Cannot Open Additional Mailbox

I'm having an issue with quite a few shared mailboxes that seem to be sporadic issue. I have about 15 mailboxes that have full access permissions to a group. I'm able to open a few but some come back with "Cannot expand the folder. The set of folders
cannot be opened. Microsoft Exchange is not available.etc" I can create a mail profile for each of the mailboxes and get in just fine. I remove one additional mailbox and all of sudden I can get into one I wasn't able to get into before but when I close
and reopen outlook then I can't get back in it. The issue is very sporadic I've checked autodiscovery all is correct there. I can't seem to find anything in the logs on the exchange servers. If I look at the connection status in outlook you can't see the guid
of the mailbox that you get from autodiscover. Any thoughts on how I can go about troubleshooting this?

I added 5 additional mailboxes 4 out of the 5 opened when clicked. They all have the same permissions on them. I then removed all 5 and added the 1 that didn't work, after this the 1 that didn't open did open this time. I doubt I'm having a permissions issue
after that troubleshooting step. I would assume that you maybe correct I am hitting a throttling policy. Is there an easy way to check to see if I'm getting throttled such as a hit counter? Also these mailboxes are for voice mailboxes only and only have like
5-10 messages in it this surprises me as being throttled.
Update
I added 1 at a time until I got to 5 and it wouldn't open I then removed 1 at a time and it still wouldn't open. I closed outlook reopened and then it opened just fine...Could I be hitting some outlook limit?
Yet another update
Got to 4 wouldn't open closed outlook then it would but then proceeded to add another voice mailbox and got this error when even trying to add one "The name cannot be resolved. The connection to Microsoft Exchange is unavailable." the results are
so sporadic that it feels like a throttle policy but what part of the policy would it be?

Similar Messages

Cannot remove additional mailbox

I gave myself full access rights to a user's mailbox and did what I needed to do using OWA. But now, in my Outlook I have their mailbox and I can't remove it. Their name does NOT appear in 'open additional mailbox'
If I remove full access rights on ESM I can't open the mailbox in Outlook, and if I give myself full access rights again I can. But I can't remove or close it. I tried the REGEDIT HKCU edit and so removed the key with the user's name in it and restarted
Oulktook. The mailbox added itself while I watched.
I deleted my Mail profile then added it back using another profile name. The ^$^%$^$ mailbox still appears.
Any ideas on how to get rid of it?
Thanks

Im having the same issue as everyone in here but identical to Abdul Jaleel Maliks issue. I have no one in the list but many in the listBL. When I try to remove them, I get the "Cannot be modified because its owned by the system" error message.
I have done these tow things to try to get rid of that error:
In HKEY_LOCAL_MACHINE\System \CurrentControlSet\Services\NTDS\Parameters, create the following value:
Value name: Allow System Only Change
Data type: REG_DWORD
Value data: 1
Then close the registry and now you should be able to modify through ADSIEDIT .
this did not work. I also tried this:
Login as a member of Schema Admins (preferably on the Schema Master FSMO)
Launch LDP.EXE
Connect to the Schema Master FSMO using LDP.EXE
Bind to the Schema Master using an account with Schema Admin permissions.
From the Browse menu, choose Modify
In the Modify dialog box, leave the DN field blank, and type schemaUpgradeInProgress in the
Attribute field. In the Value field, enter the number 1. Click the Enter button, then click the Run button.
Close the Modify dialog box.
Launch ADSIEDIT.MSC and modify the mAPIID values for the necessary attributes . (You may need to wait for the Active Directory to replicate.)
Run LDP again, and change the value of schemaUpgradeInProgress from 1 to 0.
From the Active Directory Schema console, right click on the console and choose "Reload the Schema"
During this, i tired to edit the values of the ListBL attribute and it gave a database error and the a schema error.
Any thoughts on this would be greatly appreciated

I cannot open my mailbox

i cannot open my mailbox.

Here are some suggestions for getting the best results from this site.
Create a user profile that accurately reflects the type of hardware you're using and your version of the Mac OS, or include that information in your first message.
Give details of the problem. A statement such as "it doesn't work" conveys no information. If it did work, you wouldn't be here. Instead, you should post something like this: "I did A; I was expecting B, but C happened instead." Include the complete text of any error messages you saw and where you saw them: in an application window, a CrashReporter window, a log, or whatever. Also include the steps you’ve taken yourself, if any, to try to resolve the issue. If the problem is of recent origin, did you make any changes to your setup just before you first noticed it?
Search the discussions for answered questions similar to yours before posting. If you found any relevant information, but it didn't help, include details.
Post in the appropriate discussion area. Usually that means the area for the type of Mac you're using, if the problem is hardware-related, or for the Mac OS version you’re running, if it’s more software-related. Some other Apple technologies have their own discussion areas.
Is the problem reproducible or intermittent? That is, does it always manifest itself when you take a certain action, or only at unpredictable times?
If asking about third-party software, specify what it is, the website where you got it (if applicable), and what version you have. Ask the developer for help first. Include the results of that contact in your message: what you did, and what happened.

I suddenly cannot open my mailbox AND my computer won't shut down because the mailbox is open - it won't open OR close!

I suddenly cannot open my mailbox. When I tried to restart my computer (thinking THIS might help), I get the message "The application Mail canceled shut down." Any ideas? Thank you!

Right click the Mail icon in the dock, then click option to force quit the mail program.

TS3276 I cannot open my mailbox and I cannot quit it, therefore I cannot shut down my computer. what do I do?

I cannot open my mailbox, I cannot QUIT it, and therefore my computer will not shut down. What do I do?

You can't Force Quit it?

Cannot open another mailbox

Hi
I have two email accounts on OWA365 I log into one then when I click open another mailbox I get an error...
something went wrong
Your mailbox appears to be unavailable. Try to access it again in 10 seconds. If you see this error again, contact your helpdesk.
X-OWA-Error: Microsoft.Exchange.Data.Storage.ConnectionFailedTransientException
X-OWA-Version: 15.0.745.14
X-FEServer: DB3PR02CA001
X-BEServer: DB4PR02MB048
Date: 24/08/2013 12:36:42

Hi,
Even after giving permission getting below error
something went wrong
We're having trouble getting to your mailbox right now. Please refresh the page or try again later. If the problem continues, please contact your helpdesk.
X-OWA-Error: Microsoft.Exchange.Data.Storage.ConnectionFailedTransientException
X-OWA-Version: 15.0.995.28
X-FEServer: ZAJNBEXC13
X-BEServer: ZAJNBEXC11
Date: 2015-02-02 09:38:08 AM
Amit

Cannot open additional windows until others are closed.

I am receiving this message when trying to open a link in Facebook. Usually when I would get this, I would just reboot the phone and then it would work. I have rebooted twice and cleared my cache and am still getting this message. Anyone know how to fix it? Thanks

Hello frog0568,
I’m glad that you asked this question my friend! Oftentimes, when we browse the web, another window opens up. If this is the case then you may have multiple windows open. To close the windows, simply follow the steps below.
Open the web browser > Menu > Windows > Next to each window there is a “X” to close the internet.
Once you have done so then please retest your Facebook link to see if it’s work. Let me know what happens.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

I can't open my mailbox. I click on the icon but nothing happens. I also cannot reboot the computer because it keeps saying I need to close the mail account, which is not open. HELP!

I cannot shut down or restart my computer. The message tells me to close my mailbox, but I cannot open my mailbox, so I am stuck - can't reboot nor can I open my mail to quit mail. HELP!!

Use Force Quit under the Apple, or by clicking the Mail icon. You might also try force quitting the finder.

Mail issues, cannot open or close

I cannot open my mailbox. I click on the stamp with the eagle on it, and on gray bar where things open up it says "mail", but i cannot write or read messages, and i cannot quit the application. No content is shown, no emails or anything. It is just my computer background. I tried to quit mail, but it will not let me do that. I cannot restart my computer, because mail is not closed. So if mail will not fully open, yet it is open enough to not be able to restart my computer without quitting, but there is no quit option and the commandQ button is not working ,how do i go about getting rid of this problem??

You seem to have some serious flaws on your harddisk.
Do you ever run maintenance software (e.g.
MacJanitor) or switch off your Mac every day? It's
doing some maintenance by itself in the middle of the
night if you leave it on.
This reply gets more & more detailed, just begin with
the first instructions and see of that helps. If not,
work down the list of suggestions or post back for
more instructions.
Run Disk Utility - Repair Permissions and if that
brings up a whole set of issues, try something more
serious like Disk Warrior.
MacJanitor (free)
DiskWarrior
(not free)
If you want more details on these problems, have a
look here for
Resolving Disk, Permission and Cache Corruption,
it gives you a comprehensive description of how to
deal with these problems. Plus some notes on side effects of cache cleaning
Useful Cache cleaning programs:
Cache Out X free
Tiger Cache Cleaner not free
OnyX
free
Thank you for your very prompt reply. I will follow your suggestions and post back. No, I do not use any other programme such as you have suggested. I usually put my computer to sleep overnight.
However, maybe I have discoverd a clue. When I opened e-mail Back Up just now, I got a message:
"Please finish editing and close the editing window before openiong a back up."
I fear I may have been working on an e-mail while thye Back Up was in progress. Coulod this have been a cause?
I also note that my back up programme dialogue box now tells me that there are no scheduled back ups for e-mail or for my home folder. I hesitate to instruct it to continue with back ups until I find out whatt the problem is.
Your help is greatly appreciated.

I cannot open my mail box in the mail app

Hi, I cannot open my mailbox in the mail app on my I pad 3. It is asking to verify the email adres for my apple ID. When I log in again it still says I I have to verify myself. I dont understand it any more. Can somebody help me?

Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Remove apps from Recently Used (multi-tasking) list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.

Cannot open mailbox system attendand- randomly

Hello,
our environment have Exchange 2013 with CU7 installed, and lately receive weird problem that is not persistent but it unexplained.
All databases mounted that are in DAG, all arbitration mailboxes good, in ADSIEDIT checked homeMDB, and it is not set, however, i dont know is this relevant because sometimes is failing, sometimes is success.
When we run user creation we randomly get error:
Cannot open mailbox /o=ORGANIZATION/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=SERVER/cn=Microsoft System Attendant. CategoryInfo: NotSpecified: (:) [Set-MailboxRegionalConfiguration],
MailboxUnavailableException, FullyQualifiedErrorId: [Server=SERVER,RequestId=ba479b62-bda0-4c55-9347-9279f6121d62,TimeStamp=3/18/2015 7:57:29 PM] [FailureCategory=Cmdlet-MailboxUnavailableException] 45AC6FDA,Microsoft.Exchange.Management.StoreTasks.SetMailboxRegionalConfiguration
Googled many answers, tried many workarounds, and I'm out of ideas now, so any suggestion will be more than welcome!
Thanks,
Ivica

Well, i would do that, except that Exchange 2013 don't have System attendant service.
Also, we have 6 databases, how do i know which one to put in homeMDB field?
I did as you instructed anyway for test and still receive error:
<?xml version="1.0"?>
<Objects>
<Object Type="System.Management.Automation.PSCustomObject">
    <Property Name="message" Type="System.String">Can't create user</Property>
    <Property Name="detailMessage" Type="System.String">Cannot open mailbox /o=secureemail/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=SERVER/cn=Microsoft System Attendant. CategoryInfo:
NotSpecified: (:) [Set-MailboxRegionalConfiguration], StorageTransientException, FullyQualifiedErrorId: [Server=SERVER,RequestId=557e3eb8-ddbb-44c9aab1-d18c0682beb5,TimeStamp=3/19/2015 2:45:32 PM] [FailureCategory=Cmdlet-StorageTransientException] 2CC71ED6,Microsoft.Excha
nge.Management.StoreTasks.SetMailboxRegionalConfiguration</Property>
    <Property Name="responseCode" Type="System.String">400</Property>
</Object>
</Objects>
Keep in mind that servers are in remote AD sites, replication and AD health is good!
This is script that is failing:
$ErrorActionPreference = "Stop";
try{
Add-PSSnapin Microsoft.Exchange.Management.PowerShell.SnapIn
$OrganizationName = "[email protected]" #User defined mail address
$organizationUnit = "OU=$OrganizationName,OU=users,DC=domain,DC=priv";
$name = "John"
#this should be asked in web interface (firstname)
$lastname = "Dpe"
#this should be asked in web interface (lastname)
$displayName = "John Doe" # this is display name in OWA and in all address books
$logonName = "john"    # this will be users choosen logon name (before @externaldomain.com)
$ExternalDomain = "example.com"        #this value user will enter as his wanted username and will use it together with his external domain name [email protected]
$UPN = "$LogonName@$ExternalDomain"   #this should remain to be done automatically and under assumption domain is provisioned!!
$DomainController = "server"   #this value must be specified based on domain controller in AD site where user will be created
$nonadmin = "$OrganizationName All Users"; #This is field for entire tenant management and members are used for calendar sharing
$database = "database"
$retentionPolicy = "DoNotRemove"
$customattribute1 = "$OrganizationName" #Add for possible manipulation of tenants for future need
$customattribute2 = "ServiceID"
$customattribute3 = "ContactID"
$customattribute4 = "ClientID"
$password =ConvertTo-SecureString 'Password123' -AsPlainText -Force
$mailbox = New-Mailbox -DomainController "$DomainController" -RetentionPolicy $retentionPolicy -UserPrincipalName $UPN -Name "$name $lastname" -OrganizationalUnit "$organizationUnit" -Password $password -FirstName "$name"
-LastName "$lastname" -Displayname "$Displayname" -database $database -ResetPasswordOnNextLogon $false #This is part where user is created
Start-Sleep -s 2;
Add-DistributionGroupMember -Identity "$nonadmin" -Member "$UPN" -BypassSecurityGroupManagerCheck -DomainController "$DomainController"      #at this line user is placed in distribution group and
that group is used for additional security
Start-Sleep -s 2;
Set-Mailbox -AddressBookPolicy "$OrganizationName ABP" -Identity "$UPN" -DomainController "$DomainController" #from this point user gets his address book and isolation part.
Set-Mailbox -Identity "$UPN" -DomainController "$DomainController" -EmailAddressPolicyEnabled:$False #disables force of address policy
Set-Mailbox -identity "$UPN" -PrimarySmtpAddress $UPN -DomainController "$DomainController" ; #assigns default mail address
Start-Sleep -s 2;
Set-CASMailbox -identity "$UPN" -OwaMailboxPolicy Default -DomainController "$DomainController" #In this policy it is defined that user cant manage his password, as any future change will be managed globally here and automatically
applied to all users
Set-MailboxRegionalConfiguration -Identity "$UPN" -Language en-us -DomainController "$DomainController" -Confirm:$False
Set-MailboxFolderPermission -identity ${UPN}:\calendar -User default -accessrights none -DomainController "$DomainController"
add-MailboxFolderPermission -Identity ${UPN}:\calendar -user "$nonadmin" -AccessRights AvailabilityOnly -DomainController "$DomainController"    #only members of classic users can see free/busy
set-mailbox -identity $UPN -customattribute1 $customattribute1 -customattribute2 $customattribute2 -customattribute3 $customattribute3 -customattribute4 $customattribute4 -DomainController "$DomainController"
$mailbox | Set-CasMailbox -DomainController "$DomainController" -ActiveSyncEnabled $true -PopEnabled $true -ImapEnabled $true -OWAEnabled $true -MAPIEnabled $true; #adding script for created user to be returned after creation

On 10.4.11 Mac Mail I get this: Mail cannot update your mailboxes because your home directory is full. You must free up space in your home folder before using Mail. Delete unnedded documents or move documents to another volume. I can't open mail.

On 10.4.11 iMac Mac Mail I get this message: "Mail cannot update your mailboxes because your home directory is full. You must free up space in your home folder before using Mail. Delete unneeded documents or move documents to another volume." I can't open mail to do this. I have reinstalled software but no effect. How do I get into Mail to delete?

Found this on the "more like this" Worked like a charm!
With the Mail.app quit and using the Finder, go to Home > Library > Mail. Copy the Mail folder and place the copy on the Desktop for backup purposes.
Go to Home > Library > Mail > Envelope Index. Move the Envelope Index file to the Desktop.
Launch Mail and you will be prompted to import mailboxes. Select OK and allow the import process to complete.
After confirming all mailboxes were successfully imported and available, you can delete the copy of the Mail folder and old Envelope Index file from the Desktop and this should resolve the problem.

HT204382 MAC PRO10.6.8 just downloaded file sent 5/2010 "BoogieWoogie" (4-wmv) I could play it then, but now it says I cannot open because its not in a format that Quicktime Player understands that I have to install addit'l software to open this type of

MAC PRO10.6.8 just downloaded file sent 5/2010 "BoogieWoogie" (1-wmv) I could play it then, but now it says I cannot open because its not in a format that Quicktime Player understands that I have to install addit'l software to open this type of file??? WHAT software and WHERE do I find it to download?
calico6

Free VLC player for the Mac, check out the Icecast Radio Directory also
http://www.videolan.org/vlc/download-macosx.html
And if it's copy protected then
http://www.telestream.net/flip4mac/
If anyone is running 10.8. or later, then they might have to right or control click on the installer or app to "Open" to bypass Gatekeeper controls at least once, then it learns it's a ok to be trusted program.

Cannot open mailbox, Get-CalendarProcessing error

Hi
I am running a native Exchange 2010 environment and I created a room mailbox resource in Exchange. However I am receiving the following error when I try to view the properties
Cannot open mailbox /o= /ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=server/cn=Microsoft System Attendant. It was running the command 'Get-CalendarProcessing -Identity 'domain.com/Exchange/Resource Mailboxes/Resource-Mailbox-Name'
-ReadFromDomainController'.
I have two databases in my Exchange environment. Could you please advise on how to resolve this issue, also why is this happening.
Thanks

I don't know how this has been marked as the answer, as it is NOT an answer.
Which service is unable to contact the GC? What are we supposed to be restarting?
I personally get this error when I create some resource accounts programmatically. I get the error if I try and open the resource information tab in the GUI. I also get the error if I try and run "get-mailboxcalendarconfiguration" in Powershell against the
same mailbox.

Mass Additions Interface - cannot open prepare mass additions

Hi ,
We have loaded assets details to Mass Additions Interface using ODI, but we cannot open the prepare mass additions window in the applcations.
When I checked it has all the details when compaired with an asset loaded to the interface with WebADi EXCEPT the MASS_ADDITION_ID,( CAN IT BE THE ISSUE)
what could have been the reason for this type of thing?
Thanks and Regards,
MPH

Hi,
I believe you need to define another table which maps the Old Category ID with New one. Use ODI to map the Data and this Temp table to Mass additions.
Regards,
Sridhar

Cannot Open Additional Mailbox

Similar Messages

Maybe you are looking for