this isn't the case if I select everything in my timeline.
    How do I fix this? Thanks!

    Have you tried trashing your Final Cut Pro preferences? It is usually the first step when FCP begins to act in unexpected ways.
    Download Preference Manager (free) from Digital Rebellion
    http://www.digitalrebellion.com/prefman/
    and use it to trash your preferences - they will be set to default the next time you open FCP.
    If that does not remedy the problem, do you have any still images in your timeline that are not RGB, or are greater than 4000 pixels in the widest dimension?
    Is your source material in an FCP7 edit friendly codec?
    MtD

  • My operating system is Windows XP SP3.  I have Adobe 11.0.08 installed.  I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component  -  "Application failed to start because lxdautil.dll not found."  Any suggestions?

    My operating system is Windows XP SP3.  I have Adobe 11.0.08 installed.  I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component  -  "Application failed to start because lxdautil.dll not found."  Any suggestions?

    That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.

Maybe you are looking for

  • Vendor Invoice Payment (Urgent please)

    Hi Need to know I have done Down payment to Vendor F-47 of Rs 3000 then did F110 and paid the vendor throguh Check. Now I created a PO of Rs 8500 and did GR and so while doing Invoice of it showed me 3000- down payment exists. Show how can  I did the

  • Error with anonymous user

    I have configured an anonymous user and created a new framework page to display the content.  When the page first loads, the correct framework page, theme, and content appear.  However, if I click on one of the content tabs (even if it is the first o

  • Because I have my photos hooked up on a download problem, my Back Up onto I cloud is reading 5 hours. can you suggest how to unhook it all

    I need to unhook this problem of my photos downloading permenantly, because when I try to Icloud backup, it says it will take 5 hours. please offer suggestions

  • Pictures Taken Not Stored

    Anyone know how to have the Camera Roll folder on my iPhone store the photos I take and not crash to the iPhone default home menu when I click on it in the sunflower icon'd Photos menu? Background: I've been using I think it is Adobe Photos Starter E

  • CAC applet unable to find acpkcs211.dll

    I'm required to develop an applet that can call the ActivClient dll to read a CAC smartcard. I have a working console version that works perfectly as it references a locally stored config file with the following: name = myConfig library = C:\Windows\