Cannot Open File In Reader 9 After Using CutePDF Writer
After using CutePDF Writer to output a file from the print screen of Adobe Reader 9.0, I am unable to open it. I get the error "Adobe Reader could not open 'filename.pdf' because it is either not a supported file type or because the file has been damaged."
The file shows a Reader icon, but when I view it under Properties, it shows the file size as 0 kb. Something went wrong on export...
The file was created using Acrobat Pro 9.0.
metaphiz wrote:
After using CutePDF Writer to output a file from the print screen of Adobe Reader 9.0,
The file was created using Acrobat Pro 9.0.
You either used Cute or you used Acrobat. Which one?
If Cute was involved and the file shows 0kb, then it's a CutePDF issue. You'll want to talk to their people about it.
Similar Messages
-
Cannot open files in portable hard disk using USB 2.0
My friend using a 20G Portable Hard disk and told me that he could not open files on it when he connected it to his iMac G5 with the USB 2.0 cable. He gave it to me and I found the same result with my iMac G5 2.0. I have tried using Disk Utility's repair but found the rainbow ball rolls on and on. Whenever I tried to open any files with Finder, the rainbow ball appears again.
The portable hard disk is fine with PC and my friend said his G4 is alright with it too.
Is the problem due to iMac?Also, try connecting the drive directly to a USB port on the iMac. The USB ports at the back of the keyboard are convenient but slow, since its built-in hub is USB 1.1. It supplies a total of 500 ma, the same "juice" as other hubs, but the Apple Pro Keyboard uses half of that.
The ports on the iMac itself each supply the standard 500 ma, and are high speed USB 2 ports, so they are the preferred choice. -
FRM-10043: Cannot open file after converting SQL*Form 2.3 INP to 4.5 FMB
After running the f45gen32.exe on a version SQL*Form 2.3 INP file, it generates
the version 4.5 FMB adn the .err file (that does not indicate that any errors have occurred).
When I attempt to open the converted module using Developer 2000 v.1.3, it continuously
indicates the following error:
FRM-10043: Cannot open file
This error is received despite selecting all the required conversion parameters (per metalink and
other notes found on this forum).
This is a conversion of SQL*Forms version 2.3 to 4.5, with the ultimate goal of converting to 6i.
The same process works with other forms.?
Any suggestions would be greatly appreciated.Does anyone have a workaround for this issue?
Is Developer 2000 v.1.3 the incorrect version to use?
Thank you for your assistance. -
I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of Adobe InDesign CC (10.1). You must use that version or later to open the file." AARRGGHH! So how do I access the file?
Sounds like you opened and saved it in CC, so now you need to go back to CC and either complete the project there, or export to IDML to take it back into CS6.
-
Can't get OPP service started after OATM due to can't open file for reading
This is my second run on the OATM upgrade. OPP (and thus XML reports) came up fine after the 2nd run. After this run, had some issues with enqueing and solved them in an S/R with Oracle, but now I can't start OPP. I have tried all sorts of things, like aborting it in OATM, restarting, shutting down instance, running cmclean twice, resubmitting request, etc. Here is the error I get:
As System Administrator in forms, go to:
Concurrent -> Manager -> Administer
-> pick Output Post Processor (from the many manager in the list)
-> by the way it says "Activating" under status, seems stuck there.
-> then hit the Processes button
-> it will show a long list of "Terminated" and default to the first
one at the top.
-> Hit the "Manager Log" button
-> you now get
"APP-FND-01632: Cannot open file
/sechi/applcsf/log/SECHI_orav880d/FNDOPP1380237.txt for reading
Cause: [Routine] encountered an error when attempting to open file
sechi/applcsf/log/SECHI_orav880d/FNDOPP1380237.txt for reading
Action: Verify that the filename is correct, the environment variables
controlling that filename are correct, and the file exists.
Action: Verify that protections on that file permit reading by this
program
- but what is wierd is that the permissions on this dir are 777. I can see old OPP logs in that directory from before OATM. I can manually create a file with the name it complains about , then the app opens up the blank file with nothing in it. It seems that file is not getting created, not that it can't be opened.
If I need to change the log level of OPP please also tell me how to do that if it would provide some clues.
THanks MarvinOne more thing I am going to try first....
I am going to change the service ID of the OPP manager. It keeps trying
to restart the dead process maybe that it is..
Starting INVMGR Concurrent Manager : 25-JUN-2010 20:31:34
Starting INVMGR Concurrent Manager : 25-JUN-2010 20:31:34
Starting INVMGR Concurrent Manager : 25-JUN-2010 20:31:34
Starting STANDARD Concurrent Manager : 25-JUN-2010 20:31:34
Starting STANDARD Concurrent Manager : 25-JUN-2010 20:31:34
Starting STANDARD Concurrent Manager : 25-JUN-2010 20:31:35
Starting STANDARD Concurrent Manager : 25-JUN-2010 20:31:35
Starting STANDARD Concurrent Manager : 25-JUN-2010 20:31:35
Starting STANDARD Concurrent Manager : 25-JUN-2010 20:31:35
Starting STANDARD Concurrent Manager : 25-JUN-2010 20:31:35
Starting STANDARD Concurrent Manager : 25-JUN-2010 20:31:35
Starting STANDARD Concurrent Manager : 25-JUN-2010 20:31:36
Starting STANDARD Concurrent Manager : 25-JUN-2010 20:31:36
Starting STANDARD Concurrent Manager : 25-JUN-2010 20:31:36
Starting STANDARD Concurrent Manager : 25-JUN-2010 20:31:36
Starting STANDARD Concurrent Manager : 25-JUN-2010 20:31:36
Starting STANDARD Concurrent Manager : 25-JUN-2010 20:31:36
Starting STANDARD Concurrent Manager : 25-JUN-2010 20:31:36
Starting MRPMGR Concurrent Manager : 25-JUN-2010 20:31:36
Starting MRPMGR Concurrent Manager : 25-JUN-2010 20:31:36
Starting MRPMGR Concurrent Manager : 25-JUN-2010 20:31:36
Starting MRPMGR Concurrent Manager : 25-JUN-2010 20:31:36
Starting MRPMGR Concurrent Manager : 25-JUN-2010 20:31:36
Process monitor session ended : 25-JUN-2010 20:31:36
Process monitor session started : 25-JUN-2010 20:33:36
Starting WFMGSMD Concurrent Manager : 25-JUN-2010 20:33:37
Found dead process: spid=(999999), cpid=(1383584), Service Instance=(1012)
Starting WFMGSMS Concurrent Manager : 25-JUN-2010 20:33:37
Found dead process: spid=(999999), cpid=(1383585), Service Instance=(1013)
Starting FNDCPOPP Concurrent Manager : 25-JUN-2010 20:33:37
Found dead process: spid=(999999), cpid=(1383586), Service Instance=(1011)
Starting FNDCPOPP Concurrent Manager : 25-JUN-2010 20:33:37
Found dead process: spid=(999999), cpid=(1383587), Service Instance=(1011)
Starting FNDCPOPP Concurrent Manager : 25-JUN-2010 20:33:38
Found dead process: spid=(999999), cpid=(1383588), Service Instance=(1011)
Starting FNDCPOPP Concurrent Manager : 25-JUN-2010 20:33:38
Found dead process: spid=(999999), cpid=(1383589), Service Instance=(1011)
Starting FNDCPOPP Concurrent Manager : 25-JUN-2010 20:33:38
Found dead process: spid=(999999), cpid=(1383590), Service Instance=(1011)
Process monitor session ended : 25-JUN-2010 20:33:38
Process monitor session started : 25-JUN-2010 20:35:38
Starting WFMGSMD Concurrent Manager : 25-JUN-2010 20:35:39
Found dead process: spid=(999999), cpid=(1383591), Service Instance=(1012)
Starting WFMGSMS Concurrent Manager : 25-JUN-2010 20:35:39
Found dead process: spid=(999999), cpid=(1383592), Service Instance=(1013)
Starting FNDCPOPP Concurrent Manager : 25-JUN-2010 20:35:39
Found dead process: spid=(999999), cpid=(1383593), Service Instance=(1011)
Starting FNDCPOPP Concurrent Manager : 25-JUN-2010 20:35:39
Found dead process: spid=(999999), cpid=(1383594), Service Instance=(1011)
Starting FNDCPOPP Concurrent Manager : 25-JUN-2010 20:35:39
Found dead process: spid=(999999), cpid=(1383595), Service Instance=(1011)
Starting FNDCPOPP Concurrent Manager : 25-JUN-2010 20:35:40
Found dead process: spid=(999999), cpid=(1383596), Service Instance=(1011)
Starting FNDCPOPP Concurrent Manager : 25-JUN-2010 20:35:40
Found dead process: spid=(999999), cpid=(1383597), Service Instance=(1011)
Process monitor session ended : 25-JUN-2010 20:35:40 -
I have my photos in iPhoto but my iPhoto library is empty.When clicked message reads could not be opened image capture cannot open files in the photo library format. How do I get my photos back into my library?
When what is clicked?
There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
I cannot open files attached to an excel spreadsheet. I am using office for mac 2011. when double clicking object I only get the picture modifier windows.
Preventing Microsoft Office to open recent documents at startup in Mac OS, Please see:
http://www.frenchguys.com/wordpress/preventing-microsoft-office-open-documents-startup-mac-os-lion/
It seems that the solution works for most people.
In a terminal, enter the following:
defaults write com.microsoft.Excel NSQuitAlwaysKeepsWindows -bool false -
I am having a application in Visual Studio 2003 on Windows XP , Now I am Migrating the application in Visual Studio 2005 on Windows-7 .
In my Development PC , I was install Measurement Studio 2009 , NI DAQ 7.01 and Field Point 6.05.
my application is Showing following error:
Linking...
LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDl?l\Debug\BuildLog.htm"
NICfpDAQDll - 1 error(s), 0 warning(s)
When I copy from NiFieldPoint71D.lib library from Measurement Studio 7.1 and put in :\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib.
my application is Showing following error:
1>Linking...
1>atlsd.lib(atltrace.obj) : error LNK2005: "unsigned int (__stdcall* ATL::g_pfnGetThreadACP)(void)" (?g_pfnGetThreadACP@ATL@@3P6GIXZA) already defined in NiFieldPoint71D.lib(StdAfx.obj)
1>atlsd.lib(atlbase.obj) : error LNK2005: "class ATL::CAtlWinModule ATL::_AtlWinModule" (?_AtlWinModule@ATL@@3VCAtlWinModule@1@A) already defined in NiFieldPoint71D.lib(StdAfx.obj)
1> Creating library ..\..\lib\debug\NICfpDAQDll.lib and object ..\..\lib\debug\NICfpDAQDll.exp
1>..\..\bin\debug\NICfpDAQDll.dll : fatal error LNK1169: one or more multiply defined symbols found
I want to ignore NiFieldPoint71D.lib from using project setting(Linker->Input->ignore Specific Library ) but still it is showing same error.
In the project Setting I am done following setting:
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
Linker->Input->ignore Specific Library: mfcs71d.lib;libc.lib;'NiFieldPoint71D.lib
Please provide some solution.
Thanks
NityanandYou posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231 -
PDE-PLI038 Cannot open file for use as a PL/SQL library
Hi,
We are using oracle 12 .0.4 on RHAS 4
I am trying to compile a .pll file with the following code
frmcmp_batch module=$AP_TOP/patch/115/sql/apacrndb.pls userid=apps/apps module_type=LIBRARY;
but it's returning the error
PDE-PLI038 Cannot open file for use as a PL/SQL library
Thanks
UmairUmair,
What is the issue about?
Usually, it would be required to run the pls files to recreate certain objects (mainly packages) in the database, and you run the pls file from SQL*Plus as apps/applsys user.
Please update the SR and confirm with Oracle Support what the action plan you need to follow to resolve the issue.
Regards,
Hussein -
Issue regarding open word file and read only mode using c# & MS-word interop
i am programmatically open a word file for search and highlight keyword. my routine is working fine. the problem is when i am opening the file programmatically then a dialog come and ask me to open file in read only mode. the dialog look like below one
actually i do not want to open the file in read only mode because people can open and like to change and save. so guide me what i can do to not to open the file in read only mode.
here is my full code. just have a look and tell me what is wrong in my code or tell me any trick as a result i can open the file not in read only mode. here is my code.
private void button1_Click(object sender, EventArgs e)
object fileName = "";
string filePath = "";
string strSaveasPath = "";
DialogResult result = openFileDialog1.ShowDialog();
if (result == DialogResult.OK)
fileName = openFileDialog1.FileName;
//strSaveasPath = Path.GetDirectoryName(path.ToString());
//fileName = "Z:\\C0000000003.doc";
List<string> _list = new List<string>();
_list.Add("tridip");
_list.Add("arijit");
//object fileName = "D:\\CVArchievePath\\C0000000001.doc";
object textToFind = "test";
object readOnly = false;
Word.Application word = new Word.Application();
Word.Document doc = new Word.Document();
object missing = Type.Missing;
try
doc = word.Documents.Open(ref fileName, ref missing, ref readOnly,
ref missing,
ref missing, ref missing,
ref missing,
ref missing, ref missing,
ref missing,
ref missing, ref missing,
ref missing,
ref missing, ref missing,
ref missing);
doc.Activate();
object matchPhrase = false;
object matchCase = false;
object matchPrefix = false;
object matchSuffix = false;
object matchWholeWord = false;
object matchWildcards = false;
object matchSoundsLike = false;
object matchAllWordForms = false;
object matchByte = false;
object ignoreSpace = false;
object ignorePunct = false;
object highlightedColor = Word.WdColor.wdColorGreen;
object textColor = Word.WdColor.wdColorLightOrange;
object missingp = false;
Word.Range range = doc.Range();
foreach (string line in _list)
textToFind = line;
bool highlighted = range.Find.HitHighlight(ref textToFind,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing);
System.Diagnostics.Process.Start(fileName.ToString());
catch (Exception ex)
Console.WriteLine("Error : " + ex.Message);
//Console.ReadKey(true);
finally
//doc.Close(missing, missing, missing);
if(doc!=null)
System.Runtime.InteropServices.Marshal.ReleaseComObject(doc);
if (word != null)
System.Runtime.InteropServices.Marshal.ReleaseComObject(word);
word = null;
doc = null;
GC.Collect();
GC.WaitForPendingFinalizers();I know it's a very old issue and I reached to this page looking for a solution. Finally, I have found a fix to this problem.
The problem is that we create an instance of Word and do not close it correctly. This makes program believe that the file is already open and hence you're getting the respective message of file being locked by you.
Set the visibility of your application to true and then when you close it both file and instance should close and you will not get the problem again. -
I am Migrating a application in Visual Studio 2005.
In my development PC I was install the Measurement Studio 2009
my application is Showing following error:
1>Linking...
1>LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
1>Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDll\Debug\BuildLog.htm"
1>NICfpDAQDll - 1 error(s), 0 warning(s)
In the project Setting I am done following setting
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
but in "C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";" directory Not having the 'NiFieldPoint71D.lib' because Measurement Studio 2009 not provide this dll.
Please provide some solution.
Thanks
NityanandYou posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231 -
I am Migrating a application in Visual Studio 2005.
In my development PC I install the Measurement Studio 2005.
my application is Showing following error:
1>Linking...
1>LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
1>Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDll\Debug\BuildLog.htm"
1>NICfpDAQDll - 1 error(s), 0 warning(s)
In the project Setting I am done following setting
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
but in "C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";" directory Not having the 'NiFieldPoint71D.lib' because Measurement Studio 2009 not provide this dll.
Please provide some solution.
Thanks
NityanandYou posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231 -
Error Message when installing updates: "Cannot open file (-3001)"
I have a MacBook3.1. with Mac OS 10.5.7. Three days ago I installed 5 to 6 updates for iTunes, iDVD, AirPort Express, Java, etc. After the installation, I could not access the internet because my AirPort wireless on the Mac was off (non-existent). I could not even scan for my network. I could not access iTunes, in fact when I opened iTunes, the application got stuck and I could not even "force quit" the application. I went to the Apple Store and was told to Re-install the original OS discs (10.5) received with the MacBook, which I did. After the installation things seemed to be back to normal. I was able to access the internet, etc. However, I could not open iTunes because and I paraphrase "the iTunes version that created/supported the application is not.....". OK so I need to update the software. Now, when I tried to update the software with the newly installed "re-install" 10.5 OS I received the following message:
"A networking error has occurred: Cannot open file (-3001). Make sure you can connect to the Internet, then try again."
Meanwhile, I was searching the internet googling the above message. So internet access was not the issue. I decided to create a "test" admin account to see if I could update from another account. Low and behold, I was able to access and update each new software update from the new "test" account and ultimately open iTunes from my personal (main) account.
Very confused and could use some guidance. Any ideas?Welcome to Apple Discussions:
My general rules:
Never install more than one update at a time - especially those requiring a reboot.
Whenever possible, use the manual updates and for OS updates, always use the manual combo update.
If a problem does occur, reinstall any "bad" updates with manual updates. Yes, they can be reapplied.
Again, one at a time. -
Upgrade Plug-ins error (Cannot Open File)
I was working on a document in CS3 as a final thesis for my masters work. I was using a Blurb template in order to export the file for printing. In between working on the file, one afternoon I could no longer open the file and was met with the follwing error:
Cannot Open File
IMAGE.RPLN
IMAGE FILTERS.RPLN
HYPERLINKS.RPLN
"Cannot open "Masters_book dec.indd".
Please upgrade your plug-ins to their latest
versions, or upgrade to the latest version of
Adobe InDesign."
I hadn't changed any other files on my computer or ran any updates. I was simply met with the error when I tried launching the application. After trying to run necessary updates I was still met with the same error message. I downloaded the trial version of CS5 on another machine and tried to open it and was once again met with the above error message. I have a back up of the file that I can use but it still represents a lot of lost work if I have to resort to an old file.I probably shouldn't dwell, on this, but I can get really worked up over it.
I come from the Cosmos and I can assure you we have sent no "Rays" to your puny Earth Planet today!(*)
Since this concerns a CS3 file and I haven't seen posts of others having the same issue, either with CS3 or with any other version, I have to take it as a One-Time Fluke.
I'm pretty firmly convinced this never happens. There are real problems and even if we only see them once, they are happening hundreds and thousands of times and going unreported and undetected, but they are no less real. In fact, because of the reporting bias towards repeatable problems, they are probably causing added frustration and confusion without being detected or fixed properly. So, IMNSHO, we owe a larger duty to pay attention to so-called "unreproducible" bugs.
(You can imagine how well these conversations with Adobe Support go...)
Of course, in this case, it's probably really hard to find the problem. And since it's effectively an end-of-life'd product that is 3 versions behind the released product and at least 4 versions behind the development product, well, it's hard to lose too much sleep over it.
(*) Yes, I know, this incident would not have been "today." Consider it time dilation. -
I have received a file from overseas which looks like the CS5 indesign icon, but which I cannot open through my CS5 indesign software. The message SHAREDCONTENT.RPLN first appears and then after clicking OK to open anyway, Cannot Open File appears with a list of missing plug-ins. The message reads: Please upgrade your plug-ins to their latest versions or upgrade to the latest version of Adobe Indesign. I have not been able to find these plug-ins online and I'm not financially able to upgrade just yet! Any ideas anyone?
Another alternative that you can use, is ask for the IDML version of the document along with the assets like images and fonts used in the original document. You can open IDML version of the document in CS4, CS5, CS5.5 AND CS6 versions of InDesign.
Once open just relink the images sent as assets to you and place the fonts in the required folder and you are all set to use your doucment, save the document in the INDD format and you have your InDesign file. This will be an easy way for you as it will save you installation time for ID CS5.5 and also allow you to not upgrade and buy a license for it if you don't require it.
Thanks,
-Manan
Maybe you are looking for
-
Since I updated my pages to 5.01, I can't open documents created on my iPad today. It says you need a new version of pages to open document. (My computer says it is installed). Has any one encountered this?
-
REP-300 Error while running report using App Server
Hi, I am currently trying to run a report using the Application Server. This report is being called from a form. I am able to connect to the report server and all configurations seems to be correct. But when I execute the report from the form, I am g
-
I can t update my ipod 4th gen. for facebook because I uninsatalled the program itunes from my computer as it didn t work well it would freeze on me all the time. So i installed another version for windows 7 premium 64 bits, but when i tried to open
-
I have a Macbook Pro and would like to do a complete reformat. I installed Moutain Lion when it came out and do not wish to pay again since I've already paid. I have OS 10.6.4 discs with me which didnt come with my MB but with my previous one. What i
-
Upgrade Win XP Bootcamp partition to Win7?
I read the docs that says you cannot upgrade XP directly to Win 7 as it requires a 'clean install' from an external CD. I have someone on ebay who purports to be selling me an upgrade CD that will do this "The Win7 upgrade I'm selling will allow you