Cannot open iSync for one user

Hello ... After upgrade to 10.5.6 I can no longer open iSync for user A. For all other users iSync still opens and shows that it is the new version from 10.5.6. So the update worked, but iSync doesn't start at all for one user. I suspect that this user uses a device which is no longer supported in 10.5.6. I tried to remove the device from the list of Bluetooth devices and added it again. Didn't work.
I have followed the Apple Hint http://support.apple.com/kb/TS1627 for resetting in terminal the SyncServices but it hasn't changed anything.
I reset all data via .me for this user. Didn't work.
Any other idea? I would like to remove this phone from the list of iSync devices but I don't know how because I cannot open iSync.
Best regards
Valentin.

Yep. That's what I did and it worked but afterwards I had to clean-up: Repairing permissions and then I reinstalled the Combo for being sure.
In hindsight, I believe it must have been related to a permissions issues - something in the 10.5.6 installation process must have changed the permissions. I did repaired the permissions before the Combo installation but not afterwards so it's difficult to prove it now. But moving the package to my desktop and then back did change the permissions to read&write for my user A.
Thanks.
Valentin.

Similar Messages

How to open multiple sessions for one user?

Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
select col1 from my_table where row_id = 1
-- shows result is 1
update my_table set col1 = 0 where row_id = 1
select col1 from my_table where row_id = 1
-- shows result is 0and then enter into the second worksheet:
select col1 from my_table where row_id = 1
-- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
Re: Help with Procedure
Edited by: tem on Apr 18, 2012 6:44 AM

Thanks Jim,
Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
I don't see an option for "Worksheet".
UPDATE:
OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
Edited by: tem on Apr 18, 2012 8:00 AM

One application won't open for one user

We are doing a rollout of Macbook Pros to a group of people. We have used migration assistant for 20 computers. One application will not open for one user on each of the computers. The applicaiton will open for users that are added, but not the admin user that the application was originally installed. We have tried uninstalling and reinstalling the application with the same results. The one user can not log in. The permissions look right for all files.

How about clarifying some things for me? Does each machine have a different admin user? What user installed the application that won't open (you say there is only one?) How many users on each machine - one or many? How many admin users are there? How many users are Standard or Managed users? What user "can not log in?" Is this on one machine or all machines? Which is the application that won't open, where is it installed, what are the permissions for the application, what are the permissions for the folder in which it's installed?
Are these computers on a network or operating standalone or does each person in the group have their own separate machine?
From where did you migrate for these 20 computers and why did you use Migration Assistant? MA is not the correct tool for doing a multi-system configuration. This is usually done using a net-based installation from a machine running OS X Server or from an XServe or by creating a standard system DVD and installing via ASR.

Tacacs authentication fails for one user account for only one switch

Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
              Socket opens:        157
             Socket closes:        156
             Socket aborts:        303
             Socket errors:          1
           Socket Timeouts:          2
   Failed Connect Attempts:          0
        Total Packets Sent:       1703
        Total Packets Recv:       1243
          Expected Replies:          0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
Prasey

Hi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad

JSP page doesnt load for one user on machine1, but does 4 all on same box

Hi,
I have a Citrix application on a box to enable many users to connect remotely to different applications on differnt boxes using the browser on this box. Just like terminal Services or remote desktop
I tested 15 users and all of them are able to login to the machine and able to open a jsp page of an application located on a differernt box using the browser on this box.
But for one user I am facing an issue. For this user, I am not able to get the page and instead I only see a message as "page loading" and nothing more than that, Its getting stuck there itself with no progress.
Please help me,
Thanks a lot in advance,
Srinivas.

Hi,
I suspect there is something missing as far as the JRE for this guy is concerned. Sothing to do with permissions. java policy, security etc.
I am not sure if that helps. I am not in the development of the application, and will check with those guys. I only neeed to provode support on this machine and be able to give access to that application which is on Linux. The browser is in Windows machine,
Thanks,
Srinivas.

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

ODBC--connection to 'SQL Serverservername' failed for one user but not another

In Win7, we're linking tables in an MS Access 2010 db to tables in a SQL Server 2008 R2 db. The driver user by the File dsn is SQL Server version 6.01.7601.17514 & we're using SQL Server Authentication.
For some reason, one user gets the msg "ODBC--connection to 'SQL Serverservername' failed" before they're even asked for a password, but for other users, the prompt comes up and when they uncheck the Windows Auth box, they enter their password
and connect successfully to the SQL Server db. Both users have db_datareader access to the SQL Server db.
I had the user that gets the error msg log onto my PC and they get the same error (yet it works for me.)
This user was, however, able to successfully relink the tables, but then when we closed the access db and opened it again, the user got the "ODBC--connection..." error agin.
I'm stumped as to why this is happening for one user.

Hello Knellen,
Please help to collect more log information regarding this issue, such as windows event log, SQL Sever log information. They are helpful for us to troubleshoot it.
Regards,
Elvis Long
TechNet Community Support

Safari works for one user but not another on same computer

MacBook with multiple user accounts. Safari (and Firefox) work fine for one user but are unable to open web pages when the other user is logged in. The error in Safar is "Safari can't open the page "http://xxxxxxxxx/" because it could not connect to the server "/xxxxxxx/" . DNS is working for this user. I am able to ping any number of sites from Terminal. Network Preference pane is configured to not require any proxy. This is a case of it was working but now it's not.
Can anybody help with this? I know I can fix this by simply creating another user and transfering the affected user's data to the new account but I would rather not. TIA

HI Bob,
You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
208.67.222.222
208.67.220.220
See if that helps.
Carolyn

User Defined Fields greyed out for one user

Hi Experts,
One of our users is a Super User but on the Business Partner Master Data screen, the User Defined Fields are greyed out.
This is user specific as the issue is happening for the same user on 2 seperate PCs.
Other users can update these UDFs - any suggestions?
Thanks
Greig

Hi
take a look at this SAP Note :
Cannot access settings for the user defined fields
Symptom
Cannot access settings for the User Defined Field(UDF)
Other terms
UDF, user defined field, sbo-udf, settings for UDF are inactive, the settings for the udf are greyed out.
Reason and Prerequisites
Need to use the Settings option to order the udf.
In Tools -> User Defined fields -> Settings the option 'Settings' is greyed out and inactive.
Solution
If in Tools -> User Defined fields -> settings and this option is not available then return to the document and click anywhere in the main document window.
Now return to Tools -> User Defined fields -> settings and this option will now be active.

PDE-PLI038 Cannot open file for use as a PL/SQL library

Hi,
We are using oracle 12 .0.4 on RHAS 4
I am trying to compile a .pll file with the following code
frmcmp_batch module=$AP_TOP/patch/115/sql/apacrndb.pls userid=apps/apps module_type=LIBRARY;
but it's returning the error
PDE-PLI038 Cannot open file for use as a PL/SQL library
Thanks
Umair

Umair,
What is the issue about?
Usually, it would be required to run the pls files to recreate certain objects (mainly packages) in the database, and you run the pls file from SQL*Plus as apps/applsys user.
Please update the SR and confirm with Oracle Support what the action plan you need to follow to resolve the issue.
Regards,
Hussein

UWL Subview does not show for one user

Hi All - We have a UWL Subview. It is working fine except for one user. He cannot see the entire Subview drop down box at all. It is as if it does not exist. I've verified he has the tasks for the Subview to appear. Can anyone give some ideas as to what other possibilities this can happen? I've tried several things. Verified with security no roles exist for functionality within the UWL. The user have tried going to our QA system and logged in as a test user id - Subview visible. His ID is valid and active in ECC. If you don't have a direct answer, maybe you know of tools on how to debug or trace the UWL. I've seen two threads exactly like my situation and they receive no responses. Hopefully, there is something new to my request.
Thanks in advance.

The issue is resolved. In the Portal UWL Admin screen, the user showed personalization settings for the Subview. We decided to delete all entries. He can now see the Subview drop down. It is weird because on his own his access to his own personalization settings is empty.

"view content preview in thumbnails" option is not available in view settings for "finder" for one user

"view content preview in thumbnails" option is not available in view settings for "finder" for one user

I hope this discussion can be revived. I have the same problem. There seem to be quite a few Japanese sites that don't bother specifying their encoding. Perhaps they are older and from a time when it was not necessary to adhere to standards. Examples: http://www1.plala.or.jp/CUE/cave_yozawa.html, http://chigaku.web.fc2.com/saitama/sanchi/youzawa/youzawa.html. Happy to upload screenshots, but how?
Is there a way to tell Safari what encoding to use if the web page fails to do that?

After i downloaded Firefox 7, I cannot open more than one page at a time. I have done everything you suggested about ad-on, etc. Other people are having problems. Can I get reall help with this or should I just reload Firefox 4?

Firefox 7 is a dud. Cannot open more than one tab at a time, will not open additional pages. Nothing you suggested has worked.
Can I take down Firefox 7 and reload Firefox 4?
I need to talk with a live person! I am real disappointed with this.

Sorry there is no telephone support. You could try the IRC if you want a quick response, ( whilst it is [https://support.mozilla.com/en-US/kb/ask open] )
Firefox 4 is not supported, but firefox 3.6 is
* see [[installing a previous version of firefox]]
There is a change to a preference which may help, post back with more details of your problems please.

Cannot open repository for application

Hi experts,
I am getting the following error while deploying the application in the server..
Cannot open repository for application
can any boby plz tell me why this error is coming and how to over come this..
regards,
viswa

HI fazal,
this is the complete error trace i am getting...
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Cannot open repository for application 'com.sap.demo.month_report.month_report.Month_report'.
     at com.sap.tc.webdynpro.serverimpl.core.um.AbstractClientUserFactory.isAuthenticationRequired(AbstractClientUserFactory.java:140)
     at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.checkAuthentication(ClientUserFactory.java:190)
     at com.sap.tc.webdynpro.serverimpl.core.um.AbstractClientUserFactory$1.checkAuthentication(AbstractClientUserFactory.java:151)
     at com.sap.tc.webdynpro.services.sal.um.api.WDClientUser.checkAuthentication(WDClientUser.java:214)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.checkAuthentication(RequestManager.java:713)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:237)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:202)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:127)
     at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:95)
     at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToRequestManager(ExecutionContextDispatcher.java:140)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:92)
     at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:104)
     at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
     at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doGet(AbstractDispatcherServlet.java:54)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:466)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:291)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
     at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:240)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:425)
     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:250)
     at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
     at com.sap.engine.core.thread.execution.Executable.run(Executable.java:109)
     at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
Caused by: com.sap.tc.webdynpro.repository.utils.RepositoryException: Did not find application 'com.sap.demo.month_report.month_report.Month_report' in repository.
     at com.sap.tc.webdynpro.serverimpl.core.repository.AbstractServerRepository.getApplicationInternal(AbstractServerRepository.java:182)
     at com.sap.tc.webdynpro.serverimpl.core.um.AbstractClientUserFactory.isAuthenticationRequired(AbstractClientUserFactory.java:134)
     ... 51 more
regards,
viswa

Account search functinality is not working for one user in portal

Hi friends,
We have configured E.P 7.0 with CRM 5.0 and configured CRM PCUI business package.
We have a role called <b>accounts and products</b> in portal. So accounts can be searched in this role.
Now our severity issue is for one of the super user,for ex su1, accounts search is not working in portal but the same is working in CRM GUI.
for example if we search for an account 233445(or any other account) in portal its showing no data found but if we search with the same criteria data is displaying CRM GUI.
We have checked with other 2 super ids. Both ends portal and gui search is working fine.
Am unable to figure out whats the cause of the issue as search is not working only for one user su1 .
we have checked by restarting the server also to clear the memory cache.But still search is not working in portal.
Could anyone of u please advice ASAP as this is severity issue.
Thanks & Regards
Sireesha.

Hi srinivas,
I have checked both the users credentials,permissions,groups in the GUI and also in the portal.
Both of the users profiles are assigned as same.
Could you please advice is there any other way to check it out?
Regards
Sireesha.

Cannot open iSync for one user

Similar Messages

Maybe you are looking for