"Cannot open File Extension. Unknown file extension. Error code: 40003-5"

Good Afternoon Everyone,
I am getting an error message when the user is trying to access the link on their activity.
"Cannot open File Extension. Unknown file extension. Error code: 40003-5"
Can someone help?

Please go to administration ->system initilization->general settings> path tab and define all the paths.
i.e you must specify the path of each & every folder from where you are going to open the file.
Hope your problem would be solved
Regards,
ShriX.

Similar Messages

TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
Please!
Thanks!

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Kernel Upgrade Error :Cannot open or remove a file containing a running prg

Hello All,
I have installed ECC 6.0 on DB2 /AIX and now trying to apply Kernel Patch 75 but after Uncar of SAR files and moving the same to EXE (/sapmnt/PRD/exe) I am nota ble to copy few files, Follwoing error is coming.
As a reuslt of this error Dispatcher is not starting in PRD.
cp -p /sapinstdir/kernelpatch/indep/dw_gui.o /sapmnt/PRD/exe
cp: /sapmnt/PRD/exe/dw_gui.o: Cannot open or remove a file containing a running program.
cp -p /sapinstdir/kernelpatch/indep/libregex.o /sapmnt/PRD/exe
cp: /sapmnt/PRD/exe/libregex.o: Cannot open or remove a file containing a running program.
cp -p /sapinstdir/kernelpatch/db/dbdb6slib.o /sapmnt/PRD/exe
cp: /sapmnt/PRD/exe/dbdb6slib.o: Cannot open or remove a file containing a running program.
cp -p /sapinstdir/kernelpatch/indep/dw_stl.o /sapmnt/PRD/exe
cp: /sapmnt/PRD/exe/dw_stl.o: Cannot open or remove a file containing a running program.
cp -p /sapinstdir/kernelpatch/indep/dw_xml.o /sapmnt/PRD/exe
cp: /sapmnt/PRD/exe/dw_xml.o: Cannot open or remove a file containing a running program.
cp -p /sapinstdir/kernelpatch/indep/dw_xtc.o /sapmnt/PRD/exe
cp: /sapmnt/PRD/exe/dw_xtc.o: Cannot open or remove a file containing a running program.
Plesae help me to resolve this issue.
Regards & Thanks,
Ankita.

Hi All,
When a shared library with read-other permission is loaded, it remains loaded (and available) even if no processes are currently using it. This allows faster execution, but may result in a message like "Cannot open or remove a file containing a running program" on installs or rebuilds of application libraries.
Refer to the man page for subroutine dlopen and command slibclean.
Regards,
Mukul SHarma

Error Happened at RFC Server Cannot Open the Job Batch File.

We have BW 7.0 and Data services 12.1. We are scheduling a Infopackage in BW that triggers a job in Dataservices server.
We had checked the connection between Dataservices source system in BW and RFC server on Dataservices side and these connections are good. on the 3rd party sellections tab in infopackage we specify the batch file name that we exported in Dataservices server. When we execute the infopackage we get the following error.
Error Happened at RFC Server Cannot Open the Job Batch File.
This error started occuring from yesterday and prior to that it was working fine. We are not understanding what changed in the system to cause this error.
Can anyone suggest any solutions for the above issue.
Thanks,
Naveen.

I'm not sure what the root cause would be here. Is the file still available ? Did file permissions change ? ...
But I wanted to point your attention to the fact that in Data Services/Data Integrator XI 3.2 (=12.2) we significantly enhanced the integration with BW. In XI 3.2, the RFC server is now integrated into the Data Services Management Console (so no need to start as a seperate executable) and you can start jobs from BW by just specifting the job's name in the repo (no need anymore to export execution commands to .bat files). So if upgrading to XI 3.2 is an option, things should go much smoother.
More details on the wiki : http://wiki.sdn.sap.com/wiki/display/BOBJ/Loading+BW
Thanks,
Ben.

Illustrator CC 2014 Cannot open .eps, and .ai files.

Hello!
I recently began using the Creative Cloud and am trying to open a file made in a previous version of illustrator. I'm getting an error "The file '123.ai' is in an unknown format and cannot be opened.'" It says the same thing about .eps files.
There are, however, lots of .ai & .eps files that I made myself in CS6 that appear to be opening just fine. I appear to just be having problems opening files made with Adobe Illustrator CS 11.0.1 (maybe others, but this is the only one in question). The guy that made it probably hasn't had an update in a LONG time, but I still need to edit the files.
Do you have any ideas for me?

Hmm, when trying to open as a copy - it still doesn't work, but I get more info in the error message. Translated is says: "cannot open "xxx.indd". The file "xxx.indd" is broken (error code: 4)".
It seems I get this error message on all the "indesign 5.0" -files.
*trying to figure out what this error code means*

I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

Is this what you downloaded: iTunes 10.7?
When the update fails what if any error report do you get, specifically? Please do this before trying again:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Cannot open a downloaded pdf file..."The file couldn't be opened because it isn't in the correct format."

I have had this problem several times lately: I cannot open a downloaded pdf file. The error message reads: "The file couldn't be opened because it isn't in the correct format." But, of course, it is a pdf file.

My MacBook Pro (2.5 Ghz Intel Core i5) is running OS X 10.9.4. Here is what happens when reading an online user manual that I want to save to the Desktop and read later as a PDF file on my iPad or phone. With Safari I will select "Export As PDF" and the file shows up on the desktop. Even after multiple trials, there will be a dialogue box indicating the file cannot be opened. If I check the file info, the size is "zero." Trying to save the file as a pdf using the Print menu yields the same results. I have tried both of these methods using Preview, Adobe Reader, and PDF Pen Pro. This strange behavior also occurred several weeks ago and I finally abandoned the effort. But when the same thing happens twice, it becomes an issue that needs to be resolved.

ORA-00210: cannot open the specified control file

Hi all,
Initially we faced the following error:
ORA-00214: control file '+DBDG/dws/controlfile/current.256.638648487' version
75647 inconsistent with file '+FLASHDG/dws/controlfile/current.256.638648489'
version 75645
Then the following action:
RMAN> restore controlfile from autobackup;
Starting restore at 05-DEC-07
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=997 devtype=DISK
recovery area destination: +flashdg
database name (or database unique name) used for search: DWS
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: +flashdg/DWS/AUTOBACKUP/2007_12_04/s_640476511.697.640476513
channel ORA_DISK_1: control file restore from autobackup complete
output filename=+DBDG/dws/controlfile/current.256.638648487
output filename=+FLASHDG/dws/controlfile/current.256.638648489
Finished restore at 05-DEC-07
RMAN> recover database;
Starting recover at 05-DEC-07
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 12/05/2007 15:16:10
ORA-00210: cannot open the specified control file
RMAN>
Any idea why this is happening?
Regards,
Soma Sekhar Karri

Something which you should have looked up prior to posting
00210, 00000, "cannot open the specified controlfile"
// *Cause: Cannot open the controlfile.
// *Action: Check to make sure the controlfile exists and is not locked by
// some other program.
Sybrand Bakker
Senior Oracle DBA

Please HELP! i cannot open any Adobe PDF files anymore. i DL the new version XI and since no files h

Please HELP! i cannot open any Adobe PDF files anymore. i DL the new version XI and since no files have opened - so i recently uninstalled it and re-installed adobe reader 9 but i am having the same problem - no pdf files open and its really causing a problem as i can not open any work documents. please help

Three things to try (Reader XI)...
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

The system cannot open the device or file specified

I am trying to install jsdk.142 but i get an error message that says "The system cannot open the device or file specified" Any suggestions on how to get past this?

I figured it out myself. The temp folder that the program was using was encrypted. I removed the encryption and it installed fine.

Fireworks CS4: could not open the file. Unknown file type

Hello, this is the second file created with Fireworks CS4 that can't be opened. I'm using the same Fireworks installation that created the file. The file is a 1.2 MB file containing the pages of a draft for a new website.
When I click on the file in Windows Explorer to open it, Fireworks tries to open it, but it can't. Instead, an alert pops up with this message: "Adobe Fireworks CS4 Could not open the file. Unknown file type"
Working with Windows Vista Business, Adobe Web Premium CS4 suite
I already tried opening the file, to no avail, with:
-another computer with Windows XP Pro SP3 and the same Fireworks version
-another computer with Windows XP Pro SP3 and Fireworks CS3
-another computer with Windows XP Pro SP3 and Fireworks MX 2004
Please help.

I tried to find a solution for you by using:
http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=error%20opening%20file&cat=su pport&product=fireworks
but I couldn't find anything. You may want to give it a go :-)
Can you open the file in another program, maybe an earlier version of FWs, or Photoshop or even Illustrator if you have it?
Not sure if there's a configuration folder that needs to be renamed and when FWs restarts it re-writes the config file... that's something to has to be done with DW when 'funny stuff' happens.
That's the best advice I have, I'm sorry :-(
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

Cannot open ... because file's resource map is incorrect.

I need the ability to open QT files and FCP movies in QT 6.0.1 while booted to OS 9.2.2. However, even though the files open fine in OSX QT7 and FCP 5 (as well as FCP3) applications, I very often get an error message when trying to open them in OS9 with QT6:
Cannot open "<flename>" because a file's resource map was incorrect.
Is there a utility to fix this?
Thansk,
Cris

Possible $50 solution:
http://www.lacie.com/products/product.htm?pid=10498
LaCie FastCoder
Pocket-sized DV to MPEG transcoder
LaCie FastCoder
User Benefits:
* Pocket-sized DV to MPEG-1 and MPEG-2 hardware encoder
* Compact, silent and FireWire bus-powered
* Full support for QuickTime compatible files
* High-quality, real-time encoding on G3, G4 and G5 Macs with built-in FireWire ports
A unique real-time encoder, this compact, silent device allows you to quickly convert DV NTSC to MPEG-1 and/or MPEG-2 files using a FireWire bus. The LaCie FastCoder is compatible with Mac OS 9.2 and OS X 10.2.6 or greater. It comes bundled with the Capty FastCoder Utility for hardware encoding, Capty DVD/VCD 2.x (Full Version) for DVD and Video CD authoring, and SilverKeeper software for backing up your projects. This easy to use, portable encoder supports QuickTime full quality DV-compatible files exported from Apple’s Final Cut Pro, Final Cut Express, iMovie, or Adobe Premiere Pro.
specs...
MPEG-2
2 to 10Mbits/s (CBR/VBR)
2 to 6Mbits/s (VBR Elementary Stream)
(from B&H web site)
For $50, might as well give it a try!
--Cris

Could not open file. Unknown file type.

The file would not open in Fireworks due to incorrect image paths. The image paths are corrected in dreamweaver and saved. The file now returns "Could not open file. Unknown file type."
So, then I made the same corrections with a text editor and saved the file. Same error when fireworks tries to open it.
in way over my head!

I've had that happen too. What worked for me was shutting FW down and rebooting my machine.

Cannot open .xls or .doc files

I have office 2008 updated to the latest version operating on a mac osx 10.5.8. I cannot open xls or doc files. I get the messages "file cannot be opened" and "file blocked".
Have tried
- opening via right click and through the programs themselves
- installing updates
Any suggestions welcome.

Hello,
This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office. Please post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums
Good luck...

Mac OS 10.9.4 cannot open the NEF/RAW files from the new Nikon D810 Camera

I have a new Nikon D810 camera. My new iMac cannot open the NEF/RAW files from it...Anyone have any knowledge of this?

If you will take the time to send Apple feedback, they will add RAW support - when I got my Canon, it wasn't supported either. I filed feedback and, two months, later, there was an update which included my camera model.
http://www.apple.com/feedback/macosx.html

"Cannot open File Extension. Unknown file extension. Error code: 40003-5"

Similar Messages

Maybe you are looking for