Cannot open documents in "PAGES" app since updating software. can anyone help???????
cannot open documents in "PAGES" app since upgrading from original ipad 3 software to 7.1.2. can anyone offer suggestions please?
Generally, you are more likely to get an answer if you post in the iWork for iOS forum at
https://discussions.apple.com/community/app_store/iwork_for_ios
Cheers, Tom
Similar Messages
-
I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed it but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?
Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
1. Make sure that the right volume is selected in the Startup Disk preference pane.
2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
3. Reset the System Management Controller.
4. Reset the PRAM.
5. Start up in safe mode, then restart as usual. If you can't start in safe mode—for instance, if FileVault is active—then triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with an item named "folders" selected. Move the selected item to the Trash. You'll be prompted for your administrator password. Restart and empty the Trash. -
updating ios7 my iphone 4s has gone into restore mode and asking me to plug into itunes, im then getting an 3004 error. i have not been able to use my phone since doing this. can anyone help ?
http://lmgtfy.com/?q=iPhone+error+code+3004
-
Cannot get incoming mail on my ipad since upgrading. Can anyone help?
I cannot get incoming mail on my ipad since upgrading
. Can anyone help?Thank you so much. This solved my problem in seconds after hours of trying other ways to get it Sorted. Many, many thanks.
-
I upgraded to Lion and now Safari hangs up and the updater hangs up so I can't install the update. Can anyone help?
Reinstalling Lion
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
HT4623 trying to 4.2.1 to 4.2.3 but I dont see software update. Can anyone help?
trying to 4.2.1 to 4.2.3 but when I go to settings, general, I dont see software update. Can anyone help?
There is no 4.2.3 and over-the-air updating was introduced with iOS 5.0.
You will need to connect your iPhone to the computer you sync with. When iTunes opens click on the name of your iPhone under DEVICES on the far left frame. Move to the Summary tab to the right and click on the Update button. -
I have had to restore my ipad to factory settings, having made a backup on my pc first. When Ihave tried to restore from my pc I have no apps!! Please can anyone help me get them back with all their data. I don't have wifi at home and I have never been able to sync my pc with my ipad, although it works with my iphone! I copied all of the apps before I restored using itunes, but no idea where they are copied to. Any help would be hugely appreciated to get my daughters games back. Thank you in advance )
Hi Skydiver119
Thank you so much for taking the time to reply to my problem.
Yes the purchases were made though my apple id.
I have looked at a few other questions on this topic and I have read that the app data is stored in the backup file but the apps themselves need to be synced back onto the ipad. Someome has mentioned right clicking on sync my ipad but I don't know where to find that to right click on!! Lol.
Again, I really appreciate your time and if by any chance you know where I can 'right click' I would really appreciate you letting me know as I can't get my ipad to sync with my pc at all, although it is being picked up in itunes and it has backed up to itunes okay. GGrrr. Maybe I have something wrong in the settings which is not making them compatible? -
The MRP_ATP_PUB.Call_ATP api not retrieving requested_date_quantity value when executed in custom schema but when executed in apps its working fine, can anyone help on this..
We are passing the required values to the ATP API.
1) The x_return_status is showing as 'S' i.e. success but x_atp_rec.Requested_Date_Quantity is not returning any value.
2) If there is a grant issue how to identify it.
Regards,
Vinod AnnukaranPl do not post duplicates -0 MRP_ATP_PUB.Call_ATP api not retrieving requested_date_quantity value when executed in custom schema but when executed in apps its working fine, can anyone help on this..
-
I am trying to "authorize" my new computer so that I can download my previous purchases from the cloud. It says to open iTunes and go to the STORE menu and select AUTHORIZE MY COMPUTER, but when I open iTunes there is no STORE menu. Can anyone help?
If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(85933) -
hi can anyone help me with the above query before I throw my imac through the window and it would help me a lot if answers were in plain english and not full of techno language as im at a fairly basic stage with computers :-) thank you
macjack wrote:
Here are some suggestions if you need to run Power PC apps
http://www.chriswrites.com/2012/07/how-to-run-powerpc-apps-on-mac-os-x-lion/
That article is a bit dated. Here is a recent post I assembled for a similar question, with more updated information:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions if they are available, or find alternative software that will open your data files, modify them and save them;
4. Install Snow Leopard Server (with Rosetta) into Parallels or VMWare Fusion. Apple is now selling Snow Leopard Server for only $19.99 + sales tax & shipping; call 1.800.MYAPPLE (1.800.692.7753). This solution will give you concurrent use of your PowerPC applications and access to Lion or Mt. Lion.
[click on image to enlarge]
NOTE: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization
More information here:
http://forums.macrumors.com/showthread.php?t=1365439 -
I use 'numbers" to create an invoice which I previously exported(prior to recent updating) to Exel to enable me to send it to my employer. When I try to do this now I get an file extn XLSX and the number content I placed on the invoice is different ( as if the file is corrupted)...can anyone help please ?
I use 'numbers" to create an invoice which I previously exported(prior to recent updating) to Exel to enable me to send it to my employer. When I try to do this now I get an file extn XLSX and the number content I placed on the invoice is different ( as if the file is corrupted)...can anyone help please ?
-
after updating my iphone 4 i now cannot open picture texts from a samsung galaxy 2s. all i get is the text with a box with the picture file size and a question mark to the left of the box. It has also done the same to the already opened pictures I had received prior to updating my iphone. can anyone help with this ??
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
The above comes from here:
http://support.apple.com/kb/TS3694#47 -
Ever since the latest update, when I click on the firefox icon in my taskbar, I don't get a new browsing window when I used to be able to do so.
I've checked the tabs menu in the options, and I don't see a way of enabling this feature.
Can anyone help?-> Update Firefox to the latest version 10
* [[Installing Firefox on Windows]]
Perform the suggestions mentioned in the following articles:
* [[Troubleshooting extensions and themes]]
Check and tell if its working.
May not be related to your problem but some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)''' -
Have WIFI connection but can't access Safari or App store, nothing. Can anyone help??
I have just bought a iPad 2 WI-FI 16G today. I have a full WI-FI connection but can't access the App store or Safari for any webpages, can anyone help?
Thanks!!!!Despite what you call, "a full WiFi connection", you may not really be connected to your WiFi network.
Your router may not have given your iPad a valid local network IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power to the router for 30 seconds and then restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
Snapchat and camera apps won't work can anyone help
Can anyone help it hasn't worked for 3 days and it's annoying me
Hello Tom,
I recommend trying these steps if you are experiencing issues with applications that use the Camera on your iPhone:
Camera is not functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If you continue to experience issues with just specific applications purchased from the App Store, I recommend reviewing this article:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thank you for using Apple Support Communities.
Best,
Sheila M.
Maybe you are looking for
-
Equivalent to ROLAP :insert, update, delete in OLAP DML?
I have a ROLAP star schema. The process update is in Real Time using triggers in the operational tables. When an update in the operational table occur the trigger call a store procedure where : 1- find de fact row using dimensions key, 2-the messure
-
I have a for-loop problem: I want to write a two for-loops to produce this below output 100 200 205 300 305 310 400 405 410 415 500 505 510 515 520 600 605 610 615 620 625 700 705 710 715 720 725 730 800 805 810 815 820 825
-
Eigen values are comeing but not in order
import Jama.Matrix; import Jama.EigenvalueDecomposition; public class Eigenvalues1 { public static void main(String[] args) double[][] vals = {{64.45,0,0,0},{0,64.45,0,0},{0,0,64.45,0},{0,0,0,37.08}}; double[][] vals1 = {{71284.72,-35642.36
-
Pie Chart Available Attributes
Hi All, I am trying to create a Pie Chart. Query looks something like this - select count(column_a), column_a from table_a group by target_type When I drop this Business Component on to the jsff page --> Select Graph --> Pie Chart --> Create Pie grap
-
IE table rendering issues. Any ideas how to eliminate extra cell spacing rendered by IE
I have a problem with IE 9 rendering a table. This particular page has a larger table rendered for an application. 1. I have disabled all CSS on the site (its strictly in the table render on the site) 2. Removed as much spacing as possible in