Cannot open IPS via IDM

Issue with IDM access to IPS module
To anyone that can assist!
I have a situation where I can only connect to via IPS module using the ASA console and opening a session to the module itself. I cannot open an IDM session at all.
This device is acting as a secondary device and the primary is functioning correctly.
The problem has occurred after inputting the following configuration in via a sevice account to disable weak ciphers.
su -
cd /usr/cids/idsRoot/etc
cp tls.conf tls.conf.orig
sed '/TLS_RSA_WITH_DES_CBC_SHA/d' tls.conf.orig > tls.conf
/etc/init.d/cids reboot
The IPS was stuck in INIT for two hours and caused the ASA isssues with failover so the device was phycially powered off. After being restored, I can log in via the console, but cannot browse to it or monitor the module via IME.
Does anyone have an idea on how to resolve this issue?
Many thanks
James Cotterill

Hi CSCO12625692,
Thanks for replying, unfortunately that did not resolve anything.
I cannot browse to the page either. It is almost as if the web service has now stopped completely.
Any ideas?
thanks
James

Similar Messages

Cannot open documents via doubleclick. must navigate thru folders

I am helping an elderly gentleman. Suddenly he finds that doubleclicking on an Appleworks document does not open it. He has to navigate through the Finder-which is slower and confuses him.
IF he reboots his Mac (iMac 17") everything again is ok and he can simply double click..
But then the problem returns and he cannot open the documents again unless he reboots.
Not sure what triggers the problem-it is not a corruption as the problem clears when reboot. Unless some sort of temporary cache or permission is involved?
Slight suspicion this is related to updated Fax software but not sure. (PageSender)
Has anyone had similar problem? Any known application conflicts?
Responses welcome ... and Happy Holidays

A couple of things might help. Whenever you do an update, & installing software can fall in this category, it's a good idea to do two maintenance tasks, one for the system (Repair Permissions) and one for AppleWorks (delete preferences). (Thanks to Barry for this way to format this very common answer.)
To Repair permissions in 10.4.x, launch Disk Utility, found in the Utilities folder in your Applications folder, click on First Aid, then on Repair Permissions.
To delete AppleWorks’ preference files, go to HD > Users > Library > Preferences. Find and delete the file com.apple.appleworks.plist. Find and open the folder AppleWorks in this Preferences folder, then delete all of the enclosed files (with the exception of the Button Bar Preferences if you have customized the Button Bars). AppleWorks will recreate the preference files as it needs them.
Partly because AppleWorks 6 is actually an OS 9 application carbonized to run in OS X, there can be some confusion between AppleWorks files & OS X because pre-OS X systems don't use file extensions.
Sometimes, merely "telling" OS X that AppleWorks is to open these files will work. Click a known AppleWorks document in the Finder to highlight it & choose Get Info from the File menu. In the Get Info box, click the triangle next to "Open With." Click on this drop-down menu & choose AppleWorks 6. If AppleWorks 6 is not a choice, choose "Other" & navigate to the AppleWorks 6 application. Now click the "Change" button under the text that asks if you want to open all documents like this with AppleWorks 6.
If that doesn't work consistently, you can add the .cwk extension to the file names. This user tip explains how you can add the extension to whole folders of files at a time.

I cannot open files via firefox on sharepoint 2010, i can however open the files on IE.

I cannot open files such as word, excel, pdfs on sharepoint when i use Sharepoint. I can open them ok on IE.
i have updated the firefox to the latest version 8.
Still no joy.
Is there a add on i need to install?

Looks like the site might make use of Adobe Flash. At this time we don't have support for the Android Adobe Flash plugin. We are working on getting Flash to work but it has been a difficult path as the Android Flash plugin is quite different from the desktop version.

SharePoint cannot open files via IE 11, while chrome works well.

We are using IE 11, and cannot open word or excel files in SharePoint library by Office 2013. The OpenDocuments class add-on is enabled. And only one computer has this issue.
Windows 7
Only Office 2013 - version 15.4631.1000
Internet Explorer - IE11.0.9600.17207 update 11.0.10 (IE 32-bit)
The error messages is: "To open this document, your computer must be running a supported version of Microsoft Office application and a browser that supports opening files directly from the Office Online"
Thanks in advance!

Hi,
This issue occurs because the SharePoint OpenDocuments Class (OWSSUPP.DLL) Internet Explorer Add-in is the wrong version due to having multiple versions of Office on the same
workstation. To check the version open Internet Explorer when the error is showing, go to Tools, Manage Add-ons. In Manage Add-ons click on SharePoint OpenDocuments Class and notice the version is any version other than 14.0.
The details can be found and solved at:
http://support.microsoft.com/kb/2540922
Meanwhile try to reset the Internet Explorer, by resetting Internet Explorer settings, you return it to the state it was in when it was first installed on your computer. This is useful for troubleshooting problems that might be caused by settings that
were changed after installation.
a. Close all Internet Explorer and Explorer windows that are currently open.
b. Start Internet Explorer.
c. On the Tools menu, tap or click Internet options. If you don't see the Tools menu, press Alt.
d. In the Internet Options window, tap or click the Advanced tab.
e. Tap or click Reset
Details can be found at:
http://support.microsoft.com/kb/923737
Regards
Wade Liu
TechNet Community Support

Cannot open .pdfs via Outlook or Adobe Reader, can't open Adobe Reader, can't uninstall it!

We have a new office desktop that will not open .pdfs or open Adobe Reader. The version on the computer is 9.5.2. When I try to install updates or install Adobe XI, the installation process stops before completion because it says Adobe 9.5 is currently being open. But we can't open Adobe 9.5, and task manager does not even show the program as being open.
I have tried uninstalling the program, but have been unable for the same reason.

You can try using this tool to remove all traces of previous version(s) of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you may download the offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Cannot open pdf via internet

I tried the Repair Adobe Installation via the Help menu. I get the following error message "Uninstallation of the patch package is not supported". How can I fix this?

Hello,
I forgot to test this solution but i've tried it this morning without success.

I have been creating a document in numbers on my iPhone and synced to iCloud. Now I cannot open it, and when trying to download via browser I get an error message. How can I recover this document?

Dear all,
I have created a document on my iPhone, and stored it on iCloud. I have updated the document both on my iPhone and on my iPad. Now, I cannot open the document on my iPhone anymore, even a reset of the phone did not help. Via iPad I also cannot open the file, and when I try to download it to my PC via icloud.com I get an error message.I suspect that the file has become corrupt as I have updated it on the iPhone while I did not have network connectivity.
I have two questions:
1.) Is it possible to recover an earlier version of the file?
2.) What can I do to prevent this from happening again in the future?
3.) Does the iPhone sync changes to iCloud in the background or does the application need to be active?
Thank you,
Niftan

Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry.

Is there a way to open a zip file received via email on the iPad? I tried and a message popped up saying mail cannot open the attachment.

Is there a way to open a zip file received via email on the iPad? I tried and a message popped up saying mail cannot open the attachment.

You need a third party app. Take a look at some of these on this Google page.
Open zip files on iPad

I cannot open PDF filkes sent via email. I used too. nHow do I fix.

Cannot open PDF files sent via email. The open via Word in encripted jinerish. This has not happend until now.
Ciro

I had the same problem. My version of RoboHelp is pretty old (x5) and the problem was with pdfs made up in version 9. Some pdfs would open and some would not. It depended on the version used to make the pdf. Got error messages and corrupted file messages.
I solved the problem by using the full version of Acrobat and using the pdf Optimizer to make compatible with version 5( just to make sure).
Another option is to "print" to the pdf printer when the file is open.
Both then can be imported into RoboHelp without a problem
Hope this helps. It ruined many days at work for me while I tried to figure out what on earth I was going to do.
Holly

Cannot open HFM application via Workspace

Hi
At times users cannot open HFM application via WorkSpace.When they open an application they can see the progress bar and the application does not come back(HUNG).
Looking into the logs at the time of incidents we find the following from the logs
An unknown error has occurred in the HsvDSSystemInfo object.
System Message Details
Error Reference Number: {16E56999-6F2A-4905-99D5-B65C14A14F81} Num: -2147210624; User: Type: 0; DTime: 21/09/2009 12:39:54 PM; Svr: AU02UAP093QAN32; Application:
File Error List
File: CHsvDSSystemInfo.cpp Version: 9.3.1.0.1502 Line: 1981 Error: (-2147210624)(0x80042A80)(An unknown error has occurred in the HsvDSSystemInfo object.)
XML Error String
+<?xml version="1.0" ?>+
+<EStr>+
+<Ref>{16E56999-6F2A-4905-99D5-B65C14A14F81}</Ref>+
+<User></User>+
+<DBUpdate>157330616</DBUpdate>+
+<ESec>+
+<Num HEX=0x80042A80>-2147210624</Num>+
+<Description Src=HFM>An unknown error has occurred in the HsvDSSystemInfo object.</Description>+
+<Type>1</Type>+
+<DTime>21/09/2009 12:39:54 PM</DTime>+
+<Svr>AU02UAP093QAN32</Svr>+
+<File>CHsvDSSystemInfo.cpp</File>+
+<Line>1981</Line>+
+<Ver>9.3.1.0.1502</Ver>+
-<DStr>ORA-01400: cannot insert NULL into ("HFMOWNER"."QANTASHFM_USERPARAMS"."PARAMETERKEY")</DStr>-
+<ExErr></ExErr>+
+<PSec>+
+<Param>INSERT INTO QANTASHFM_USERPARAMS (Username,EntryIDX,ParameterKey,BLOBData) values(N'admin@Native Directory',1,N'','19')</Param>+
+</PSec>+
+</ESec>+
+</EStr>+
Is this a known issue? What are the steps to resolve this issue?
Thanks in Advance

Hi Manoj,
Please check the following points
Is shared service is running
Is HFM application thick client working
Is application been creataed, if yes, is that application registered with shared services.
Check Workspace services is running or not, and Hyperion Financial Managment services is running or not.
Make sure that all services are running before you open workspace.
Let me know what your system gives messages.
Regards
Raj - Learner

I have loaded and reloaded Reader 9. I cannot open a pfd document.      I can save it to desk top then open it via a drop down box that has a "open with Adobe Reader 9". How can I avoid having to do this?

I have loaded and reloaded Reader 9. I cannot open a pfd document.      I can save it to desk top then open it via a drop down box that has a "open with Adobe Reader 9". How can I avoid having to do this?

Hello Michael,
Thank you for your response. My operating system is XP. When I try to open a pfd document I just get a series of letters and symbols in a dialog box. The top of the box says "select the encoding that makes your document readable". I can choose Windows, MS-Dos, or other (there is a long list to choose from). None seem to make a difference. If I save the document to my desk top I can right click on it and choose an option "Open with AdobeReader 9" and it opens fine.
Thank you,
Rick
New Edge Technologies
6525 Peninsula Dr.
Traverse City, MI 49686
231.620.2521
231.941.1284 (fax)
[email protected]
Date: Wed, 8 Jul 2009 06:22:51 -0600
From: [email protected]
To: [email protected]
Subject: I have loaded and reloaded Reader 9. I cannot open a pfd document.      I can save it to desk top then open it via a drop down box that has a "open with Adobe Reader 9". How can I avoid having to do this?
Hello:
What operating system does your computer use? What happens when you attempt to open a PDF document rather than saving it first? Please include any/all error messages. Also, have you tried opening documents from other locations or just one in particular?
Thanks,
     Michael
>

I cannot open pdf's via any browser links on my macbook running leopard 10.5.8.

Hi, I cannot open to PDF's via any browser links on my macbook (1 yr old) running leopard 10.5.8. I have latest adobe reader installed but when I click a link to open a pdf from various sites no matter what browser it just opens a blank tab. Any thoughts?

Here, it has to be there, but it may be minimised. You just have to press the grey arrow. I took a before/after screenshot for you.
Before:
After:

Hello I cannot open Lightroom that I purchased via Creative Cloud

Hello I cannot open Lightroom that I purchased via Creative Cloud

What is happening when you try?
Did you have the non-CC version of LR 5 installed as a trial, previously?

Something software related prevented me from being able to boot up my iMAC. The remedy was to wipe the computer of all soft wear and re-inatall everything via my time capsule. All good there.. but now I cannot open Ai and a box stating"Licensing for this

Something software related prevented me from being able to boot up my iMAC. The remedy was to wipe the computer of all soft wear and re-inatall everything via my time capsule. All good there.. but now I cannot open Ai and a box stating"Licensing for this product has stopped working" and to reference error code 150:30. How do I get my Ai to open?

Run the cleaner tool and reinstall it properly.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium

I cannot open a tab or new window to the right of an existing tab. I've followed the instructions to update via FAQ but still not working. Help!

I cannot open a tab to the right of an existing tab. I've followed the directions provided under normal FAQ. This feature just recently was wiped from my PC, and I am not certain how.

The Ask Toolbar is causing that in the Firefox 3.6.13+ versions. Uninstall that extension.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Cannot open IPS via IDM

Similar Messages

Maybe you are looking for