Cannot Open Oracle XE DB-Homepage

After installing Oracle 10g XE on a Windows XP Pro, I can't open the DB Homepage.
I miss the listening process for port 8080.
I've got no problems on another XP Installation on my Laptop, but it does not work on my workstation
The services are running and I checked the HTTPPORT with gethttpport. It is port 8080.
How can I start the listening process for that port? Or does anybody has a other solution? I allready tried to change the port too, but still no Homepage.

at my Notbook I have this connections
Aktive Verbindungen
Proto Lokale Adresse Remoteadresse Status PID
TCP 0.0.0.0:1029 0.0.0.0:0 ABH™REN 580
[ORACLE.EXE]
TCP 0.0.0.0:1521 0.0.0.0:0 ABH™REN 2168
[tnslsnr.exe]
TCP 127.0.0.1:1025 0.0.0.0:0 ABH™REN 2168
[tnslsnr.exe]
TCP 127.0.0.1:8080 0.0.0.0:0 ABH™REN 2168
[tnslsnr.exe]
TCP 127.0.0.1:1075 127.0.0.1:1521 HERGESTELLT 580
[ORACLE.EXE]
TCP 127.0.0.1:1521 127.0.0.1:1075 HERGESTELLT 2168
[tnslsnr.exe]
TCP 192.168.178.26:1179 192.168.178.26:1180 HERGESTELLT 580
[ORACLE.EXE]
TCP 192.168.178.26:1180 192.168.178.26:1179 HERGESTELLT 2168
[tnslsnr.exe]
here there is no problem, with the homepage
at my Workstation I have this connections
Aktive Verbindungen
Proto Lokale Adresse Remoteadresse Status PID
TCP 0.0.0.0:1521 0.0.0.0:0 ABH™REN 5988
[tnslsnr.exe]
TCP 127.0.0.1:2180 0.0.0.0:0 ABH™REN 5988
[tnslsnr.exe]
TCP 127.0.0.1:2180 127.0.0.1:3466 HERGESTELLT 5988
[tnslsnr.exe]
TCP 192.168.178.21:1521 192.168.178.21:2295 HERGESTELLT 5988
[tnslsnr.exe]
TCP 192.168.178.21:2295 192.168.178.21:1521 HERGESTELLT 3668
[ORACLE.EXE]
TCP 192.168.178.21:1689 192.168.178.21:1521 FIN_WARTEN_2 3200
[System]
TCP 192.168.178.21:1695 192.168.178.21:1521 FIN_WARTEN_2 3200
[System]
TCP 192.168.178.21:2189 192.168.178.21:1521 FIN_WARTEN_2 3200
[System]
here I have Problems with the Homepage !! ??
What could be the problem here? If I check the port with netstat I find no port 8080

Similar Messages

Forms9i: Cannot open Oracle*Terminal file: fmrweb.

Hi there,
Anyone who knows what to do about the error message "Cannot open Oracle*Terminal file: fmrweb" when trying to compile and run a form in Forms9i ?? I have found a few files named fmrweb*.* in the D:\OraHome\Forms90 directory. What can I do ???
Thanks for your help.
Cheers ...Jesper ( [email protected] )

hi jesper,
U must have been working with forms either design or run mode.
U have to close the application before oracle terminal can be effective.
restart forms desgin/run mode after u have registered the changes made in the oracle terminal file.
(resp. *.res)

When opening FF I gert the message "Can not initiate the security component of this programm"When I continue I cannot open any website except my own homepage.

Below you can find the complete message (in Dutch) that I receive "Kan de beveiligingscomponent van de toepassing niet initialiseren. De meest waarschijnlijke oorzaak is problemen met bestanden in de profielmap van uw toepassing. Controleer of deze map geen lees-/schrijfbeperkingen heeft en uw harde schijf niet vol of bijna vol is. Het wordt aangeraden de toepassing af te sluiten en het probleem op te lossen. Als u doorgaat met deze sessie, is het mogelijk dat u onjuist gedrag van de toepassing ziet bij het aanspreken van de beveiligingsfuncties."I cannot open any website except my homepage. There is ample space on my hard disk

See also https://support.mozilla.org/kb/Could+not+initialize+the+browser+security+component
Rename secmod.db (secmod.db.old) in the Firefox Profile Folder in case there is a problem with the file.<br />
You may have to rename cert8.db (cert8.db.old) as well.
Firefox will create new files.
The "Application Data" folder in XP/Win2K and the "AppData" folder in Vista/Windows 7 are hidden folders.
*http://kb.mozillazine.org/Show_hidden_files_and_folders

I am playing in Pogo and cannot open the games even though the homepage and others will open. The message is THE CONNECTION WAS RESET WHILE THE PAGE WAS LOADING. How do I fix this???

I am playing in Pogo and cannot open the games even though the homepage and others will open. The message is THE CONNECTION WAS RESET WHILE THE PAGE WAS LOADING.
All my friends are playing and it seems I am the only one have this problem.

The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]]

Cannot open favourites using the Firefox tag that usually opens up the menu and a new page.. Now I get the dropdown menu but cannot open a new page, losing the homepage every time I explore, can you say WHY? all other versions worked fine!

I cannot open a new page from the Firefox favorites menu, it worked before in other versions and this new 5.1 version, but stopped working a few days ago, uninstalled, downloaded a fresh program.. same problem exists. I usually leave my 'Home Page' as a stable page and just open 'new' pages for i.e. Google, Internet Banking etc. the '+' sign on my home page or other loaded pages does not operate, hate having to now constantly sign in to my hotmail home page if and when I open new pages, can you help?

Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
* http://kb.mozillazine.org/Cookies

Cannot access Oracle XE database home page

Hi
I have just installed Oracle Database 10g express edition on my Windows XP, and the installation seemed to go well.
I then select to go to the database home page after the installation which opens a browser at this address: http://127.0.0.1:8080/apex, and i get a The page cannot be displayed' error.
During the install, i was given this information:
Destination Folder: C:\oraclexe\
Port for 'Oracle Database Listener': 1521
Port for 'Oracle Services for Microsoft Transaction Server': 2030
Port for HTTP Listener: 8080
I have tried restarting my computer, but still get the cannot find server error when attempting to go to the database home page.
I was wondering if anyone else has had experience with this issue, where they cannot get to the database homepage, and how they may have solved it.
I also have disabled my firewall. but still could not access Home Page.
Any help would be greatly appreciated.
many thanks
Philip.

Hi,
when i tried to conenct through sql command line, this is what i got:
SQL> connect sys as sysdba
Enter password:
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file 'C:\oraclexe\app\oracle\product\10.2.0\serv
er\dbs/spfileXE.ora'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
SQL>
even though the database is already started and i see the service running fine.
Philip.

Oracle 10g database homepage not working?

Oracle 10g database homepage not working?
Hi just i installed oracle database 10g express edition but after the restart the oracle database homepage wont open http://127.0.0.1:8080/apex that link always telling cannot display...
here i have posted lsnrctl status
pls help
thanks in advance
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY…
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-SEP-2010 17:52:11
Uptime 0 days 1 hr. 28 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\se…
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\se…
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIP…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOS…
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully

I had a problem of accessing Oracle 10g database homepage. After a couple of days of research and discussions with coworker we found a solution.
Here is the solution:
1. Find out your default browser.
2. Configure your default web browser to connect to the Oracle Database XE Database Home Page as stated
here:
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#CIHHJEHF
If this does not help de-install Oracle XE and reinstall following the instruction. During re-installation find out your default browser and configure it as instructed.
I suspect when the default web browser changes the Oracle 10g XE Database Home Page stops working.
Good luck

Oracleorcl: error while loading shared libraries: libaio.so.1: cannot open

Hi,
I installed Oracle 10g on RHLinux AS4. I created a initOEMREP.ora file
in $ORACLE_HOME/dbs.
my .bash_profile file is,
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
#Added on 05-feb-2008
#For oracle1g db installation
export ORACLE_SID=OEMREP
export ORACLE_BASE=/home/app/oracle10gdb
export ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1
export PATH=$ORACLE_HOME/bin:$PATH:.
export LD_LIBRARY_KERNEL=$ORACLE_HOME/lib
export TNS_ADMIN=$ORACLE_HOME/network/admin
export TMP=/home/tmp
export TMPDIR=/home/tmp
While
$sqlplus "/as sysdba"
I am getting
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Feb 6 21:27:08 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
oracleorcl: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
Please help me to solve this.
Regards,
Mathew

Hi,
THank you for the replay. Where will I get this package?
Regards,
Mathew.

Oracleoracle: error while loading shared libraries: libodm9.so: cannot open shared ob

Hi,
I'm installing Oracle 9i on IA 64, OS linux. I keep getting the following error when I run sqlplus
oracleoracle: error while loading shared libraries: libodm9.so: cannot open shared object file: No such file or directory
ERROR:
ORA-24314: service handle not initialized
the LD_LIBRARY_PATH=$ORACLE_HOME/lib
is set in the environment. After this error it prompts me for a user name?
Regards

Hi Ruben
Before starting please make sure you have maintained all env for sidadm
commands may vary depending on os in case
Whenever I start SAPINST I set following before hand
TMPDIR=/usr/sap/install/SRA_CI : just a log directory
export TMPDIR
LD_LIBRARY_PATH=/usr/sap/sapmnt/SRA/exe
export LD_LIBRARY_PATH
umask 022
JAVA_HOME=/usr/sap/java
export JAVA_HOME
PATH=$/bin:$
export PATH
SAPINST_JRE_HOME=/usr/sap/java
export SAPINST_JRE_HOME
Hope this helps
success!!

Svcadm: error while loading shared libraries: libz.so.1: cannot open shared

Ops center 12c installation last stage we are getting below error :
INFO: starting new satellite SMF services
satadm: Enable HTML redirect
satadm: Disabling application/scn/ec-server-splashpage
/opt/sun/xvmoc/bin/svcadm: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
satadm: ERROR: application/scn/ec-server-splashpage failed to stop
satadm: Starting Enterprise Controller with SMFlite...
svcadm: error while loading shared libraries: libz.so.1: cannot open shared object file: No such file or directory
satadm: ERROR: Error enabling Enterprise Controller run-time milestone svc:/application/scn/satellite-enable:default (rc=127)
Error: starting satellite services
Command: /opt/sun/xvmoc/bin/satadm start -v -w
Exit code: 1
Output:
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.14112.
t. Try this step again (correct the failure before proceeding)
x. Exit

Hi Valentin
The copy error occurs when you try to copy the files to the main OS that has allocated the VM ?
Because another option is to get those files toward the VM across and ftp server. You could use
an ftp server installed in the main machine or in the network where you are connected o inclusive from
your mail if you have connection to internet.
Joel Perez
Oracle Ace Member
DBA Oracle

Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AM

a step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

Error while loading shared libraries: libaio.so.1: cannot open share

Hi
when i try to install Oracle Management Agent 11g using Deployment wizard to one of our hosts, it fails with the following error:
error while loading shared libraries: libaio.so.1: cannot open shared object file:
i have changed LD_LIBRARY_PATH to various other options but no luck.
can some one please advice on this.
OS version is Red Hat Enterprise Linux AS release 4 (Nahant Update 7) 64bit
thanks in advance

Hi...
check if you have all packages ...
libaio-XX-.x86_64
libaio-32bit-XX-.x86_64
libaio-devel-XX-.x86_64
libaio-devel-32bit-XX-.x86_64
XX = version number...
*T

Cannot open shared object file: on Informatica Power Centre(8.1.1) Installa

Hi Friends,
I am trying to install Informatica Power Centre 8.1.1 and when i invoke the installet it' giving below error:
My OS is Redhat Linux (64 bit).
What's the issue?
onfiguring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.28135/Linux/resource/jre/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[oracle@obidb PowerCenter_8.1.1_SE_for_Linux_x64_64Bit]$
Regards,
DB

Hi;
I am in the process of installing R12.1.1 on RHEL5(64-bit). All the pre-req have been done.. I did the installation twice but I am facing the same issue. When i try to run adconfig.sh on the appsTier. i get the following errorYou want to run adconfig.sh on appstier or dbtier?
If you run appstier be sure you source env file with applmgr user
Regard
Helios

Cannot open shared object file: on Informatica Power Centre Installation

Hi Friends,
I am trying to install Informatica Power Centre 8.1.1 and when i invoke the installet it' giving below error:
My OS is Redhat Linux (64 bit).
What's the issue?
onfiguring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.28135/Linux/resource/jre/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[oracle@obidb PowerCenter_8.1.1_SE_for_Linux_x64_64Bit]$
Regards,
DB

Hi;
I am in the process of installing R12.1.1 on RHEL5(64-bit). All the pre-req have been done.. I did the installation twice but I am facing the same issue. When i try to run adconfig.sh on the appsTier. i get the following errorYou want to run adconfig.sh on appstier or dbtier?
If you run appstier be sure you source env file with applmgr user
Regard
Helios

Cannot open 2 Virtual Machines at the same time to access the same Database

Folks,
Hello.
I am installing Oracle Database 11gR2 RAC system using 2 Virtual Machines (rac1 and rac2) on the top of VMPlayer 3.
The VM rac1 and rac2 run correctly when one of them is shutdown.
Their locations are F:\VM_RAC\rac1 and F:\VM_RAC\rac2.
While rac2 is running, I open rac1. But this error message comes up:
Error: "Cannot open the disk F:\VM_RAC\sharerac\asm1.vmdk or one of snapshot disks it depends on. Reason: failed to lock the file."
While rac1 is running, I open rac2. But this error message comes up:
Error: "Cannot open the disk F:\VM_RAC\sharerac\asm1.vmdk or one of snapshot disks it depends on. Reason: failed to lock the file."
The 2 error messages are the same. This means I cannot open 2 VMs rac1 and rac2 at the same time. When we run RAC system, we have to open 2 machines or more than 2 machines at the same time so that all machines can access the same Database Server.
My question is:
Can any folk tell me how to have rac1 and rac2 run at the same time ?
Thanks.

You need to disable disk locking, which ordinarily is performed by the first VM to prevent any other VMs from corrupting your vmdk files via uncoordinated writes. You will have to shutdown both of your VMs and edit the *.vmx flat file for each, adding lines like the following (settings taken from workstation 6, but should be nearly identical settings for VM Player 3.x):
http://crosbysite.blogspot.com/2007/10/clustering-in-vmware-workstation-6.html
scsi1.sharedbus = "Virtual"
disk.locking = "false"
diskLib.dataCacheMaxSize = "0"
diskLib.dataCacheMaxReadAheadSize = "0"
diskLib.dataCacheMinReadAheadSize = "0"
diskLib.dataCachePageSize = "4096"
diskLib.maxUnsyncedWrites = "0"
A few comments:
- your shared disks (scsi1) must be on a separate virtual scsi bus than the boot disk (scsi0), to allow setting the sharedbus flag as seen above.
- you must also ensure the cache parameters and unsynced writes settings are set to guarantee that all IO is immediately flushed to the vmdk file so the other VM can immediately access the latest version of data.

Cannot Open Oracle XE DB-Homepage

Similar Messages

Maybe you are looking for