Cannot open itunes  errorn2096 right clicked on quicktime player went to properties no compatibly tab

cannot open itunes  errorn2096 right clicked on quicktime player went to properties no compatibly tab

You're on the right track, because this one is usually (at the moment) a compatibility problem. But if you're getting this when launching iTunes, instead try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

Similar Messages

  • I have just updated my software and now I cannot open iTunes when I click on the icon in the dashboards, it doesn't open

    I recently updated my iTunes and now when I click on the iTunes icon the page does not pop up.  What do I do??

    See this thread: iTunes 12.1 Not Finding iPhone

  • My iTunes operating files were somehow corrupted on my pc. Is there a way to download iTunes again, and yet preserve my playlists? II cannot open iTunes at all right now. My playlists are intact on my iPod. Thanks

    My iTunes operating files were somehow corrupted on my pc. Is there a way to download iTunes again while  preserving my playlists?
    I cannot open iTunes at all right now.
    My playlists are intact on my iPod.
    Thanks

    Hi, InsaneCharlie. 
    Thanks for the question.  I see you have uninstalled iTunes and want this program back.  Start with completely uninstalling iTunes if present and all of it's components in the order specified in the article below.  Once this is done, download and install iTunes.  If none of your data was modified in the iTunes media folder, then your data should be present upon installation.  
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
    "The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    If you experience issues during installation, see the article below.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Regards,
    Jason H.

  • HT1926 We cannot open itunes after installing it. The licensing agreement comes up and we agree but then nothing happens. Each time we click on the itunes icon, the agreement comes up. We cannot get to itunes at all. I have followed some of the suggestion

    We cannot open iTunes after installing it. When we click on the icon the licensing agreement comes up and we click Agree but then nothing happens.  Each time we click the icon the agreement comes up.  We've tried uninstalling and reinstalling but we have the exact same problem.

    Refer to steps to remove SC files here:
    http://support.apple.com/kb/TS2363
    Then proceed to repair your QuickTime. START / CONTROL PANEL / PROGRAMS N FEATURES / highlight QUICKTIME and click REPAIR.

  • HT1338 I cannot open itunes. When I try, a popup says I need quicktime 7.5.5 but I cannot download it. Can someone help??

    I cannot open itunes. When I try, a popup says I need quicktime 7.5.5 but I cannot download it. Can someone help??

    Quicktime 7.5.5 can be downloaded from this link.
    http://support.apple.com/downloads/#quicktime

  • I downloaded the latest version of itunes.  Now I cannot open iTunes.  I receive this error message: The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll.  Thoughts?

    I downloaded the latest version of iTunes on my PC.  Now I cannot open iTunes.  I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll"  After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 127)".  I've uninstalled iTunes and reinstalled to no avail.  I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck.  I also tried system restore and that did not fix the problem.  Any thougths on a repair?   

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more.  Itunes starts but before anything loads a

  • Cannot open iTunes after upgrade due to missing .dll file

    I cannot open iTunes after a recent upgrade.
    The error is "Applepushservice.dll is missing.  Please reinstall iTunes."  Which I have now done 8 times.
    I have uninstalled everything, clear the cache and rebooted.
    Now what?  Can I download the file from somewhere else and if so, where do I install it?
    Many thanks.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • When itunes updated it self I got error message saying  Error 7 Windows error 126. I cannot open itunes. Any ideas?

    I got this When I last updated itunes. Can some please help? I cannot open itunes and it is anoying!!!

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Just installed the latest upgrade for iTunes. Cannot open iTunes store?

    Just installed the latest upgrade for iTunes. Cannot open iTunes store?

    Hey there Ray Neilson,
    It sounds like you are able to open iTunes but cannot access the store. I recommend the troubleshooting from the article named:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Troubleshoot issues in Windows
    If you haven't been able to connect to the iTunes Store for more than a day (and other customers on our discussion boards aren't experiencing similar issues) a software or Internet service provider (ISP) configuration issue may be blocking your access to the iTunes Store. Find out which ports and servers need to be allowed for iTunes Store access.
    Update iTunes to the latest version.
    If iTunes Store appears empty and only displays the message iTunes Store, follow these steps.
    Try the steps to troubleshoot iTunes Store connectivity in Windows.
    As with all firewalls not manufactured by Apple, you may need to configure Windows Firewall to allow iTunes to access the iTunes Store. Follow these steps for Windows XP, Windows Vista, and Windows 7.
    Try disabling any proxies built-in to Windows. You should avoid proxies because they can cause issues.
    If you're receiving a specific error message, follow these steps.
    If the issue still persists, contact your Internet service provider and confirm that these ports and servers are enabled over your network.
    Note: The hosts file may be blocking the iTunes Store.Microsoft's article How do I reset the hosts file back to the default? has instructions and a FixIt to have Windows try to reset the hosts defaults for you.Note: Some workplaces may put internal resources in the hosts file and may block iTunes Store. The FixIt doesn't work for Windows 8.To create a copy of your hosts file and replace it with an empty hosts file, follow the instructions below:
    You can find the hosts file at: C:\WINDOWS\SYSTEM32\DRIVERS\ETC.
    Select the hosts file. There should now be a duplicate of the hosts file named "Copy of hosts" (Windows XP) or "hosts-copy" (Windows Vista, Windows 7, or Windows 8).
    Drag the original hosts file to your desktop.
    Right-click the duplicate file and choose Open. You may be prompted to choose the program you want to use to open this file. Double-click Notepad.
    When Notepad opens, choose Edit > Select All.
    Choose Edit > Delete.
    Choose File > Save.
    Close Notepad.
    Right-click the duplicate file, and choose Rename.
    Type "hosts" (without quotation marks) and press Enter.
    Restart your computer and try connecting to the iTunes Store.
     If you still can't connect to the iTunes Store, your security software or firewall may be blocking the ability of iTunes to communicate with the Internet. Learn how to resolve security software issues.
    If the issue persists, try the troubleshooting in this article:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I cannot open itunes on my computer i have re installed and get msvcr80.dill error

    i cannot open itunes iget a error msvcr 80.dill after reinstalling itunes and cannot sync i phone or i pad

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Every time i try to open itunes to update apps for iphone 4s i can never get it to open, i went to command prompt and did the netsh winsock reset, still cannot open itunes

    i cannot open itunes to update apps on my iphone. i did the command prompt-netsh winsock reset, still cannot open itunes.

    Try following steps and test one at a time:
    1. Check to see if this file APSDaemon.exe is the problem here.
    Close your iTunes.
    Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
    Now open itunes and see if it is working?
    If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
    MSCONFIG
    Hit ENTER
    Click STARTUP Tab, Uncheck "Apple Push", click OK.
    Restart Windows.
    2. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
    http://support.apple.com/kb/TS2363
    3. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / ADD N REMOVE PROGRAMS / hightlight QUICKTIME, click CHANGE or UNINSTALL then REPAIR.

  • I can't open iTunes, dialogue says I need QuickTime 7.5.5.

    I can't open iTunes, dialogue says I need QuickTime 7.5.5, but when I download the upgrade it won't install over my QuickTime Pro 7.2.1. How do I upgrade QT so it'll be compatible with my iTunes?
    -Rob

    BDA and TMM,
    Excellent thanks. I've got iTunes working now, after downloading the latest version of iTunes by clicking Software Update from the Apple menu. And I downloaded QuickTime 7.7 from the links you recommended, BDA. For some reason I'd been unable to locate the latest QT for Leopard no matter how hard I tried—it was probably staring me in the face all the while.
    Much appreciated,
    -Rob

  • HT1222 I tried to download Itunes update 11.1.4 to my windows xp desktop computer. Somehow, It was not succesful. Now , I cannot open Itunes. It gives error message of R6034-runtime error. How can I resolve it?

    Hi,
    I tried to download Itunes update 11.1.4 to my windows xp desktop computer. Somehow, It was not succesful. Now , I cannot open Itunes. It gives error message of R6034-runtime error. How can I resolve it?

    Click here and follow the instructions.
    (99025)

  • I cannot open FF when I click on the desk top icon.

    I cannot open FF when I click on the Icon. I have reinstalled it, and done everything that I know ot do. I have restored my computer to a earlier date. I can get to Gmail through E-, but cannot open FF.

    It's possible that the desktop shortcut is corrupt. To create a new one, please follow these steps.
    #Right click the existing shortcut and go to Properties.
    #Then click the button called ''Find Target'' which will take you to '''firefox.exe'''.
    #Delete the existing desktop shortcut.
    #Right click and hold down the right mouse button while you drag firefox.exe out of its folder and onto the desktop. When you let go of the right mouse button, you'll get a menu. Choose '''Create Shortcut Here'''.
    I believe the "Find Target" button has changed in Windows 7, but I can't recall what it's called now.

  • I cannot open itunes in recovery mode

    i need to restore my iphone because it has been disabled for i have forgotten the passcode. it says connect to iTunes so i connect to iTunes, but while on recovery mode i cannot open iTunes it hanged. please i badly need your help..

    One reason why the password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can select one of the available layouts by choosing from the flag menu in the upper right corner, or cycle through them by pressing the key combination command-space or command-option-space. See this support article.
    Otherwise, you will either need to enter the recovery key (if you saved one) or erase the volume and restore from a backup.

Maybe you are looking for

  • Third party sale and stockable item

    Hi all , We have some products . For example "A " . We buy it from one vendor and maintain its stock and sale it as and when order comes . Same product when there is demand we sale it by third party process instead of holding the stocks we instruct v

  • Can type be edited in a pdf as easily & fully as in an ordinary computer file?

    Do you edit the files for us  when we send it or you just make editable?

  • Using photo frame

    Got this digital photo frame; plugged it into my PB and OS X said "Disk Insertion: the disk you inserted was not readable by this computer. Initialize... Ignore Eject". None of those options seems right; what to do? I did try Initialize... and it bro

  • Buying in US, bringing back to UK

    Hello What are the complications of buying an iPod in NYC and using it in the UK? I'll need a plug but apart from that will warranty still be ok? Anything else I might want to consider because some friends are flying to NYC next week and I can save a

  • Regd uwl config - adding

    hi all, I've a requirement to combine the below two xml config files to view in a single UWL iview: 1. com.sap.pct.erp.mss.tra 2. hradmin is it possbile to combine both as two tabs (list views)? (as per help its possbile, but don't know how to do) if