Cannot open ACS 5.4 alarm notifcations via URL

Hi,
We have configured the ACS 5.4 to send us alarms on Failed authentication on any device.
When we get the alert the report URL inside the notification does not open via browser.
Is there anyway that we can configure the ACS 5.4 to open the report URL via an IP address and through FQDN.
I tried changing the hostname to FQDN, but it does not accept special characters.     

Hi
FYI, there are two types of alarms in ACS:
Threshold Alarms
Threshold alarms are defined on log data collected from ACS servers that notify you of certain events. For example, you can configure threshold alarms to notify you of ACS system health, ACS process status, authentication activity or inactivity, and so on.
You define threshold conditions on these data sets. When a threshold condition is met, an alarm is triggered. While defining the threshold, you also define when the threshold should be applied (the time period), the severity of the alarm, and how the notifications should be sent.
System Alarms
System alarms notify you of critical conditions encountered during the execution of the ACS Monitoring and Reporting viewer. System alarms also provide informational status of system activities, such as data purge events or failure of the log collector to populate the View database.
You cannot configure system alarms, which are predefined. However, you do have the option to disable system alarms or decide how you want to be notified if you have enabled them.
For more information regarding configuration, please go through this link:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/common_scenarios.html

Similar Messages

  • Cannot open a report I just saved via Save a Dynamic Template

    Hi All,
    I am on BPC 5.1 SP9, working in Office 2007.
    The problem is happen sporadically, where I save a report using Save a Dynamic Template.  Then try to open up the report I just saved, and the report does not open.  Sometimes if I resave the report via Save Dynamic Templates, I can reopen up the report.  If that does not work, I go back into Save Dynamic Template, and save it to a new name, and see if I can get the report to open.
    The strange thing is I can save the report to my desktop, then go into BPC.  Every time I open the report from my desktop it always runs.
    Not sure if anyone has seen this before?

    Does your template have an Excel 2007 4 digit extension? 
    There is a known issue with BPC 5.1 sp7 or higher service pack and Excel 2007 format extensions (SAP Note 1347243)
    Files with Excel 2007 Extension such as XLSX and XLTX, (saved and opened repeatedly via eTool -> Save / Open Dynamic Templates menu) may have issues where the template will not open.
    The problem does not exist with BPC 70M sp3 or higher. 
    The note also has a possible workaround; suggesting renaming the template on the File Share Server and then opening the re-named template via Open Dynamic Templates menu.
    Hope this helps.

  • Cannot open Planning App in Production migrated via LCM

    I migrated from development to Production using LCM but I had issues with opening up the application in Production because the password from the development carried over to Production.
    How do I fix this?

    Hi,
    That's actually why you should run LCM selectively rather than for everything at one pass. Can you not reset your password in shared services? If you are having problems with database connection, then the solution is to reconfigure data source/edit data source.
    Cheers,
    Alp

  • Cannot open jpg

    Hi to all
    i am new to mac and the only complaint i have is that for some reason i cannot open jpg files that i sent via BT. or any form
    when i click on it the icon moves(like is going to open) but nothing comes on
    i have Google it and it seems a problem with preview.
    how can i go around this
    is there another app for viewing pictures
    i tried the iphoto but i have to manually send it there
    i just want to double click on a picture and preview it easily

    Preview should be able to view any true JPEG. If the JPEG is encoded in some proprietary format that may give you trouble. Verify your file is a .jpg file.
    If it isn't they sent it to you as an improperly coded JPEG.
    You can always try the Open With command from the contextual menu. Control-trackpad click gives you Open With as a contextual menu in the Finder. This lets you pick another application to open with.

  • Web page will not open.  "Safari cannot open page.  I've deleted cache, reset, gone into proxy settings--(will not allow to go further--needs)

    I am trying to figure out why some pages will not open.  I've tried proxy settings and it does not allow me to check boxes.  Certain pages--like groupon stuff--will not open.  Is there an easy fix?  Will you hep?  Thanks

    I am so sorry to hear that you cannot open some web pages by typing a URL.
    Please supply some specific examples, so other Readers can try them to see what the problem might be. Trial and error is impossible.

  • I have been creating a document in numbers on my iPhone and synced to iCloud. Now I cannot open it, and when trying to download via browser I get an error message. How can I recover this document?

    Dear all,
    I have created a document on my iPhone, and stored it on iCloud. I have updated the document both on my iPhone and on my iPad. Now, I cannot open the document on my iPhone anymore, even a reset of the phone did not help. Via iPad I also cannot open the file, and when I try to download it to my PC via icloud.com I get an error message.I suspect that the file has become corrupt as I have updated it on the iPhone while I did not have network connectivity.
    I have two questions:
    1.) Is it possible to recover an earlier version of the file?
    2.) What can I do to prevent this from happening again in the future?
    3.) Does the iPhone sync changes to iCloud in the background or does the application need to be active?
    Thank you,
    Niftan

    Welcome to the Apple Community.
    I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
    The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
    My syncs are immediate, I never get chance to see if it works in the background, sorry.

  • Is there a way to open a zip file received via email on the iPad? I tried and a message popped up saying mail cannot open the attachment.

    Is there a way to open a zip file received via email on the iPad? I tried and a message popped up saying mail cannot open the attachment.

    You need a third party app. Take a look at some of these on this Google page.
    Open zip files on iPad

  • I cannot open PDF filkes sent via email. I used too. nHow do I fix.

    Cannot open PDF files sent via email. The open via Word in encripted jinerish. This has not happend until now.
    Ciro

    I had the same problem.  My version of RoboHelp is pretty old (x5) and the problem was with pdfs made up in version 9.  Some pdfs would open and some would not.  It depended on the version used to make the pdf.  Got error messages and corrupted file messages.
    I solved the problem by using the full version of Acrobat and using the pdf Optimizer to make compatible with version 5( just to make sure).
    Another option is to "print" to the pdf printer when the file is open.
    Both then can be imported into RoboHelp without a problem
    Hope this helps.  It ruined many days at work for me while I tried to figure out what on earth I was going to do.
    Holly

  • Cannot open HFM application via Workspace

    Hi
    At times users cannot open HFM application via WorkSpace.When they open an application they can see the progress bar and the application does not come back(HUNG).
    Looking into the logs at the time of incidents we find the following from the logs
    An unknown error has occurred in the HsvDSSystemInfo object.
    System Message Details
    Error Reference Number: {16E56999-6F2A-4905-99D5-B65C14A14F81} Num: -2147210624; User: Type: 0; DTime: 21/09/2009 12:39:54 PM; Svr: AU02UAP093QAN32; Application:
    File Error List
    File: CHsvDSSystemInfo.cpp Version: 9.3.1.0.1502 Line: 1981 Error: (-2147210624)(0x80042A80)(An unknown error has occurred in the HsvDSSystemInfo object.)
    XML Error String
    +<?xml version="1.0" ?>+
    +<EStr>+
    +<Ref>{16E56999-6F2A-4905-99D5-B65C14A14F81}</Ref>+
    +<User></User>+
    +<DBUpdate>157330616</DBUpdate>+
    +<ESec>+
    +<Num HEX=0x80042A80>-2147210624</Num>+
    +<Description Src=HFM>An unknown error has occurred in the HsvDSSystemInfo object.</Description>+
    +<Type>1</Type>+
    +<DTime>21/09/2009 12:39:54 PM</DTime>+
    +<Svr>AU02UAP093QAN32</Svr>+
    +<File>CHsvDSSystemInfo.cpp</File>+
    +<Line>1981</Line>+
    +<Ver>9.3.1.0.1502</Ver>+
    -<DStr>ORA-01400: cannot insert NULL into ("HFMOWNER"."QANTASHFM_USERPARAMS"."PARAMETERKEY")</DStr>-
    +<ExErr></ExErr>+
    +<PSec>+
    +<Param>INSERT INTO QANTASHFM_USERPARAMS (Username,EntryIDX,ParameterKey,BLOBData) values(N'admin@Native Directory',1,N'','19')</Param>+
    +</PSec>+
    +</ESec>+
    +</EStr>+
    Is this a known issue? What are the steps to resolve this issue?
    Thanks in Advance

    Hi Manoj,
    Please check the following points
    Is shared service is running
    Is HFM application thick client working
    Is application been creataed, if yes, is that application registered with shared services.
    Check Workspace services is running or not, and Hyperion Financial Managment services is running or not.
    Make sure that all services are running before you open workspace.
    Let me know what your system gives messages.
    Regards
    Raj - Learner

  • I have loaded and reloaded Reader 9.  I cannot open a pfd document.      I can save it to desk top then open it via a drop down box that has a "open with Adobe Reader 9".  How can I avoid having to do this?

    I have loaded and reloaded Reader 9.  I cannot open a pfd document.      I can save it to desk top then open it via a drop down box that has a "open with Adobe Reader 9".  How can I avoid having to do this?

    Hello Michael,
    Thank you for your response.  My operating system is XP.  When I try to open a pfd document I just get a series of letters and symbols in a dialog box.  The top of the box says "select the encoding that makes your document readable".  I can choose Windows, MS-Dos, or other (there is a long list to choose from).  None seem to make a difference.  If I save the document to my desk top I can right click on it and choose an option "Open with  AdobeReader 9" and it opens fine.
    Thank you,
    Rick 
    New Edge Technologies
    6525 Peninsula Dr.
    Traverse City, MI 49686
    231.620.2521
    231.941.1284 (fax)
    [email protected]
    Date: Wed, 8 Jul 2009 06:22:51 -0600
    From: [email protected]
    To: [email protected]
    Subject: I have loaded and reloaded Reader 9.  I cannot open a pfd document.      I can save it to desk top then open it via a drop down box that has a "open with Adobe Reader 9".  How can I avoid having to do this?
    Hello:
    What operating system does your computer use? What happens when you attempt to open a PDF document rather than saving it first? Please include any/all error messages. Also, have you tried opening documents from other locations or just one in particular?
    Thanks,
         Michael
    >

  • Cannot open IPS via IDM

    Issue with IDM access to IPS module
    To anyone that can assist!
    I have a situation where I can only connect to via IPS module using the ASA console and opening a session to the module itself. I cannot open an IDM session at all.
    This device is acting as a secondary device and the primary is functioning correctly.
    The problem has occurred after inputting the following configuration in via a sevice account to disable weak ciphers.
    su -
    cd /usr/cids/idsRoot/etc
    cp tls.conf tls.conf.orig
    sed '/TLS_RSA_WITH_DES_CBC_SHA/d' tls.conf.orig > tls.conf
    /etc/init.d/cids reboot
    The IPS was stuck in INIT for two hours and caused the ASA isssues with failover so the device was phycially powered off. After being restored, I can log in via the console, but cannot browse to it or monitor the module via IME.
    Does anyone have an idea on how to resolve this issue?
    Many thanks
    James Cotterill

    Hi CSCO12625692,
    Thanks for replying, unfortunately that did not resolve anything.
    I cannot browse to the page either. It is almost as if the web service has now stopped completely.
    Any ideas?
    thanks
    James

  • I cannot open pdf's via any browser links on my macbook running leopard 10.5.8.

    Hi, I cannot open to PDF's via any browser links on my macbook (1 yr old) running leopard 10.5.8. I have latest adobe reader installed but when I click a link to open a pdf from various sites no matter what browser it just opens a blank tab. Any thoughts?

    Here, it has to be there, but it may be minimised. You just have to press the grey arrow. I took a before/after screenshot for you.
    Before:
    After:

  • Hello I cannot open Lightroom that I purchased via Creative Cloud

    Hello I cannot open Lightroom that I purchased via Creative Cloud

    What is happening when you try?
    Did you have the non-CC version of LR 5 installed as a trial, previously?

  • Something software related prevented me from being able to boot up my iMAC. The remedy was to wipe the computer of all soft wear and re-inatall everything via my time capsule. All good there.. but now I cannot open Ai and a box stating"Licensing for this

    Something software related prevented me from being able to boot up my iMAC. The remedy was to wipe the computer of all soft wear and re-inatall everything via my time capsule. All good there.. but now I cannot open Ai and a box stating"Licensing for this product has stopped working" and to reference error code 150:30. How do I get my Ai to open?

    Run the cleaner tool and reinstall it properly.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Download CS6 products
    Mylenium

  • I cannot open a tab or new window to the right of an existing tab. I've followed the instructions to update via FAQ but still not working. Help!

    I cannot open a tab to the right of an existing tab. I've followed the directions provided under normal FAQ. This feature just recently was wiped from my PC, and I am not certain how.

    The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Maybe you are looking for

  • My new folder option in finder is greyed out.

    I have googled this issue and have followed the suggestions of deleting my finder playlist and making sure I have permission.  I have also used my disk utility.  Nothing has allowed me to create a new window.

  • How do I superimpose graphic in EDITED green screen video?

    I know that I can throw a graphic in my project and then take a video from the event library and drop it over, choosing green screen in contextual menu. What I'm having a MAJOR issue with is how do it with an EDITED video. It appears that once I comb

  • Hover problem in Top Level Navigation

    Hi. We activated hover option for Top Level Navigation. So, users can hover over first-level entries and immediately see the entries that will appear in the second-level. The user can then click the second-level entries and navigate to one of these e

  • Connection to host, service sapdb00 timed out

    Dear Friends I am trying to use SAP R/3 system at my office from my home through VPN. I have got a broadband connection with a wireless modem and When I try to connect to my office via VPN from my laptop it connects, but after this when I try with SA

  • Whitelist bug or a i just stupid

    o.k. i created a whitelist to add object embedding support...when i did, restarted the webservice and now the blog and wikis are disabled.anyone ever have this problem