Cannot open Lightroom CC on Windows 7 64bit machine
Lightroom 5 still opens fine, but since I'm a Creative Cloud user, I'd like the full benefit of that. Any help is appreciated.
had the same problem. just tried this and it worked. Light room CC ( New released update ) CRASHES with first launch on any machine .
Similar Messages
-
Cannot Open SCCProfileConfig.exe on Windows 7 64bit
Hi All
Im having an issue with an application called Robosource Control 3.1. There is a component called SCC Profile Editor which on a Windows 7 x32bit device works fine, but it will not open at all on a Windows 7 x64 bit device. It flashes on then immediately off no matter what we try.
Has anyone seen this issue before ?
No errors in event logs, im running it as an admin user too.
Any ideas appreciated
ThanksHi there
The way you phrased your question makes me wonder if you are even using RoboSource Control. Are you?
If so, that's cool. But because you began by saying you are using an application called Robosource Control 3.1, it seems that perhaps it's tossing an error and you aren't even sure what the application may be.
Cheers... Rick -
I can't open Lightroom 5 in Windows 7 notes Catalog Error
I can't open Lightroom 5 in Windows 7. I keep getting a window titled "Confirm" and it notes an "Unexpected error opening catalog" and "The catalog could not be opened due to an unextected error".
3 choices come up:
Try Again Choose A Different Cataog Exit
I pick Try Again and it keeps cycling back
I pick choose a different Catalog and I get another window with my last Catalog and nothing else. I get 4 options:
Choose A Different Catalog Create A New Catalog Open Quit
The last catalog is the only one that is in this Window and is thus the only one selected. I try to Open it and it cycles again. I try to choose a different one and I can select older Catalogs but nothing happens. I try to create a new Catalog and I can do so but when I create one it's as though it was never created as I can't find it anywhere. Please help!I see that this was a while ago, and that you never received a reply....but did you figure out a solution? I'm experiencing the same thing.
-
Cannot open Lightroom on iMac after download of OS X Yosemite
After downloading Yosemite on iMac I cannot open Lightroom files. I am getting the message "The Lightroom catalog cannot be used because the parent folder “/” does not allow files to be created within it."
Can somebody help me please.Here are some start up commands you might like to try Startup key combinations for Intel-based Macs - Apple Support
Personally I would try in Recovery mode...OS X: About OS X Recovery - Apple Support -
Windows 2008 R2 - I just started receiving this when i log in, and also when i try to manage the machine:
MMC Cannot open the File:
C:\Windows\system32\ServerManager.msc
This may be because the file does not exist , is not an MMC console , or was created by a later version of MMC. This may also be be because you do not have sufficient access rights to the file.
This always worked before, and works for other users just not me on this particular box. This is a production box and i need a resolution quick please. Thanks in advance.
PMHas the system update readiness tool been run without error?
http://windows.microsoft.com/en-US/windows7/What-is-the-System-Update-Readiness-Tool
Then check the %SYSTEMROOT%\Logs\CBS\CheckSUR.log file for errors.
You can also try creating a new MSC
Start|Run|"mmc"|File|Add/Remove|Server Manager|Add|Local|OK|OK|File|Save As
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
I don't believe the last Thunderbird update worked, there was a very fast error message. But since then I cannot open jpeg attachments in Windows Picture and Fax Viewer. If I go to Tools, then options, the jpeg line is grayed out, and the drop down menu does not show Windows Picture and Fax Viewer. The windows picture and fax viewer still works on my computer, but not for opening attachments.
I did as you said - deleted the entry for jpeg, but when I tried to open one there is not an option for Picture and Fax Viewer in the drop down, and it can't be found by browsing. It's just not there anywhere even though I can see pics in it except in email attachments.
-
Hi Experts,
We are installing the xmii system on a server, it was not installed completely.
Now we have deleted the xMII folders from Add and Remove in Control Panel.
After deleting these folders, when we are opening SAP Management Console, it is giving one <b>Error MMC cannot open the file "C:\WINDOWS\sapmmc.msc."</b>
Please help us to resolve this problem, we have no idea to resolve the same.
Regards,
Study SAPHi,
Looks like your mmc dll is corrupted, with your install and uninstall of software.
Two Options:
1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
OR
2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
Hope this helps. points are welcome.
-K -
I cannot open the store (using Windows 7). Every time I try there is a blockpage.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
'MMC cannot open the file C:\Windows\SAPMMC.MSC'
Hi
When I try and run SAPMMC on the desk top I get the error :
'MMC cannot open the file C:\Windows\SAPMMC.MSC'
this is because the file does not exists, is not an MMC console, or was created by a later version of the MMC'
I have full permissions on this server, has anyone seen this error before?
The file C:\Windows\SAPMMC.MSC does exist, infact there is a .1, .2, .3 and .4 version in C:\Windows.
Thanks for any help.Hi,
Check out following link and notes inside it.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=936273]
Hope this helps.
Manoj Chintawar -
Error:Cannot open the file c:\windows\sapmmc.msc
Hi Folks,
I have been using SAP IDES ECC 6.2 for a while and now all of a sudden encountered a problem CANNOT OPEN THE FILE C:\WINDOWS\SAPMMC.MSC.
I am a technical consultant and i know nothing about basis and sap installations.
Is this error so fatal? How can i fix the problem..
Thanks in advance.
Ranjith kumar.Hi
Ranjith
Hi,
Looks like your mmc dll is corrupted, with your install and uninstall of software.
Two Options:
1. Upgrade the Kernel with latest Patch level, which comes with new SAPMMC.dll file
OR
2. Just download the SAPMMC*.sar file from service market place and extract in exe directory, since it is windows re-booting the server doesn't hurt.
Regards
Bhaskar -
Cannot open Lightroom 5.6
"Cannot open Lightroom 5 Catalog because another application already has it open"
Would anyone know how to deal with this problem? LR is up to date. I have images due for delivery.
Thanks for any comment!This is most likely caused by a "lock" file. It is created if Lightroom is not closed down in the correct manner.
Jim Wilde has a great answer to a post on lightroomforums.net
Can't Open LR 5.7 - Lightroom Forums -
Cannot open Lightroom 5.6 after catalog backup (hour glass appears, then nothing happens)
I found the solution to this from these thread Re: Photoshop CC opens and then closes immediately. What gives? and Re: Photoshop CC Crashes/Closes within seconds of startup
I did it and it works for me So, I think I should share this so people who have faced the same issue as I can give it a try.
Basically, Just uninstall the Photoshop and Creative Cloud, then rename the folder SLCache to SLCache_old. Restart your computer once and then re-install everything again. (CC and PS)
It should work.
Thanks -
I cannot open a 2nd firefox window
I cannot open a 2nd firefox window. And if I close firefox, I cannot not restart unless I go to the task manager and close it there too
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]] -
'Not enough room' - Cannot open Lightroom catalog
I cannot open Lightroom catalog bc there is 'not enough room on the hard drive named ...' I keep erasing more and more on this hard drive and still it does not work and keeps saying the same thing. Please help!
It says 'before continuing, please make at least 20 MB available on this hard drive'. I have deleted much more than 20 MB and still nothing helps.
Under system info it says:
Lightroom version: 3.2 [692106]
Version: 10.6 [8]
Application architecture: x64
Physical processor count: 4
Processor speed: 3.0 GHz
Built-in memory: 4096.0 MB
Real memory available to Lightroom: 4096.0 MB
Real memory used by Lightroom: 185.3 MB (4.5%)
Virtual memory used by Lightroom: 2402.8 MB
Memory cache size: 0.0 MB
Displays: 1) 1920x1080
Serial Number: [removed]
Application folder: /Applications
Library Path: /Users/susanehong/Pictures/Lightroom/Lightroom 3 Catalog.lrcat
Settings Folder: /Users/susanehong/Library/Application Support/Adobe/Lightroom
Also, please note that I am able to open Lightroom under a different catalog and the photos appear but they cannot be imported bc they 'cannot be read'.
Please help! -
I cannot open lightroom "lightroom has stopped working" error message
I cannot open lightroom "lightroom has stopped working" error message
I'm having what sounds to be the same issue. May I ask what version you were running? I'm using 4.1... And more importantly, have you figured out a solution?
Any help would be greatly appreciated!
Thanks!
Maybe you are looking for
-
How do I close all apps at once
The shutdown procedures in Lion are broken (IMHO). Shutdown should mean shutdown, not sleep/standby. This is a powerful computer, not some cheap portable toy. Multiple apps is not a bolt on but a norm. In another thread there seems to be no apparent
-
Cancellation of Incoming Payments
Hi, Need help on how to capture System Message Event (Yes or No) when cancelling an Incoming Payment because I need to create Journal Entries after the cancellation. Thanks
-
Error with Drop -down UI elements in my HCM PF Form
Hi All, I am facing some error with Drop -down UI elements in my HCM PF Form. I have some 2-3 DD elements, which are not binded to any backend field, so i am specifying their values in the UI Properties itself. I am able to see my drop-down list valu
-
im not sure what to set this too i have tried several combinations hardware: asus p4p8e dlx p4 2.8 800fsb ht 1gb pc3200 ati radeon 9800 aiw 128mb philips 190s lcd dvi>vga adapter monitor when i try to startx after configuring xorgconfig sometimes wil
-
Updating flash from a dynamically changing XML file
Creating a non-interactive status display: I want to have the flash display reflect data in a server-based XML-file. So far this is easy. But I want the display to change everytime the XML file changes-- in order to reflect status changes. I've used