Cannot open more than one photo in Photoshop

Hi
I don't know if anyone can help me, but I am having an issue with Photoshop CC (2014), I cannot open more than none photo at a time, and keep getting the attached error.
It has been working fine, until i have tried it this evening.
Regards
Mick

There's something wrong with your system.
Please give detailed information.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

  • Photoshop CS3 doesnt open more than one photo

    I have win XP + Adobe CS 3 Standard installed on my pc: when i open more than one photo at the same time with Photoshop CS3, the application immediately close.
    I have two pc with the same configuration and i have the same problem. Note that i have Adobe CS2 installed + upgrade to Adobe CS 3. If i use Photoshop CS 2 i dont have trouble. Thanks,

    Thanks Freeagent
    Unfortunately this did not work
    I have subsequently reinstalled (ie repair) - no help
    What seems to be happening is that I open 1 photo from Bridge - work on it - close it or go to print - then close then cannot open another photo
    Didn't happen with CS2
    Any further ideas? Thanks

  • After i downloaded Firefox 7, I cannot open more than one page at a time. I have done everything you suggested about ad-on, etc. Other people are having problems. Can I get reall help with this or should I just reload Firefox 4?

    Firefox 7 is a dud. Cannot open more than one tab at a time, will not open additional pages. Nothing you suggested has worked.
    Can I take down Firefox 7 and reload Firefox 4?
    I need to talk with a live person! I am real disappointed with this.

    Sorry there is no telephone support. You could try the IRC if you want a quick response, ( whilst it is [https://support.mozilla.com/en-US/kb/ask open] )
    Firefox 4 is not supported, but firefox 3.6 is
    * see [[installing a previous version of firefox]]
    There is a change to a preference which may help, post back with more details of your problems please.

  • Opening more than one file in Photoshop CS5

    Feeling rather silly! Have used Photoshop for many years — and in fact taught it to many.
    I am unable to open more than one doc at a time. If I open one, when I open the second one it replaces the first one.
    It is essential for what I do to be able to have more than one doc open at a time.
    Am I missing something that is right before my eyes?

    How are you supposed to know this stuff — no manual??
    The manual is available for download.
    http://forums.adobe.com/message/2790684#2790684
    Albeit it seems to be incomplete …
    Anyway that stuff (and the Application Frame) was introduced in CS4 and did cause some confusion then, too.

  • Cannot open more than one Firefox session

    I am using Windows 7 on a PC. When I installed Firefox 3.6, I found that I could not open more than one session unless I deleted the process in Task Manager. When I reopened Firefox, it immediately said it had installed 6 plug-ins. It would then allow me to open a second Firefox session, but after this I could not open any more sessions. I do not have this problem with IE or Safari.
    Why is it installing plug-ins without my asking for them?
    Could the plug-in's be causing the problem of not allowing more than one session?
    How can I have a clean Firefox program without plug-ins and one that will open any number of sessions like it used to be?

    What happens when you right-click a link and use Open Link in New Window?

  • Cannot open more than one window with Firefox

    I've been having this problem for a couple of weeks, now, and I've run out of ways to try and fix this.
    One day, after starting my computer up, I opened Firefox. No big deal, everything looks fine, tabs are working, etc. Then, when I went to open a second window, nothing. The first window still works fine, I can open tab upon tab, but it just won't open any more windows.
    As much as I'm a fan of the browser tabs, I still prefer to have them spread out over more than one window.
    I've read through a ton of different troubleshooting walkthroughs and whatnot, reinstalled three or four times, restored settings, but nothing works.
    Well, not entirely, I guess. Here's the part that I can't quite figure out. When I disable every single addon, Firefox works just fine. I've done the checking down the list, trying to single one out, but it's *any* addon. Even something as simple as a dictionary search ([https://addons.mozilla.org/en-US/firefox/addon/68/]) causes this to happen.
    I've checked with an older computer with an older version of Firefox, and it still seems to work fine with addons enabled, so I'm wondering if this is an update issue?
    Would reverting back to a previous version of Firefox solve this, and if so, where would I be able to find downloads for a previous version?
    So, like I said, I'm at a bit of a loss here. Sort of at a crossroads for trying to figure out what to try next, so I'm hoping someone a bit more knowledgeable can help steer me in a direction.
    Edit: I just noticed that the posting includes system information with my question. I should clarify that I'm posting this from an older computer with an older version of Firefox. On the computer that I'm having this issue with, I'm using the newest version of Firefox (3.6.8).

    Some old posts indicate the following add-ons have caused the problem of not being able to open a new window in Firefox in the past. If you have any of them you might want to disable or uninstall them to see if that is causing your problem.<br />
    * HP Smart Web Printing Toolbar
    ** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=531462&forumId=1
    * Skype
    ** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=472881&forumId=1
    ** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=531462&forumId=1
    * Zone Alarm Toolbar
    ** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=472881&forumId=1
    ** https://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=624545&forumId=1
    ** http://forums.zonelabs.com/showthread.php?t=73592&highlight=firefox+window
    <br />
    You need to update your plug-ins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
    * Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''<u>may</u>''' need to update)
    * Shockwave Flash 10.0 r32
    * Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
    #Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #'''Update Shockwave for Director'''
    #*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
    #*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
    #*When the download is complete, exit Firefox (File > Exit)
    #*locate and double-click in the installer you just downloaded, let the install complete.
    #*Restart Firefox and check your plugins again.
    #*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
    #'''Update Shockwave Flash'''
    #*Use Firefox to Download and SAVE to your hard drive from the link in article below
    #*SAVE to your Desktop so you can find it
    #*After download completes, close Firefox
    #*Click on the file you just downloaded and install
    #**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
    #**Note: Most browsers other than IE will also get updated with this one download
    #**Note: To update IE, same procedure '''<u>but use IE</u>''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
    #*After installation, restart Firefox and check your version again.
    #*'''<u>Download link and other information</u>''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
    #'''Update Java:'''
    #* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
    #* Removing old versions: http://www.java.com/en/download
    <br />
    You are using an out-of-date version of Firefox. Unless you have a reason for using that old version, you might want to consider upgrading.
    *The Firefox version series 3.0.x is no longer being supported or updated, even for security issues.
    *The last version in the 3.0.x series was 3.0.19 which was released 03/15/2010.
    *You are using version 3.0.13 which was released 07/31/2009.
    Consider upgrading to the current version, Firefox 3.6.8. Firefox 3.6.9 is scheduled to be released in a few days and the new Firefox 4 will be released later this year or early next year.
    * See: https://support.mozilla.com/en-US/kb/Upgrading+to+Firefox+3.6
    * Or you can download the full installer and save it to your hard drive for installation from: http://www.mozilla.com/en-US/firefox/all.html
    * Also see: http://support.mozilla.com/en-US/kb/Installing+Firefox

  • Please help cannot open more than one window at a time.

    Everything was working well but this morning I could not have more than one window (application or folder) open at a time.
    As soon as I open one, the previously oppened one closes.
    I tried restoring from Time Machine and also Lion altogether but this behaviour did not change.
    I posted in the Imac forum as well but maybe this forum is more appropiate.
    Thank you.

    Another possiblity is that "Single Application Mode" has been set.  This would be unusual as it normally takes a terminal command to set it.  You can check by downloading the program TinkerTool from this site:
    http://www.bresink.com/osx/0TinkerTool/download.php5
    It's free and doesn't modify your system, just turns on or off the hidden options that are already there.  Run it and look in the Dock tab and see if this option is checked.  If so, uncheck it and click the relaunch dock button.

  • CS5 Will not open more than one photo/file simultaneously

    In CS5, when I select more than one image to open together, only the last image in the selected group opens. Also, when I select "new" to open a new page on whitch to paste multiple copies of an open image, the open image deletes. Have never had this problem in previous versions of PS and version CS3 that I have kept until I get CS5 to function, works fine completing these functions. I couldn't find any setting in preferences to resolve this issue.
    I am using CS5 on a Mac running Snow Leapord OS10.6.8

  • How can I open more than one window in Photoshop Elements 12?

    In Version 8 I could work on multiple images in separate windows. It appears that I cannot do this in Version 12. Is there a way around this in 12 or do I have to just go back to using version 8 for the work I am doing?

    Go to Adobe Photoshop Elements Editor>Preferences>General (mac)
    or Edit>Preferences>General (windows)
    and check Allow Floating Documents in Expert Mode
    For future reference you should post in the photoshop elements forum, where folks are more familar with photoshop elements.
    (you posted in photoshop forum)
    http://forums.adobe.com/community/photoshop_elements

  • Cannot open more than one PDF at a time

    Hi, when I open a PDF my laptop automatically closes any other PDF's open - I have uninstalled & reinstalled all Adobe products but still have the same issue - help!

    What has changed (a few versions of Reader ago) is that instead of each PDF opening in a part of one window, Reader opens a separate window for each. (A lot of people don't like this, but it's the way Microsoft recommended at that time).
    Now, each of these PDFs-in-a-window can fill the screen, or can be smaller. You can use Window > Tile for example, or resize so you have a bit of an overlap. You should also be able to choose between the different windows right in the task bar by holding down the mouse on the Adobe Reader icon.

  • I cannot open more than one browser in firefox, I did a reinstall and now cannot open any browsers

    I went to open firefox, and I got one window. It would not open additional windows. It would open a ctrl t tab,. but no additional windows. I usually have 8 windows running at once, it will not work at all now
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/531.9 (KHTML, like Gecko) Version/4.0.3 Safari/531.9.1

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Cannot download more than one photo file...

    I am having trouble with my 80GB's photo capabilities. Everytime I try to load pictures onto it, iTunes automatically deletes any pictures that were already on my iPod.

    Just reinstantiate your PrintStream thats outputting to the files, for example if you encounter something in the input file that makes you want to change text files(i assume ud have an IF statement), then just reinstantiate your printstream passing in another file for output as the parameter.

  • Photoshop CS3 doesnt open more than 1 photo

    I have win XP + Adobe CS 3 Standard installed on my pc: when i open more than one photo at the same time with Photoshop CS3, the application immediately close.
    I have two pc with the same configuration and i have the same problem. Consider that i have Adobe CS2 installed + upgrade to Adobe CS 3. If i use Photoshop CS 2 i dont have trouble. Thanks

    Thanks Freeagent
    Unfortunately this did not work
    I have subsequently reinstalled (ie repair) - no help
    What seems to be happening is that I open 1 photo from Bridge - work on it - close it or go to print - then close then cannot open another photo
    Didn't happen with CS2
    Any further ideas? Thanks

  • Photoshop can't open more than one graphic at a time without crashing

    I get the error:
    The instruction at "0x7c918af2" referenced memory at "0x00000010". The memory could not be "written".
    Anytime I try to open more than one image in Photoshop at a time, regardless of how I do it - doesn't matter if I choose the image and "open in photoshop" or if I am in photoshop and go to "file/open".
    It's Photoshop CS3. I have already uninstalled, restarted the computer and reinstalled. I tried to "repair/change" from Windows, but it asks for the CS3 cd and then CS4, which I don't have since I'm using CS3. 
    This is quite frustrating as it would be nice to be able to merge photos and the myriads of other things you can do with multiple images at once, if opening them does not crash your program.

    mikeobe wrote:
    OK, kinda slooow here, I hope I'm not trying your patience!? If I understand you correctly, install dummy drivers and then the drivers that came with my printer, Designating NO default printer! Then when I need to use the printer I will have to declare which one each and every time?
    Or, just intall by new printer but do not Delcare it as the Default printer, I guess in this instance there would be NO default printer?
    You may not even have the problem!
    Have you installed the new printer yet?
    There are many more people who don't see it happen than those who do.
    PS: there is always a default printer.

  • Why can I no longer open more than one tab in Firefox? Has Firefox been saboutaged by an update by Microsoft?

    I have been using Firefox for over 2 years and like the (unreliable) Windows Explorer before it I took for granted the ability to open multiple tabs. 2 days ago my computer downloaded some updates (even though I try to stop it) and after the compulsary restart I cannot open more than one tab in Firefox, even though the browser apparently invites me to. Is this an attempt by Microsoft to saboutage Firefox to build up support for its own product?

    Not Microsoft, it is the Ask toolbar. Try uninstalling the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and the current version of Firefox.

Maybe you are looking for

  • Excise invoice print automatically

    Dear Experts How do we take  excise invoice printout automatically,When I save the billing document . Excise invoice will be created automatically in the background while creating commercial invoice. The output condition type  is same for both invoic

  • How to extract data from CRICKET MCS410CA using RS232

    I need to extract data from CRICKET and use it for internal Localization of mobile robot.How to use the extracted data to form a map...

  • Help with a "AT NEW" statement

    I am debugging at some code and I am trying to understand the following statement <i>LOOP AT it_data_item_final INTO st_data_item_final. MOVE st_data_item_final-waers TO w_waers. <b>AT NEW xblnr."xblnr." budat xblnr waers.</b>       MOVE-CORRESPONDIN

  • Large Flat Files

    I have some large pipe delimited flat files (upto 1.5gb in size) from a Mainframe that i need to get into Oracle. I was just wondering if this is possible via Oracle Workbench. Problem with using SQL*Loader was getting the files onto the database box

  • Yahoo!!!????!!!

    CAN ANNNNYONE TELL ME!!!!?? WHY IS MY YAHOO MAIL COMING SOOO LATE...SOMETIMES ITS 15MIN, 30MIN....EVEN 2 HRS!!!! I DELETED THE ACCOUNT 1000000000X AND STILL LATE....THIS IS MY 3RD APPLE IPHONE....I LOVEEEEE APPLE/MAC BUT I NEED MY EMAILS ON TIME...TH