Cannot open .mov files exported from FCP X 10.0.9

I am trying to export an H.264 version of a 422 file for use on Vimeo. When I go to my desktop and click on the exported file to check it I get a message that says the file type is unsupported.
Neither my old nor new Quicktime programs will open the file. I've also failed at directly uploading the clip to Vimeo.
I need help!
My operating system is 10.7.5, would this cause the error?
Thanks,
Tyson

Exporting from 10.0.9
I used the Share button and tried both "Master File" and "Export File" to save an H.264 version to my desktop.

Similar Messages

Newbie question: How to share large QT movie files exported from FCP X?

Well, I've navigated through FCP X for the first time and I now have 16 QuickTime movie files I have exported from FCP X. Each file is a song from a live band performance. The files are:
- Apple ProRes 422
- 1920 x 1080
- 24-bit
- Frame rate 29.97 fps
Now I need to share these files with the band members. They will use them for two purposes:
- Watch, as feedback on their performance. In this case, I'd like to preserve the quality as much as possible
- Put some of the movies on YouTube, where quality will be lost, of course. They may post only short clips from the songs.
These 16 .mov files total 115GB. The smallest is 6.5GB, the largest is 13.9GB.
The quality of the movies is fantastic, both video and audio. I cringe to think about degrading the quality............but I have the practical problem of how to get the files to five different band members.
I normally distribute audio files I've mixed in Pro Tools via DVD-R discs, but the files are much smaller.
What are my options for sharing the files?
Do I need to use an application like Compressor to compress the files (ugh) to get them onto multiple DVD-R's?
I would assume this is a common problem that all FCP X users deal with.

I strongly recommend you to use Compressor. It is easy to use and there a lot of presets.

CS5 cannot open .idml file exported from CS6

I've seen this question before from people having problems with other versions of InDesign. I, too, am having an issue with plug-ins that do not allow me to open an idml file. I downloaded the script that verifies the version used to create the idml to be sure it really was made from CS6, not CS5.5. It's not an empty file as it is 3.3mb Interestingly, when the customer packaged the file it came up with no links. It's a 32-page document with lots of photos, graphics, etc. How it is possible that it would not have any links? Any suggestions short of having to upgrade to CS6 would be helpful. Thank you.

Hi Peter,
I'm guessing it might have been a network corruption problem. She brought in her laptop, we made another .idml file and loaded it to a USB stick, then transferred it to my computer. The file opened just fine. And yes, she had pasted all her images, so we have her collecting the bits and pieces for me to review and relink everything. I believe I have the patch, but will double-check. Thanks!

Aspect ratio issues in iDVD with mov files exported from FCE

Please help. I believe this is an iDVD bug. I have found some relevant discussion of it on online forums - but have not found a solution that works for me. I am looking for a workaround.
http://discussions.apple.com/thread.jspa?threadID=1356500&tstart=31
PROBLEM STATEMENT:
My 4:3 movies, exported from FCE in QT-with-conversion formats (any 4:3 format) - appear in iDVD with gray side-pillars (as expected for 4:3) AND with a black line (letter-boxing) at top and bottom - as would be for 16:9. It appears the aspect ratio is also distorted i.e. 16:9. (The iDVD project is set to 4:3.)
1- A 4:3 mov file exported from FCE using Quicktime Movie format (no conversion) does not have the problem, but I cannot de-interlace the video using this export mode.
2) A 4:3 mov file exported using QT-with-conversion mode (any 4:3 format) DOES have the problem. I need to use this mode in order to get de-interlace.
(Exception: 640x480 VGA mode does not have the black lines, and it displays correctly in dvd player on my computer screen - but on the TV screen, it crops content from the top and bottom of the movie, so this is not an option.)
3) In Finder, if you click on mov file exported QT-only (no conversion), it opens in the FCE viewer. If you click on mov file exported in any other 4:3 mode, it opens in Quicktime viewer (i.e. there is absolutely something different in the header/ID of these files.)
4) All mov files, regardless of export mode, show correctly in Quicktime viewer - no black line, no distortion. The problem does not occur outside of iDvd.
5) I tried passing the QT-with-conversion mov files through an Inverse-Anamorphicizer (per suggestion on forum - this apparently fixed the problem for some people) but the resulting output mov (i.e. the inverted product) still had the same problem.
I am, so far, left with this trade-off: Give up the de-interlacing, or live with the letter-boxing/ distortion. Neither is acceptable.
I am looking for a workaround:
1) A way to export de-interlaced 4:3 mov from FCE that shows in correct ratio in iDVD
2) A way to "convert" / re-head mov file after exported so that it displays corrrectly (inverse-anamorphicize) so that iDVD reads it correctly
3) Can the mov be de-interlaced after the fact (so I could use QT export without conversion)?
4) Something besides iDVD to put this together - that doesn't have this problem? (I like and want to use the iDVD menu/theme.)
5) Other?????
I also notice that all the QT-with-conversion mov files are 1/3 to 1/2 the size of the QT-only mov file, which is valuable and preferable to me. (I don't see any quality difference in the display...)

In the Preview window > top frame > middle button
do you have correct for pixel aspect ratio checked or not?
!http://i533.photobucket.com/albums/ee340/gogiangigo/Picture1-4.png!

PAL files exported from FCP don't display

This is a strange one... SD PAL uncompressed files exported from FCP 6.03 won't display, you just see black. HD files are fine, as are SD PAL files exported a while ago - prior to a recent pro apps or QT update possibly? As a workaround, if they exported via compressor instead of by 'export quicktime' in FCP, they work fine. Shake is 4.0 since 4.1 doesn't want to display via a decklink.
Any ideas? This seems to be a new one.

Does the computer your using to view this video have Final Cut Pro installed?

Why won't .MOV files export from Lightroom?

Why won't .MOV files export from Lightroom?

The will.
Or at least they can, and do, sometimes, if you have good MOV karma..
Why not supply a little more info, like:
* Which OS
* Which version of Lightroom
* History of MOV files.
* Export format.
* Do other video types export OK
* How many different MOV files have you tried - all with the same history?
and of course:
* What, exactly, happens, when you try?
Rob.

Cannot open .avi files imported from Nikon d90 in Adobe Premiere 6.0.

Cannot open .avi files imported from Nikon d90 in Adobe Premiere 6.0.
When I try to open the file I get the following error message:
"cannot open that file
the file uses an unsupported file compression format"
I really need urgent help with this so if you know a soloution, please post it!

I don't do mjpeg so you will have to search the forum for advice
But... having a playback codec installed does not ALWAYS mean the codec will work for Premiere editing
After you search the forum and find the (I think free) codec vendors, you will need to install fresh so Premiere will "see" the codec for editing
Or, Google
convert mjpeg avi
To convert to DV AVI type 2 with 48khz sound so the files will "natively" edit in Premiere
My GUESS (you didn't say) is the d90 is a STILL camera that has a video function, not a true camcorder
If you plan to do much video work, you need a tape-based DV camcorder so you use Firewire to do a digital transfer as a "real" AVI that Premiere may edit without conversion or extra software
For a Firewire DV Camera - look at Panasonic PV-GS320 or GS500 (Note that I have not used either, but they have good reviews)
http://reviews.cnet.com/Panasonic_PV_GS320/4505-6500_7-32330317.html
http://reviews.cnet.com/digital-camcorders/panasonic-pv-gs500/4505-6500_7-31660646.html

HT4796 I cannot open any files transferred from the PC to my MAC as I am "not authorized". How can I correct this?

I cannot open any files transferred from my Windows PC to my Mac as I am "not authorized". How can I correct this?

Select the folderr containing all of those files, CMD+I, click on the lock, enter your admin password, add yourself with read & write, and click on the action button and select apply to enclosed items. That should do the trick. BTW, I don't have a PC, so i've not transfered any such files to my machine.

Illustrator error opening eps file exported from sketchup pro 8

When I attempt to use Illustrator CS6 to open an .eps file exported from Google Sketchup Pro 8 I get the following error message "the file is an unknown format and cannot be opened". If I try to place/link the file I get this message "can't place the illustration. Could not set a position inside the file." Any thoughts on why I'm having this issue? Is there an eps version compatibility issue I should be aware of?

Hi Mike. Here is the screenshot you requested.

I cannot Open EXCEL files transferred from my old HP laptop.

I am unable to open EXCEL files transferred from my HP LapTop. How to resolve?

The forum for MBP:
MacBook Pro
As for Excel, checked microsoft office community?
Maybe if you try export first....?
Vista has its own ownership permission flags. Maybe if you modify the file or a copy first, and then copy.

Color shift when converting .mov file exported from Macromedia Flash

I'm trying to convert quicktime file exported from Flash into any other format using Quicktime Pro 7.0.4 and I get substantial color shift. Here's the picture:
http://img525.imageshack.us/img525/1518/screen3ov.jpg
On the the left is the initial file, and on the right is what I get. I've tried all codecs setting (targa, jpeg2000, animation) but no luck. Please help!

I am in the midst of trying to figure out the opposite : Flash to After Effects. I am betting that this is an issue of 'color profile' attached to the images and the gamma settings in that profile. RGBA is only part of the story - color profile is all the rest of it. Eye Dropper doesn't tell you the color profile attached to the image.

Trouble importing .mov files coming from FCP/Mac

Hello,
My friend works on Final Cut Pro on Mac. He gave me rushs from vidéos he imported (and the exported) on FCP.
An example of these files is here :
https://docs.google.com/leaf?id=0B9S9yK830UrNM2QyZTBhYWEtYjM2NC00NWNiLThiZTktOWQwZGNjNzY1O GMz&hl=fr
There are several file sizes 1280 / 720 and others.
Codecs are : Codec : MPEG-1/2 Video (xdva)
Codec : PCM S16 LE (sowt)
I can read the files with VLC on my computer.
When I import the files on Premier Pro CS5... it crashes the program.
I went through the forums... tried to download more codecs via Klite Codec Pack. I also installed Calibrated(Q) XP Options... but i'm not sure i used it right.
In the end, I am unable to do anything... and I am extremely frustrated, and MAD at Apple and it's never-compatible formats.
Anyone can help ?
Thanks.

Hi,
I downloaded your file and I can also confirm that it freezes both PremierePro CS5 and CS5.5. It just freezes when trying to create peak file.
I also have Calibrated(Q) XP Options.
Quicktime Pro tells that it is XDCAM-EX 720p50 1280x720
With Quicktime Pro you can export it to other format, I tried Avid DNxHD 720p/50 and Premiere opened it nicely.
But 300 files...
pena

CS6 AI Cannot open a file saved from CS5 AI

Had tried to save and rename the file and place in the local C: harddrive, filename only English letters. Doesn't work.
Had uninstalled completely the CS6 Master collection and CC cleaner tools and reinstall the CS6 again, but problem still there.
Using Win8.1 Pro 64bit desktop at home.
Acrobat X Pro can open the AI file !
I am going to reinstall back the old version CS5 Design Premium to keep my work going on.
Is there a solution for this problem up to now ?
Below are the message from the log file after clearner
Gen_WWCombined-en_US-20121017_1230
[Thu Feb 26 20:00:36 2015] Please enter (y) for Yes or (n) for No. ... >>
[Thu Feb 26 20:00:40 2015] Choose from one of the following options to clean up :
[Thu Feb 26 20:00:40 2015] 1. All
[Thu Feb 26 20:00:40 2015] 2. Adobe Flash Player 10.2
[Thu Feb 26 20:00:40 2015] 3. Creative Cloud 2014 , Creative Cloud & CS6 Products
[Thu Feb 26 20:00:40 2015] 4. Creative Cloud 2014 only
[Thu Feb 26 20:00:40 2015] 5. Creative Cloud only
[Thu Feb 26 20:00:40 2015] 6. CS6 only
[Thu Feb 26 20:00:40 2015] 7. CS5-CS5.5-CS6
[Thu Feb 26 20:00:40 2015] 8. CS5-CS5.5
[Thu Feb 26 20:00:40 2015] 9. CS3, CS4
[Thu Feb 26 20:00:40 2015] 10. Adobe Id credentials
[Thu Feb 26 20:00:40 2015] 11. Quit
[Thu Feb 26 20:00:40 2015] Choice :>
[Thu Feb 26 20:00:43 2015] User selected: All
[Thu Feb 26 20:00:43 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
[Thu Feb 26 20:00:43 2015] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Thu Feb 26 20:00:43 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\caps.db
[Thu Feb 26 20:00:43 2015] Orphan session will be removed : adbeadbeadbeadbeadbeadbeadbeadb
[Thu Feb 26 20:00:43 2015] ..
[Thu Feb 26 20:00:43 2015] Removing entries from the installer database
[Thu Feb 26 20:00:43 2015] Updated tsInstalled status to 0 for removal from 2 for installation in the table ribs_collection_paylaod for session adbeadbeadbeadbeadbeadbeadbeadb
[Thu Feb 26 20:00:43 2015] Updating installState
[Thu Feb 26 20:00:43 2015] Removing content of Product : AdobeColorVideoProfilesCS CS4, Version : 2.0
[Thu Feb 26 20:00:43 2015] Warning: Payload with ID : {4F3CE025-D60B-4E6B-8D39-B04CD3769008} does not have an InstallDir value. Deletion of patch files (if any) may not happen.
[Thu Feb 26 20:00:43 2015] Deleting the paylaod: {4F3CE025-D60B-4E6B-8D39-B04CD3769008} from the table ribs_payload and other associated tables for payloads
[Thu Feb 26 20:00:43 2015] Removing content of Product : AdobeColorVideoProfilesAE CS4, Version : 2.0
[Thu Feb 26 20:00:44 2015] Warning: Payload with ID : {8D71D024-447A-4B6F-A9CD-58443FFC43C4} does not have an InstallDir value. Deletion of patch files (if any) may not happen.
[Thu Feb 26 20:00:44 2015] Deleting the paylaod: {8D71D024-447A-4B6F-A9CD-58443FFC43C4} from the table ribs_payload and other associated tables for payloads
[Thu Feb 26 20:00:44 2015] Removing content of Product : AdobeColorCommonSetRGB, Version : 2.0
[Thu Feb 26 20:00:44 2015] Warning: Payload with ID : {AB8E4534-C573-4CC9-BA6A-76DD14055510} does not have an InstallDir value. Deletion of patch files (if any) may not happen.
[Thu Feb 26 20:00:44 2015] Deleting the paylaod: {AB8E4534-C573-4CC9-BA6A-76DD14055510} from the table ribs_payload and other associated tables for payloads
[Thu Feb 26 20:00:44 2015] Removing content of Product : AdobeMotionPicture CS4, Version : 2.0
[Thu Feb 26 20:00:45 2015] Warning: Payload with ID : {D798A6B1-4964-4B96-A032-3E29C8344C2F} does not have an InstallDir value. Deletion of patch files (if any) may not happen.
[Thu Feb 26 20:00:45 2015] Deleting the paylaod: {D798A6B1-4964-4B96-A032-3E29C8344C2F} from the table ribs_payload and other associated tables for payloads
[Thu Feb 26 20:00:45 2015] finished updating installState
[Thu Feb 26 20:00:45 2015] Deleting session: adbeadbeadbeadbeadbeadbeadbeadb from ribs_collection and other associated tables
[Thu Feb 26 20:00:45 2015] Updating caps schema pcd_meta to 2 if earlier version is less than 2
[Thu Feb 26 20:00:45 2015] ..
[Thu Feb 26 20:00:45 2015] Entries from the installer database have been removed
[Thu Feb 26 20:00:45 2015] Sessions folder will be removed.
[Thu Feb 26 20:00:45 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:45 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:45 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:45 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:45 2015]
[Thu Feb 26 20:00:45 2015]
[Thu Feb 26 20:00:45 2015] List of products installed on this machine
[Thu Feb 26 20:00:45 2015] Listing products for cleanup:
[Thu Feb 26 20:00:45 2015] Please enter the option number of the product you wish to remove; enter (q) to quit ... >>
[Thu Feb 26 20:00:50 2015] Are you sure you want to clean all the listed products and associated files?
[Thu Feb 26 20:00:50 2015] Type (y) to confirm and remove or (n) to quit ... >>
[Thu Feb 26 20:00:55 2015] Please wait for Adobe Creative Cloud Cleaner Tool to finish........
[Thu Feb 26 20:00:55 2015] :: Cleaning-up left over inventories ::
[Thu Feb 26 20:00:55 2015] Inventory: 'uninstallts', Type: RIBS, Action: Delete
[Thu Feb 26 20:00:55 2015] Atleast one Non-RIBS Inventory : False, Atleast one AAMRef: False
[Thu Feb 26 20:00:55 2015] ::Start:: Removing AUM contents
[Thu Feb 26 20:00:55 2015] Deleting registry root:HKLM key:Software\Microsoft\Windows\CurrentVersion\Run value:AdobeAAMUpdater-1.0
[Thu Feb 26 20:00:55 2015] Exception during deleting key : (2, 'RegDeleteValue', 'The system cannot find the file specified.')
[Thu Feb 26 20:00:55 2015] Deleting registry root:HKLM key:Software\Microsoft\Windows\CurrentVersion\Run value:ADOBE_UPDATER_STARTUP_UTILITY
[Thu Feb 26 20:00:55 2015] Exception during deleting key : (2, 'RegDeleteValue', 'The system cannot find the file specified.')
[Thu Feb 26 20:00:55 2015] Deleting scheduled task : AdobeAAMUpdater-1.0-SamHomePC-Sam
[Thu Feb 26 20:00:55 2015] Executing command: schtasks /delete /TN "AdobeAAMUpdater-1.0-SamHomePC-Sam" /F
[Thu Feb 26 20:00:55 2015] ERROR: The system cannot find the file specified.
[Thu Feb 26 20:00:55 2015] Deleting scheduled task : AdobeUpdater Task-SamHomePC-Sam
[Thu Feb 26 20:00:55 2015] Executing command: schtasks /delete /TN "AdobeUpdater Task-SamHomePC-Sam" /F
[Thu Feb 26 20:00:55 2015] ERROR: The system cannot find the file specified.
[Thu Feb 26 20:00:55 2015] ::Finish:: Removing AUM contents
[Thu Feb 26 20:00:55 2015] ::Start:: Removing OOBE
[Thu Feb 26 20:00:55 2015] Executing command "taskkill /F /FI "IMAGENAME eq AAM Updates Notifier.exe""
[Thu Feb 26 20:00:55 2015] INFO: No tasks running with the specified criteria.
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] ::Finish:: Removing OOBE
[Thu Feb 26 20:00:55 2015] Removing content of Product : CS5Installer, Version : CS5
[Thu Feb 26 20:00:55 2015] Deleting file : C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
[Thu Feb 26 20:00:55 2015] File does not exist: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] LOG FILE SAVED TO: C:\Users\Sam\AppData\Local\Temp\Adobe Creative Cloud Cleaner Tool.log
[Thu Feb 26 20:00:55 2015] Adobe Creative Cloud Cleaner Tool completed successfully
[Thu Feb 26 20:00:55 2015]
[Thu Feb 26 20:00:55 2015] *-*-*-*-*-*- ::START:: - SUMMARY OF Warnings -*-*-*-*-*-*
[Thu Feb 26 20:00:43 2015] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Thu Feb 26 20:00:45 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:45 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:45 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:45 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] *-*-*-*-*-*- :: END :: - SUMMARY OF Warnings -*-*-*-*-*-*
[Thu Feb 26 20:00:55 2015] ---------------------------------------------------------
[Thu Feb 26 20:00:55 2015] *=*=*=*=*=*=*=*=* :: End Session :: *=*=*=*=*=*=*=*=*=*=*
[Thu Feb 26 20:00:55 2015] ---------------------------------------------------------

Hi Peter,
I'm guessing it might have been a network corruption problem. She brought in her laptop, we made another .idml file and loaded it to a USB stick, then transferred it to my computer. The file opened just fine. And yes, she had pasted all her images, so we have her collecting the bits and pieces for me to review and relink everything. I believe I have the patch, but will double-check. Thanks!

Can't open a file exported from Quicken, in Appleworks 6.2.9 Spreadsheet:

n Quicken,
File Export gives 2 format choices - Plain Text; MS Excel.
choosing MS Excel results in file with .slk extension.
To open from desktop, Finder has no recommended applications.
from Choose Application, Appleworks 6 is not allowed.
TextEdit is allowed; produces a text file.
In Appleworks,
File Open, for SS type and All Available file formats, produces a listing
(like text file, not a SS); uses Textedit for some reason.
Open, for SS type and Excel Win 5 format, shows the .slk file available,
choosing Open causes Appleworks to quit; Try Again doesn't help.
Somehow, changed extension to .xls Appleworks still quits;
now what?? I could do this with an old version of Quicken and Clarisworks

Welcome to Apple Discussions jimeast
I don't have the option of exporting as other than a Quicken file type in Quicken 2005 that I can see. I'd suggest exporting as a plain text file. That should maintain the tabs between fields. You can then open it as a spreadsheet through the AppleWorks Open dialog or drag & drop the text file icon on a new, blank spreadsheet.

No Video/Only Audio On .mov files exported from Final Cut

I've exported some .mov files from Final Cut on another computer, moved them to this one, and only the audio will play when I try to play them in any program. QuickTime, VLC, MPEG Streamclip, Real Player--nothing will play the video. I either get a black screen or a white screen. I even tried converting a portion of the video to a different file type to see if that could work.
Anyone know what I could do?

Yes, you are correct--it does play fine on the computer I originally had the file on. But I just checked and I do have perian already.
I'm wondering--I exported the file in Final Cut Pro 6, and on my computer I only have Final Cut Pro 5. Could that possibly have any effect on why it might not be working?

Cannot open .mov files exported from FCP X 10.0.9

Similar Messages

Maybe you are looking for