Cannot open existing Project File - General Error

I recently copied some FCP 4.5 projects from one drive to another (drag and drop) due to drive space issues. I did NOT use media manager to do this. I did not delete any files before I went back to try and open the project in the original location. Instead of the project loading, I got the "General Error" message. I could not open the newly copied version either. I deleted all rendered files I could find, no luck. My scratch discs are not located in one area (since some have been moved too), and I wonder if the links have gotten scattered. Does this have anything to do with this problem? If one moves an existing project's scratch disk files to another location, will it cause this problem? Any help will be appreciated. My deadline approaches quickly.

Moving project files shouldn't mess things up, unless you've updated FCP version.
I see you're on Tiger...have you been able to work FCP 4.5 projects on that OS/QT, in the past?
Moving the scratch files will drop the link, but you should be able to 'reconnect media' to get them back, provided you can get your project files to open.
Have you tried opening an autosave version of the project files in question?
K

Similar Messages

HELP! Can't Open a FCP project File, "General Error 41"

Trying to open a project for a Good guy
over a barrel, using FCStudio /FCP 5.1 FCP opens,
then says "General Error 41". All I need to
do is create an SD Version DVD, But first
I Gotta open it.
G5 Mac OS X (10.4.9)

Since this is your friend's FCP project file, check to see if he/she has version 5.1.1 or above.
I think the project file is from a newer format.
For some reason, the bump from FCP 5.1 to 5.1.x was big enough to require the project files to be a different format.
If that is the case, (and if you want to take the chance on the unknown,) you can upgrade to the version your friend has (or above.)
Make sure you really want to upgrade and are prepared for all the potential problems!
Dual G5 Mac OS X (10.4.9)

Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AM

a step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

The operation can't be completed because an unexped error occurred (error code-50). This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive. Then this morning I can't open my project file. What to do?

Message: The operation can't be completed because an unexped error occurred (error code-50).
This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive.
Then this morning I can't open my project file. I get this message: The project appears to be damaged, it cannot be opened.
What should I do!??
I have moved my project onto 2 different external hard-drives now.

Hi There,
After looking around for this error, it seems to be related to OS, we would recommend you to contact Apple support for this.
Thanks,
Atul Saini

Gardei@gardei-lab:~$ ./firefox/firefox XPCOMGlueLoad error for file /home/gardei/firefox/libxpcom.so: libxul.so: cannot open shared object file: No such file or

Friends:
The latest Firefox won't launch. Here's what I get...
gardei@gardei-lab:~$ ./firefox/firefox
XPCOMGlueLoad error for file /home/gardei/firefox/libxpcom.so:
libxul.so: cannot open shared object file: No such file or directory
Couldn't load XPCOM.
Both .so files exist in ./firefox
Thanks. -- BG

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

HT3775 I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. I get this error message: The document "ANDREW_McD_MEDIA_VERSION.avi" could not be opened. A required codec isn't available.

I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. These same files opened up with no problem prior to my upgrade. Additionally, I had upgraded to the Pro version of Quicktime recently, but it appears I've retrograded back to the basic version, unexplainably.
I get this error message: The document “ANDREW_McD_MEDIA_VERSION.avi” could not be opened. A required codec isn't available.

Hi,
I had exactly the same problem & found the answer here https://discussions.apple.com/thread/3219982?start=0&tstart=0 . Download a program called Perian, very easy to download worked a treat. I wish all fixes were this easy - Debbie

[Solved]xelatex error - libicuuc.so.53: cannot open shared object file

Today when I tried to compile a xelatex doc I got the following error:
xelatex: error while loading shared libraries: libicuuc.so.53: cannot open shared object file: No such file or directory
do I need to revert to an older version of some package?
OK, updating yet again seems to have solved the problem.
Last edited by emacsomancer (2014-10-21 17:52:54)

Your guess led me to the conclusion!
AUR packages were not the problem, but what I did was I force-removed gtk2 and gtk3 packages and then installed them again. Everything works now, thanks.
Here's exactly what I did
pacman -Rdd harfbuzz-git pango gtk2 gtk3 librsvg pangomm libtiger
pacman -S gtk2 gtk3
Last edited by Mr. X (2012-11-01 09:55:04)

Cannot open Catalyst (FXP) files when the project reaches a certain size!

Hi,
I am a UI designer working for Playstation and have recently downloaded the trial of Flash Catalyst in order to test the validity of using it for game UI prototyping. This has worked well for me up until a week ago when I attempted to open the project file I had been working on and it simply does not open - no error message or anything, it just sits on the progress screen and never manages to open the file! I have left this for many hours in the hope that it might open and have tried multiple times to no avail. Has anyone else encountered this problem? If so can anyone help me salvage the file? I'm gutted as this amounts to a weeks worth of work so if anyone can help I'd be extremely grateful!
Cheers,
Mark

Hi Chris,
Unfortunately I didnt make any backups
I have tried to open the file in Flash builder but it automatically loads flash catalyst as normal then fails to open. Is there a way of loading it in builder without loading catalyst? I'm not really familiar with builder so have just downloaded the trial. Tried importing the fxp file but cant find an option to do that.

Adobe Premiere CC crashes when opening a project file .... error 3697 . [was:Adobe Premiere CC]

Adobe Premiere CC crashes when opening a project file .... error 3697 .... have to close application with Task Manager.... media files open separately OK

Just that one project, or any project? Can you create new projects?

Fatal error C1083: Cannot open type library file: '..\..\bin\TsAdpApi.tlb': No such file or directory

Hi Folks:
I am doing one Dll file for TestStand , and got an error : d:\teststand3.5\teststand 3.5\examples\modaldialogs\mfc\tsapivc.h(18) : fatal error C1083: Cannot open type library file: '..\..\bin\TsAdpApi.tlb': No such file or directory
Could anyone help me out of that ??
Thanks in advance !

This type library for the adapter API is embedded in the teapi.dll. If you are using Visual Studio.NET, there is an attribute called tlbid that you can use with the #import directive in order to import that embedded library (see the MSDN documentation for more details). For example:
#import tlbid(2)
In VC++ 6.0, there is no way to import embedded type libraries. Therefore, you must use the attached type library file (.tlb) with the #import directive. For example:
#import "TsAdpApi.tlb"

Error message "cannot open address book file" thunderbird freezes

If I try to write an e-mail i get an error message "cannot open address book file". Then the program freezes, and I can not close the page, and none of the features of thunderbird works.

Do you have the .swf file available still ?

If my Adobe Muse and Air apps are both up to date as of today and I cannot open a Muse file, what are my options? I get an error message regarding the Progress Window showing and then Muse crashes.

If my Adobe Muse and Air apps are both up to date (as of today) and I cannot open a Muse file, what are my options? While Muse is relinking assets I get an error message regarding the Progress Window "showing" and then Muse crashes.

Hi there,
Do you get this error while opening a particular file or all files?
Please try opening a different .muse file, and check if it does the same?
Ar you opening a .muse which is saved on a network drive?
Thanks.

(OS 10.6.8 Imac)I cannot open an adobe file on wels fargo online getting Session-1.cgi could not be open unknowe error etc.. on othe browsers it works (safari,Chorme)

Question
(OS 10.6.8 Imac)I cannot open an adobe file on wels fargo online getting Session-1.cgi could not be open unknown error etc.. on othe browsers it works (safari,Chrome)

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Rapidwiz error cannot open shared object file: libpthread.so.0 libc.so.6

Hi,
We are following Note 238276.1 Migrating to Linux with Oracle Applications Release 11i, trying to install the technology stack (Section 2: Step 4), in a RHEL5 64Bits.
We have downloaded the startCD (B29029-01) and the TechStack CDs (B29032-01_2of2). When running the ./rapidwiz from startCD, we get following error:
/tmp/RapidInstall/jre/Linux/1.4.2/bin/jre: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
chmod: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
rm: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
More info:
[applmgr@desaebs rapidwiz]$ ldd '/tmp/RapidInstall/jre/Linux/1.4.2/bin/jre'
linux-gate.so.1 => (0xffffe000)
libpthread.so.0 => /lib/libpthread.so.0 (0x00bed000)
libdl.so.2 => /lib/libdl.so.2 (0x00be7000)
libc.so.6 => /lib/libc.so.6 (0x00a9f000)
/lib/ld-linux.so.2 (0x00a81000)
[applmgr@desaebs rapidwiz]$ rpm -qf /lib/libpthread.so.0
glibc-2.5-42
[applmgr@desaebs rapidwiz]$ rpm -qf /lib/libc.so.6
glibc-2.5-42
[applmgr@desaebs rapidwiz]$ rpm -qf /lib/libdl.so.2
glibc-2.5-42
[applmgr@desaebs rapidwiz]$ rpm -qf /lib/ld-linux.so.2
glibc-2.5-42
[applmgr@desaebs rapidwiz]$ locate linux-gate.so.1
It seems that linux-gate.so.1 is not present, I'll try to install it, but I'm not sure this can be the real problem.
Any idea?
Thanks!
Alvaro

Yes, thats correct ...
The actual situation is:
-Customer has split configuration: DB 11g in RHEL5x86-64Bits + APPS 11.5.10.2 in Windows2003
-The target is to have all DB11g and APPS R12 in single node RHEL5x86-64Bits
We're following Note "Migrating to Linux with Oracle Applications Release 11i [ID 238276.1]" to migrate the APPS server from Windows to Linux, as a middle/temporary step prior to make the Migration to R12.
We are trying to do it, but we get errors during Section 2.4 "Install the Middle Tier Technology Stack", running the rapidwiz command we get errors, because of R11i is not supported in 64bits platforms (Oracle Applications Installation Update Notes, Release 11i (11.5.10.2) [ID 316806.1])
Our bigest doubt now is that we are trying to install 11i techstack into RHEL5 x86-64bits, and we think this is not possible, because of R11i is not supported in 64bits platforms !!!
That is, could we migrate the APPS server from Windows to Linux x86-64 as a temporary step to begin the upgrate to R12 all in RHEL5x86-84bits, that is full supported on this 64bit platform?
What possibilities do we have if we can't do this?
Theese can be some of them:
1-Migrate apps server from actual windows2003 to Linux 32bit, in other host with 32 bits installed, instead of 64bits, and move here from windows to lilnux 32bits, and the begin the R12migration
2-Migrate to R12 into actual appserver Windows2003 and then migrate appserver from windows to rhel5-64bits
I don't like second option, because we want to make the R12 upgrade into Linux, not in windows. We need to eliminate windows platform as soon as we can.
Thanks in advance ,

The installation was canceled: Install Windows: Windows cannot open the required file E:\sources\install.wim Error code: 0x80070570

I have a Windows XP computer and accidentally formatted the C:\ Drive. I then decided to buy the Windows Vista CD installation and popped it into the CD Drive, there was a problem with the Drive so I had to move it onto a USB Drive instead(on another computer).
When I booted my PC(C: Drive formatted) all went well until I typed in the product key and clicked next. It shows a dialog box:
Install Windows
Windows cannot open the required file E:\Sources\Install.wim. The file may be
corrupt or missing. Make sure all files required for installation are available, and
restart the installation. Error code: 0x80070570
I am in urgent need of help immediately. Please help me!
P.S. and thanks for advance for any help. Sorry for anyone with the same problem.
PC info: HP dc5750 Small Form Factor

It sounds like there's a problem with that file. You will need to re-copy the files to USB or even re-download the operating system from Microsoft.

Cannot open existing Project File - General Error

Similar Messages

Maybe you are looking for