Cannot open imovie in Quicktime from 10.1.x i Movie

I made an imovie project on a 10.1.x mac, saved it to my flash drive and then went home to Tiger 10.4.11, Quicktime (7.4). I couldn't open the .mov file I created on the other Mac. It said it was searching for FadeIn 01 and Gravity 01 files (two affects I put into my movie) but could not find them and would not open the file. Is there anyway to get this .mov file to open?

You saved a "reference" file instead of "self contained".
When you moved it off the host drive you broke the reference (files not found).

Similar Messages

Cannot open nor remove quicktime from my computer

Cannot open nor remove Quicktime from my computer.
Quicxktime is installed but when I try to open a mp3 file using quicktime my Windows installer tells me that Quicktime cannot be found.

Windows installer tells me that Quicktime cannot be found.
Is that the QuickTime.msi that can't be found, robert?
If so, unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing QuickTime again. Does the install go through properly? If so, does your QuickTime Player launch now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Cannot open iMovie 10.0.6 with Yosemite upgrade on 2014 Macbook Air

I updated OS X to Yosemite and noticed I cannot open iMovie. Updated both iPhoto & iMovie and it still is not working giving me error message, "You can’t use this version of the application “iMovie” with this version of OS X." " You have iMovie 10.0", even though I just updated to 10.0.6
I restarted few times, updated both iPhoto and iMovie . . . still not opening from dock.
This is running on MacBook Air 2013 w/ 2Ghz i7 w/ 8G memory...
OK, now what?
thank you!!

I just tried to open iMovie for the first time since upgrading to Yosemite and it tries to load all my projects and then crashes out with a error. It will not open at all.

I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one?

I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one? I try to install but get the error" download error". As far as i know I'm using Adobe Java 7. None of my CS5 suite works anymore............and i really dont want to upgrade to a monthly cloud service fee as i hate this policy with a passion.

This goes for Dreamweaver CC on Mavericks!!!!! THANK YOU!
I couldn't launch Dreamweaver CC. An error told me to install "java se 6 runtime". But when I clicked OK I got another error telling me there is a network problem! I found this forum post on CS6 products, so I tried the download link, installed java 6 and presto, it worked! Thanks!

"Object Picker cannot open because no locations from which to choose objects can be found"

Hi,
When I try in AD management console in the domain controller to add a new group for a user I get the following error:
"Object Picker cannot open because no locations from which to choose objects can be found" error message when you try to select objects from an Active Directory domain in Windows 2000
Our domain controller is a W2000 cluster (two W2000 advanced server machines) and this happens in one of the nodes of the controller while in the other node it Works well (the difference between them is where it fails, has the resources: print,
file sharing and quorum services). Both nodes of the controller have the remote registry service disabled and in the node where it fails when you start this service it works well but I don`t think this is the reason because in the other node with remote registry
service disabled it works. Solutions from the following support articles don`t work:
kb 263231
kb 284914
I have checked that the situation is independent of the domain administrator who tries to add the group to the user.
Can anybody help me? Which is the reason of this different behaviour from one cluster node to another ?
Thanks.

Hi Milos,
Thanks for your answer but I think this is not the case because the problem is not with NTFS and we don' have these problems:
Users or groups that have Full Control access cannot delegate permissions.
Users who have Full Control access cannot make permission changes on a DFS share.
If you give the non-privileged user the right to log on locally and you log on locally to the file server where the error message occurs, you can successfully edit the ACL.
It only happens with the AD management console. Now, for us it is not posible to upgrade the system.

Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?

Why I cannot open raw files (NEF) from camera Nikon D3200 through Adobe Bridge and/or Photoshop ?

Thanks for the tip. It worked out perfectly.
De: ssprengel [email protected]
Enviada em: terça-feira, 14 de janeiro de 2014 19:14
Para: Aecio Paes Leme
Assunto: Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?
Re: Why I cannot open camera raw files from camera Nikon 3200 through Adobe Bridge and/or Photoshop?
created by ssprengel <http://forums.adobe.com/people/ssprengel> in Adobe Camera Raw - View the full discussion <http://forums.adobe.com/message/6012775#6012775

Cannot open camera RAW images from Sony DSC-RX100M3 camera. Working on a Mac in Photoshop CS5 and have camera raw 6.7.

Cannot open camera RAW images from Sony DSC-RX100M3 camera. Working on a Mac with Photoshop CS5 and Camera Raw 6.7?

Bruce,
When I made the transition to digital some 8 years ago, I had tremendous help from a number of well documented websites, among which:
http://www.luminous-landscape.com
I think a lot of stuff there to get you seriously going. Another one is:
http://www.computer-darkroom.com
I sold all my film based stuff, except a Nikon F3 and a handful of lenses and a Paterson developing tank.
The Nikon suspiciously smells like foam mirror damping strips chemically decaying.
I sold my enlarger over the internet. The word "enlarger" caused me to be on SpamCops blacklist for a while.
I'm in this since the seventies, and I think you'll be as amazed as I was at the possibilities and control you have. And no more bags with $300 worth of film that's consumed in one shoot.
Jump in both feet! you won't be sorry. And these forums are the best help you can get.
Good luck,
Rob

Cannot open file in QuickTime Pro

I recently installed iTunes and QuickTime Pro on my computer. I would like to put some DVD's that I own onto my iPod, but when I put a movie in the DVD drive, I cannot open it through QuickTime Pro. I tried uninstalling both, restarting the computer, re-installing both, restarting, and still I cannot even play a movie through QuickTime Pro.

QuickTime pro doesn't display the MPEG-2 file format (DVD's) without third party software help. Apple sells the MPEG-2 Playback Component for $20 but it does not allow playback of commercial (Hollywood CSS encrypted) DVD's.
Visit the iPod discussions pages for more answers.

Cannot open nikon raw files from my 3200 in elements 8

i cannot open nikon raw files from my 3200 in elements 8

http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
You would need PSE11 since the 3200 requires ACR version 7.1
Only PSE11 can have 7.1, so to be able to use your raw files with PSE9 you should download the free Adobe DNGconverter which can batch convert a whole folder of raw files into the Adobe raw DNG format which your PSE8 can open.
http://helpx.adobe.com/x-productkb/multi/troubleshoot-camera-raw-photoshop-photoshop.html
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5486
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5518

Unable to view SAP Help files --Cannot Open Frameset.htm Files from 'help.s

Unable to view SAP Help files --Cannot Open Frameset.htm Files from 'help.sap.com'
Open Internet Explorer
Types in http://help.sap.com/
Click on mySAP ERP
Click on English
The webpage goes to
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
It shows the status done but what I see is just a blank page
I tried going to different areas of SAP Help files but no success
I cannot even open Help on Help http://help.sap.com/saphelp_erp2004/helpdata/en/3f/a42938955df162e10000009b38f842/frameset.htm
None of the other users have this issue

Hi
I am able to open your links. I think there is some problem in your internet explorer. please check
regards
Srinivas

TS1702 I cannot open iMovie and do not want to reinstall the ap as I have five finished movies within it and would therefore lose about ten hours of work putting them together. The app crashes every time I try to open it. Any ideas?

I Cannot open iMovie ad the app keeps crashing. I don't want to reinstall as I will loose all of the work (I have spent about ten hours setting up five movies).

Try double-clicking the Home button to bring up the recent Apps tray. Touch and hold on the iMovie icon til it shakes and a "-" appears the the upper left corner. Touch the "-" to remove iMovie.
See if it opens.
If not try restarting and/or resetting your iPad:
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

I cannot open a photo library from an external hard rive I get a message that says: You have made changes to your iPhoto library using a newer version of iPhoto. How do I access this library?

I cannot open a photo library from an external hard rive I get a message that says: You have made changes to your iPhoto library using a newer version of iPhoto. How do I access this library?

and
and have you opened this library with any other computer?
LN

Cannot open .avi files imported from Nikon d90 in Adobe Premiere 6.0.

Cannot open .avi files imported from Nikon d90 in Adobe Premiere 6.0.
When I try to open the file I get the following error message:
"cannot open that file
the file uses an unsupported file compression format"
I really need urgent help with this so if you know a soloution, please post it!

I don't do mjpeg so you will have to search the forum for advice
But... having a playback codec installed does not ALWAYS mean the codec will work for Premiere editing
After you search the forum and find the (I think free) codec vendors, you will need to install fresh so Premiere will "see" the codec for editing
Or, Google
convert mjpeg avi
To convert to DV AVI type 2 with 48khz sound so the files will "natively" edit in Premiere
My GUESS (you didn't say) is the d90 is a STILL camera that has a video function, not a true camcorder
If you plan to do much video work, you need a tape-based DV camcorder so you use Firewire to do a digital transfer as a "real" AVI that Premiere may edit without conversion or extra software
For a Firewire DV Camera - look at Panasonic PV-GS320 or GS500 (Note that I have not used either, but they have good reviews)
http://reviews.cnet.com/Panasonic_PV_GS320/4505-6500_7-32330317.html
http://reviews.cnet.com/digital-camcorders/panasonic-pv-gs500/4505-6500_7-31660646.html

HT4796 I cannot open any files transferred from the PC to my MAC as I am "not authorized". How can I correct this?

I cannot open any files transferred from my Windows PC to my Mac as I am "not authorized". How can I correct this?

Select the folderr containing all of those files, CMD+I, click on the lock, enter your admin password, add yourself with read & write, and click on the action button and select apply to enclosed items. That should do the trick. BTW, I don't have a PC, so i've not transfered any such files to my machine.

Opening iMovie '08 Projects from Different Installation

Hi -
Question 1:
I have 10 iMovie '08 projects saved on a USB HD from a prior installation of iMovie '08. I cannot open these projects or, make iMovie '08 "see" them at all. I can right-click the files and view the contents where I see the different size movies ('Large', 'Mobile', etc.) that I created. How do I access these project files in my new iMovie '08 installation?
Question 2:
I want to configure iMovie '08 so that the default location for ALL actions is an external HD volume. I do not want any files associated with movie production to ever be saved in the ~/Movies directory of my home directory. Is this even possible? I tried the symlink trick noted elsewhere in this forum, but it did not work. (Actually, the symlink process worked fine but, iMovie '08 still saves projects in ~/Movies.) My editing need are technically simple but, I have a lot of files and want to tightly manage the results. Any ideas?
Thanks in advance.

Hello,
I had the same problem...I created a movie on my laptop while away for Christmas and tried to transfer it to my iMac when I returned.
What worked for me was to copy the movie into the iMovie 08's Project Library folder - it apparently it looks there for movies when launching. I found the folder by opening a finder window and then searching for a movie that was already in the iMovie project library. My folder is located in my Movie folder and is called "iMovie Projects".
I hope this helps!
I don't have an answer to your second question. Sorry

Cannot open imovie in Quicktime from 10.1.x i Movie

Similar Messages

Maybe you are looking for