Cannot open folder call users

I have sophos anti virus and it has told me it has put an infected file in
users/Shared/infected but when I go to look at this folder it is grayed out (users)
finder says that the size is 430 gig but date created is 24 January 1984 08:00
how do I get into this folder? am using 10.9.3 but installed it from time machine
last week due to a unrelated problem

Hi I tryed this and found that system admin is read & write and  everyone is read only I changed all to read write but still have the same problem. I even added a name name(me) with read & write but still the same problem. I have seen that my home folder in finder left hand side has changed from name to name 1 after I installed from time machine

Similar Messages

  • Cannot open folder foldername

    hi,
    a customer of mine has removed a folder in apple mail, in an imap account on a postfix server. something happened during the renaming and somehow some subfolders cannot be opened anymore from apple mail.
    i've tried configuring that user accounts on 2 different computers, but when i open one of these folders, apple mail is showing an empty box. if i mouse over the folder there is a message saying 'unable to open folder foldername'.
    i've checked on the email server and the mails are there. if i open webmail i can display the emails and work with them normally. i was also able to display them with thunderbird and outlook.
    however i've had no luck with apple mail. nothing interesting showing in activity monitor, i don't see anything interesting either in the logs of the mail server.
    any idea on how i can find what is wrong there?
    there are also 100 hundreds of folders under the folder that has been renamed that are still working fine.
    any idea is welcome.
    thanks,
    kind regards,
    Yannick

    Godaddy support came through. I had to enter the ftp address as ftp.domainname/foldername  rather than putting the folder name in the "what folder on the server do you want to store your files in?"

  • Itunes cannot open because another user is using it, please ask them to clo

    I'm on a network with my sister and little brother, but none of us will be using itunes and when I try to get in it, it says that "Itunes cannot open becuase it is currently being used by another user, please have them close out to continue" or something along those lines. Any helpppppppppppp???????????

    For XP, check this out
    http://www.microsoft.com/windowsxp/using/accessibility/fastuserswitching.mspx
    Found this for Vista
    http://windowshelp.microsoft.com/Windows/en-US/Help/94331d67-0f0e-478a-99f0-114e 8451d06b1033.mspx

  • Error: Cannot open itunes multiple users

    I tried to open itunes and got the error message "Cannot open the application "iTunes" because another user has it open." However, there is only 1 itunes user on my computer. I tried uninstalling and reinstalling itunes and it worked once, but now it won't even let me install itunes. It's telling me that itunes is already being used on my computer, which it's not because it's not even installed! Someone please please help!

    I had to open the iTunes .exe file in compatability mode with the windows 08/ windows ME option.  I'm almost sure it's a software problem with the new version of itunes (~10.5)

  • Cannot open folder files in browser window

    Since the last 5 or so firefox update, i notice i am unable to open folder
    files in the browser window on most of the websites i
    have been on. Therefore if i need to upload a file on a website
    when i click the open folder button on the website, i am
    not seeing the folder window open with all my files on my
    computer that i need to select. Instead i have to use another
    browser to do all my uploads, and that breaks my momentum.
    How can this be corrected?

    Hi hardworker2014,
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • I-tunes installed but cannot open in other users using Windows XP

    I-tunes installed and works with no problem in original user AND worked with a subsequent second user with a second I-Pod. After downloading version 7.5, I-tunes will not open in any other user in Windows XP including the 2nd user. Opening I-Tunes from the Start menu produced an installation / configuration attempt when trying to open in other users with nothing opening at the end. Same with Quicktime. Using the desktop shortcut produces the same installation/ configuration attempt resulting in a "problem with shortcut / fatal error during installation" message. All users are Administrators.
    I tried un-installing / re-installing, installing Quicktime alone, setting up a new user (same thing happens), tried MSCONFIG for any conflicts.
    Any ideas to open I-tunes in other user desktops?

    I have the same problem

  • Cannot execute 70SP04 MUP on MSA. Keeps giving error cannot open folder

    Dear Mobile Heroes,
    I cannot execute an (70SP04) MUP on MSA. When the MUP runs, it keeps failing saying that it cannot write to location c:\program files\sap\mobile\app.net\Layout......
    In the Client Upgrade log, "the error occurred in module ClientUpgrade.shared.ccompressor
    <can't open for writing>
    I have checked this folder, and granted full read/write/creation/deletion premissions to all users and cascaded these properties to all subordinate folders - no change. Same error. I even tried granting full rights to all folders inc and below C:\program files\sap\mobile       Still same error - HELP?!
    Richard

    Hello RIchard,
    In case you're upgrading to 70sp04 and executing an MUP for that matter, I'd like to know if
    you've already run the Hotfix.mup that comes bundled with 70sp04(Please see the 70sp04 Upgrade guide).
    In case you've already done so, can you try removing the ReadOnly flag of the folder -
    c:\program files\sap\mobile\app.net\MSA\Layout and then try running the MUP again.
    Thanks,
    Rohit

  • Microsoft Word cannot open on specific user account.

    Hello,
    Everytime I open Microsoft Word (Office 2011) on my original user account, I get this message:
    I went to Microsoft's support site first. After finding various methods here, I found that the second method actually worked for me. That method was to make a "test" user account, and try to open Word there. Word had an update available and I updated both accounts with it. The "test" account actually opens up Word with no problems, whereas my original user account does not. Apple Support didn't help, in fact they directed me back to Microsoft because it's a third party software developer, despite it being an Apple/Macbook user account problem. I was wondering if anyone knew how to fix this, or if I'm stuck transferring all my files over to my test account one by one?
    Thanks.

    Maxie1111,
    Just a shot here,if you have done all the steps you have provided in the link,  in your affected acct, try going to Applications, Microsoft Office, Word and highlight it. Then press COMMAND I or right (control) click on it, this will bring uo the info pane, at the bottom under "sharing and permisssions make sure that system, and the rest of the accts have read write access, if not try unlocking the padlock (at the bottom with your admin pswd) and changing the status, see if this helps.
    ATB

  • Dynamic Send Port : The FILE send adapter cannot open file C:\Temp for writing. Details: Access is denied.

    Hi All,
    We have requirement of using ESB toolkit and transforming incoming xml file to edi format. So, we are using ItinerarySelectReceiveXML pipeline for receiving the input from the input location and "EDISend" pipeline for transforming it into EDI and
    send it to destination.
    Now, the receive pipeline is picking up the file, but it is not processed and sent to destination.
    And, we are getting an Access Denied error from Dynamic send port.
    Error Description : 
    The FILE send adapter cannot open file C:\Users\Public\Temp for writing.
     Details: Access is denied.
    Any Immediate solutions/suggestions are appreciated...Thanks.
    Anand

    The difference between dynamic and static port would be send handler. For dynamic port, default send handler will be used and for static port the one configured on the port will be used, could you validate this configuration.
    Also sometimes, administrative privileges are not "real" administrative privileges and company admins will have limited permissions on C Drive folders. Try writing to some other folder to isolate the issue.
    Regards, Ajeet Kumar MCTS Biztalk Server

  • I used Time Machine to recover my Pictures folder. This created a folder called Pictures (original) but I cannot open it.  There is a do not enter roadsign, red disk and white bar on it.  How can I see the contents?

    I used Time Machine to recover my Pictures folder. This created a folder called Pictures (original) but I cannot open it.  There is a do not enter roadsign, red disk and white bar on it.  How can I see the contents?

    Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    chmod -R -N ~
    The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
    sudo !!
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • Why the remote user cannot open any folds?

    Why the remote user cannot open any folds?
    I create a user user8 and already grant the user the role connect, OLTP-user, and resource. I also assign this user unlimited space in the user8 tablespace. But after connection, the user8 cannot open any folds and the connection is terninated automaticlly.

    Why the remote user cannot open any folds?I don't know what you have.
    I don't know what you do.
    I don't know what you see.
    It is really, Really, REALLY difficult to fix a problem that can not be seen.
    use COPY & PASTE so we can see what you do & how Oracle responds.
    do as below so we can know complete Oracle version & OS name.
    Post via COPY & PASTE complete results of
    SELECT * from v$version;

  • TS3276 email was hacked, can open email on yahoo (after changing passwords) but cannot open mail on my computer, cannot even access mail because it will not accept my user name or password and I am unable to reset my account

    email was hijacked and spam/virus link sent out to all of my contacts on wed at 4:21AM..... with the Subject as Rep: My Name or My email address and a link to a web page discussing making money working at home.  Could not get into any of my mail, on the web or on Mail on my mac.  After a phone call to automated support through Yahoo through ATT, I was given a temporary password and was able to reset my Yahoo password and get email on the internet.  I still cannot open my Mail Account on either my iMac or MacBook Pro.  I cannot get into Mail, period.  My sign in keeps popping up and it keeps telling me that my user name or password is incorrect.  I tried my old password, the temporary password and the new password.  Nothing is working,  I cannot receive or send anything in Mail.  Mail is Frozen.  If I want my email, I must go to the web and sign into Yahoo Mail.
    Help!

    When you were entering your new password in mac mail for your Yahoo account, you didn't perchance change the user name from [email protected] to just name without the @att.net? I only ask because I've done that, and att.yahoo mail requires a fully qualified [email protected] for access.
    In mail, you might click on window on the menu bar, then connection doctor. On the account with the red dot next to it, it will tell you why it can't connect, and if you click on it, you'll be taken to where you can fix it. 

  • Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance

    Windows Server 2012 R1 with Exchange 2013 SP1
    Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain. 
    When I try to configure Outlook profile for the user, I manually enter exchange server name and user name. 
    Check User button underlines server name and user name and profile gets created successfully.
    Once I try to open outlook for the user I get
    Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance
    If I search the content of the log files under
    X:\Program Files\Microsoft\Exchange Server\V15\Logging\RPC Client Access
    I can’t find any records indicating a connection attempt from the client’s IP or references to the version of the outlook used, however I can see a 3 way handshake followed by a 4 RCP packets and then 4 nspi bind requests and responses when outlook opens
    up and then connection is torn down.

    Windows Server 2012 R1 with Exchange 2013 SP1
    Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain. 
    Hi,
    That version of Outlook 2010 (14.0.4760.1000) is not supported with Exchange 2013 and will not be able to connect. It need to be on at least SP1 +
    Outlook 2010 November 2012 update (14.0.6126.5000)
    See: Exchange 2013 System Requirements -
    Client Support
    Martina Miskovic

  • Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'

    I want to grant permissions to all domain users to view reports on our Report Server. Domain users are able to access our Report Server URL and folder, but when they click on a report item they get an error message: 
    "Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'"
    I'm using windows authentication and configured the local service account in SSReportS Config Manager as the credentials to connect to the Report Server DB. 
    Can someone please help how I should properly do this step by step to give all domain users permissions to view a report in SSRS?
    Thanks much! - Rookie DBA

    Hi IWAR,
    The error message "Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'" means the user 'USER LOGON' does not have permissions to access the "ReportServer" database.
    To fix this issue, please verify that the user has a valid database user login. For more details, please refer to the following steps.
    In SQL Server Management Studio, open Object Explorer and expand the Databases folder.
    Expand the database in which to create the new database user.
    Right-click the Security folder, point to New, and then click User.
    On the General page, enter a name for the new user in the User name box.
    In the Login name box, enter the name of a SQL Server login to map to the database user.
    Click OK.
    Reference:
    http://technet.microsoft.com/en-us/library/ms156468(v=sql.105).aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Cannot open project: the folder for this project cannot be found cs4

    I am using Encore CS4  and I get the error "cannot open project: the folder for this project cannot be found"
    Having searched the forums I can not find a solution for when the project folder has been deleted.
    Can someone tell me the solution to this issue.

    If you deleted the Encore directory, you cannot fix this.  You'll have to start over.
    Encore creates this folder structure:
    Root or some other Folder
    MyProject.ncor (the Encore project FILE)
    MyProject (the Encore project directory)
    Other Folders for the Encore project (e.g. Cache, Sources)
    You can get the "the folder for this project cannot be found"  in various ways.
    There have been two recent threads in which the user, by accident or on purpose, changed the folder location or name.  You can fix this by renaming the folder correctly or moving it back (or moving the Encore project file to the correct relative position).
    Folder was renamed.  If you name the folder "MyProjectX" Instead of "MyProject," the project file "MyProject.ncor" can't find it.
    Encore project file was moved - or Encore directories were moved.  If you move "MyProject.ncor" to some other directory or drive (including inside the folder "MyProject"), it can't find the directory - it is looking one directory level below where the project file is located.
    If you delete the Encore project directories, the stuff that Encore uses that projects menus, motion, etc, are gone.  While many of its instructions are inside the project file itself, many are not.  Some of the deleted material might be recreated (e.g. trying to fake Encore into accepting a copy of a menu), but most cannot.

Maybe you are looking for