Cannot Open Files From Old Logic

I used to work on Logic 4.8 Platinum, until my usb key was damaged. Now I cannot open any of my old songs in Logic 8. What do I do? How can I obtain a replacement usb key from a version that is so old and discontinued?

I believe you have to open your 4.8 songs in Logic 5 or above; then you can open these songs as projects in Logic 8.
Maybe you even have to go via the Logic 6 route, I´m not 100% certain, but something along these lines anyhow.
/juhani

Similar Messages

  • Cannot open file from old PC into Firefox

    I have a folder from my old PC (that was onWindows 7) that a teccie loaded for me so i could access my old files. However when i locate the folder/file, and double click it, and get the 'You have chosen to open file..' etc box, which has 'Firefox (default) or other (i chose FF) and click ok, i just get the same box come up again as a new tab, and each time i click ok it does the same ad infinitum! How do i actually open a particular file in this folder? many thanks. p.s. i am not very technical so any advice needs to be relatively simple, thanks

    What kinds of files are they? Can you see the file extensions? Windows may be hiding those, unhide them using the steps in this Microsoft support article: [http://windows.microsoft.com/en-us/windows/show-hide-file-name-extensions].
    If Firefox does not think it can open a file, forcing it to try can create that infinite loop problem. You may be able to remove the dysfunctional association in the Options dialog:
    "3-bar" menu button (or Tools menu) > Options > Applications
    Or if it can't be found there, you can delete the settings file that Firefox uses to store the associations to return to the default settings for unrecognized files. Here's how:
    Open your current Firefox settings (AKA Firefox profile) folder using either
    * "3-bar" menu button > "?" button > Troubleshooting Information
    * Help menu > Troubleshooting Information
    In the first table on the page, click the "Show Folder" button
    Leaving that window open, switch back to Firefox and Exit, either:
    * "3-bar" menu button > "power" button
    * File menu > Exit
    Pause while Firefox finishes its cleanup, then rename '''mimeTypes.rdf''' to something like mimeTypes.old
    Then you can start Firefox back up again and it should create a fresh mimeTypes.rdf file.

  • Ical alarm keeps trying to open file from old location

    I have an iCal alarm to open an accounts file each day.
    I moved the file to another folder,
    and selected the new location iniCal.
    It always gives me this:
    Could not open file because 'Old/Path/to/File'  could not be found.
    When I look at the alarm section in the iCal event, there is a list of files.
    When I choose the file (with the same file name) in the NEW folder, this list of files doesnt seem to update.
    Is there of forcing iCal to open my new file path?
    or a way of taking the OLD file out of this list?
    Thank you for your help
    Frazer

    I just found how to removed the old files from my list
    in the terminal I type:
    open library/preferences/com.apple.iCal.plist
    and then delete the entries under PersistentMenu
    Would still love to hear a more user friendly way to do this.
    And a way to just get iCal to open the new file path, or how best to report this bug to apple

  • Cannot open file from Bridge after saving in Photoshop CS3

    I was working on three images in Photoshop CS3, when I went to open them from Bridge for review, two of three files were reduced to tiny white squares with a dogear in the top right corner, a little blue bounding box containing three tinier red green and blue somethings so small I couldn't even see what they were with my jewellery spec.
    Nothing happened when I clicked on them, no error message, nothing. I managed to get one of them in 'reveal' - which opened up a larger blue bounded box with the red button containing a cross with the message 'cannot open as not right kind of file'.
    What to do please? I don't want to spend hours on an image and hope it will open afterwards. Thankyou.

    Thankyou for taking the time to respond. I did notice that I'd forgotten to place a . after the file name and before the extension - ie soiphotopsd, instead of soiphoto.psd, and renamed them and the opened as psds. I would have thought that Photohop CS3 with all it's bells and whistles could have provided a helpful popup/error message to this effect when saving images though!
    I still have an old file I haven't been able to open, the icon of which is simply a small blue and white box with the letters pmg on the bottom. I tried to rename the file same as, but nothing seemed to work so far. Will just keep plugin away - forgive the pun.
    Thanks again.

  • Mk:@MSITStore cannot open file from within RoboHelp

    Have recently upgraded to RoboHelp 8 and now see the much discussed "Cannot open the file: mk:@MSITStore:<path>" error but only when trying to view .chm files from RoboHelp for Word, by clicking "View Primary Layout".  Weirdly enough, some projects display the .chm correctly when clicking "View Result" right after generating the help file, some projects do not.  Viewing .chm directly from output location is always fine.  For very small projects, the "View Primary Layout" button seems to work.  For very large projects, the error message always occurs.  I've un-registered and re-registered hhctrl.ocx as well as downloaded, replaced and registered the previous ocx version (4.73.8412.0) as well as re-registered itss.dll  The OS is Windows XP Professional with IE 7.  Suggestions please?  Thanks!

    RoboHelp 8
    XP Pro
    I recently ran into a problem viewing some pdfs and Word Documents in a generated html help file.
    Setup:
    pdfs and .docs in baggage files
    links to the baggage files created in tables
    2 tables in each topic
    pdfs/docs in first table in each topic opened without a problem
    pdfs/docs in second table would not open -  address bar display:
    (Example)
    mk:@MSITStore:C:\EOCs\!SSL!\Microsoft_HTML_Help\BlueMedicare_EOCs.chm::/2012_EOCs/2012_WS_ Book.pdf
    (Pause for much gnashing of teeth, pulling of hair, angst, frustration and thinking) but no pdf (or Word doc)
    I can't change registry entries or any other computer settings.  No administrative rights.
    Anyway, it couldn't be an outdated registry entry because within one project, some pdfs and docs displayed as expected and others didn't.
    Checked to see what the differences were in the tables/cells that worked vs the ones that didn't.
    Looking at the HTML,  I found "target=_blank" in each row of the tables that failed to display a baggage file.
    I replaced "target=_blank" with no replacement text -  I left Replace with blank.
    Voila!  All pdfs and docs open just as expected.
    I hope this helps someone. 

  • Cannot migrate files from old MacBook to new MacBook Pro

    I have been trying without success to migrate files from my old MacBook to my new one.  The Migration Assistant doesn't work.  The new Mac recognizes the old one but the old one cannot see the new one.  The old MacBook has OS 10.5.8 and the new MacBook Pro has 10.8.1.
    Then I tried migrating from my Time Machine backup, with the external drive still connected to the old MacBook, but it kept telling me I didn't have enough space to copy anything, even when I unchecked everything except my Documents folder.
    I went to the Apple Store and one of their "geniuses" told me I could connect the external hard drive directly to the new MacBook Pro and migrate the files from there.  That didn't work either; I got an error message about incompatible software.
    The genius also told me that I could back up the new MacBook Pro to the same external hard drive with Time Machine that I'd been using and that I'd be able to restore from backups from either computer, but that's not true.  I cannot see any backups on the drive except from the new computer.  Time Machine does recognize that there is space in use on the drive but will not show me any of the content.
    Does anyone know how I can migrate my files, short of copying them to a flash drive and doing it the old-fashioned way?  Thank you!

    It is possible to merge accounts but it is not easy nor foolproof. The easier solutions:
    1. Remove the account made in Setup Assistant and change the username on the migrated account.
    See Mac OS X- How to change user short name or home directory name.
    See Macworld | Changing the short username in Leopard - use the last procedure, "The Full Monty."
    2. Log into the migrated, renamed account and delete the account made in Setup Assistant, then re-migrate your data.

  • How to open files from old claris works with Appleworks 6 in OS X 10

    Hi,
    I have some claris works files backed up on a zip disk from a G3 with OS 7.X.
    Now I try to open them on another G3 with Appleworks6 in OS X 10.
    In Appleworks, I choose "open file" but those files are grey out so I cannot choose them. Is there anyway I can open those files in OS X 10?

    Kuul, welcome to Apple Discussions.
    MacLinkPlus @ http://www.dataviz.com/products/maclinkplus/ will probably translate the files so you can open them.
     Cheers, Tom

  • Cannot open files from USB external harddrive in XP

    Used this same harddrive in previous iMac OSX10.4 / Windows XP computer and it worked perfectly. Also used in computer labs for Macs and Windows at school. Never any problems. Fresh new Macbook pro and XP PRO install and while in XP the drive is visible but you cannot open a file directly from the folders in windows explorer. You can however drag a file to the desktop and it will open it there. There is something in the file path which XP / bootcamp is not liking? Files open perfectly from my XP on my HP. Ideas?

    Went into administrative/disk management and poked around. Just changed drive letters and all is OK. Thanks anyway.

  • Simply cannot open file from within Illustrator CS3

    When working in CS3 in 10.5.8 I go to open file and select a document nothing happens. It is as if I did not attempt the command. This just began happening about a week ago. I've been on CS3 for over 2 years. In order to open each file - I must locate the file in its folder and double click on it to open the file. However going to open recent files does work. I have tried re-launching Illustrator by holding down the Shif/Option/Cmmd to refresh the prefs but that did not work. Any ideas? thanks.

    Mike Gondek2 wrote:
    Good job on your troubleshooting so far. Answer could be in the OS rather than within Illustrator. Try running Applications>> Utilities >> Disk Utility and fixing the permissions.
    Mike has the probably cause of this if repairing the permissions with the disk utility does not work do not give up on this procedure.
    You can do it manually in case the disk utility over looks this folder.
    Control or right click on the folder where these files are and then go to get info and where it says Ownership and Permissions  check to see if all the users listed have permission to use the contents of the folder, it will say read/write.
    This can also be true for specific files and for directors higher up like folder for a client that contains these other folders,or partition of a drive which contains the folders and parent folders as well as for an entire hard drive so you have to check the entire hierarchy on occasion. If it is a foder or higher directory there is the option oncce you set the permissionfor the directory to have it apply to all files and directories contained within.
    Mike's advice and the folder are fine then it might be a corrupt settings folder. So you can try this as well.
    1. Quit Illustrator.
    2.Go to User/username/Library/Preferences/ Adobe illustrator CS4 Settings and trash the settings folder, the whole folder not just the contents of the folder..
    3. Start Illustrator. Illustrator creates a new preferences file.

  • Cannot open files from Application Navigator without JDeveloper freezing

    Completely bewildered by this... please help.
    Been using JDeveloper 11.1.1.0.1 Build JDEVADF_MAIN.BOXER_GENERIC_081203.1854.5188 (pointing to Java 1.6.0.16) for a few months now. Every week or so I take a copy of my project (just take the whole project directory out of the JDeveloper/mywork directory) on my workstation and place on another identically configured workstation. This week, when I tried to do that and open JDeveloper on that 2nd workstation, JDeveloper froze. After reboots and retries, as far as I can get is to be able to open JDeveloper, single click on files in the Application Navigator (their properties show up in the Structure window), but if I try to open any of the source files (either by double clicking on them or right click -> open), JDeveloper freezes.
    What's weird is that I tried uninstalling Java and Jdeveloper on that 2nd workstation and reinstalling a fresh Java and Jdeveloper instance - with none of my code or projects -- just a clean off the oracle.com version of JDeveloper -- and I still had the same problem. I created a brand new application, project, and new class and I still cant click on the Class1.java to edit or view it without JDeveloper freezing.

    Arun,
    Thank you for the response.
    Many apologies - please ignore the exception I posted. The C:\Program Files\JDeveloper\modules was missing because on the last time I re-installed JDeveloper I forgot to copy that directory.
    Nonetheless, I reinstalled JDeveloper (again - this time correctly!) and I am still having the same symptoms (but no exception). I run jdev.exe from the command prompt, JDeveloper opens, I can create a new application, project, and class/.java file, but I cannot double click on the .java file to view or edit it. JDeveloper freezes and there is no exception in the command window.
    I tried running Process Monitor when I double click on the .java file to see if there are any obvious errors. (See the log below.) However, I'm not sure if these are "normal"/expected errors or not.
    I don't know what else to do at this point. Any other suggestions you can give are welcome.
    Thanks.
    (PS - I tried Puthanampatti's suggestion of modifying the ide.conf and jdev.conf, but received an error, "Unable to create an instance of the Java Virtual Machine. Located at path: C:\Program Files\Java\jdk1.6.0_16\jre\bin\client\jvm.dll", so I just restored the original ide.conf and jdev.confs to get rid of that error.)
    "Time of Day","Process Name","PID","Operation","Path","Result","Detail"
    "7:55:45.6616246 AM","jdeveloper.exe","732","QueryOpen","C:\Program Files\JDeveloper\jdeveloper\system\system11.1.1.0.31.51.88\o.ide.externaltools\tools.xml","NAME NOT FOUND",""
    "7:55:48.2424071 AM","jdeveloper.exe","732","QueryOpen","C:\Program Files\JDeveloper\jdeveloper\system\system11.1.1.0.31.51.88\o.ide\diagnostics\JDEVELOPER-ACTIONS-20091111-075548.txt","NAME NOT FOUND",""
    "7:55:48.2471507 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\src\project1\.svn","NAME NOT FOUND",""
    "7:55:48.2472873 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\src\.svn","NAME NOT FOUND",""
    "7:55:48.2474172 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\.svn","NAME NOT FOUND",""
    "7:55:48.2475125 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\.svn","NAME NOT FOUND",""
    "7:55:48.2476021 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\.svn","NAME NOT FOUND",""
    "7:55:48.2476753 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\.svn","NAME NOT FOUND",""
    "7:55:48.2477485 AM","jdeveloper.exe","732","QueryOpen","C:\.svn","NAME NOT FOUND",""
    "7:55:48.2480117 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\src\CVS\Root","PATH NOT FOUND",""
    "7:55:48.2480885 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\CVS\Root","PATH NOT FOUND",""
    "7:55:48.2481751 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\CVS\Root","PATH NOT FOUND",""
    "7:55:48.2482539 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\CVS\Root","PATH NOT FOUND",""
    "7:55:48.2483548 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\CVS\Root","PATH NOT FOUND",""
    "7:55:48.2484257 AM","jdeveloper.exe","732","QueryOpen","C:\CVS\Root","PATH NOT FOUND",""
    "7:55:48.2488171 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\src\project1\.svn","NAME NOT FOUND",""
    "7:55:48.2489462 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\src\.svn","NAME NOT FOUND",""
    "7:55:48.2490610 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\.svn","NAME NOT FOUND",""
    "7:55:48.2491479 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\.svn","NAME NOT FOUND",""
    "7:55:48.2492317 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\.svn","NAME NOT FOUND",""
    "7:55:48.2493046 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\.svn","NAME NOT FOUND",""
    "7:55:48.2493767 AM","jdeveloper.exe","732","QueryOpen","C:\.svn","NAME NOT FOUND",""
    "7:55:48.2499533 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\src\project1\.svn","NAME NOT FOUND",""
    "7:55:48.2500851 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\src\.svn","NAME NOT FOUND",""
    "7:55:48.2501927 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\.svn","NAME NOT FOUND",""
    "7:55:48.2502829 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\.svn","NAME NOT FOUND",""
    "7:55:48.2503704 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\.svn","NAME NOT FOUND",""
    "7:55:48.2504436 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\.svn","NAME NOT FOUND",""
    "7:55:48.2505168 AM","jdeveloper.exe","732","QueryOpen","C:\.svn","NAME NOT FOUND",""
    "7:55:48.4373422 AM","jdeveloper.exe","732","ReadFile","C:\Program Files\JDeveloper\jdeveloper\system\system11.1.1.0.31.51.88\o.jdeveloper\ToDoItems.xml","END OF FILE","Offset: 146, Length: 16,284"
    "7:55:48.4594115 AM","jdeveloper.exe","732","QueryDirectory","C:\Program Files\JDeveloper\jdeveloper\system\system11.1.1.0.31.51.88\o.jdeveloper\audit\profiles","NO MORE FILES",""
    "7:55:48.5261286 AM","jdeveloper.exe","732","NotifyChangeDirectory","C:\JDeveloper\mywork\Application1\Project1\src\project1","NOTIFY CLEANUP","Filter: FILE_NOTIFY_CHANGE_FILE_NAME, FILE_NOTIFY_CHANGE_DIR_NAME, FILE_NOTIFY_CHANGE_LAST_WRITE"
    "7:55:48.5270483 AM","jdeveloper.exe","732","NotifyChangeDirectory","C:\JDeveloper\mywork\Application1\Project1\src\project1","NOTIFY CLEANUP","Filter: FILE_NOTIFY_CHANGE_FILE_NAME, FILE_NOTIFY_CHANGE_DIR_NAME, FILE_NOTIFY_CHANGE_LAST_WRITE"
    "7:55:48.5763939 AM","jdeveloper.exe","732","NotifyChangeDirectory","C:\JDeveloper\mywork\Application1\Project1\src\project1","","Filter: FILE_NOTIFY_CHANGE_FILE_NAME, FILE_NOTIFY_CHANGE_DIR_NAME, FILE_NOTIFY_CHANGE_LAST_WRITE"
    "7:55:49.2833148 AM","jdeveloper.exe","732","ReadFile","C:\Program Files\JDeveloper\jdeveloper\system\system11.1.1.0.31.51.88\o.jdeveloper\audit\profiles\code-assist-rules.xml","END OF FILE","Offset: 27,798, Length: 5,016"
    "7:55:49.3666653 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\classes\java.class","NAME NOT FOUND",""
    "7:55:49.3670078 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\src\java.java","NAME NOT FOUND",""
    "7:55:49.3674403 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\src\java.sqlj","NAME NOT FOUND",""
    "7:55:49.3677512 AM","jdeveloper.exe","732","QueryOpen","C:\Program Files\Java\jdk1.6.0_16\jre\lib\sunrsasign.jar\java.class","PATH NOT FOUND",""
    "7:55:49.3707901 AM","jdeveloper.exe","732","QueryOpen","C:\Program Files\Java\jdk1.6.0_16\jre\classes\java.class","PATH NOT FOUND",""
    "7:55:49.3714458 AM","jdeveloper.exe","732","CreateFile","C:\Program Files\Java\jdk1.6.0_16\jre\lib\sunrsasign.jar","NAME NOT FOUND","Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a"
    "7:55:49.3718358 AM","jdeveloper.exe","732","CreateFile","C:\Program Files\Java\jdk1.6.0_16\jre\classes","NAME NOT FOUND","Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a"
    "7:55:49.3888637 AM","jdeveloper.exe","732","CreateFile","C:\Program Files\Java\jdk1.6.0_16\jre\lib\sunrsasign.jar","NAME NOT FOUND","Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a"
    "7:55:49.3892489 AM","jdeveloper.exe","732","CreateFile","C:\Program Files\Java\jdk1.6.0_16\jre\classes","NAME NOT FOUND","Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a"
    "7:55:49.4202677 AM","jdeveloper.exe","732","CreateFile","C:\Program Files\Java\jdk1.6.0_16\jre\lib\sunrsasign.jar","NAME NOT FOUND","Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a"
    "7:55:49.4205085 AM","jdeveloper.exe","732","CreateFile","C:\Program Files\Java\jdk1.6.0_16\jre\classes","NAME NOT FOUND","Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a"
    "7:55:49.4331182 AM","jdeveloper.exe","732","CreateFile","C:\Program Files\Java\jdk1.6.0_16\jre\lib\sunrsasign.jar","NAME NOT FOUND","Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a"
    "7:55:49.4333241 AM","jdeveloper.exe","732","CreateFile","C:\Program Files\Java\jdk1.6.0_16\jre\classes","NAME NOT FOUND","Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a"
    "7:55:49.4404331 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\classes\oracle.class","NAME NOT FOUND",""
    "7:55:49.4408477 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\src\oracle.java","NAME NOT FOUND",""
    "7:55:49.4410449 AM","jdeveloper.exe","732","QueryOpen","C:\JDeveloper\mywork\Application1\Project1\src\oracle.sqlj","NAME NOT FOUND",""
    "7:55:49.4413860 AM","jdeveloper.exe","732","QueryOpen","C:\Program Files\Java\jdk1.6.0_16\jre\lib\sunrsasign.jar\oracle.class","PATH NOT FOUND",""
    "7:55:49.4416464 AM","jdeveloper.exe","732","QueryOpen","C:\Program Files\Java\jdk1.6.0_16\jre\classes\oracle.class","PATH NOT FOUND",""
    "7:55:49.4421182 AM","jdeveloper.exe","732","CreateFile","C:\Program Files\Java\jdk1.6.0_16\jre\lib\sunrsasign.jar","NAME NOT FOUND","Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a"
    "7:55:49.4425062 AM","jdeveloper.exe","732","CreateFile","C:\Program Files\Java\jdk1.6.0_16\jre\classes","NAME NOT FOUND","Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a"
    "7:55:49.4430267 AM","jdeveloper.exe","732","CreateFile","C:\Program Files\Java\jdk1.6.0_16\jre\lib\sunrsasign.jar","NAME NOT FOUND","Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a"
    "7:55:49.4434318 AM","jdeveloper.exe","732","CreateFile","C:\Program Files\Java\jdk1.6.0_16\jre\classes","NAME NOT FOUND","Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a"
    "7:55:49.4438176 AM","jdeveloper.exe","732","CreateFile","C:\Program Files\Java\jdk1.6.0_16\jre\lib\sunrsasign.jar","NAME NOT FOUND","Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a"
    "7:55:49.4441746 AM","jdeveloper.exe","732","CreateFile","C:\Program Files\Java\jdk1.6.0_16\jre\classes","NAME NOT FOUND","Desired Access: Read Data/List Directory, Synchronize, Disposition: Open, Options: Directory, Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, AllocationSize: n/a"

  • Please help I keep getting this message, cannot open files from server

    Nov 18 11:47:25 design-2s-mac-pro.local mdworker[1046]: (Normal) Import: Using too many resources after 1920 files (wired: 0 resident: 3358 swapped: 0 regions: 2076), hit usage threshold importing /System/Library/Frameworks/Tk.framework/Versions/8.5/Resources/Scripts/tearoff. tcl, exiting to clean up now.
    a window pops up with the warning "The software cannot be found" along with a "Document" icon - the blank sheet of paper with the corner folded down.

    Getting this message from what application?  Are you in the terminal?   What are you doing?

  • InCopy CS6 "Cannot Open File" from InDesign CC

    I'm trying to review copy recently posted by my designer. I'm using InCopy CS6 and she recently upgraded to InDesign CC. We never had a problem before, but now I'm getting the following error:
    I'm running Windows 8 and she's on a Mac (not sure which OS).
    Any thoughts?

    For real? I can't believe that the latest version of the standalone InCopy can't play with InDesign CC. My designer is a contractor and just spent a lot of money to upgrade to CC, and my employer didn't want to pay for all of CC, so they just got me Incopy CS6.

  • Opening files from LR5 to PS CC

    I have LR 5 and PSCC installed. I cannot open files from LR into PS unless it is a smart object. Then when I save the file in PS CC i get the error message
    Error 2 : photoshop is undefined
    Line1-^ photoshop.notifyLightroomDocSaved ('lightroom 2.0',----
    I fear I have shifted some PS files in an effort to make space on my C drive where I have PS installed.

    If that did happen, then you will need to reinstall photoshop to fix it. Try uninstalling first, it may have a repair option. (I don't recall if it did or not)

  • Just upgraded to Lion and cannot open files on my old SL partition - permissions error

    I have just installed Lion on my 2008 MacPro on a new internal HD and cannot open word/text etc  files on the original Snow Leopard disc.  I get a permissions error.  I can preview the file but not open it.  When I do a get info, I can add my user and give it R&W permissions but still cannot open the file.  I have a third disc with just videos and no system and this is OK.
    For information my upgrade method was as follows:
         Install blank hard disc and fromat it.
         Clone original HD onto new drive using CCC
         Give it a new name
         Boot from the new clone and go through the lion install
         Update the new system to 10.7.4
         Repair disc permissions
    Through this method, I have a duplicate set of files on the Lion partition and these I have no problem opening, it is just those on the SL disc.
    Any ideas as to how to fix this.  I did the duplication as I still want to be able to boot from SL for some old applications and hardware (a film scanner being one).
    Thanks
    Dave

    Softwater,
    Well, I booted back into SL, and as I mentioned, I did have filesharing enabled.  So I added the whole disc as shared and re-booted back into Lion.
    Still no luck. I get exactly the same permissions error and cannot open any files.  This seems crazy that from Lion I cannot open files on other bootable partitions.
    I added myself as a RW permission on the disc via Get info and still cannot see the files. This is very strange behaviour.  According to get info on the disc, I have full read/write access and on the file itself.
    I can see all the files on non-bootable partions.
    Dave

  • I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

    I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

    Canon 1DX support was added to ACR in version 6.7, 7.1.  An updated CS6 should be at level ACR 8.6.  If your ACR is not at level 8.6 try using CS6 menu Help>Updates.  If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
    Adobe - Adobe Camera Raw and DNG Converter : For Windows
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

Maybe you are looking for

  • Session time out in Application server -reg

    hi friends We have Oracle Application server 10g in cluster mode in our organization. We are using Oracle Forms and Reports . But there is one issue. If the user keeps the screen idle for more than 20 min the system gets timed out and requires sdba a

  • Possible to download emails more than once and still display new emails?

    Hi, I have to download emails to my powerbook when i travel, and I download my emails to my powerbook via POP3 server. My office desktop PC, is connected to the company's email server via exchange server. Evertime after i download my emails to my pow

  • MacBook Pro Fluctuating Brightness over HDMI to TV

    Hi every one, after almost 5 years I finally found some clues in order to solve a problem which frustrated me all these years. Every time I plugged my MBP into my Panasonic TV for watching a movie, I got some problem of brightness fluctuation during

  • Update command in MSQL

    Hi Gurus I want to update one row with the m-sql command, but when run the command getting with the error as , can anyone tell me what is the exact command then Server: Msg 208, Level 16, State 1, Line 1 Invalid object name 's903'. UPDATE  WG3.S903 S

  • Illustrator CS 5.1 text sub layer problems

    Some issues happening with text sub layers, any insight into correcting would be great. 1) The show/hide eye icon for the sub layers has no effect - text always shows. Show/hide works for the full layer and for object sub layers, but not for any sub