Cannot open CS3 Help Files

Windows XP Pro; SP3; CS3
Following hard drive failure I downloaded CS3 to new hard drive. Individual applications downloaded and opened OK however I cannot access help file for any of the CS3 applications. When I open Indesign or Photoshop Help from the Help drop down menu, the Adobe Help Viewer 1.1 appears. When I fill in the Browse and Search boxes on the Viewer screen and hit enter, a list of help topics appears. When I click on any one of those topics, the Viewer screen remains empty with the exception of the cursor arrow and hourglass. How can I access help files for CS3?

Sounds like the uninstall using the cleanup tool was not complete (and I feel like we're leading you deeper into the abyss, but I don't know what else to tell you). I'd see if you can "repair" from the installer disk, or run the cleanup again.
As I said before, the CS3 installer was the worst in Adobe history and would fail for the slightest provocation. It's VERY important that nothing that could conflict is running while you install, and you should be logged into the Administrator Accont for best results. One of the things that I forgot to mention earlier as a known problem is flash player, and you should uninstall that. There was a special tool for one of the versions that was likely to be on systems running CS3, but I'm on the raod and this machine is not loaded with a lot of my reference materials, so I don't have that link. It will be mentioned in earlier threads about CS3 installation problems from several years ago if you search.
As for the the latest error message you see, if my memory is correct, that one is fixed with this: Flexnet Patch. The description would lead you to believe it works only on Vista, but it does run on XP (and I needed to use it myself at one point).

Similar Messages

Unable to view SAP Help files --Cannot Open Frameset.htm Files from 'help.s

Unable to view SAP Help files --Cannot Open Frameset.htm Files from 'help.sap.com'
Open Internet Explorer
Types in http://help.sap.com/
Click on mySAP ERP
Click on English
The webpage goes to
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
It shows the status done but what I see is just a blank page
I tried going to different areas of SAP Help files but no success
I cannot even open Help on Help http://help.sap.com/saphelp_erp2004/helpdata/en/3f/a42938955df162e10000009b38f842/frameset.htm
None of the other users have this issue

Hi
I am able to open your links. I think there is some problem in your internet explorer. please check
regards
Srinivas

Nikon d600, cannot open my NEF files in RAW. I have PS cs6. Please help!

I have a Nikon d600, Adobe PS cs6, and cannot open my NEF files in RAW. Please help!

In Photoshop, if you go to Help/About Plug-Ins/Camera Raw, what version of Camera Raw is reported? There should only be one version. And since you have Photoshop CS6 you could install Camera Raw 8.3.
Since you downloaded with the Nikon program, it could have changed your raw files such that they cannot be opened in Camera Raw. I understand there is a utility somewhere that will fix the files if that is the problem. But I don't recall how to find that utility.
Next time you have raw files to download, I suggest you use Lightroom to do the downloading from the card. I see no value in using any of the Nikon software to perform that task. If there is any chance that you still have the images on the card, I would suggest trying to download them again using Lightroom. But first you would have to remove the ones that you downloaded initially.

I cannot open some pdf files online with Reader XI (like sample forms in Help section).

I cannot open some pdf files online with Reader XI (like sample forms in Help section or IRS.gov or credit card statements). I have uninstalled Reader XI, cleaned and reinstalled. I have no problem right-clicking and downloading and then viewing the files. No problem viewing acrobat files. I'm runnnig Windows 7, IE9. I can acces them through Chrome.

RESOLVED
I found two suspect programs that were installed within the last 48-hrs that may have caused the problem
1) - Libre Office - latest update. This is a fork of Open Office. (unlikely)
2) - ManyCam video manipulation software (likely)
Following info here, I opted to try to open an Adobe PDF file that was on my hard drive. When I did, it refused and IE10 gave me an ActiveX error (AHA!!). When I checked the installation of ManyCam, it had installed a version of DirectX that may have over-written the resident versions or disabled them somehow.
I uninstalled ManyCam but left Libre Office's update in place, then I ran a system restore from a point 24-hrs before the installations.
This resolved the problem 100%.
So, the suggestion here is that there may be one or more program in the wild that is interupting the ActiveX or DirectX systems. They may be running or installing an older version. In this case it appears the handlers were broken.
Once the system restore had completed I was able to open Adobe PDF files within my IE10 browser from the Internet as well as open PDF files from my hard drive.
Note that this same issue also clearned up a problem I was having with the Comodo Dragon web browser, which is a fork of the Chrome project. Once I eliminated the suspect program and ran the system restore all was well. In the instance of the Comodo browser it was unable to open or reach anything - dead white screen below the menu bar.
So my suggestion would be to take an inventory of recent program installations, remove/uninstall them, run system restore from a date before the suspect programs were added, and see what happens. In my case that fixed the problem.

I need help! I downloaded the adobe reader XI from the internet and I still cannot open my pdf file

I need your help I downloaded adobe reader Xl and I still cannot open my pdf files. Please help as soon as possible I need it for work

When I try to open the file it just states that adobe is not responding. the file open up to the top of the page of the document but I cannot scroll down to read the document. Please I hope you can help me I followed the instructions.
[private data removed]

Please help i cannot open the pdf files of cic.gc.ca

please help i cannot open the pdf files of cic.gc.ca

Hi ooovvvaaaiiisss12345.
Are you trying to view the pdf's from the browser are after downloading it and viewing via Reader.
Please let me know the OS and browser you are using.
Are you able to view the pdf's on other websites?
Let me know what errors you get while viewing the pdf's

I am trying to now install a free trial of indesign because despite paying $50+ a month for this supposed service I cannot open an indesign file I've been sent and need to do work on it urgently. I have now signed in again for a free one month trial and i

i am trying to now install a free trial of indesign because despite paying $50+ a month for this supposed service I cannot open an indesign file I've been sent and need to do work on it urgently. I have now signed in again for a free one month trial and it claims to be downloading but this is not happening at all. I am on a Macbook Air and Abobe for my $600 a year membership you have totally ruined by Friday night. If there's a human being out there at Abode please respond now

Hi,
If you have already subscribed to the membership, please follow the help document below:
https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
Regards,
Sheena

Cannot open QB 2007 file after installing R7 upgrade

I installed the Quickbooks Pro 2007 "upgrade" and then tried to open my old Quickbooks Pro 2007 for Mac company file.
1.) It asks me if I want to Upgrade the file (no choice)
2.) Then it simultaneously says "Working" and gives me a warning about the file not being able to be renamed and that I have to rename it and save it in the QB folder.
3.) Then - whatever name I give it - it says it could not create the upgraded file.
4.) It also says that it could not open the existing file.
I'm not sure what to do - the file is only 4.7MB and I've tried every combination to get it to open.
Is there some trick? Nothing about this on the Intuit Forum. Nothing on Google either.
Help would be greatly appreciated as I cannot open my business file!

I guess what is happening is that I originally installed quickbooks and the company file on my macMini and I suspect that it is not opening it on my iMac because of a sharing violation.
I did unlock both the application and the files but they still won't open.
Any suggestions would be appreciated.

Mac Word 2008 - hyperlink message "Word cannot open the specified file"

I'm using WordMac 2008 version 12.2.5 and after following detailed instructions on how to hyperlink chapters in a Table of Contents to their respective chapters in a book, I can only get the message "Word cannot open the specified file".
Any ideas what could be wrong?
My OSX is 10.5.1.
The instructions I followed are pasted below and are copied from the Smashwords Style Guide: http://www.smashwords.com/books/view/52
START OF PASTE FROM SMASHWORDS STYLE GUIDE:
How to create a linked Table of Contents. Consider this feature in “beta.” My
thanks to Smashwords author Cheryl Anne Gardner for sharing these tips below,
which I have augmented based on my own experience adding a ToC to the Style
Guide (woo hoo!).
By adding a linked table of contents, you can help readers navigate your
document. This is especially useful for non-fiction. Most fiction doesn’t
need it. If you follow the instructions below, the ToC should work in your
EPUB, MOBI and PDF files, but it will not work in our other formats.
First, create your table of contents where you want it by typing it out. Make
sure the text is normalized just like the rest of your Smashwords’ Word
document. Example:
Contents
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Etc.
Next, we are going to create the BookMarks. In Word 2000, 2003 and 2007, the
Booksmark function is under the Insert tab. Go through your document, and at
each Chapter Start or Indexed item, you will highlight it and then select
Insert: bookmark. Name your bookmark corresponding to the Chapter/Indexed
item and then click add. It’s very important to use the first word of your
heading you’re linking to, because later on, when you add the hyperlinks,
Word displays the bookmark shortcuts in alphabetical order. With many
bookmarks, I found many of my bookmarks weren’t labeled properly, so it was
tough to link to the correct bookmark. If you want to link to a chapter named
How to Publish Ebooks, I’d recommend naming your bookmark
“HowToPublishEbooks” to make it easy to locate. If you instead name it,
“publishebooks,” you’ll frazzle your brain and make mistakes.
Repeat the process above for every Chapter Start as well as for other matter
in the book like index, bibliography, epilogue, prologue, etc. I didn’t link
to every section in the Style Guide, because otherwise the ToC would have
been three pages long. This is your call.
Next, return to your table of contents and highlight the word “Contents.”
Click insert, bookmark, and label this last bookmark “Contents”. Formatting
note: Bookmarks cannot have spaces or odd characters. If instead of
“Contents” you called the label in the document Table of Contents, as I did,
then when you insert the bookmark, name the bookmark “TableofContents,” one
word, or “toc.”
Next, add the hyperlinks to your Chapter Starts. In your table of contents,
if Chapter 1 is called Chapter 1, then highlight Chapter 1 and then click
insert Hyperlink. As you can see in the Style Guide, I tried to use more
descriptive labels. In Word’s Hyperlink menu on the left hand side, select
“Place in this document.” You will now see your bookmarks listed in the main
window. Select Chapter1 bookmark (or whatever you labeled it) and then click
ok. Do this procedure for every chapter and piece of matter in the table of
contents.
Final step. Now you can link back to the Table of contents. Move through your
document to each indexed item or Chapter start and highlight it. Then click
insert, hyperlink, and then select “Place in this document.” When the
bookmarks are showing in the main window, select the bookmark labeled
“Contents,” assuming that’s what you named your Table of Contents. Do this
for each and every chapter and or indexed item.
After you are done, all your links will be underlined. You will need to test
and make sure you linked everything properly. In most Word versions, you just
click on the hyperlink to test. In Word 2007, you may need to Ctrl-Click each
hyperlink and make sure it takes you where you need to go in the document.
Advice: Word has an automatic ToC generation feature under the reference tab.
Do not use this. It uses automated headings and formatting to generate the
ToC and this will un-normalize your text and cause font conversion issues in
your Smashwords files.
END OF PASTE FROM SMASHWORDS STYLE GUIDE.
I did all that as described but I still get the message "Word cannot open the specified file".
Could you help please?

This question would be better addressed to...
http://www.microsoft.com/mac/help.mspx
I think the operative phrase from that article is...
*Consider this feature in “beta.”*
-mj

Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AM

a step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

[SOLVED] "cannot open shared object file" but library is installed

I'm trying to run a digital logic simulation tool called "atanua" but I'm getting a missing library error:
$ atanua
/opt/atanua101120/atanua: error while loading shared libraries: libSDL_image-1.2.so.0: cannot open shared object file: No such file or directory
I tried re-installing both atanua (from AUR) and sdl_image (from repos) but the error remains.
$ ldd /opt/atanua101120/atanua | grep sdl_image
libSDL_image-1.2.so.0 => not found
I can find the "missing" library though:
$ locate libsdl_image
/usr/lib/libSDL_image-1.2.so.0
/usr/lib/libSDL_image-1.2.so.0.8.2
/usr/lib/libSDL_image.a
/usr/lib/libSDL_image.so
And so can the loader:
$ ldconfig -v | grep sdl_image
libSDL_image-1.2.so.0 -> libSDL_image.so
My initial thought is that the problem is a name mismatch between the program and the system, but I don't know the proper way to fix this. Does anyone know what I should try next?
Here's my system specs:
$ uname -a
Linux 3.0-ARCH #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ AuthenticAMD GNU/Linux
Thanks for your help.
Last edited by spence (2011-10-30 20:22:07)

You're right. Some how [multilib] got disabled in my pacman.conf so I didn't spot a 32-bit version of the library. I uncommented the [multilib] lines, searched again, and found it. Problem solved. Thank you.

Gardei@gardei-lab:~$ ./firefox/firefox XPCOMGlueLoad error for file /home/gardei/firefox/libxpcom.so: libxul.so: cannot open shared object file: No such file or

Friends:
The latest Firefox won't launch. Here's what I get...
gardei@gardei-lab:~$ ./firefox/firefox
XPCOMGlueLoad error for file /home/gardei/firefox/libxpcom.so:
libxul.so: cannot open shared object file: No such file or directory
Couldn't load XPCOM.
Both .so files exist in ./firefox
Thanks. -- BG

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

Cannot open a JSf file in jdev with WYSWYG

HI,
I startup Jdeveloper 11g studio edition version 11.1.2.3.0 with all features option selected. but I cannot open a *.Jspx file in jdev with WYSWYG showing.
anyone can give help?

Hi,experts,
In jdev 11.1.2.3,
I come up with this problem again:
In order to improve performance for jdev, i open the Manage Features for Studio Developer(ALL Features) Role, and deselect some features:
-Database Modeling
-EJB Modeling
-Team Productivity Center
-Version Control
-Web Services
-ADF Mobile Browser
Then after restart jdev,
Jsf pages cannot see in WYSIWYG mode in Designer viewer.
only see a component-structured tree but in text style in jdev in designer view
Even I reinstall jdev, the problem remains.
Can anyone give any help?
Thanks.
Edited by: BAO.SZ on 2013-5-11 上午9:40

[SOLVED!] WINE: libSM.so.6: cannot open shared object file= fail

Greetings,
So today I decided I'd play an old windows game with my son. It's been a while since I've played wine game with him... since my last reinstallthat I did just for the S&G to play with the new install method.
Anyways, I go through the motions, installing wine and all that. Then I go and click on the game to run. Nothing.
So, I go and try to run it through command line. I get this fun stuff:
wine H5_Game.exe
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
err:module:load_builtin_dll failed to load .so lib for builtin L"winex11.drv": libSM.so.6: cannot open shared object file: No such file or directory
err:module:load_builtin_dll failed to load .so lib for builtin L"winex11.drv": libSM.so.6: cannot open shared object file: No such file or directory
Application tried to create a window, but no driver could be loaded.
Unknown error (127).
I search the mighty internets and try many different things. But I cannot seem to find the file that gives "libSM.so.6" or whatever is needed to make this work. So defeated, I come to you to ask that you please give me a leg up here.
Thanks, in advance, for any and all help!
Last edited by mythus (2012-10-14 18:16:48)

Honestly, I did not know about pkgfile.
So, I installed it and determined that while I have libsm, I was missing lib32_libsm. So installing that fixed my issue with WINE.
Thanks for the leg up Trilby! Most appreciated!

Libclnysh.so.1.0 : cannot open shared object file..

Hi,
I was running Oracle for linux successfuly for about 2 weeks
now.. until from yesterday, I am starting to recieve the
following error when i run svrmgrl
libclnysh.so.1.0 : cannot open shared object file : No such file
or directory
But, however svrmgrlO works..
I tried to do a 'genclntsh ' but it gave me the following error..
ld: cannot open -lnsl: No such file or directory
I am using
-SuSE 5.2
-Kernel 2.0.36 ..
-patch for glibc installed
Memory 64 MB
I just cant understand why it started giving this problem after
all this time it worked fine.. what could have gone wrong?
HELP !!
Shibu Basheer
null

Shibu Basheer (guest) wrote:
: ld: cannot open -lnsl: No such file or directory
: I am using
: -SuSE 5.2
: -Kernel 2.0.36 ..
: -patch for glibc installed
: Memory 64 MB
See LD_LIBRARY_PATH
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib
export LD_LIBRARY_PATH
: I just cant understand why it started giving this problem after
: all this time it worked fine.. what could have gone wrong?
: HELP !!
: Shibu Basheer
null

Cannot open CS3 Help Files

Similar Messages

Maybe you are looking for