Cannot open a single project after disabling support for project professional 2007

We use SharePoint/Project Server 2010. I have a single project on the Project Server (PS) that fails to open in Project Professional (PP). The project is editable in PWA, but PP closes it as soon as it opens it (ie that's what the status window is
displaying, I basically get a blank screen in PP after "opening" the project, and when closing it does not have anything to save/check in). The only recent change I made was disable PP 2007 support. I reviewed several posts so here are
some thoughts: I am currently not using backups, so cannot restore, the server name is already in the trusted list. Any way to retrieve this project from the server (or directly from DB)?

Hi Wwodzien,
It might be because of duplicate RES_OPTINDX values. Please install following KB and check the behaviour.
http://support.microsoft.com/kb/2687386/en-us
Note:- I would suggest you to test this in a test environment first.
Happy troubleshooting....
Vikram Daruru - MSFT

Similar Messages

Downloaded a program and now all of my programs are in adobe reader and I cannot open them because they are not supported for Adobe reader

When I downloaded a program, it wouldn't open, so I tried to convert it to Adobe reader, now my main browser, Firefox is in the Adobe reader program with others and i can't close Adobe reader, and I can't open any of the other files because they cannot run in Adobe.

When I downloaded a program, it wouldn't open, so I tried to convert it to Adobe reader, now my main browser, Firefox is in the Adobe reader program with others and i can't close Adobe reader, and I can't open any of the other files because they cannot run in Adobe.

I cannot open my iphone 4s after download ios 7 and backup Itunes from Iphone to my PC. i cant restart my Iphone now. please help me.

i cannot open my iphone 4s after download ios 7 and backup Itunes from Iphone to my PC. i cant restart my Iphone now. please help me.

Hello nguyendexter2012,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Best of luck,
Mario

I just upgraded to OS X Yosemite and now I cannot open an existing project in ibooks author

I just upgraded to OS X Yosemite and now I cannot open an existing project in ibooks author

The Quicken issue has been a hot topic in the Quicken forum as well as many others. Intuit did not provided an updated Quicken when Lion came out. I believe that within the past month Intuit has announced a version that does work in Lion, I looked into it, but was not impressed; there were some technical issues that prevent me from using it (don't recall the details though). Fortunately, I found out about the Quicken mess when Lion came out, and like many users, migrated the quicken data files over to a common format that could be imported into a number of new financial apps like iBank. Intuit lost a lot of Mac users over this.
As for Excel and Word, you have to buy Microsoft's newest version of Office on Mac to be compatible.

Adobe Reader cannot open URLLink.acsm because not a supported file type or is damaged

tried to download ebook, kept getting message Adobe Reader cannot open URLLink.acsm because not a supported file type or is damaged. Have downloaded Adobe Digital Editions, have an Adobe ID. What is the problem?

1. I assume you have some PDF documents you have been keeping a long time. Look at their modification date. Is it what you'd expect (years ago) or is it all the same, recent?
2. Has a TXT file appeared in the same folder as the PDFs?

I have just purchased a subscription of Acrobat XI Pro, which I installed in my computer a long time ago, when I first tried it. Alas, I cannot open the application, which keeps asking me for a serial number I have not yet received. What the hell is going

I have just purchased a subscription of Acrobat XI Pro, which I installed in my computer a long time ago, when I first tried it. Alas, I cannot open the application, which keeps asking me for a serial number I have not yet received. What the hell is going on?

[discussion moved to Acrobat Installation & Update Issues forum.]

I cant open adobe acrobat pro after just paying for it and downloading it!!

I cant open adobe acrobat pro after just paying for it and downloading it!!

What is your operating system? Acrobat version?
What exactly happens when you try to open it?

Something software related prevented me from being able to boot up my iMAC. The remedy was to wipe the computer of all soft wear and re-inatall everything via my time capsule. All good there.. but now I cannot open Ai and a box stating"Licensing for this

Something software related prevented me from being able to boot up my iMAC. The remedy was to wipe the computer of all soft wear and re-inatall everything via my time capsule. All good there.. but now I cannot open Ai and a box stating"Licensing for this product has stopped working" and to reference error code 150:30. How do I get my Ai to open?

Run the cleaner tool and reinstall it properly.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium

Is it possible to disable support for VLV indexes?

Is it possible to disable the support for VLV indexes?
We have an application which tries to do VLV searches. We dont' have and don't want to set up any VLV index. Would it be possible to just disable support for them? Make ODSEE not advertise the control and just return "unsupported control" to the client?
thanks - mo

I think there are a couple of ways to go about this.
IIRC the VLV control ought to exist under your config suffix as a "feature". If you look at the documentation for setting up a VLV index, you should see where the VLV configuration objects exist. One common problem users run into with the VLV objects is that they are governed by access control. That is, the bound user has to have permissions to the VLV config object in order to use the control. So - assuming you are using a version of the server that still uses this design - you should be able to disallow VLV control use by any user other than the rootdn (Directory Manager).
If your application is querying the root dse and checking whether the VLV control is supported (and then obeying what it sees there) you might be able to change the list of supported controls being returned on the root dse. I'm not sure exactly how to do this since I don't recall seeing the supported control attributes in dse.ldif, but my memory is spotty on that. In any case this solution would rely on the good behavior of your clients.
Actually, if the bound user does not have permission to use the control, there might be an argument to make that the server shouldn't return the control as supported when the root dse is queried by that user.
The best solution is probably a combination of the two complemented (ideally) with modification to the client that prevents it from sending the VLV control. Since presumably the client is sending the VLV in order to accomplish a client side task, simply causing the VLV to fail may not produce the best results from the end user's perspective.

MS Project Professional 2007 resource loaded .mpp file published to EPM server but resources can't see their tasks in PWA

Hi all:
I'm using MS Project Professional 2007 and I created the schedule as an .mpp file and assigned resources before I loaded the schedule to the EPM server. I created the resource names consistently with the names in the Enterprise resource pool and when I go into
tools / assign resources and filter on enterprise resources, I see the resources I assigned to my project associated with the correct tasks. The only problem is that when these resources go into PWA, they can't see their assigned tasks even after I save and
publish the project. If I create a new resource assignment while I am connected to the server, then the resource can see the new assignment, but I don't want to have to completely recreate the project assignments to remedy this situation. Can anyone tell me
another way to fix it so that resources begin to see their assignments in PWA and can enter their time there?
Any suggestions would be greatly appreciated.
Thanks,
David

Hey Dale. Published = Yes on all tasks. That's not it.
But you definitely hit the mark on Assignment Owner. That must be where the problem is. When I read that I remembered that when I go into PWA all the project tasks show up under My Tasks, which seemed wrong to me and I asked the administrator
about that. he told me it was because I was the project owner. Now I know that was not a correct response on his part and I'll point it out to him.
I did check the Resources and Assignment Owner was blank. I tried to set it to be the Resource and it's a locked field. I can't do it. It doesn't surprise me that this field is locked because I suspect the administrator controls the
Enterprise Resource pool. But what does it tell you that this field is blank. Since I'm getting the tasks in my My Task list, I expected to find my name there.
Anything else I should check?
Anything I should tell the admin about how to make the Resources the owners of their own tasks. I assume that should be the default. That can be corrected just as easily in the Resource Sheet View as in the Resource Usage view, I assume
-- is that correct?
Thanks again for helping me figure out what the problem is.
David

Cannot open old iMovie project

I have an old iMovie project from 2008 that I cannot open.
If I double-click it, terminal opens.
Recommended applications are Textwrangler, Terminal.... not really the right thing to watch a movie.
Final Cut Pro X cannot read the file, because it's in the "bundle" format. Quicktime is also grayed out.
Is this some weird format that is no longer readable by anything? Or can I turn it into an .mp4 file?
Thanks.

iMovie doesn't support importing one iMovie project to another. When we try, we get exactly the error you quoted.
You can, however, import all the Timeline video and audio as a single clip to a new project. Or you can drag files from the Media folder of the project to the Timeline of a NEW project.
In the Finder, Control-click on the project icon and choose Show Package Contents from the popUp menu. You'll see the movie "Timeline Movie.mov" in the window that opens. You want to import that movie to a new project, or import selected files in the Media folder.
To import, drag the file to the Timeline of a NEW iMovie project. If importing the Timeline Movie, everything on the Timeline of the original project will arrive as a single clip in the new project.
If the project failed on the external drive, it may be because the disk does not use the disk format required by iMovie. Use Disk Utility to check the disk format, which must be "Mac OS Extended". If it's not that format, use Disk Utility to reformat the drive. (Which will erase all the files on the drive, so make backups.)
Karl

Cannot open Robohelp 8 project in Robohelp 9

I cannot open my old Robohelp 8 projects from Robohelp 9. When I open it, it shows me a prompt to make a backup and upgrade the project. Then I click Upgrade, it returns an error:
"open project was cancelled or the application was unable tp load the database for <path to my project>"
Creating or opening new projects in the 9 format works fine.
The old Robohelp project was created on a different PC. I just copied the whole folder to a new PC with Robohelp 9. The oroject is not corrupted I can still open it on my old PC with RH8.
Any suggestions how to fix that?
Thanks

There isn't a Save As option but usually it is as simple as copying the project from one location to another.
No it doesn't write an absolute path as if it did that, none of us could move projects.
Do you have a second machine (not with SSD) that you can install RoboHelp 9 on in trial mode? With that you could perhaps put the project on an external hard disk and prove it works there as it does for me?
Are you copying just the project out of your profile? So C:\Users\XXXXX\Documents\My RoboHelp Projects\Project1 becomes D:\Project1. If not, try that.
After moving, getting the error and trashing the CPD, do you get the error again if you reopen after that?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Cannot open Lightroom on iMac after download of OS X Yosemite

After downloading Yosemite on iMac I cannot open Lightroom files. I am getting the message "The Lightroom catalog cannot be used because the parent folder “/” does not allow files to be created within it."
Can somebody help me please.

Here are some start up commands you might like to try Startup key combinations for Intel-based Macs - Apple Support
Personally I would try in Recovery mode...OS X: About OS X Recovery - Apple Support

Cannot open an iMovie project file

I can no longer open an iMovie project file from my external hard drive. Other iMovie projects on the hard drive can be opened, but not my main project. I've transfered it back to my MacBook Pro and then tried importing it into a new project, but I get an error -43 message about Quicktime not able to 'parse' the file. I have also tried Lennart Thelander's "File Fixer" but this still does not open the file. File icon and file size (39.02GB) seem to be the same as when the file could be opened. Is there a way to recover this file?
Merci

iMovie doesn't support importing one iMovie project to another. When we try, we get exactly the error you quoted.
You can, however, import all the Timeline video and audio as a single clip to a new project. Or you can drag files from the Media folder of the project to the Timeline of a NEW project.
In the Finder, Control-click on the project icon and choose Show Package Contents from the popUp menu. You'll see the movie "Timeline Movie.mov" in the window that opens. You want to import that movie to a new project, or import selected files in the Media folder.
To import, drag the file to the Timeline of a NEW iMovie project. If importing the Timeline Movie, everything on the Timeline of the original project will arrive as a single clip in the new project.
If the project failed on the external drive, it may be because the disk does not use the disk format required by iMovie. Use Disk Utility to check the disk format, which must be "Mac OS Extended". If it's not that format, use Disk Utility to reformat the drive. (Which will erase all the files on the drive, so make backups.)
Karl

BUG in PE 13- cannot open and save projects from PE11!!!!!!!

For 1 month I'm requesting a TECH Support to resolve a BUG in Adobe Premiere Elements 13 that cannot load and save projects from PE11. I already provided all details several times (about my PC system & exact steps to reproduce a problem, etc) & posted in this PE forum as well.
Adobe is the WORST company I have ever came across that shows NO SUPPORT for its clients. Not only they don't have a phone line, but lacking in providing its clients with other channels to contact Tech Support (if such exists??) via emails or a chat. It is unheard of that a company would SELL its products, collected money & then had NO responsibility to correct problems they introduced. SHAME on you! I will post this opinion in Facebook and everywhere. I will warn people they should beware on spending money on Adobe horrible products where a company refuses even support these products and where a company only relies on common users who also already spent money and now experiencing all sort of problems. Unbelievable!
Adobe team, if you are not helping with resolving your last bugs, you should at least send me a link for the old PE11 that I could finish my projects. I hope that someone will finally contact me

Please see- http://barbarabrundage.com/2010/11/29/using-photoshop-elements-9-with-iphoto/
Thanks
Andaleeb

Cannot open a single project after disabling support for project professional 2007

Similar Messages

Maybe you are looking for