Cannot open aperture-There was an error opening the database for the library "/Volumes/TKR HITACHI /HI12.aplibrary".

When I try to open Aperture 3- I get this message : There was an error opening the database for the library...(name of library).
The last time I tried to open the library I got a window requesting a conflict in library data. It ask if I wanted to resolve it. So I pushed the repair button.
Thanks in advance for your help !!

William,
Thanks so much for your reply.
When first hooked up I reformatted the external as Mac OS Extended Journaled within Disk Utility.
I am not sure what HFS+ means. Can you help me there ?
Tom Rodgers

Similar Messages

Access denied to Aperture backup on external drive. When I hold the comman key adn open aperture to acces a remote drive I receive the message "There was an error opening the database for teh library "/Volumes/VERBATIM HD/Aperture Library BU.aplibrary".

When I attempt to open an Aperture backup on a remote drive using the Command key when opening Aperture., I receive the message-
How do access these files?

How do I copy the libray onto another drive? Drag & drop? Can I put it onto my iMac drive without loosing the Aperture files already there?
yes, you can drag the library to your internal drive. if it has the same name as your current Aperture library rename it or drag it to a different folder.
I followed the instrucitons when formatting the drive, although I would not rule out an operator error
You can see the name of the file system on the drive, when you select the drive in the Finder and press the key combination ⌘I (for File > Get Info). The file system will show in the "General" brick of the Info panel.

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported".

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported". What does that mean? I am trying to drag libraries (with metadata) to external HD...wondering what the best way to do that is?

Kirby Krieger wrote:
Hi Shane. Not much in the way of thoughts - - but fwiw:
How is the drive attached?
Can you open large files on the drive with other programs?
Are you running any drive compression or acceleration programs (some drives arrive with these installed)?
Can you reformat the drive and try again?
Hi Kirby,
I attached the UltraMax Plus with a USB cable. The UltraMax powers the cable so power is not an issue. I can open other files. Also, there is 500GB of files on the drive so I cannot re-format it. Although, I noted I could import the entire Aperture Library. However, I do not want to create a duplicate on my machine because that would be defeating the purpose of the external drive.
Thanks,
Shane

When i try to open aperture, i get a box popup that says; Warning-There was an error opening the database for the library "~/Pictures/Aperture Library.aplibrary".

When i try to open aperture, i get a box popup that says;
Warning-There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”.
Can anyone help? I cannot accesss aperture. this is the 1st time this has ever happened...
thanks,

Try running a repair on the library. Hold the command and option keys down while starting Aperture, this will open the repair window. Select Repair Library.
See Aperture 3: Troubleshooting Basics
If you still have problems post back

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

Another "there was an error opening this document. this file cannot be found"-question

Hello people, as the title suggests, i have another question regarding the "there was an error opening this document. this file cannot be found" error. I have searched on Google and on these forums but i havent found an answer to my particular case (sorry if i overlooked it).
I work at a supportdesk for a company that uses Windows XP with Adobe Reader version 8.1.3.
Users are getting this error when they access a PDF file placed on a (mapped) networkdrive. Contrary to some other cases i have found on this forum, spaces are handled without a problem. But a comma in the name of one of the folders that contain the PDF file are what causes this error.
i.e.:
Opening the following path results in the error:
L:\X, Y & Z\adobe.pdf
Removing the comma so the path becomes:
L:\X Y & Z\adobe.pdf
works just fine.
So far our workaround has always been to simply remove the comma and move on, but I've been wondering why this comma is such a problem for Adobe Reader. As far as i know Adobe Reader is the only program we use that has this issue, M$ Word works just fine with it to name an example.
To sum my questions up:
- Why is comma (,) a problem for Adobe Reader?
- Have i missed any patches/new versions where this issue has been addressed?
- What is Adobe's stance on this, and are there any plans to "fix" this?

Ok, nevermind, we just found the problem
It's not Adobe Reader that is causing this, but another program the company uses to manage/distribute/authorise programs that users are allowed to access (Scense). I had never even considered another problem could have caused this for Reader.

Message'there was an error opening this document.The file cannot be found'

Using xp home and when I click to download the pdf file, it will give 3 options been 'open'/'save'/?. When I choose the 'open' option, it will give me the above message "there was an error opening this document.The file cannot be found"
owever if I choose to "save" and I will be able to open the file and read it. In this pc its using Adobe Reader 8.1.2 with a patch. It was working fine prior to this sudden occurance of the error.
Strangely I have another pc with the same specification, I was able to choose "open" and be able to read the file. Can anyone help to resolve the issue by using the "open' option instead of "save, then open". Greateful for your prompt response.

Fyi, in addition to my earlier post, the other pc is using Adobe 8.1.1 and no other patch. I was trying to find 8.1.1 version but could not find a trust worthy site to load from. Do you think the error caused by using the 8.1.2 version? Thanks

There was an error opening this document. This file cannot be found

An automation script on one of our QA environments kept tripping on the error: "There was an error opening this document. This file cannot be found". The same script ran fine against our Production servers (hint, which were "whitelisted").
It took a little time to resolve/trace what was happening (but with the aid of ProcessMonitor and tracing all "pdf"-related file activity...)
The problem lies squarely between McAfee (75%), Adobe (20%) and Microsoft (5%):
NORMAL WORKFLOW. IE (Internet Explorer) when popping a PDF document, has to (1) write the document to the IE cache, then (2) launching and "handing off" the document reference to the Adobe viewer (which might then be able to open the document, et al) -- assuming largely a "synchronous" workflow.
BUT "WAIT", HOLD THE HORSES -- McAfee takes ownership and decides infact "wait for us" (during the workflow), it wants to first perform a virus scan on the document (ahead of writing the document to cache) involving potentially large latency (delay) before making the document available to the system. However, instead of "fessing up"-that their scan may be taking too long, McAfee appears to have taken their work "off-line" in violation of the sychronous interface above. I'm guessing the developers at McAfee might have been trying to hide any extra processing overhead being incurred by assuming they could somehow convert this to an "asychronous" event. (This may also have more reach than just PDF's.)
Unfortunately, the browser's "PDF OPEN"-dialog box pops allowing Adobe to launch-and-open the "as-yet-not-virus-scanned-and-thus-not-yet-cached"-document. Thus clicking the OPEN-button will cause the related "...FILE NOT FOUND"-error to be seen (because the file is still in McAfee "limbo").
Note: If you close the ADOBE reader (but don't yet close the popup-OPEN-dialog) you can click OPEN a second time and it will probably now open the document - which McAfee finally finished scanning!
You can observe all these interactions with ProcessMonitor, and use the monitored file states to adjust the timings of events to reproduce both the failure and non-failure scenarios.
- Best Regards, Ziggy
ps. My assessed distribution of "ownership" of the problem is because ALL these parties should be aggressively resolving this for the customer-base!

What, exactly, were you trying to do when you got it, and how?

I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library "~/Pictures/Family IIi.aplibrary". Please help, thanks

I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library “~/Pictures/Family IIi.aplibrary”. Please help, thanks

Are all three libraries under your account or are they in different accounts? Any other errros on the system?
Start by doing the permission repair and library repair steps in Aperture 3: Troubleshooting Basics

Adobe reader: there was an error opening this document. this file cannot be found.

Windows XP Professional sp2 machine
512 memory
ie sp2
when opening two pdfs from a website links receive the error, "there was an error opening this document. this file cannot be found"
If you save the file to the pc, then open the .pdf it opens ok
other pdfs open ok from browser from same website and different websites
had customer try on another's machine; the two pdfs opened ok
tried Adobe Reader 8.1, 9.0, and Adobe Professional 8.0
uninstalled reader and professional; deleted directories; reinstalled reader and professional(placed into a separate directory); same error
On the machine tried admin accounts, under customer's profile made admin account, renamed the customer's account so that another account was freshly generated, all generated the same error.
Ran ccleaner to clean up files in the registry and temporary internet files, then repaired adobe - same error
repaired internet explorer - same error
scoured web for same error but most were applications trying to open the pdfs, a few errors were for programming php, a lot of questions but few answers in context of current issue. the ccleaner and repairing ie were resolutions i found on the web.
nothing was listed in msoft's ie knowledgebased searched.
any help would be appreciated.

I get the same message when I try to open a pdf attachment in my free AOL e-mail account. This problem just started today for some unknown reason. I have Adobe Reader 9 and never had a problem before. If I forward e-mails with a pdf attachment to my Road Runner account, I can open it with no problem. I can't seem to find any answers to this problem. Frustrating! HELP!!!

Error Message: There was an error opening this document. Acrobat cannot open this file because a task is still active in Acrobat.

I've tried Command Q to close; Tried Adobe Reader Tool Bar but closing is grayed out; I'ved held the power button for hard close, but everytime I try to open a .pdf I get this message:
There was an error opening this document. Acrobat cannot open this file because a task is still active in Acrobat.
I'm not extremely technical, but I can follow directions if someone can help!
Thanks

Looks like it got stuck.
You can switch to another program or the Finder (click on desktop) and Apple menu > Force Quit > Adobe
You can press and hold the power button, it's a emergency force shutdown which you can boot normally and it should be fine.

I downloaded Aperture and now I'm getting a "There was an error opening the database for Library " and I can't do anything else. How can I fix it so I am once again able to run Aperture?

I Downloaded Aperture from the Apple Website then proceeded to download all my picture's frp, IPhoto. The very next time I opened Aperture an error poped up stating, There was an error opening the database for Library "blank". I can't do anything with the program but hit the cancel buttom which closes the program. How do I fix it?

Is "blank" the name of your Aperture Library? If not, then Aperture is pointing to the wrong Library. Hold down the option (⌥) key while you launch Aperture by clicking it in the Applications Folder. Then select the correct library and press the "choose" button.
If that does not help, try to repair your library:
Locate Aperture library in Finder. Holding down the keys option (⌥) +command (⌘) and double click on Aperture Library to show the First Aid dialogue:
Then try to start Aperture again. If that also should fail, try the other steps in Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
Good Luck
Léonie

Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop After restart error message appears: - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

AIR, Acrobat/Reader XI 11.0.06 - There was an error opening this document. This file cannot be found

Hi,
After Adobe Reader and Acrobat updated to v11.0.06 I've started getting the following error message when I try to load PDF file into my AIR application on Windows (Vista and 7) machines: "There was an error opening this document. This file cannot be found."
I'm loading PDF just like it's been described in Flex/AIR documentation. HTMLLoader loads html that looks like: <html><body><object id="PDFObj" data="app:/pdfs/test.pdf" type="application/pdf" width="100%" height="100%"></object></body></html>
The file is in place and I've tried opening it from the Reader itself without any errors. When I uninstall Reader XI and install Reader X instead everything comes back to normal and the file is opened without an error.
What was changed in the Acrobat/Reader 11.0.06 that it prevents PDFs from being opened from AIR application? Or was it changed even before 11.0.06?
Kind regards,
Roman

Fyi, in addition to my earlier post, the other pc is using Adobe 8.1.1 and no other patch. I was trying to find 8.1.1 version but could not find a trust worthy site to load from. Do you think the error caused by using the 8.1.2 version? Thanks

Aperture (3.4.1) no longer opens and the following message appears: There was an error opening the database for the library "/ Users / Andrea / Pictures / Aperture 3 Library.aplibrary." How can I solve this problem? Thanks

I was using Aperture (3.4.1), when he appeared a notice that asked me to stop the Mac with the power button. When I restart Aperture no longer opens and the following message appears: There was an error opening the database for the library "/ Users / Andrea / Pictures / Aperture 3 Library.aplibrary."
How can I solve this problem?
Thanks

After a system crash your Aperture Library may be corrupted, because Aperture may not have been able to finish the ongoing database transactions.
Have you tried the Aperture Library First Aid Tools?
Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
Try "Repair Database", and if this does not help: "Rebuild Database"
Regards
Léonie

Cannot open aperture-There was an error opening the database for the library "/Volumes/TKR HITACHI /HI12.aplibrary".

Similar Messages

Maybe you are looking for