Cannot open msi clock and msi info

hi i am having some small problems with my
mx440-td8x.. when i open the properties for the card i cant open the options msi information and the msi clock. it says: error when the file f:´WINNITsystem32desk.cpl for the controlpanel was opening. what shal i do to fix it?

Guys,
You could go get the latest nVidia Detonator4 Drivers from the nVidia Website. Then you can delete the file msicpl.dll from your Windows directory.
For the extra features:
Use notepad to make a new file and put in it what I quoted below and then save it with the .reg extension.
Quote
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESOFTWARENVIDIA CorporationGlobalNVTweak]
"Coolbits"=dword:ffffffff
"NvCplEnableAGPSettingsPage"=dword:00000001
"NvCplEnableAdditionalInfoPage"=dword:00000001
"NvCplEnableClearViewPage"=dword:00000001
Double Click on it and it will make an entry into your registry.
That will open all the extra options in the Detonator4 Drivers including the Core and RAM Speeds for your GF4.
Take Care,
Richard

Similar Messages

I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start M

I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start Menu, Task Manager, System Tray, or anywhere else. When I try to open a file, the site tells me Flash player is not installed. I have even downloaded it to a separate folder and ran the install with IE shut down completely. And Shockwave in ENABLED but in 32 bit .I have been trying to get this to work for about 3 weeks now. HELP!!!

Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.

Having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

Hi George ,
Is it happening with all the PDF' or any specific one?
Could you please share the error message so that we can replicate at our end ?
Try repairing reader once and see if that fixes the issue.
Launch Reader>Navigate to Help>Repair Adobe Reader Installation
Regards
Sukrit Dhingra

HT201401 cannot open the menu and cannot even turn it off, the white apple image is displayed on the screen. how can i get into the menu?

cannot open the menu and cannot even turn it off, the white apple image is displayed on the screen. how can i get into the menu?

Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears - ignore the red slider.

Cannot open apps iPhoto and Aperture after updates

Cannot open apps iPhoto and Aperture after updates. I'm operating ML on mbpro. Now apps will not open. Simply that.

Not simple, if as ML implies you are running Mountain Lion! If you only mean Lion, then it would be useful for you to open another User Account, and as that User test to see if either app will launch?
Ernie

I have an ipad air and I'm trying to play a video I purchased from iTu and it says cannot open not supported and the codec says protected. How do I fix?

I have an ipad air and I'm trying to play a video I purchased from iTu and it says cannot open not supported and the codec says protected. How do I fix?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: mailto:[email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
https://reportaproblem.apple.com/
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702?viewlocale=en_US&locale=en_US
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Getting Refunds for your iTunes Store Purchases
http://www.labnol.org/software/itunes-app-store-refunds/13838/
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

Cannot open compressed folders and adobe flash player compatible files

cannot open compressed folders and adobe flash player compatible files

This is a Windows setting. In Windows 7 you can change it through the Control Panel: Either Start>Default Programs or Start>Control Panel>Programs>Default Programs>Set Associations
Find .pdf and change it (click Change Program) from Microsoft Word to Adobe Reader. Browse to find the Reader application if necessary: Program Files>Adobe>Reader11>Reader>AcroRd.exe

Desp.cpl error opening MSI Info tab...

I've just installed MSI 45.33 drivers for my FX5600-VTDR128 card under Win2K SP4... This is from a clean install of the operation system and before installing the drivers the video was the default "standard VGA" you get during the win2K install...
The drivers work using directx diagnostics but when ever I go into the display properties dialogue and attempt to select the MSI Information tab I get the error dialogue:
"An error occurred while Windows was working with the Control Panel file D:\Winnt\system32\desk.cpl"
Anyone know how to fix this?
Thanks
Dave

Richard,
Unfortunatly because of problems getting my TV card to work I have to use the more recent MSI drivers than the currently available Nvidia reference drivers...
One thing I've noticed is that the desk.cpl file was one of the items updated in Win2K SP4... I might have to see if replacing it with an earlier version removes the problem. Anyway the MSI info tab being non viewable isn't that big a hassel so if I can't fix it I should be able to live with it...
BBFN
Dave

I have installed a trail version of FrameMaker 12 and cannot open the book and chapter files in FrameMaker 8

Hi
My colleague and I use FrameMaker 8 but I'm considering whether it would be a good idea to upgrade to FrameMaker 12. So today I installed a trail version of FrameMaker 12.
Before opening a book file in FM12, I copied it to another folder so I wouldn't mess up anything. Unfortunately, I forgot to copy the chapter files so I opened most of them from FM12. As soon as I found out about it, I copied them to the new folder, but too late.
Now I'm not able to open the original files from FM8 (and even worse, neither can my colleague). I read somewhere else, that I should save the book file in the .MIF format (I tried both 12 and 7.0) and then open it from FM8. I tried that, but I still cannot open the chapter files.
I get an error message saying: "Althoug xxx.fm appears to be a FrameMaker document, it can't be opened with this release of the product".
I didn't make any changes to the chapter files when I looked at them in FM 12.
What should I do? I case we decide not to upgrade, we will not be able to access this book which is a big problem. I already have some small changes that have to be made.
Thanks in advance for your help!

Back saving to MIF should work, but it’s probably faster to just retrieve a backup of the FM8 files & books and restore them over your botched FM12 versions. Then take a copy of that backup and put it on the trial machine to play away without impacting anything else.

Cannot open registry key and /usr/bin/lib: invalid option --N patch 7237313

Hi,
I am trying to install autoconfig TXK patch 7237313 for cloning an EBS 12 on windows server 2003.
When I run adpatch it returns 2 errors:
*1 -*
setEnvAdrelink: Error: Cannot open registry key:
SOFTWARE\ORACLE
*2 -*
Relinking module 'CONCSUB.exe' in product fnd ...
gnumake -f E:/oracle/PROD/apps/apps_st/appl/admin/PROD/out/link_fnd_2548.mk E:/o
racle/PROD/apps/apps_st/appl/fnd/12.0.0/bin/CONCSUB.exe
Starting link of fnd executable 'CONCSUB.exe' on Fri Feb 5 09:25:07 SAST 2010
/usr/bin/lib: invalid option -- N
Try `/usr/bin/lib --help' for more information.
E:/oracle/PROD/apps/apps_st/appl/admin/PROD/out/link_fnd_2548.mk:2901: warning:
overriding commands for target `E:/oracle/PROD/apps/apps_st/appl/fnd/12.0.0/bin/
CMDCART.dll'
E:/oracle/PROD/apps/apps_st/appl/admin/PROD/out/link_fnd_2548.mk:752: warning: i
gnoring old commands for target `E:/oracle/PROD/apps/apps_st/appl/fnd/12.0.0/bin
/CMDCART.dll'
E:/oracle/PROD/apps/apps_st/appl/admin/PROD/out/link_fnd_2548.mk:2948: warning:
overriding commands for target `E:/oracle/PROD/apps/apps_st/appl/fnd/12.0.0/bin/
FNDRTR45.exe'
E:/oracle/PROD/apps/apps_st/appl/admin/PROD/out/link_fnd_2548.mk:1333: warning:
ignoring old commands for target `E:/oracle/PROD/apps/apps_st/appl/fnd/12.0.0/bi
n/FNDRTR45.exe'
link.exe -MAP:E:/oracle/PROD/apps/apps_st/appl/fnd/12.0.0/bin/CONCSUB.map -NODEF
AULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup -OUT:E:/oracle/PROD/app
s/apps_st/appl/fnd/12.0.0/bin/CONCSUB.exe E:/oracle/PROD/apps/apps_st/appl/fnd/1
2.0.0/lib/fdpocr.obj \
E:/oracle/PROD/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib E:/oracle/PR
OD/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib E:/oracle/PROD/apps/tech_st
/10.1.2/precomp/lib/msvc/orasqx10.lib E:/oracle/PROD/apps/tech_st/10.1.2/RDBMS/l
ib/oraclient10.lib E:/oracle/PROD/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
E:/oracle/PROD/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib E:/oracle/PROD/apps/
tech_st/10.1.2/NETWORK/lib/oran10.lib E:/oracle/PROD/apps/tech_st/10.1.2/NETWORK
/lib/oranl10.lib E:/oracle/PROD/apps/tech_st/10.1.2/lib/oranls10.lib E:/oracle/P
ROD/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB /LIB/OLDNAMES.LIB /P
latformSDK/LIB/KERNEL32.LIB /PlatformSDK/LIB/USER32.LIB /PlatformSDK/LIB/ADVAPI3
2.LIB /PlatformSDK/LIB/WINSPOOL.LIB /PlatformSDK/LIB/COMDLG32.LIB /PlatformSDK/L
IB/GDI32.LIB /PlatformSDK/LIB/VERSION.LIB
link: invalid option -- M
Try `link --help' for more information.
gnumake: *** [E:/oracle/PROD/apps/apps_st/appl/fnd/12.0.0/bin/CONCSUB.exe] Error
1
Done with link of fnd executable 'CONCSUB.exe' on Fri Feb 5 09:25:08 SAST 2010
Relink of module "CONCSUB.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/PROD/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
egrep version is 2.5.1 and gnumake is 3.80.
please help,
regards,
Hassane Cabir

Hi,
Are the application services down?
setEnvAdrelink: Error: Cannot open registry key:
SOFTWARE\ORACLEyes, the services are down, using adstpall.cmd and Maintenance mode enabled using adadmin.
Get the version 3.80-1 of the make file -- See (Note: 414992.1 - Using Cygwin to Maintain Oracle E-Business Suite Release 12 on Windows).The make is already 3.80-1.
regards,
Hassane Cabir

I have purchased a new Mac power book 10.9.2. I cannot open illustrator CS4 and get the error message 150:30. Can you help?

I have purchased a new Mac power book 10.9.2. I cannot open adobe illustrator CS4 and get the error message 150:30. Can you help?

You are welcome, Sharon.
You should be aware that the newest version, CC, is only available as a subscription.
CS6 can be purchased at Adobe, or second hand, see below.
Older versions such as CS5 can only be bought second hand, with a licence transfer through Adobe, requiring that the licence has not been used as a basis for an upgrade.

TS3276 I cannot open my mailbox and I cannot quit it, therefore I cannot shut down my computer. what do I do?

I cannot open my mailbox, I cannot QUIT it, and therefore my computer will not shut down. What do I do?

You can't Force Quit it?

I cannot open app store and safari

I need help with my imac, i cannot open app store or safari, there is no software update option when i click on the apple. I recently upgraded to Yosemite. I also did clean my imac. What shall i do? thanx.

Turn off proxies, if selected.
     System Preference > Network > Advanced > Proxies Tab
     Under "Select Protocol", uncheck any box if selected.
     Click "OK" then "Apply”.

I suddenly cannot open my mailbox AND my computer won't shut down because the mailbox is open - it won't open OR close!

I suddenly cannot open my mailbox. When I tried to restart my computer (thinking THIS might help), I get the message "The application Mail canceled shut down." Any ideas? Thank you!

Right click the Mail icon in the dock, then click option to force quit the mail program.

Cannot find errors -200222 and -200141 info

Hello,
I have sometimes run time errors -200222 and -200141 after executing my program for several hours. I tried to find extra information about these errors, but I cannot locate them in Labview 7.1 help, NI-DAQmx help, or ni.com web and forums.
How can I find detailed info about them (what usually produces them, possible workarounds)? Where are they generated? I guess, from the following links, that they come from the NI-DAQmx driver:
http://digital.ni.com/public.nsf/websearch/8A0E097385A4269586256DBA0054E668?OpenDocument
http://digital.ni.com/public.nsf/allkb/001DA4DB6A31CF8886256D33006FA857
But my errors are not listed on those links. And error ranges in labview don´t contain these two codes.
I´m specially concerned about error -200222 because it says "acquisition stopped", and my program is going for a field pilot in a couple of days, with 24x5 execution time. I cannot reproduce the conditions that origin the error nor find information about in the help, the web or forums. I can only wait them again to occurr or get your help.
Thanks in advance
Antonio López

Hi Garett,
You can view the log file directly in DIAdem-SCRIPT, it's the bottom-most window with the gray background. I always have to scroll up a few lines to see the error, and usually there are two or three error events stored in the log file each time the DataPlugin fails to load. The last event, located at the bottom, almost always contains no useful information for DataPlugin debugging. You have to find the first event by scrolling up to find a reference to a line number in the DataPlugin which caused the error.
Also note that the DataPlugin will throw an error if it runs through just fine but does not load any data. In other words, if you are building up your DataPlugin step by step (as you should), and are just at the early stages where you parse a few items in the file and look at their values, you can easily forget to create at least 1 group or channel. If the DataPlugin does not create at least 1 group or channel when it runs through, it will throw an error that the data loading failed, when really there is no error in the DataPlugin beyond that it loaded nothing.
I like to output metadata values I'm parsing from the binary or header file as group properties when I'm building up the DataPlugin step by step, like this:
Set ThisGroup = Root.ChannelGroups.Add(ThisGroupName)
ThisGroup.Properties.Add MetaDataName, MetaDataValue
Then I can look at a long list of metadata values in the Data Portal, and I never forget to load at least 1 group or channel in order to avoid that pesky error that nothing was loaded by the DataPlugin. You can also do the same thing with channel properties, of course:
Set ThisChannel = ThisGroup.Channels.AddImplicitChannel(Name, 0, 1, 2, eI32)
ThisChannel.Properties.Add MetaDataName, MetaDataValue
Let us know if this doesn't help with your current issue,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Cannot open msi clock and msi info

Similar Messages

Maybe you are looking for