Cannot open persistence.xml nor orm.xml

I had to kill JDev process after I realized Data Control could not be created on a session EJB since application was not created with JSF,EJB technology. JDev kept trying to create Data Control. I left it trying over night and in the morning I killed process. I restarted JDev and tried to open files persistence.xml and orm.xml, but JDev just showed up message "Loading...Please wait." and it was stuck with that message. I could open all other files except these two XML files.
Is there a workaround?

CG_AUDIO wrote:
Has anyone been able to open a pages file that has the cannot open .xml required error?
I opened a doc from pages'08 in pages'09 made some crucial changes saved as new name and cannot open it again now.
I tried opening in '08 and of course no luck.
I just finished 3 hours of writing and cannot do that again!!!
3 hours of writing without no intermediate save in different files is silly.
Attach the file to a mail
send them to my maibox.
I will try to revive the raw text.
Click my blue name to get my address.
IMPORTANT: search for the keystring _"backup, backup"_ in existing threads !
Yvan KOENIG (VALLAURIS, France.) jeudi 20 août 2009 20:09:19

Similar Messages

I cannot open iTunes 8 nor uninstall it. Can one help?

I installed iTunes 8 on or about 9/10/08. I've used it through 9/11/08. On 9/12/08, I clicked on iTunes through the Start menu. A box then appeared which stated: "Please wait while Windows configures iTunes". This is displayed for a while until a dialog box appeared which stated:
'3C9F7B3F-D55C-42cd-8537-B878518B73AF' is not a valid short filename.
I clicked the 'OK' button. The two boxes disappeared and another box appeared which stated:
'Fatal error during installation.' (Problem with Shortcut)
I clicked 'OK' and the last box disappeared.
I've tried to uninstall iTunes 8 through the Windows utility 'Add/Remove Programs' but got the same response as I did when I tried to use iTunes. I tried to install iTunes 7.6, but I was prevented from doing so because a later version of iTunes was already installed. How can I fix this problem? How can I successfully uninstall iTunes 8?
Any help would be appreciated.

Do not respond to this instance of the question. It was placed in wrong area.

I cannot open iTunes 8 nor uninstall it.

I installed iTunes 8 on or about 9/10/08. I've used it through 9/11/08. On 9/12/08, I clicked on iTunes through the Start menu. A box then appeared which stated: "Please wait while Windows configures iTunes". This is displayed for a while until a dialog box appeared which stated:
'3C9F7B3F-D55C-42cd-8537-B878518B73AF' is not a valid short filename.
I clicked the 'OK' button. The two boxes disappeared and another box appeared which stated:
'Fatal error during installation.' (Problem with Shortcut)
I clicked 'OK' and the last box disappeared.
I've tried to uninstall iTunes 8 through the Windows utility 'Add/Remove Programs' but got the same response as I did when I tried to use iTunes. I tried to install iTunes 7.6, but I was prevented from doing so because a later version of iTunes was already installed. How can I fix this problem? How can I successfully uninstall iTunes 8?
Any help would be appreciated.

Problem resolved by disconnecting the USB flash drive.

Cannot open projects or import custom skins into RH*

Hi,
I just got a new laptop and I'm unable to open ANY projects or import custom skins into RH8. I was on 8 previously, but I cannot open my projects nor can I import skins. I click on Skins>import>choose the skin, then nothing. It's like it's not even recognizing I'm doing anything. Any suggestions?
Thanks!

If you can't open a project, how are you getting to the File > Import > Skin menu item? Also can you give us some additional information about the laptop (e.g. the OS).
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

Cannot open messages

hi.. i need help on my nokia5800 phone.
i cannot open my messages and unable to read them. I can still send txt messages. I've already tried to restart my phone but it still the same. no problem with the touch since i can still navigate and use oher function aside from opening my messages.

hello!!! Pls i need help on my nokia E-5.i cannot open my messages nor read except i synchronise with my PC.often times i have tried to read it it will bring me back to the message home screen but i can send and receive.dont know whether is applicatin problem or anytin .pls help

Files saved on memory stick on pc show as original file name followed by .XML and i cannot open why

files saved on memory stick on pc show as original file name followed by .XML for example tester.doc.XML, is there any reason? I cant open these on mac, if i put it back in PC is shows file as normal without .XML. Confused.com any ideas.

I have files on my work laptop (PC) e.g. document1.doc (word document), I then save it to my memory stick (which i have reformatted, I also tried my external disk drive) and then take that to my macbook, plug it in and in finder it then shows as document1.doc.XML, which i cannot open. It happens to all types of files, it just seems to add .XML on the end of everything.

Outlook 2013 standard error cannot open the outlook window. Invalid XML.

I have a user that tries to open outlook and gets this error.
( Cannot start microsoft outlook. cannot open the outlook window. Invalid XML, the view cannot be loaded.

Hi,
Try starting Outlook with the /ResetNavPane command.
Steps:
Open the run box (Win-button + R)
Type: outlook.exe /resetnavpane
http://wikiclouded.com/cannot-start-microsoft-outlook-invalid-xml-the-view-cannot-be-loaded/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
George Zhao
TechNet Community Support

Cannot open muse file Error Assert: "Corrupt XML in database record U1 class MuseSite"

I cannot open the .muse file. The site was saved as a .muse the saved as html and uploaded to web. Customer has a change and the .muse file will not open. The error I get is Error Assert: "Corrupt XML in database record U1 class MuseSite". How can this be fixed? What happened? Please help. I took the html version to DreamWeaver but it is very discombobulated on the design screen and strange coding on the code view. Please help, customer needs this change asap.
The error from the muse log is :
Build 8: Sun Jun 9 12:23:11 2013 UTC: Assert: Corrupt XML in database record U1 class MuseSite-DataBase/createPersistFromDataBaseRecord+DataBase/instantiate+DataBase/getRootPe rsist+DocumentConversion$/runConversion+DataBase/open+MuseSite$/openSite+NativeOpenProvide r/openThisFile+MuseImportManager/processFile+MuseImportManager/selectMultipleFilesHandler+ end stack
Build 8: Sun Jun 9 12:23:11 2013 UTC: EXCEPTION:TypeError: Error #1095: XML parser failure: Unterminated attribute.-DataBase/createPersistFromDataBaseRecord+DataBase/instantiate+DataBase/getRoot Persist+DocumentConversion$/runConversion+DataBase/open+MuseSite$/openSite+NativeOpenProvi der/openThisFile+MuseImportManager/processFile+MuseImportManager/selectMultipleFilesHandle r+end stack

I sent you the file and the info concerning where the file was stored via email. I am posting that info here as well.
You Asked:
The object that's reporting as damaged is a very important one. We may, or may not, be able to repair the file.
Was the file stored in a shared folder (i.e. Dropbox, Creative Cloud Files, Box, etc.)? No
Was it stored on a file server that was accessed from two separate copies of Muse? No
The file was stored on my personal Network Storage unit utilizing an Intellinet NAS with 2 1.5TB drives in a raid array. The file was created on a Mac Pro v 10.6.8
Model Name:    Mac Pro
Model Identifier:    MacPro4,1
Processor Name:    Quad-Core Intel Xeon
Processor Speed:    2.66 GHz
Number Of Processors:    1
Total Number Of Cores:    4
L2 Cache (per core):    256 KB
L3 Cache:    8 MB
Memory:    8 GB
Processor Interconnect Speed:    4.8 GT/s

Cannot open files, "index.xml file is missing". ???

I cannot open files, the message "idex.xml file is missing" shows up. What to do?

Do a search in this forum for required index.xml file is missing. It's not really a fix because 1) if it's the playlist for a CD it's too small 2) it's blurry, and 3) you mean this has been going on a year and nobody's fixed it?

"cannot open...required .xml" again

Has anyone been able to open a pages file that has the cannot open .xml required error?
I opened a doc from pages'08 in pages'09 made some crucial changes saved as new name and cannot open it again now.
I tried opening in '08 and of course no luck.
I just finished 3 hours of writing and cannot do that again!!!
Thanx for any help.
Jean-Michel

CG_AUDIO wrote:
Has anyone been able to open a pages file that has the cannot open .xml required error?
I opened a doc from pages'08 in pages'09 made some crucial changes saved as new name and cannot open it again now.
I tried opening in '08 and of course no luck.
I just finished 3 hours of writing and cannot do that again!!!
3 hours of writing without no intermediate save in different files is silly.
Attach the file to a mail
send them to my maibox.
I will try to revive the raw text.
Click my blue name to get my address.
IMPORTANT: search for the keystring _"backup, backup"_ in existing threads !
Yvan KOENIG (VALLAURIS, France.) jeudi 20 août 2009 20:09:19

Cannot open XML ES3

I have created a design in Adobe Indesign CS6 and want to finalize the form in Livecycle Designer ES3; however, when I open the xml in Livecycle this is the error I get. I have JRE 7 update 9 installed.
"Failed to locate the qualified Java Runtime Environment. Please install Java Runtime Environment Version 6 Update 14 (32-bit) or later."

Hi,
it seems that Designer does not recognise JRE 7.
I got the same error with this version installed.
Installing JRE 6 update 37 fixed that issue for me.
http://www.java.com/de/download/manual_v6.jsp

XML Report output giving error "word cannot open the file because....

Hi All,
Greetings!
I have a standard report, 'Payables Posted Invoice Register".
The report was going in to warning beacuse of some Invalid characters in the Data.
I corrected the invalid characters and then ran the report ; it completed fine.
But now when I try to open the report output, the output is not getting open but its allowing me to save the file.
When I save it on my local machine and try to open it, I am getting an error as "word cannot open the file because it is larger than 512 megabytes".
The document size showing is 664MB when I saved it on my machine. And the output type of the report is RTF and not PDF.
Can anybody please help?
Thanks,
Sachin

not sure, if the Microsoft word has limitation of file size.

Problem with Persistence.xml in JDev final after migration

Hi,
I am trying to migrate a current project from JDev 11gTp4 to the JDev production release. When deploying the EJB module I get the following problem though (Stack from DefaultServer.log)
weblogic.application.ModuleException: Exception preparing module: EJBModule(Nexus-NexusModel-ejb)
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:452)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:197)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:89)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:723)
     at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
java.lang.UnsupportedOperationException: This parser does not support specification "null" version "null"
     at javax.xml.parsers.DocumentBuilderFactory.setSchema(DocumentBuilderFactory.java:561)
     at weblogic.xml.jaxp.RegistryDocumentBuilder.setupDocumentBuilderFactory(RegistryDocumentBuilder.java:393)
     at weblogic.xml.jaxp.RegistryDocumentBuilder.getDefaultDocumentBuilderFactory(RegistryDocumentBuilder.java:359)
     at weblogic.xml.jaxp.RegistryDocumentBuilder.getDocumentBuilder(RegistryDocumentBuilder.java:298)
     at weblogic.xml.jaxp.RegistryDocumentBuilder.parse(RegistryDocumentBuilder.java:150)
     at org.eclipse.persistence.platform.xml.jaxp.JAXPParser.parse(JAXPParser.java:163)
     at org.eclipse.persistence.platform.xml.jaxp.JAXPParser.parse(JAXPParser.java:197)
     at org.eclipse.persistence.internal.oxm.record.DOMUnmarshaller.unmarshal(DOMUnmarshaller.java:213)
     at org.eclipse.persistence.oxm.XMLUnmarshaller.unmarshal(XMLUnmarshaller.java:309)
     at org.eclipse.persistence.internal.jpa.metadata.xml.XMLEntityMappingsReader.read(XMLEntityMappingsReader.java:72)
     at org.eclipse.persistence.internal.jpa.metadata.xml.XMLEntityMappingsReader.read(XMLEntityMappingsReader.java:112)
     at org.eclipse.persistence.internal.jpa.metadata.MetadataProcessor.loadStandardMappingFiles(MetadataProcessor.java:343)
     at org.eclipse.persistence.internal.jpa.metadata.MetadataProcessor.loadMappingFiles(MetadataProcessor.java:271)
     at org.eclipse.persistence.internal.jpa.deployment.PersistenceUnitProcessor.processORMetadata(PersistenceUnitProcessor.java:294)
     at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.predeploy(EntityManagerSetupImpl.java:830)
     at org.eclipse.persistence.jpa.PersistenceProvider.createContainerEntityManagerFactory(PersistenceProvider.java:189)
     at weblogic.deployment.PersistenceUnitInfoImpl.createEntityManagerFactory(PersistenceUnitInfoImpl.java:330)
     at weblogic.deployment.PersistenceUnitInfoImpl.<init>(PersistenceUnitInfoImpl.java:123)
     at weblogic.deployment.AbstractPersistenceUnitRegistry.storeDescriptors(AbstractPersistenceUnitRegistry.java:331)
     at weblogic.deployment.AbstractPersistenceUnitRegistry.loadPersistenceDescriptor(AbstractPersistenceUnitRegistry.java:245)
     at weblogic.deployment.ModulePersistenceUnitRegistry.<init>(ModulePersistenceUnitRegistry.java:63)
     at weblogic.ejb.container.deployer.EJBModule.setupPersistenceUnitRegistry(EJBModule.java:209)
     at weblogic.ejb.container.deployer.EJBModule$1.execute(EJBModule.java:310)
     at weblogic.deployment.PersistenceUnitRegistryInitializer.setupPersistenceUnitRegistries(PersistenceUnitRegistryInitializer.java:62)
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:376)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:197)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:89)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:723)
     at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
My persistence.xml looks like
<?xml version="1.0" encoding="windows-1252" ?>
<persistence xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd"
version="1.0" xmlns="http://java.sun.com/xml/ns/persistence">
<persistence-unit name="Nexus-ejbPU">
<provider>
org.eclipse.persistence.jpa.PersistenceProvider
</provider>
<jta-data-source>
jdbc/NexusPoolDS
</jta-data-source>
<mapping-file>
META-INF/orm.xml
</mapping-file>
<properties>
<property name="eclipselink.target-server" value="WebLogic_10"/>
<property name="eclipselink.logging.file" value="Toplink.log"/>
<property name="eclipselink.logging.timestamp" value="true"/>
<property name="eclipselink.logging.exceptions" value="true"/>
<property name="eclipselink.logging.session" value="true"/>
</properties>
</persistence-unit>
</persistence>
orm.xml looks like this
<?xml version="1.0" encoding="windows-1252" ?>
<entity-mappings xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/persistence/orm http://java.sun.com/xml/ns/persistence/orm_1_0.xsd"
version="1.0"
xmlns="http://java.sun.com/xml/ns/persistence/orm">
<persistence-unit-metadata>
<persistence-unit-defaults>
<schema>
XXX
</schema>
</persistence-unit-defaults>
</persistence-unit-metadata>
<package>
za.co.medscheme.model.persistence.xxx
</package>
<schema>
XXX
</schema>
</entity-mappings>
I have noticed that the persistence.xml file have changed quite drastically from the version we had in TP4 release during project upgrade, but can not explain the problem we are getting. I have also tried to just create a dummy project and create a persistence unit, and the file looks exactly the same afterwards. Any thoughts?
Drikus

Just thought I would add a temporary solution to the problem for those of you sitting with the same issue.
In the root folder of your application you will find a src folder with a meta-inf folder and weblogic-application.xml inside.
Add the following before the closing weblogic-application tag...
<xml>
<parser-factory>
<saxparser-factory>
weblogic.xml.jaxp.WebLogicSAXParserFactory
</saxparser-factory>
<document-builder-factory>
weblogic.xml.jaxp.WebLogicDocumentBuilderFactory
</document-builder-factory>
<transformer-factory>
weblogic.xml.jaxp.WebLogicSAXTransformerFactory
</transformer-factory>
</parser-factory>
</xml>
If there wasnt an xml tag in the file, it seems that JDeveloper somehow adds one on the fly for you pointing to an oracle xml parser that does not contain the setSchema method required by weblogic on deployment.
Hope this helps anybody else that has this problem.
Regards
Drikus Britz

Error while opening the XML file

Hi all,
i'am trying to download data from internal table to XML file with root node and its
corresponding child nodes.i have written the program in this way.
tables: mara.
include bcciixml_decl.
include bcciixml_impl.
parameters: p_matnr like mara-matnr.
start-of-selection.
data: piXML          type ref to if_ixml,
        pDocument      type ref to if_ixml_document,
        pStreamFactory type ref to if_ixml_stream_factory,
        pIStream       type ref to if_ixml_istream,
        pParser        type ref to if_ixml_parser,
        pNode          type ref to if_ixml_node,
        pText          type ref to if_ixml_text,
        string         type string,
        count          type i,
        index          type i,
        totalSize      type i,
        dsn(40)        type C,
        xstr           type xstring.
types: begin of it_mara,
            matnr like mara-matnr,
            ernam like mara-ernam,
            aenam like mara-aenam,
            vpsta like mara-vpsta,
        end of it_mara.
data: itab_mara type table of it_mara.
select matnr ernam aenam vpsta from mara into table itab_mara where
       matnr = p_matnr.
types: begin of xml_line,
        data(256) type X,
      end of xml_line.
data: xml_table type table of xml_line.
parameters: filename like rlgrap-filename.
pixml = cl_ixml=>create( ).
*-- create the initial document
pDocument = pixml->create_document( ).
pStreamFactory = pixml->create_stream_factory( ).
*-- create an input stream for the table
*pIStream = pStreamFactory->create_istream_itable( table = xml_table
                                                 size = totalSize ).
pParser = piXML->create_parser( stream_factory = pStreamFactory
                                  istream        = pIStream
                                  document       = pDocument ).
data: pOStream type ref to if_ixml_ostream.
pOStream = pStreamFactory->create_ostream_itable( table = xml_table ).
call method pDocument->render( ostream   = pOStream ).
*-- how many bytes were written to the table?
totalSize = pOStream->get_num_written_raw( ).
*-- write the XML document back to the frontend
concatenate filename '.out' into filename.
condense filename no-gaps.
CALL FUNCTION 'WS_DOWNLOAD'
     EXPORTING
          BIN_FILESIZE            = totalSize
          FILENAME                = filename
          FILETYPE                = 'BIN'
     TABLES
          DATA_TAB                = itab_mara
     EXCEPTIONS
          OTHERS                  = 11
IF SY-SUBRC <> 0.
ENDIF.
*-- print the whole DOM tree as a list...
pNode = pDocument.
perform print_node using pNode.
      FORM print_node                                               *
form print_node using value(pNode) type ref to if_ixml_node.
data: indent      type i.
data: pText       type ref to if_ixml_text.
data: string      type string.
indent = pNode->get_height( ) * 2.
case pnode->get_type( ).
    when if_ixml_node=>co_node_element.
      string = pNode->get_name( ).
      write: at /indent '<', string, '> '.
    when if_ixml_node=>co_node_text.
       pText ?= pNode->query_interface( ixml_iid_text ).
       if pText->ws_only( ) is initial.
        string = pNode->get_value( ).
        write: at /indent string.
       endif.
endcase.
pNode = pNode->get_first_child( ).
while not pNode is initial.
     perform print_node using pNode.
     pNode = pNode->get_next( ).
endwhile.
endform.
but when open the XML file which i created on the desktop it shows the following error.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
XML document must have a top level element. Error processing resource 'file:///C:/Documents and Settings/anilda/Desktop/sim...
how to rectify this error.
Regards,
satish.

You are going to need to provide more details about this shell script file you are executing and the environment it is in. Beyond being on a Windows box, you have provided none of those details.
If the SQL statement will execute cleanly in SQLDeveloper but not your script, then the issue lies in the script. How do you know the error is that SQL statement? Can your script even "select * from dual;" successfully?
Also, SQLDeveloper (which I don't use) may contain its own libraries for accessing the DB. You probably should consider upgrading to a SQL*Plus client that is at least the same version or later as your database.
Note:
As I recall, xmlgen in 9.2 is now a synonym for dbms_xmlgen. You should change the package name accordingly [url http://docs.oracle.com/cd/B10501_01/appdev.920/a96612/d_xmlge2.htm#1010709]dbms_xmlgen.getXML

Adobe Premiere Pro CC not opening an xml file created in Adobe Premiere Pro CC 2014

Hello,
I had created a project using Adobe Premiere CC 2014 which had some minor changes, which were going to be done by my boss, who uses Premiere Pro CC. However the project file of Adobe Premiere CC 2014 was not getting opened in Premiere Pro CC giving a message of type that as this file was created in a newer version of Premiere, it cannot be opened. After searching on this forum I found that we have to convert the Premiere Pro CC 2014 project file to XML file which can be then imported onto Premiere CC. So I created a XML file by selecting File-> Export -> Final Cut Pro XML and sent it to my boss. However even the xml file is not getting opened after being imported onto Premiere Pro CC giving an error of sorts, Cannot open the file since there is a problem with the codecs.
Have I done something wrong? Please guide me since I am a beginner to the Adobe environment and would very much appreciate any help.
Thank you.

Indeed..... but are they fully documented, includuing Adobe's implementation of Multicam?
Collapsing them should really be no more than a day or two of work for an Adobe engineer and a day of beta testing. Seriously. Lots of people want this - it only takes a few minutes with google to find people struggling with this exact problem. Premiere Pro Multicam --> Resolve.
Since we do a lot of multicam work it's something that's important to us.
Lots of other people never go near multicam, so I guess for them it's something they really don't care about.
I currently have > 22 hours of multicam sequences that need primary colour correction and follow on grading..... resolve would be the best choice by far.

Cannot open persistence.xml nor orm.xml

Similar Messages

Maybe you are looking for