Cannot Open catalog

I get the error message Lightroom catalogs can not be opend on network volumes, removable storage or read only volumes. How can I fix this problem......

Move youur catalog to a local drive, a direct (not networked) connected external hard drive and make sure that either have read/write permissions.

Similar Messages

Cannot open catalog Error

I just downloaded Windows Embedded 8 Standard Toolkit. I ran Setup.exe and installed it on my Windows 7 64-bit computer. When I open ICE and click on "Create New Configuration File" and select the defaults of OS (x86) and 6.2.9200.16384 (OS Version)
then click "Create" I get an error:
Cannot open catalog: C:\Windows Embedded Catalog
Details: Failed to load settings from subcatalog
The directory C:\Windows Embedded Catalog exists and I see x86 and the OS version under it.
I tried reinstalling and repairing but still get this message.
I would appreciate some help,
Todd

Hi,
I am not sure if this a good thing to do but I am trying to get this working. I ran:
catman /rebuildindex c:\Windows Embedded Catalog
and it it ran for a bit and said:
Error Rebuilding index: only 297 out of 1539 items have been reindexed.
Below is the very end of catmanLog.txt
343240 342952 2015:4:5 23:48:41:852 base\embedded\toolkit\embeddedmmi\src\mmi.cpp(407): UnPacking c:\Windows Embedded Catalog\6.2\9200.16384\x86\modules\FeaturePack\Microsoft-Windows-Embedded-directoryservices-adam-snapins-admin-Package~31bf3856ad364e35~x86~~6.2.9200.16384.cab
343240 342952 2015:4:5 23:48:41:888 base\embedded\toolkit\embeddedmmi\src\mmicabmoduleparser.cpp(53): Failed to extract manifest from cabinet file: c:\Windows Embedded Catalog\6.2\9200.16384\x86\modules\FeaturePack\Microsoft-Windows-Embedded-directoryservices-adam-snapins-admin-Package~31bf3856ad364e35~x86~~6.2.9200.16384.cab
(hr=0x8007065e) Data of this type is not supported.
343240 342952 2015:4:5 23:48:41:889 base\embedded\toolkit\embeddedmmi\src\mmi.cpp(536): Failed to load module from c:\Windows Embedded Catalog\6.2\9200.16384\x86\modules\FeaturePack\Microsoft-Windows-Embedded-directoryservices-adam-snapins-admin-Package~31bf3856ad364e35~x86~~6.2.9200.16384.cab.
343240 342952 2015:4:5 23:48:41:891 base\embedded\toolkit\embeddedmmi\src\mmi.cpp(862): Failed to import items to c:\Windows Embedded Catalog
343240 342952 2015:4:5 23:48:41:893 catman: END
343240 342952 2015:4:5 23:48:41:893 Time Elapsed: 00:00:23
Does this help at all?
Todd

Cannot open Catalog Manager and Job Manager on Windows 7 (11.1.1.6.2 BP1)

Hi,
We recently upgraded to OBIEE version 11.1.1.6.2 BP1 and installed Client tools from the same version (downloaded from Oracle Support). Once installed, ODBC connections are created to connect to the BI Server and we are able to connect to BI Server using Administration Tool. But Catalog Manager and Job Manager are not opening.
Is there any setup missing to make Catalog Manager and Job Manager work?
Thanks in advance.

Hi,
It is a known bug. Please find the solution here.
http://123obi.com/2013/02/unable-to-open-catalog-manager-obiee-11g/
Cheers,
Kalyan Chukkapalli
http://123obi.com

Cannot open catalog in Lightroom

I just subscribed to Creative Cloud and downloaded Lightroom (as a replacement for Aperture). I started with the video tutorial "How to manage your digital photos". However, I cannot get Lightroom to work at all. It downloaded OK but when I opened it for the first time, I didn't get any popup asking me what country I was in. Instead, I received an error message:
An error occurred when attempting to change modules.
I can see that it has created a Lightroom folder in Pictures with two files - Lightroom 5 Previews and Lightroom 5.lrcat. I thought these may be corrupt for some reason so I created a new catalog Lightroom 5. Again same error message but I can see a folder 'Lightroom 5' containing two files Lightroom 5 Previews and Lightroom 5.lrcat.
I tried opening Preferences to see if there was anything in there that may help fix the issue but Preferences won't open.
I'm running a Mac with OSX Yosemite and 8GBs of memory ...

Hi Geoff,
I looked again, but do not see:
HD/Users/[your username]/Library/Preferences/
Like I mentioned, I have:
HD/Users/[your username]/Shared/Library/Preferences/
and
But if I try to create a folder called Library in the path mentioned in Victoria's article, it tells me that it already exists...
Also, I've searched for the file com.adobe.Lightroom3.plist and cannot find it. I did find the file com.adobe.Lightroom5.plist, removed it but still get the same error...
Thanks for the support,
HPH

Upgraded from Elements 6 to 10, cannot open catalog

How can I open my version 6 catalog in version 10? Browsing to custom location the program does not "see" it in the file. I would rather not do the "watch folder" thing.

I thank you all for your help, yet it still won't open. I have included some screen shots so you can see what I see.
Browsing via Win Explorer to file location....There is the PSEDB file.
Catalog Manager view....
After clicking "Convert"....
After clicking " Find More Catalogs" and navigating to the file location...
As you can see, the file does not show up.
This completely stumps me. I have had to reload PSE before and never had a problem opening a catalog from a custom location. Any onther ideas? Again, thank you for all your help.
Adam

Reader 9 cannot open catalog index created by Acrobat 9 (action)

I am making a CD of a collection of PDFs. I have created a catalog index (.pdx) with Acrobat 9. I have also created a title document with Acrobat 9 with a button which runs the action "Execute menu item" which opens the .pdx index file for searching the collection via the action command "Open a file ->%path%<filename>.pdx. Everything works find when this CD is run on a machine which has Acrobat installed. I get a message asking if D:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe may be launched, and I say OK, and then the search window opens. When I try this action on a computer that has just Reader 9, I receive the message asking if D:\...\AcroRd32.exe may open the file. When I say OK, nothing happens. If I instead double-click on the .pdx file, the search window open OK. I would like to distribute this CD so that the search button works with either Acrobat or Reader installed. Thanks for any input. -GP

You can assign the .pdx index file in the properties of your title document.

Lightroom cannot open catalog becouse another application already has it open.

I aget a message that another application has the catolog open but I ahve no idea what has it open. Any idaes on how to figure out what program has it open?

This message is probably due to the fact that the so-called "lock-file" has not been deleted when you last exited Lr.
In your OS (Mac Finder / Win Explorer) open the folder that contains the Lr catalog. If you don't know where it is, see here for your OS: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-4.html
The Lr catalog is the file ending with < .lrcat>. Don't touch that one. But see if there is just besides it another file with the ending <lrcat.lock>. This is the so-called lock-file that prevents that Lr can be opened in more than one instances. It should be present when Lr is open but should not be there when Lr is closed.
If you see this lock-file while Lr is closed, send it to the Trash-Bin / Recycle Bin, i.e. delete it. You should then be able to open Lr.

Lightroom cannot open catalog because it cannot save to this location

I recently had the logic board replaced by apple yesterday.
I assume LR thinks this is a new computer.
Light room backups are located at such and such location and I know exactly where they are...(there is a whole string of backups but I had an issue deleteing those from another post....so not to go there right now)
SO....here are the 2 screen shots and my choices to avoid complete disaster:
Any ideas on this friday?

Try a Google search. Shouldn't be too difficult to find. Okay, here you go. But Google really can be your friend.
https://www.google.com/search?sourceid=chrome-psyapi2&rlz=1C1CHFX_enUS512US512&ion=1&espv= 2&ie=UTF-8&q=change%20permissi…

Cannot open message catalog LIBWSC_CAT

I'm posting a reworked version of an earlier question, hoping to get an answer this way.
I have compiled an executable that acts as a tuxedo client. When I run it, invocations to the function tpstrerror() work ok.
If I compile the exact same code as a shared object file and invoke some of its functions from a java virtual machine through JNI (the environment variables being the same), in spite of all other ATMI functions working correctly, tpstrerror() fails with the following error:
NLS:4: Cannot open message catalog LIBWSC_CAT, set 1, num 1142; check TUXDIR=/home/adrian/bea/tuxedo9.1, LANG=C
Does anyone have any ideas on what's happening here? Is there a way to get any information on why does the function fail?
My earlier post with additional details (might be too long) can be found at:
http://forums.bea.com/thread.jspa?threadID=300004539
Many, many thanks.

Hi,
My guess is that you have a firewall between your client and the Tuxedo system that is timing out the connection. The error is network error. Try looking at the -K option for the workstation listener WSL.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

NLS:4: Cannot open message catalog LIBWSC_CAT

Hi
I am not sure this is the right place to place my question. Please move it to right place.
I have an application on the unix (Solaris 5.8) and tuxedo 8 on which it runs fine but if I am using linux system to run the same application which is written in java with my tuxedo servers up. After running the application I am getting the below error.
ResourceException: NLS:4: Cannot open message catalog LIBWSC_CAT, set 1, num 1140; check TUXDIR=/home/lnx/env2/bea/tuxedo9.1, LANG=C
Category: Communications Name: NLS:4: Cannot open message catalog LIBWSC_CAT, set 1, num 1140; check TUXDIR=/home/lnx/env2/bea/tuxedo9.1, LANG=C
: Class: null
Id: null Description: NLS:4: Cannot open message catalog LIBWSC_CAT, set 1, num 1140; check TUXDIR=/home/lnx/env2/bea/tuxedo9.1, LANG=C
ResourceException: NLS:4: Cannot open message catalog LIBWSC_CAT, set 1, num 1140; check TUXDIR=/home/lnx/env2/bea/tuxedo9.1, LANG=C
Category: Communications Name: NLS:4: Cannot open message catalog LIBWSC_CAT, set 1, num 1140; check TUXDIR=/home/lnx/env2/bea/tuxedo9.1, LANG=C
: Class: null
Id: null Description: NLS:4: Cannot open message catalog LIBWSC_CAT, set 1, num 1140; check TUXDIR=/home/lnx/env2/bea/tuxedo9.1, LANG=C
ResourceException: NLS:4: Cannot open message catalog LIBWSC_CAT, set 1, num 1140; check TUXDIR=/home/lnx/env2/bea/tuxedo9.1, LANG=C
at connection.jni.JNIInteraction.execute(JNIInteraction.java:334)
at AccountLocateBean.get(AccountLocateBean.java:117)
at JavaBeanExample1.main(JavaBeanExample1.java:155)
I check my $TUXPATH and $TUXDIR points to the correct location.
In the ULOG ,I can see the my server (on which the required service resides) has restarted (CMDTUX_CAT:580: INFO: A server process has restarted: 7932).
I am not getting any core file with this error (limit coredumpsize unlimited) .
Our tuxedo version is 9.1
Regards,
Peeyush
Edited by: [email protected] on May 25, 2010 2:16 AM
Edited by: [email protected] on May 25, 2010 2:17 AM

Hi,
I don't think there are any patches related to the problem you are having, and it still sounds like an environment problem. I would suggest contacting Oracle customer support and they can tell you what patches are available as well as they may have a solution for your problem.
It is a little weird that you are having this problem on RHEL as I was using OEL which is based on RHEL. The major difference is I'm using Tuxedo 11gR1 on 32 bit machine.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Cannot open Message Catalog CMDTUX_CAT

Hi. I've just installed Tuxedo for Redhat 6.2, and I'm trying to set it up, and I'm stuck with 'simpapp'. I have this struct:
TUXDIR=/home/bea/tuxedo8.0
APPDIR=/applications/simpapp
when I run
tmloadcf ubbsimple
i get this error:
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 868; check TUXDIR=/home/bea/tuxedo8.0', LANG=en_US
any hints? I've already checked all the environment variables and they seem to be fine...I've also opened CMDTUX.text and I saw that msg 868 is some error about the configuration file, but first I'd like to have at lease the tmloadcf running ok....
thanx,

Hi.
Try posting your question on the tuxedo.general newsgroup. Most people on this newsgroup are dealing with WebLogic Server issues.
Thanks,
Michael
Rodrigo Laporte wrote:
Hi. I've just installed Tuxedo for Redhat 6.2, and I'm trying to set it up, and I'm stuck with 'simpapp'. I have this struct:
TUXDIR=/home/bea/tuxedo8.0
APPDIR=/applications/simpapp
when I run
tmloadcf ubbsimple
i get this error:
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 868; check TUXDIR=/home/bea/tuxedo8.0', LANG=en_US
any hints? I've already checked all the environment variables and they seem to be fine...I've also opened CMDTUX.text and I saw that msg 868 is some error about the configuration file, but first I'd like to have at lease the tmloadcf running ok....
thanx,--
Michael Young
Developer Relations Engineer
BEA Support

Issue: Cannot open message catalog LIBTUX_CAT

Hello
I am using a webservice that connects through Tuxedo. Tuxedo starts ok but when I call my service I receive the following error:
[13 Feb 2009 14:05:13 GMT][WARNING][][##: Exception raised in setting up security : : RemoteException : ][receive() failed (TUXEDO ERROR [12]: NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1322; check TUXDIR=/app/isel/tuxedo , LANG=C
); nested exception is:
com.iona.jbus.ntv.NativeIOException: receive() failed (TUXEDO ERROR [12]: NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1322; check TUXDIR=/app/isel/tuxedo, LANG=C
I googling for a while but could not get a clue to solve this.
Any help appreciated.
Thanks
J

Hi J,
Sorry, I'm still not following. When you say:
"2 - My service receives the call and calls to another webservice in a AS/400 using Tuxedo."
Are you saying you've written a Tuxedo service that makes a Web Service call to another Tuxedo service running on an AS/400 system? Let me try and ask some specific questions:
"1 - I call my webservice using SOAP UI"
What SOAP client are you using? Where is the Web Service you are calling running and what's it running under?
"3 - Inside the AS/400 that receives the call there is a TR application that calls a Listener Service that calls a cobol application."
What is a TR application?
In any case, as I said, the error you are getting is a TPESYSTEM error which should result in an entry being made in the Tuxedo ULOG file.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

NLS:4: Cannot open message catalog LIBWSC_CAT, set 1, num 1142?

os:Linux server 2.6.9-67.0.22.EL
tuxedo: BEA Tuxedo, Version 8.1, 32-bit, Patch Level 099
env
NLSPATH=$TUXDIR/locale/C
LANG=C
when run tuxedo program,and using the tpstrerror to display error message,
it always shows Cannot open message catalog LIBWSC_CAT, set 1, num 1142 such messages.
the same in ULOG too,
how to resolve the question?

it is probably because tuxedo msg files are generated by different gencat program.
it happens on a linux distros different then the officialy supported versions
a) strace your server: strace -o /tmp/err -f -p <pid> and check if it opens
succesfully the msg file
b) test msg file using sample program:
char *p;
nl_catd catid;
catid = catopen( "/opt/bea/tuxedo8.1/locale/pl_PL/LIBTUX_CAT", flag);
printf("%d %d %s \n",catid,errno,strerror(errno));
if (catid!=(nl_catd) -1)
p = catgets( catid, 1, 262, "message not found");
printf("%s\n",p);
and different env variables like NLSPATH, LC_MESSAGES, NLS_LANG etc

NLS:4: Cannot open message catalog LIBWSC_CAT, set 1, num 1037 error

HI,
I am getting this error when the client (Powerbuilder) sits idle for some time after performing few operation.
NLS:4: Cannot open message catalog LIBWSC_CAT, set 1, num 1037
The error is logged on Client side ULOG; the server side ULOG does not have any error .
Thanks@

Hi,
My guess is that you have a firewall between your client and the Tuxedo system that is timing out the connection. The error is network error. Try looking at the -K option for the workstation listener WSL.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

NLS:4: Cannot open message catalog TMADMIN_CAT, Solaris Container

Hello,
Can someone please help me ?
I have used Tuxedo 8 for many years on Solaris 8 servers, however we have now ported our installation to a Solaris 8 container on a Solaris 10 server. The server was ported using a flar image from the source server onto the new zone (or container). Tuxedo works absolutely fine in the container and the application appears to run as expected until I try using tmadmin or qmadmin on the command line and run a command in the shell and the following message appears for tmadmin, qmadmin message is similar.
NLS:4: Cannot open message catalog TMADMIN_CAT, set 1, num 111; check TUXDIR=/opt/apps/tuxedo/8.0, LANG=C
tmadmin/qmadmin performs the function but appears to be unable to open it's message catalog in $TUXDIR/locale/C
The mesasage catalog exists in $TUXDIR/locale/C and chksum's identical to source server.
I have manually re-installed the Tuxedo software in the container with no effect
I have tried installing Tuxedo in a different directory
I have tried setting NLSPATH=$TUXDIR/locale/C in the environent with no effect
The tuxedo application works fine with no similar messages in the ULOG from the running application, it is just tmadmin and qmadmin on the command line, using the same user as runs the application
localel settings are identical to original source server and :
localeLANG=
LC_CTYPE="C"
LC_NUMERIC="C"
LC_TIME="C"
LC_COLLATE="C"
LC_MONETARY="C"
LC_MESSAGES="C"
LC_ALL=
If i set $LANG = C and run tmadmin and run a command I get the following message instead
NLS:6: Message not found, catalog TMADMIN_CAT, set 1, num 1136
Which implies it can see the catalog but cannot open it
Tuxedo version is 8.0 Rolling patch 222
Can anyone help? i would be very grateful
Thanks
Adam

I have now worked arround this by re-generating the message catalogs from the catalog text files
cd $TUXDIR/locale/C
gencat TMADMIN_CAT TMADMIN.text
gencat Q_CAT Q.text
tmadmin and qmadmin now display the output ok, It kind of makes sense since the catalogs are generated in the new environment, but a full install still did not work.
The new catalogs are identical to the old catalogs and cksum identically, but they work. Still scratching my head over this one, but at least we can move forward now.

Cannot Open catalog

Similar Messages

Maybe you are looking for