Cannot open any Pages documents made prior to upgrading to Yosemie. Pages does not appear in the iCloud list in system preferences.

Upgraded to Yosemite. Upgraded Pages to latest version. Uninstalled older versions of pages (made with iWork '09). Now I cannot open any Pages documents made prior to upgrading. I keep getting the same redundant message: "You need a newer version of Pages to open this document. You can download the latest version of Pages from the Mac App Store." Not sure if this is relevant, but Pages does not show up in the iCloud list in systems preferences.

Ok, I found pages on the iCloud drive. But the behavior of Pages is still the same, problem unchanged.

Similar Messages

  • I recently updated to the OSX 10.8.3 Operating Sistem.  I am writing a book and now cannot open any word document I've created.  Could not find a newer version of the Microsoft Word Processing Program.  Is Pages the next thing? Can I recover my documents?

    I recently updated to the OSX 10.8.3 Operating Sistem.  I am writing a book and now cannot open any word document I've created with the old system.  Could not find a newer version of the Microsoft Word Processing Program.  Is Pages the next thing? Can I recover my documents?  How?

    I'm in the same boat: new to OS X and Mac, and in the middle of a book. I switched because I heard about the the ease of using Mac, but so far, for me, it's been a nightmare. I bought 2011 Office Mac and hate everything about it, the most recent being the inability to open or cut or paste any of my original word files. I understand that this could have easily been done with earlier versions, but not Mountain Lion (which I learned is what OSX is.) Since I work with language, I am amazed at the assumptions of the Apple community. It helps to use common language and explain even the basics.  
    So all the helpful hints to use the latest version of Office Mac are to no avail. Now what?

  • Using Adobe Reader, I cannot open any adobe documents, Message indicates missing plug-ins. Please help... Thank you

    Successfully downloaded Reader on to my PC (Windows 7 Home Premium 64 bit).    However, I cannot open any adobe documents,    Message indicates missing plug-ins. Please help... Thank you,
    Theyankfan

    Hey Joseph Curcio,
    You might be viewing the PDFs in your browser only where Adobe Reader plug-in is disabled.
    Please try opening the PDF file using Adobe Reader and then check.
    Let me know in which browser are you trying to view the PDFs so that I can help you out enabling the required plug-ins.
    Regards,
    Anubha

  • The application "Microsoft Word" can't be opened-600. I cannot open any word document anymore. do not know what to do...please help

    The application “Microsoft Word” can’t be opened-600. I cannot open any word document anymore.  Every time this message appears. I went to apllications and open a new document but my word icon cannot open. Please help
    Thanks
    valerie

    Word can't open or does it open but you can't open documentts?
    If you have Office does Excell or Power Point open? If they do you can perhaps check for updates with either of them: Help > Check for Updates. You can also try to reinstall Office with your installation disks. Don't delete Office, just try to install it again.

  • I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start M

    I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start Menu, Task Manager, System Tray, or anywhere else. When I try to open a file, the site tells me Flash player is not installed. I have even downloaded it to a separate folder and ran the install with IE shut down completely. And Shockwave in ENABLED but in 32 bit .I have been trying to get this to work for about 3 weeks now.  HELP!!!

    Flash Player is a browser add-on, not an executable program.
    If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
    Note that the download is the player, not an installer, so you will need to make the file association manually.

  • My device does not appear in the iTunes window.  Instead a separate window opens so I cannot sync

    My device does not appear in the iTunes window.  Instead a separate window opens so I cannot sync my device.  I have tried with both my iPad, my iPod and my iPhone.  In each case a separate window opens showing that it is fully connected to the computer, but it does not open in iTunes. 
    I have followed previous instructions to stop then start the device manager.  I have even uninstalled then reinstalled iTunes, but no luck.  Can someone help??

    Hello Linda Lev,
    It sounds like Windows recognizes that your devices are conneted, but iTunes does not. I recommend the troubleshooting from the article named:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Payslip does not appear on the Self Service Page

    Hi all ,
    I would like the system to display the Payslip of an employee on his self-service page so that when the user logs in he or she can view his/her Payslip.
    When i click on the Function Payslip it says ERROR on Page.
    I have Run International HRMS Global.And as the organisation is in Africa it doesn't have any specific localisation.
    So can anyone assist me on how can i customize the JSP page so that the Payslip appears on the Self-Service page of an employee.
    Thanking you in advance,
    Chetan

    ypu have posted the same query in HRMS, few people have responded to that thread
    Payslip does not appear on the Self Service Page

  • Steady green light on A1084. Airport Utility 5.6 says set up is complete.   Airport Express base station does not appear in the menu bar, so I cannot select it.  Is there a fix?

    Steady green light on A1084. Mac OS X 10.7.5. IMac. Verizon DSL Actiontec GT704-WGB modem. Airport Utility 5.6 says set up is complete.   Airport Express base station does not appear in the menu bar, so I cannot select it and send a signal to airport express to play airtunes through my stereo amplifier.  Is there a fix?

    I plugged a model A1034 Airport Extreme Base Station into the Verizon DSL Actiontec GT704-WGB modem with an ethernet cable and now the AirPlay icon appears in the Itunes window immediately to the right of the volume control and I can select it and play Airtunes wirelessly through the A1038 Airport Express Base Station in another room connected to a stereo amplifier by a Monster mini-to-RCA left/right audio cable running from the output jack on the A1034 Airport Express Base Station into the CD jacks on the amp.  The problem is that I have to select the Apple Network Airport Express Base Station as my network in order to select the Airport Express Base Station when I click the AirPlay icon, which means I have no Internet signal to the Imac. If I select the Airport Extreme Base Station or the Verzion modem as my network, then I have an Internet signal to the Imac, but the Airport Express Base Station is grayed out when I click on the AirPlay icon, so I cannot select the Airport Express Base Station and send tunes to the Airport Express.  It would be nice to play Airtunes while simultaneously accessing the Internet.  I don't understand your question about what program I am using for which I require AirPlay.  I am not learned about computers in general, and even less so about Macs than PCs.  I thought the program I was running was Itunes, and there was no separate program to run to use AirPlay for the purpose of sending a signal from the Itunes on the Imac to the A1084 Airport Express base station in a another room, and then out as described above to the stereo amplifier to listen to Itunes music remotely in the other room, without any kind of cable, wire, etc., connecting the Imac to the stereo amplifier.  I would guess that the most common use for the A1084 is to play Itunes through a stereo in another room without the need to run wires from the computer to the stereo.  I realize it would be easy simply to run a very long mini-to-RCA left/right audio cable across the floor connecting the Imac to the amp without the need to use AirTunes, Airplay or any kind of AirPort, but it would be both unsightly and a tripping hazard.

  • My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

    My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

    Press the escape (esc) key to exit full-screen mode.

  • Police does not appear in the left corner iMovie11 viewer, any idea?

    Police does not appear in the left corner iMovie11 viewer, any idea?

    Hi Bengt,
    actually I just found what is the problem, if I choose the Halo effect in the Title navigator (sorry if the words are not exactly it, mine is in French so I translate) I do not have the "show the polices" in the upper left corner of the viewer, but if I choose another one like a lateral effect, it appears and I can modify the polices and colors of my title. Go figure?!
    I spent maybe 2 hours trying to understand that, well I think it is a glitch, but maybe just on the French version, I don't know.

  • I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imp

    I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imported the colour swatch as just 4 colours as a mulib file.  I drag the four colours on to the muse page in design view but that is as far as I get.  Can anyone help?  Thanks

    I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
    everyone allow read, write
    Details in the manpage for chmod. The actual steps are left as an exercise.

  • When I open iTunes my iPod nano does not appear in the list of divides so that I can click on what I want to since.

    When I connect my Ipod Nano to my Mac it does not appear in the list of devices, so I can't check what I want it to sinc, such as music videos. It will sinc thr music automaticlly. I can't tell it to sinc anything else.

    the same exact thing happens to me except that when i plug it in it tells me not to disconnect it. i had a friend who told me to leave it plugged in no matter how long it took.. i waited for 5 hours or more for my ipod to do something and i got so mad i just disconnected it.it didn't do ANYTHING AT ALL. so, if someday you find out how to make yours work.. can you tell me please? i'm desperate!
      Windows XP  

  • Recently when I install apps, the icon does not appear on the menu screen, also, it shows that it is down loading at the app store and when complete, I can not open it or reinstall it.  Help Please   o,

    Recently when I install apps, the icon does not appear on the menu screen, also, it shows that it is downloading at the app store and when complete, I can not open it or reinstall it. Has happened on the last 4 free apps. Help Please

    Reset your iPad. Press and hold both the power and home buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till you iPad starts on it's own. Now try and download an app.

  • When i open my ipod i see big red x and my ipod does not appear in itunes what can i do???

    When i open my ipod i see big red x and my ipod does not appear in itunes what can i do???

    iOS: Device not Recognized in iTunes for Windows

  • My back button does not work because the prior screen does not appear in the history.  I therefore must go back to the blue screen and reload safari.  Apple tech support could not help.  Can anyone else help?

    After I installed mountain lion my back button frequently does not work because the prior screen does not appear iunder History.  Apple tech support was not able to fix the problem.  Does anyone have any suggestions?

    lbryan1987 wrote:
    I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
    You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
    there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
    Seriously? It's physically broken!

Maybe you are looking for

  • Is there a way to update the itunes match to reflect changes that i have made on my computer

    Every time i update itunes match it looses my alterations to my playlists and undoes any alterations to any albums i have made. Is there a way to update the itunes match to reflect changes that i have made on my computer?(Only copies new playlists an

  • Unable to call another program in servlet

    Hi, I'm developing a Java program in Netweaver. It is a servlet program. External server will call this servlet program to pass the value in and then i use the value and pass to a stateless session bean. But now i'm required to make some change but i

  • Vendor evaluation - Confirmation Date

    Dear all, am trying to run vendor evaluation for - confirmation date.. i have create a new confirmation  spro - MM -purchasing - confirmations - define external conf , setup conf  control i have included this confirmation in the PO ..delivery date in

  • Partial backup question

    Hallo developers. We are testing the partial backup procedure and we have some doubts. We would like to know how the partial backup is made consistent; if during the operation of backup (the copy of the jdb files) the application writes to the last j

  • Trouble writing CFML to a file

    I am trying to create a CFC that will write a file with CFML in it using code like the following example...     <cffile action="write" file="C:\ColdFusion8\wwwroot\T\test.cfm" output="<cfmenu name=""test"">"> but ColdFusion keeps trying to read what