Cannot open "filename" because it was saved with a newer version of Adobe InDesign CC (10.0).
I updated my whole cloud last week. Now I can't open a InDesign document saved just the day before. I get the error message:
Cannot open “filename” because it was saved with a newer version of Adobe InDesign CC (10.0).
Cannot open “filename” because it was saved with a newer version of Adobe InDesign CC (10.0). You must use that version or later to open the file. To then enable it to be opened in this version, choose save as InDesign CS4 or later, or export to IDML.
This is a document that I created in InDesign CC just last week.
Hi Robert,
To open an INDD file in the older version (CS4-CC), you need to save it as an IDML. For CS3 & older versions, save it as an INX.
Thanks
Similar Messages
-
I am in the middle of a job using CS 6, but at the same time opening the Creative Suite apps. I created an InDesign file in CS 6, saved it, and now I can't open it. I'm getting this message: Cannot open file because it was saved with a newer version of Adobe InDesign CC (10.1). You must use that version or later to open the file." AARRGGHH! So how do I access the file?
Sounds like you opened and saved it in CC, so now you need to go back to CC and either complete the project there, or export to IDML to take it back into CS6.
-
Is there any way I can open this file? I am using creative cloud.
Thanks!You need to install the latest version CC2014.2
-
I uninstalled and deleted ver 11, installed ver 10.7 because ver11 won't work on my XPsp3 machine with my vinyl conversion software to mp3, but upon launch i get :"itunes library.itl cannot be read because it was created with a newer version of itunes'.
Hello, Stephen.
Thank you for the question. You will need to rebuild your iTunes library file in order to open an older version of iTunes. Below, I have included the article that walks you through this process. Start with the section labeled Re-creating the iTunes Library file.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Cheers,
Jason H. -
I tried opening itunes today and got the message that I cannot access itunes because it was saved in a newer version.I have been using itunes for 10 years and never gotten this. I cannot restore an earlier version...any suggestions?
Unless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
tt2 -
My computer is reading "The file 'iTunes Library.itl' cannot be read because it was created with a newer version of iTunes." I need help ASAP! Did I lose all my music?
Unless you deliberately downgraded iTunes this may be a sign of a corrupt library. SeeEmpty/corrupt library after upgrade/crash.
tt2 -
After installing latest iTunes, I began getting R6034 Runtime Error messages, found fix of removing 5 Apple programs, reboot and reinstall iTunes. Seemed to work but now getting error message that my iTunes Library (iTunes Library.itl) cannot be read because it was created with a newer version of iTunes. Need Help!!!
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
Saved with a newer version of Adobe indesign (CS8.0)
latest version of creative cloud will not open indesign files i get "saved with a newer version of Adobe indesign (CS8.0)"
You've got the wrong version of InDesign to open the file, it's that simple.
InDesign Cs6 is available on Creative Cloud, and if that's up to date it won't open InDesign CC or InDesign CC 2014 files.
You'll need to download InDesign CC2014 from the Creative Cloud. -
Error: iTunes cannot open library because it was created by a newer version
alas, I just updated to iTunes 8 and it is giving me this message! I really want to listen to music right now!
I tried your suggestion and it worked fine except when I open the iTunes window, it doesn't allow me to drop the iTunes Library. I tried dropping it in the open area, over Music, Over Library etc. without any success. The circle with the line through it does not change to an arrow which indicates okay to drop.
What led to this error is this: My car has Text To Speech (TTS) recognition built into the music system. After plugging in my iPod, the system can speak back to me various options from the iPod such as playlists, albums, artists, genres. Only problem was that it doesn't support iTunes version greater than 7.
So I deleted version 8.0 and reinstalled 7.02
After following your directions I am now able to open the iTunes Window which I could not do before. The Music Library which was moved to a different directory according to your directions, does not drop anywhere in the iTunes window.
Am I missing something? Hope you can help. -
Can anyone see this question - not sure if I'm doing this right...
Had same problem and solved it without having to reinstore any music or movies:
1. Delete old Library file
2. Go to the 'Previous iTunes Libraries' folder and copy one of the earlier files - note, they have a date extension, e.g. 'iTunes Library 2011-11-01'.
3. Paste this file in your iTuners folder and rename file by removing the date extension - 'iTunes Library'
You should have all your music and paylists in tact, unless it was a really old previous file. -
Can anyone help me with this problem. I tried updating the latest itunes and it caused an error MSVCR80.dll missing. I then tried fixing it after reading other people had the same problem and a solution was given about uninstaling itunes and the order in which to do that. I did that but now get the error "the files "itunes library.itl" cannot be read because it was created with a newer version of itunes. I see a solution has been given about this but I cannot find what is suggested to enable me to follow instructions. Can anyone please go through step by step (letting me know where I can find what is needed) to enable me to be able tio log into itues again. Thanks
Hi pussygalore,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
You may want to make sure that in the last step (reinstalling iTunes) that you are installing the latest/newest available version, and not attempting a reinstall from an older file.
Regards,
- Brenden -
Before I posted, I already tried the method from the posts below, btw my system is Windows 7
The file "iTunes Library.itl" cannot be read because it was created with a newer version of iTunes
Re: The file “iTunes library.itl” cannot be read because it was created by a newer version of iTunes.
Empty/corrupt iTunes library after upgrade/crash
Even I uninstalled iTunes 11 and installed iTunes 10.7, still shows due to itunes library itl cannot be read because it was created by a newer version of itunes.
It bothered me for whole week, I could not update my iPod, neither my iPhone and iPad, please help.Hold down shift as you start iTunes and keep holding until prompted to choose or create a library. Click create. Make a new library at the root of a drive called iTunes Test, e.g. C:\iTunes Test or D:\iTunes Test. This should establish that iTunes itself is working. Where is your active library supposed to be?
For general advice if iTunes itself has a problem see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies. You should normally install the current version of iTunes.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
We have a Dell computer with iTunes (which we have had for years) and are suddenly unable to open it. The message: This file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help!!
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
when i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version. What to do?
Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X -
after I reinstall Itunes, the message read "the file iTunes Library.it cannot be read because it was created by a newer version of itunes, i have tried with iTunes version 11.1, 10.1 and 9.1 still come up with the same message and will not open iTunes
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash
Maybe you are looking for
-
How to open a new JSP as a Popup
Hello everybody, I have quite some experience working with java web dynpros, however I now have a requirement to work on an existing JSP page to add some new functionality, and I'm a little bit lost since this is the first time I work with JSPs in S
-
Store/Read JPG/GIF as file on Application server,cluster table/MIME Rpstory
Hello All , I was trying to build up a ImageStore proxy class to save JPG/GIF in the following ways . u2022 File format on Application server with GUID reference / Whenever I need I can read/ archive it with ID# u2022 In cluster table - Sam
-
Calling all Lightroom wizards - aka a converter for all seasons!
Hi all, I have been using Lightroom since b2 and absolutely love it, but deep down there has always been a little part of me that believes it could do RAW conversions better. THE ISSUE: I know that for some images one converter works better than anot
-
Lost In The Time Machine - Help!
Hello, I sincerely apologize, in advance, if I am repeating old history here and for all the questions. Time Machine has got me confused… I’ve read the FAQ’s/Threads but still not sure about how to proceed. I’m a ex Microsoft Windows guy and Mac newb
-
Enhancing standard ESS Component
Hi Experts, I am going to make changes in standard ESS component in WD ABAP through enhancement button given on menu by creating an enhancement implementation. I want to know is it the right way to create enhancement and suppose any enhancement packa